메뉴 건너뛰기




Volumn 40, Issue 10, 2014, Pages 15371-15380

Review of mechanical characterization methods for ceramics used in energy technologies

Author keywords

C. Fracture; C. Mechanical properties; Ceramics; Oxygen transport membranes; Sealants; Solid oxide fuel cells

Indexed keywords

BIOMECHANICS; CREEP; FRACTURE MECHANICS; MECHANICAL PROPERTIES; SEALANTS;

EID: 84912575892     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2014.07.089     Document Type: Review
Times cited : (33)

References (91)
  • 4
    • 83655184686 scopus 로고    scopus 로고
    • Component interactions after long-term operation of an SOFC stack with LSM cathode
    • J. Malzbender, P. Batfalsky, R. Vaßen, V. Shemet, and F. Tietz Component interactions after long-term operation of an SOFC stack with LSM cathode J. Power Sources 201 2012 196 203
    • (2012) J. Power Sources , vol.201 , pp. 196-203
    • Malzbender, J.1    Batfalsky, P.2    Vaßen, R.3    Shemet, V.4    Tietz, F.5
  • 5
    • 84912546348 scopus 로고    scopus 로고
    • Ph.D. (thesis), RWTH Aachen
    • B. Rutkowski, Ph.D. (thesis), RWTH Aachen, 2012
    • (2012)
    • Rutkowski, B.1
  • 9
    • 84876741191 scopus 로고    scopus 로고
    • Creep behaviour of membrane and substrate materials for oxygen separation units
    • M. Lipińska-Chwałek, G. Pećanac, and J. Malzbender Creep behaviour of membrane and substrate materials for oxygen separation units J. Eur. Ceram. Soc. 33 2013 1841 1848
    • (2013) J. Eur. Ceram. Soc. , vol.33 , pp. 1841-1848
    • Lipińska-Chwałek, M.1    Pećanac, G.2    Malzbender, J.3
  • 11
    • 84874420103 scopus 로고    scopus 로고
    • Manufacturing strategies for asymmetric ceramic membranes for efficient separation of oxygen from air
    • S. Baumann, W.A. Meulenberg, and H.P. Buchkremer Manufacturing strategies for asymmetric ceramic membranes for efficient separation of oxygen from air J. Eur. Ceram. Soc. 33 2013 1251 1261
    • (2013) J. Eur. Ceram. Soc. , vol.33 , pp. 1251-1261
    • Baumann, S.1    Meulenberg, W.A.2    Buchkremer, H.P.3
  • 12
    • 79958819380 scopus 로고    scopus 로고
    • Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich
    • L. Blum, S.M. Groß, J. Malzbender, U. Pabst, M. Peksen, R. Peters, and I.C. Vinke Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich J. Power Sources 196 2011 7175 7181
    • (2011) J. Power Sources , vol.196 , pp. 7175-7181
    • Blum, L.1    Groß, S.M.2    Malzbender, J.3    Pabst, U.4    Peksen, M.5    Peters, R.6    Vinke, I.C.7
  • 14
    • 0342972908 scopus 로고    scopus 로고
    • Mechanical behaviour of ceramic oxygen ion-conducting membranes
    • A. Atkinson, and A. Selçuk Mechanical behaviour of ceramic oxygen ion-conducting membranes Solid State Ion. 134 1 2000 59 66
    • (2000) Solid State Ion. , vol.134 , Issue.1 , pp. 59-66
    • Atkinson, A.1    Selçuk, A.2
  • 15
    • 84899067150 scopus 로고    scopus 로고
    • Mechanical properties of porous MgO substrates for membrane applications
    • M. Lipińska-Chwałek, L. Kiesel, and J. Malzbender Mechanical properties of porous MgO substrates for membrane applications J. Eur. Cer. Soc. 34 2014 2519 2524
    • (2014) J. Eur. Cer. Soc. , vol.34 , pp. 2519-2524
    • Lipińska-Chwałek, M.1    Kiesel, L.2    Malzbender, J.3
