Creep behaviour of porous SOFC electrodes: Measurement and application to Ni-8YSZ cermets

Journal of the European Ceramic Society

Volumn 31, Issue 9, 2011, Pages 1741-1752

  Laurencin, J ^a   Delette, G ^a   Usseglio Viretta, F ^a   Di Iorio, S ^a  

^a CEA GRENOBLE   (France)

Author keywords

Cermet; Creep; Four point bending test; Ni 8YSZ; Solid oxide fuel cell (SOFC)

Indexed keywords

ANODE SUPPORTED CELL; CREEP BEHAVIOUR; CREEP EXPONENTS; CREEP MECHANISM; CREEP PROPERTIES; CREEP STRAIN; CREEP STRAIN RATE; FOUR-POINT BENDING TEST; HIGH TEMPERATURE; INTERNAL STRESS; LOCAL STRESS; LOW TEMPERATURES; MATRIX; MECHANICAL TESTS; METALLIC PHASE; NI-8YSZ; NUMERICAL MODELLING; OPERATING TEMPERATURE; PLASTIC STRAIN; POROUS NI; REDUCING ATMOSPHERE; STRESS DECREASE; THIN ELECTROLYTES;

ACTIVATION ENERGY; ATMOSPHERIC TEMPERATURE; BENDING TESTS; CREEP; FIBER OPTIC SENSORS; METALLIC MATRIX COMPOSITES; SOLID OXIDE FUEL CELLS (SOFC); STRAIN RATE; ZIRCONIUM;

CERMETS;

EID: 79955471247     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2011.02.036     Document Type: Article

References (45)