  • 18
    • 33846698236 scopus 로고    scopus 로고
    • Fracture test of thin sheet electrolytes for solid oxide fuel cells
    • J. Malzbender, and R.W. Steinbrech Fracture test of thin sheet electrolytes for solid oxide fuel cells J. Euro. Ceram. Soc. 27 2007 2597 2603
    • (2007) J. Euro. Ceram. Soc. , vol.27 , pp. 2597-2603
    • Malzbender, J.1    Steinbrech, R.W.2
  • 19
    • 34547658964 scopus 로고    scopus 로고
    • Mechanical properties of magnesia-spinel composites
    • A. Atkinson, P. Bastid, and Q. Liu Mechanical properties of magnesia-spinel composites J. Am. Ceram. Soc. 90 2007 2489 2496
    • (2007) J. Am. Ceram. Soc. , vol.90 , pp. 2489-2496
    • Atkinson, A.1    Bastid, P.2    Liu, Q.3
  • 20
    • 84987266075 scopus 로고
    • A statistical distribution function of wide applicability
    • W. Weibull A statistical distribution function of wide applicability J. Appl. Mech. 18 1951 293 297
    • (1951) J. Appl. Mech. , vol.18 , pp. 293-297
    • Weibull, W.1
  • 21
    • 78650309791 scopus 로고    scopus 로고
    • The effect of room temperature and high temperature exposure on the elastic modulus, hardness and fracture toughness of glass ceramic sealants for solid oxide fuel cells
    • Y. Zhao, J. Malzbender, and S.M. Gross The effect of room temperature and high temperature exposure on the elastic modulus, hardness and fracture toughness of glass ceramic sealants for solid oxide fuel cells J. Euro. Ceram. Soc. 31 2011 541 548
    • (2011) J. Euro. Ceram. Soc. , vol.31 , pp. 541-548
    • Zhao, Y.1    Malzbender, J.2    Gross, S.M.3
  • 22
    • 84881514828 scopus 로고    scopus 로고
    • Damage and failure of silver based ceramic/metal joints for SOFC Stacks
    • T. Bause, J. Malzbender, M. Pausch, T. Beck, and L. Singheiser Damage and failure of silver based ceramic/metal joints for SOFC Stacks Fuel Cells 13 2013 578 583
    • (2013) Fuel Cells , vol.13 , pp. 578-583
    • Bause, T.1    Malzbender, J.2    Pausch, M.3    Beck, T.4    Singheiser, L.5
  • 24
    • 17544386518 scopus 로고    scopus 로고
    • Solid oxide fuel cells for stationary, mobile, and military applications
    • S.C. Singhal Solid oxide fuel cells for stationary, mobile, and military applications Solid State Ion. 152 2002 405 410
    • (2002) Solid State Ion. , vol.152 , pp. 405-410
    • Singhal, S.C.1
  • 25
    • 84857593853 scopus 로고    scopus 로고
    • Design of a mixed ionic/electronic conducting oxygen transport membrane pilot module
    • E.M. Pfaff, A. Kaletsch, and C. Broeckmann Design of a mixed ionic/electronic conducting oxygen transport membrane pilot module Chem. Eng. Technol. 35 2012 455 463
    • (2012) Chem. Eng. Technol. , vol.35 , pp. 455-463
    • Pfaff, E.M.1    Kaletsch, A.2    Broeckmann, C.3
  • 26
    • 0037411745 scopus 로고    scopus 로고
    • Comment on hardness definitions
    • J. Malzbender Comment on hardness definitions J. Euro. Ceram. Soc. 23 2003 1355 1359
    • (2003) J. Euro. Ceram. Soc. , vol.23 , pp. 1355-1359
    • Malzbender, J.1
  • 27
    • 0034275422 scopus 로고    scopus 로고
    • Determination of the elastic modulus and hardness of sol-gel coatings on glass: Influence of indenter geometry
    • J. Malzbender, G. de With, and J.M.J. den Toonder Determination of the elastic modulus and hardness of sol-gel coatings on glass: influence of indenter geometry Thin Solid Films 372 2000 134 143
    • (2000) Thin Solid Films , vol.372 , pp. 134-143
    • Malzbender, J.1    De With, G.2    Den Toonder, J.M.J.3
  • 28
    • 75649137227 scopus 로고    scopus 로고
    • Introduction to instrumented indentation testing
    • J. Hay Introduction to instrumented indentation testing Exp. Tech. 33 2009 66 72
    • (2009) Exp. Tech. , vol.33 , pp. 66-72
    • Hay, J.1
  • 29
    • 0141837135 scopus 로고    scopus 로고
    • Determination of the stress-dependent stiffness of plasma-sprayed thermal barrier coatings using depth-sensitive indentation
    • J. Malzbender, and R.W. Steinbrech Determination of the stress-dependent stiffness of plasma-sprayed thermal barrier coatings using depth-sensitive indentation J. Mater. Res. 18 2003 1975 1984
    • (2003) J. Mater. Res. , vol.18 , pp. 1975-1984
    • Malzbender, J.1    Steinbrech, R.W.2
  • 30
    • 0006413070 scopus 로고    scopus 로고
    • Hardness of a surface containing uniformly spaced pyramidal asperities
    • M.S. Bobji, and S.K. Biswas Hardness of a surface containing uniformly spaced pyramidal asperities Trib. Lett. 7 1999 51 56
    • (1999) Trib. Lett. , vol.7 , pp. 51-56
    • Bobji, M.S.1    Biswas, S.K.2
  • 31
    • 0001680427 scopus 로고    scopus 로고
    • Elastic properties of ceramic oxides used in Solid Oxide Fuel Cells (SOFC)
    • A. Selçuk, and A. Atkinson Elastic properties of ceramic oxides used in Solid Oxide Fuel Cells (SOFC) J. Eur. Ceram. Soc. 17 1997 1523 1532
    • (1997) J. Eur. Ceram. Soc. , vol.17 , pp. 1523-1532
    • Selçuk, A.1    Atkinson, A.2
  • 32
    • 0033939138 scopus 로고    scopus 로고
    • The use of the loading curve to assess soft coatings
    • J. Malzbender, and G. de With The use of the loading curve to assess soft coatings Surf. Coat. Technol. 127 2000 265 272
    • (2000) Surf. Coat. Technol. , vol.127 , pp. 265-272
    • Malzbender, J.1    De With, G.2
  • 33
    • 84987335986 scopus 로고
    • A critical-evaluation of indentation techniques for measuring fracture-;toughness. 1. Direct crack measurements
    • G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall A critical-evaluation of indentation techniques for measuring fracture-;toughness. 1. Direct crack measurements J. Am. Ceram. Soc. 64 1981 533 538
    • (1981) J. Am. Ceram. Soc. , vol.64 , pp. 533-538
    • Anstis, G.R.1    Chantikul, P.2    Lawn, B.R.3    Marshall, D.B.4
  • 34
    • 0024733853 scopus 로고
    • Vickers indentation fracture toughness test. Part 1. Review of literature and formulation of standardised indentation toughness equations
    • C.B. Ponton, and R.D. Rawlings Vickers indentation fracture toughness test. Part 1. Review of literature and formulation of standardised indentation toughness equations Mater. Sci. Technol. 5 1989 865 872
    • (1989) Mater. Sci. Technol. , vol.5 , pp. 865-872
    • Ponton, C.B.1    Rawlings, R.D.2
  • 35
    • 33847754280 scopus 로고    scopus 로고
    • On the Vickers indentation fracture toughness test
    • G.D. Quinn, and R.C. Bradt On the Vickers indentation fracture toughness test J. Am. Ceram. Soc. 90 2007 673 680
    • (2007) J. Am. Ceram. Soc. , vol.90 , pp. 673-680
    • Quinn, G.D.1    Bradt, R.C.2
  • 36
    • 0032678633 scopus 로고    scopus 로고
    • Determining indentation toughness by incorporating true hardness into fracture mechanics equations
    • J. Gong Determining indentation toughness by incorporating true hardness into fracture mechanics equations J. Eur. Ceram. Soc. 19 1999 1585 1592
    • (1999) J. Eur. Ceram. Soc. , vol.19 , pp. 1585-1592
    • Gong, J.1
  • 38
    • 84862784612 scopus 로고    scopus 로고
    • Micromechanical testing of glass-ceramic sealants for solid oxide fuel cells
    • J. Malzbender, and Y. Zhao Micromechanical testing of glass-ceramic sealants for solid oxide fuel cells J. Mater. Sci.e 47 2013 4342 4347
    • (2013) J. Mater. Sci.E , vol.47 , pp. 4342-4347
    • Malzbender, J.1    Zhao, Y.2
  • 39
    • 67649405985 scopus 로고    scopus 로고
    • Experimental characterization of glass-ceramic seal properties and their constitutive implementation in solid oxide fuel cell stack models
    • E.V. Stephens, J.S. Vetrano, B.J. Koeppel, Y. Chou, X. Sun, and M.A. Khaleel Experimental characterization of glass-ceramic seal properties and their constitutive implementation in solid oxide fuel cell stack models J Power Sources 193 2009 625 631
    • (2009) J Power Sources , vol.193 , pp. 625-631
    • Stephens, E.V.1    Vetrano, J.S.2    Koeppel, B.J.3    Chou, Y.4    Sun, X.5    Khaleel, M.A.6
  • 40
    • 84912546346 scopus 로고    scopus 로고
    • PhD (thesis), RWTH Aachen
    • Y. Zhao, PhD (thesis), RWTH Aachen, 2013.
    • (2013)
    • Zhao, Y.1
  • 43
    • 1542336964 scopus 로고    scopus 로고
    • Mechanical and thermal stresses in multilayered materials
    • J. Malzbender Mechanical and thermal stresses in multilayered materials J. Appl. Phys. 95 2004 1780 1782
    • (2004) J. Appl. Phys. , vol.95 , pp. 1780-1782
    • Malzbender, J.1
  • 46
    • 0017019398 scopus 로고
    • The brittle ring test: A method for measuring strength and Youngs modulus on coatings of HTR fuel particles
    • K. Bongartz, E. Gyarmati, H. Schuster, and K. Täuber The brittle ring test: a method for measuring strength and Youngs modulus on coatings of HTR fuel particles J. Nucl. Mater. 62 1976 123 137
    • (1976) J. Nucl. Mater. , vol.62 , pp. 123-137
    • Bongartz, K.1    Gyarmati, E.2    Schuster, H.3    Täuber, K.4
  • 47
    • 84892482151 scopus 로고    scopus 로고
    • Strength characterization of tubular ceramic materials by flexure of semi-cylindrical specimens
    • K. Kwok, L. Kiesel, H.L. Frandsen, M. Søgaard, and P.V. Hendriksen Strength characterization of tubular ceramic materials by flexure of semi-cylindrical specimens J. Eur. Ceram. Soc. 34 2014 1423 1432
    • (2014) J. Eur. Ceram. Soc. , vol.34 , pp. 1423-1432
    • Kwok, K.1    Kiesel, L.2    Frandsen, H.L.3    Søgaard, M.4    Hendriksen, P.V.5
  • 49
    • 79959242543 scopus 로고    scopus 로고
    • Ring-on-ring testing of thin, curved bi-layered materials
    • G. Pećanac, T. Bause, and J. Malzbender Ring-on-ring testing of thin, curved bi-layered materials J. Eur. Ceram. Soc. 31 2011 2037 2042
    • (2011) J. Eur. Ceram. Soc. , vol.31 , pp. 2037-2042
    • Pećanac, G.1    Bause, T.2    Malzbender, J.3
  • 51
    • 84897781977 scopus 로고    scopus 로고
    • High throughput measurement of high temperature strength of ceramics in controlled atmosphere and its use on solid oxide fuel cell anode supports
    • H.L. Frandsen, D.J. Curran, S. Rasmussen, and P.V. Hendriksen High throughput measurement of high temperature strength of ceramics in controlled atmosphere and its use on solid oxide fuel cell anode supports J Power Sources 258 2014 195 203
    • (2014) J Power Sources , vol.258 , pp. 195-203
    • Frandsen, H.L.1    Curran, D.J.2    Rasmussen, S.3    Hendriksen, P.V.4
  • 53
    • 20444473104 scopus 로고    scopus 로고
    • Comparison of methodologies for determination of fracture strength of 8 mol% yttria-stabilized zirconia electrolyte materials
    • K. An, H.G. Halverson, K.L. Reifsnider, S.W. Case, and M.H. McCord Comparison of methodologies for determination of fracture strength of 8 mol% yttria-stabilized zirconia electrolyte materials J. Fuel Cell Sci. Technol. 2 2004 99 103
    • (2004) J. Fuel Cell Sci. Technol. , vol.2 , pp. 99-103
    • An, K.1    Halverson, H.G.2    Reifsnider, K.L.3    Case, S.W.4    McCord, M.H.5
  • 54
    • 33751222248 scopus 로고    scopus 로고
    • The ball on three balls test-Strength and failure analysis of different materials
    • R. Danzer, W. Harrer, P. Supancic, T. Lube, Z. Wang, and A. Börger The ball on three balls test-Strength and failure analysis of different materials J. Eur. Ceram. Soc. 27 2007 1481 1485
    • (2007) J. Eur. Ceram. Soc. , vol.27 , pp. 1481-1485
    • Danzer, R.1    Harrer, W.2    Supancic, P.3    Lube, T.4    Wang, Z.5    Börger, A.6
  • 55
    • 73549086767 scopus 로고    scopus 로고
    • A review of advanced techniques for characterising SOFC behaviour
    • J. Malzbender, R.W. Steinbrech, and L. Singheiser A review of advanced techniques for characterising SOFC behaviour Fuel Cells 9 2009 785 793
    • (2009) Fuel Cells , vol.9 , pp. 785-793
    • Malzbender, J.1    Steinbrech, R.W.2    Singheiser, L.3
  • 56
    • 84890097428 scopus 로고    scopus 로고
    • Residual stress assessment for thin 8YSZ electrolytes using focused ion beam milling and digital image correlation
    • J. Malzbender, and T. Van Gestel Residual stress assessment for thin 8YSZ electrolytes using focused ion beam milling and digital image correlation Fuel Cells 13 2013 1076 1079
    • (2013) Fuel Cells , vol.13 , pp. 1076-1079
    • Malzbender, J.1    Van Gestel, T.2
  • 57
    • 33646266275 scopus 로고    scopus 로고
    • Curvature of planar solid oxide fuel cells during sealing and cooling of stacks
    • J. Malzbender, T. Wakui, and R.W. Steinbrech Curvature of planar solid oxide fuel cells during sealing and cooling of stacks Fuel Cells 6 2006 123 129
    • (2006) Fuel Cells , vol.6 , pp. 123-129
    • Malzbender, J.1    Wakui, T.2    Steinbrech, R.W.3
  • 58
    • 35448988031 scopus 로고    scopus 로고
    • Threshold fracture stress of thin ceramic components
    • J. Malzbender, and R.W. Steinbrech Threshold fracture stress of thin ceramic components J. Euro. Ceram. Soc. 28 2008 247 252
    • (2008) J. Euro. Ceram. Soc. , vol.28 , pp. 247-252
    • Malzbender, J.1    Steinbrech, R.W.2
  • 59
    • 84912546345 scopus 로고    scopus 로고
    • (PhD thesis), RWTH Aachen
    • G. Pećanac, (PhD thesis), RWTH Aachen, 2012.
    • (2012)
    • Pećanac, G.1
  • 60
    • 0344495542 scopus 로고    scopus 로고
    • Guidelines for the Testing of Plates
    • J. Salem Guidelines for the Testing of Plates CESP 24 4 2008 357 364
    • (2008) CESP , vol.24 , Issue.4 , pp. 357-364
    • Salem, J.1
  • 61
    • 20844448560 scopus 로고    scopus 로고
    • Flexure strength, fracture toughness, and slow crack growth of YSZ/alumina composites at high temperatures
    • S.R. Choi, and N.P. Bansal Flexure strength, fracture toughness, and slow crack growth of YSZ/alumina composites at high temperatures J. Am. Ceram. Soc. 88 2005 1474 1480
    • (2005) J. Am. Ceram. Soc. , vol.88 , pp. 1474-1480
    • Choi, S.R.1    Bansal, N.P.2
  • 62
    • 0024016154 scopus 로고
    • Evaluation of fracture toughness for ceramic materials by a single-edge-precracked-beam method
    • T. Nose, and T. Fujii Evaluation of fracture toughness for ceramic materials by a single-edge-precracked-beam method J. Am. Ceram. Soc. 71 1988 328 333
    • (1988) J. Am. Ceram. Soc. , vol.71 , pp. 328-333
    • Nose, T.1    Fujii, T.2
  • 63
    • 84987335986 scopus 로고
    • A critical-evaluation of indentation techniques for measuring fracture-toughness. 2. Strength method
    • P. Chantikul, G.R. Anstis, B.R. Lawn, and D.B. Marshall A critical-evaluation of indentation techniques for measuring fracture-toughness. 2. Strength method J. Am. Ceram. Soc. 64 1981 539 543
    • (1981) J. Am. Ceram. Soc. , vol.64 , pp. 539-543
    • Chantikul, P.1    Anstis, G.R.2    Lawn, B.R.3    Marshall, D.B.4
  • 64
    • 84871479262 scopus 로고    scopus 로고
    • Grain size effect on the mechanical properties of transparent spinel ceramics
    • O. Tokariev, L. Schnetter, T. Beck, and J. Malzbender Grain size effect on the mechanical properties of transparent spinel ceramics J. Eur. Ceram. Soc. 33 2013 749 757
    • (2013) J. Eur. Ceram. Soc. , vol.33 , pp. 749-757
    • Tokariev, O.1    Schnetter, L.2    Beck, T.3    Malzbender, J.4
  • 66
    • 7444250907 scopus 로고    scopus 로고
    • Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen
    • M. Radovic, and E. Lara-Curzio Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen Acta Materi. 52 2004 5747 5756
    • (2004) Acta Materi. , vol.52 , pp. 5747-5756
    • Radovic, M.1    Lara-Curzio, E.2
  • 67
    • 84912546344 scopus 로고    scopus 로고
    • Mechanical properties of sealants and cells
    • J. Wei, G. Pećanac, J. Malzbender, Mechanical properties of sealants and cells, in: Proceedings of the Luzern SOFCS/SOEC Forum, 2014, A1413.
    • (2014) Proceedings of the Luzern SOFCS/SOEC Forum , pp. A1413
    • Wei, J.1
  • 68
    • 77955926190 scopus 로고    scopus 로고
    • Fracture properties of nickel-based anodes for solid oxide fuel cells
    • S. Goutianos, H.L. Frandsen, and B.F. Sørensen Fracture properties of nickel-based anodes for solid oxide fuel cells J. Eur. Ceram. Soc. 30 2010 3173 3179
    • (2010) J. Eur. Ceram. Soc. , vol.30 , pp. 3173-3179
    • Goutianos, S.1    Frandsen, H.L.2    Sørensen, B.F.3
  • 69
    • 79956300117 scopus 로고    scopus 로고
    • Effect of Laves phase strengthening on the mechanical properties of high Cr ferritic steels for solid oxide fuel cell interconnect application
    • B. Kuhn, C. Asensio Jimenez, L. Niewolak, T. Hüttel, T. Beck, H. Hattendorf, L. Singheiser, and W.J. Quadakkers Effect of Laves phase strengthening on the mechanical properties of high Cr ferritic steels for solid oxide fuel cell interconnect application Mater. Sci. Eng.: A 528 2011 5888 5899
    • (2011) Mater. Sci. Eng.: A , vol.528 , pp. 5888-5899
    • Kuhn, B.1    Asensio Jimenez, C.2    Niewolak, L.3    Hüttel, T.4    Beck, T.5    Hattendorf, H.6    Singheiser, L.7    Quadakkers, W.J.8
  • 70
    • 79955471247 scopus 로고    scopus 로고
    • Creep behaviour of porous SOFC electrodes: Measurement and application to Ni-8YSZ cermets
    • J. Laurencin, G. Delette, F. Usseglio-Viretta, and S. Di Iorio Creep behaviour of porous SOFC electrodes: measurement and application to Ni-8YSZ cermets J. Eur. Ceram. Soc. 31 2011 1741 1752
    • (2011) J. Eur. Ceram. Soc. , vol.31 , pp. 1741-1752
    • Laurencin, J.1    Delette, G.2    Usseglio-Viretta, F.3    Di Iorio, S.4
  • 71
    • 84877329028 scopus 로고    scopus 로고
    • Elevated temperature effects on the mechanical properties of solid oxide fuel cell sealing materials
    • Y. Zhao, and J. Malzbender Elevated temperature effects on the mechanical properties of solid oxide fuel cell sealing materials J. Power Sources 239 2013 500 504
    • (2013) J. Power Sources , vol.239 , pp. 500-504
    • Zhao, Y.1    Malzbender, J.2
  • 72
    • 33644979934 scopus 로고    scopus 로고
    • Strain dependent stiffness of plasma sprayed thermal barrier coatings
    • T. Wakui, J. Malzbender, and R.W. Steinbrech Strain dependent stiffness of plasma sprayed thermal barrier coatings Surf. Coat. Technol. 200 2006 4995 5002
    • (2006) Surf. Coat. Technol. , vol.200 , pp. 4995-5002
    • Wakui, T.1    Malzbender, J.2    Steinbrech, R.W.3
  • 73
    • 84889024588 scopus 로고    scopus 로고
    • Stress analysis and fail-safe design of bilayered tubular supported ceramic membranes
    • K. Kwok, H.L. Frandsen, M. Søgaard, and P.V. Hendriksen' Stress analysis and fail-safe design of bilayered tubular supported ceramic membranes J. Membr. Sci. 453 2014 253 262
    • (2014) J. Membr. Sci. , vol.453 , pp. 253-262
    • Kwok, K.1    Frandsen, H.L.2    Søgaard, M.3    Hendriksen, P.V.4
  • 75
    • 84883291187 scopus 로고    scopus 로고
    • Fracture and creep of glass-ceramic solid oxide fuel cell sealant materials
    • J. Malzbender, Y. Zhao, and T. Beck Fracture and creep of glass-ceramic solid oxide fuel cell sealant materials J. Power Sources 246 2014 574 580
    • (2014) J. Power Sources , vol.246 , pp. 574-580
    • Malzbender, J.1    Zhao, Y.2    Beck, T.3
  • 77
    • 1542757539 scopus 로고    scopus 로고
    • Comparison of different experimental techniques for determination of elastic properties of solids
    • M. Radovic, E. Lara-Curzio, and L. Rieste Comparison of different experimental techniques for determination of elastic properties of solids Mater Sci. Eng. A 368 2004 56 70
    • (2004) Mater Sci. Eng. A , vol.368 , pp. 56-70
    • Radovic, M.1    Lara-Curzio, E.2    Rieste, L.3
  • 78
    • 84912546343 scopus 로고    scopus 로고
    • (Ph.D thesis), RWTH Aachen
    • T. Bause, (Ph.D thesis), RWTH Aachen, 2012.
    • (2012)
    • Bause, T.1
  • 79
    • 84912546342 scopus 로고    scopus 로고
    • (Ph.D thesis), RWTH Aachen
    • V. Vasechko, (Ph.D thesis), RWTH Aachen, 2014.
    • (2014)
    • Vasechko, V.1
  • 81
    • 84881520519 scopus 로고    scopus 로고
    • Mechanical Characteristics of electrolytes assessed with resonant ultrasound spectroscopy
    • W. Araki, H. Azuma, T. Yota, Y. Arai, and J. Malzbender Mechanical Characteristics of electrolytes assessed with resonant ultrasound spectroscopy Fuel Cells 13 2013 542 548
    • (2013) Fuel Cells , vol.13 , pp. 542-548
    • Araki, W.1    Azuma, H.2    Yota, T.3    Arai, Y.4    Malzbender, J.5
  • 82
    • 84899088600 scopus 로고    scopus 로고
    • Porous LSCF/dense 3YSZ interface fracture toughness measured by single cantilever beam wedge test
    • X. Wang, F. He, Z. Chen, and A. Atkinson Porous LSCF/dense 3YSZ interface fracture toughness measured by single cantilever beam wedge test J. Eur. Ceram. Soc. 34 2014 2351 2361
    • (2014) J. Eur. Ceram. Soc. , vol.34 , pp. 2351-2361
    • Wang, X.1    He, F.2    Chen, Z.3    Atkinson, A.4
  • 83
    • 84887002912 scopus 로고    scopus 로고
    • Fracture toughness of glass sealants for solid oxide fuel cell application
    • H. Abdoli, P. Alizadeh, D. Boccaccini, and K. Agersted Fracture toughness of glass sealants for solid oxide fuel cell application Mater. Lett. 115 2014 75 78
    • (2014) Mater. Lett. , vol.115 , pp. 75-78
    • Abdoli, H.1    Alizadeh, P.2    Boccaccini, D.3    Agersted, K.4
  • 84
    • 0037819712 scopus 로고    scopus 로고
    • Determination of the interfacial fracture energies of cathodes and glass ceramic sealants in a planar solid-oxide fuel cell design
    • J. Malzbender, R.W. Steinbrech, and L. Singheiser Determination of the interfacial fracture energies of cathodes and glass ceramic sealants in a planar solid-oxide fuel cell design J. Mate.r Res. 18 2004 929 934
    • (2004) J. Mate.r Res. , vol.18 , pp. 929-934
    • Malzbender, J.1    Steinbrech, R.W.2    Singheiser, L.3
  • 85
    • 0035151763 scopus 로고    scopus 로고
    • Scratch testing of hybrid coatings on glass
    • J. Malzbender, and G. de With Scratch testing of hybrid coatings on glass Surf. Coat. Technol. 135 2001 202
    • (2001) Surf. Coat. Technol. , vol.135 , pp. 202
    • Malzbender, J.1    De With, G.2
  • 87
    • 66849122518 scopus 로고    scopus 로고
    • Mechanical performance of reactive-air-brazed (RAB) ceramic/metal joints for solid oxide fuel cells at ambient temperature
    • B. Kuhn, F.J. Wetzel, J. Malzbender, R.W. Steinbrech, and L. Singheiser Mechanical performance of reactive-air-brazed (RAB) ceramic/metal joints for solid oxide fuel cells at ambient temperature J. Power Sources 193 2009 199 202
    • (2009) J. Power Sources , vol.193 , pp. 199-202
    • Kuhn, B.1    Wetzel, F.J.2    Malzbender, J.3    Steinbrech, R.W.4    Singheiser, L.5
  • 88
    • 77955466813 scopus 로고    scopus 로고
    • Comparison of shear strength tests on AV119 epoxy-joined ceramics
    • A. Ventrella, M. Salvo, M. Avalle, and M. Ferraris Comparison of shear strength tests on AV119 epoxy-joined ceramics J. Mater. Sci. 45 2010 4401 4405
    • (2010) J. Mater. Sci. , vol.45 , pp. 4401-4405
    • Ventrella, A.1    Salvo, M.2    Avalle, M.3    Ferraris, M.4
  • 91
    • 84898071097 scopus 로고    scopus 로고
    • Modeling of chemical-mechanical couplings in anode-supported solid oxide fuel cells and reliability analysis
    • X. Jin, and X. Xue Modeling of chemical-mechanical couplings in anode-supported solid oxide fuel cells and reliability analysis RSC Adv. 4 2014 15782 15796
    • (2014) RSC Adv. , vol.4 , pp. 15782-15796
    • Jin, X.1    Xue, X.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.