1. Singhal S.C., Kendall K. High temperatures solid oxide fuel cells 2003, Elsevier, Oxford, p. 17. S.C. Singhal, K. Kendall (Eds.).
2. Suzuki M., Iwata S., Higaki K., Inoue S., Shigehisa T., Shigehisa T., et al. Development and field test results of residential SOFC CHP system. ECS Trans. 2009, 25(2):143-147.
3. Föger K. Commercialisation of CFCL's Residential Power Station - BlueGen. The 9th European Fuel Cell Forum (Switzerland) Chapter 2 2010, 22-28.
4. Hody S., Amérigo C. Test of the integrated SOFC micro-CHP boiler developed by De Dietrich Thermique and Ceramic Fuel Cells Ltd. The 9th European Fuel Cell Forum (Switzerland) Chapter 2 2010, 40-48.
5. Sarantaridis D., Atkinson A. Redox cycling of Ni-based solid oxide fuel cell anodes. Fuel Cells 2007, 3:246-258.
6. Ettler M., Timmermann H., Malzbender J., Weber A., Menzler N.H. Durability of Ni anodes during reoxidation cycles. J. Power Sources 2010, 195:5452-5467.
7. Laurencin J., Delette G., Morel B., Lefebvre-Joud F., Dupeux M. Solid oxide fuel cells damage mechanisms due to Ni-YSZ re-oxidation: case of the anode supported cell. J. Power Sources 2009, 192:344-352.
8. Laurencin J., Delette G., Sicardy O., Rosini S., Lefebvre-Joud F. Impact of 'redox' cycles on performances of solid oxide fuel cells: case of the electrolyte supported cells. J. Power Sources 2010, 195:2747-2753.
9. Laurencin J., Lefebvre-Joud F., Delette G. Impact of cell design and operating conditions on the performances of SOFC fuelled with methane. J. Power Sources 2008, 177:355-368.
10. Basu R.N., Blass G., Buchkremer H.P., Stöver D., Tietz F., Wessel E., et al. Simplified processing of anode-supported thin film planar solid oxide fuel cells. J. Eur. Ceram. Soc. 2005, 25:463-471.
11. Fischer W., Malzbender J., Blass G., Steinbrech R.W. Residual stresses in planar solid oxide fuel cells. J. Power Sources 2005, 150:73-77.
12. Malzbender J., Fischer W., Steinbrech R.W. Studies of residual stresses in planar solid oxide fuel cells. J. Power Sources 2008, 182:594-598.
13. Laurencin J., Delette G., Lefebvre-Joud F., Dupeux M. A numerical tool to estimate SOFC mechanical degradation: case of the planar cell configuration. J. Eur. Ceram. Soc. 2008, 28:1857-1869.
14. Morales-Rodríguez A., Bravo-León A., Domínguez-Rodríguez A., López-Esteban S., Moya J.S., Jiménez-Melendo M. High-temperature mechanical properties of zirconia/nickel composites. J. Eur. Ceram. Soc. 2003, 23:2849-2856.
15. Morales-Rodríguez A., Bravo-León A., Domínguez-Rodríguez A., Jiménez-Melendo M. High-temperature plastic behavior of TZP-Ni cermets. J. Am. Ceram. Soc. 2008, 91(2):500-507.
16. Gutierrez-Mora F., Ralph J.M., Routbort J.L. High-temperature mechanical properties of anode-supported bilayers. Solid State Ionics 2002, 149:177-184.
17. Sarantaridis D., Chater R.J., Atkinson A. Changes in physical and mechanical properties of SOFC Ni-YSZ composites caused by redox cycling. J. Electrochem. Soc. 2008, 155(5):B467-B472.
18. Zhu D., Miller R.A. Sintering and creep behavior of plasma-sprayed zirconia- and hafnia-based thermal barrier coatings. Surf. Coat. Technol. 1998, 108/109:114-120.
19. Zhu, D. and Miller, R. A., Determination of creep behaviour of thermal barrier coatings under laser imposed temperature and stress gradients. NASA technical memorandum 113169, ARL-TR-1565.
20. Soltani R., Coyle T.W., Mostaghimi J. Creep behavior of plasma-sprayed zirconia thermal barrier coatings. J. Am. Ceram. Soc. 2007, 90(9):2873-2878.
21. Ahrens M., Lampenscherf S., Vaßen R., Stöver X. Sintering and creep processes in plasma-sprayed thermal barrier coatings. J. Thermal Spray Technol. 2004, 13(3):432-442.
22. Hollenberg G.W., Terwilliger G.R., Gordon R.S. Calculation of stresses and strains in four-point bending creep tests. J. Am. Ceram Soc. 1971, 54(4):196-199.
23. Selçuk A., Atkinson A. Strength and toughness of tape-cast yttria stabilized zirconia. J. Am. Ceram. Soc. 2000, 83(8):2029-2035.
24. Ding J.L. Numerical study of time dependent behaviour of GN-10 structural ceramics in bend creep test. J. Mater. Sci. 2002, 37:4165-4180.
25. Young W.C., Budynas R.G. Roak's Formulas for Stress and Strain 2002, Mc Graw Hill, p. 126. 7th ed.
26. Besson J., Cailletaud G., Chaboche J.L., Forest S. Mécanique non linéaire des matériaux 2001, Hermes, p. 84.
27. Delette, G. and Giraud, H., Investigation of the electrolyte robustness. CEA/DTH report, Real-SOFC EU project, WP 1.5.4.
28. Sun B., Rudkin R.A., Atkinson A. Effect of thermal cycling on residual stress and curvature of anode-supported SOFCs. Fuel Cells 2009, 9(6):805-813.
29. Haussonne J.-M., Carry C., Bowen P., Barton J. Céramiques et verres, Principes et techniques d'élaboration 2005, 16. Presses polytechniques et universitaires romandes, p. 465.
30. Rice R.W. Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations. J. Mater. Sci. 1993, 28:2187-2190.
31. Pihlatie M.H., Frandsen H.L., Kaiser A., Mogensen M. Continuum mechanics simulations of NiO/Ni-YSZ composites during reduction and re-oxidation. J. Power Sources 2010, 195:2677-2690.
32. Poirier J.P. Plasticité à haute température des solides cristallins 1976, Eyrolles, p. 172.
33. Raj R., Ashby M.F. On grain boundary sliding and diffusional creep. Metall. Trans. 1971, 2:1113-1127.
34. Frost H.J., Ashby M.F. Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics 1982, Pergamon press, Oxford.
35. 2-x/2 single crystals with 0.5≤x≤0.48. J. Eur. Ceram. Soc. 2000, 20:2069-2077.
36. Chokshi Atul H. Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia. Scr. Mater. 2003, 48:791-796.
37. 2-x/2 (x=0.17). Ceram. Trans. 1991, 24:175-184.
38. Suárez G., Garrido L.B., Aglietti E.F. Sintering kinetics of 8Y-cubic zirconia: cation diffusion coefficient. Mater. Chem. Phys. 2008, 110:370-375.
39. Cannon W.R., Langdon T.G. Review, creep of ceramics, part 2: an examination of flow mechanisms. J. Mater. Sci. 1988, 23:1-20.
40. 3 polycrystals. J. Eur. Ceram. Soc. 2000, 20:285-296.
41. 2/mullite plasma-sprayed composite coatings for increased creep resistance. J. Eur. Ceram. Soc. 2007, 27:4675-4683.
42. 2 thermal barriers coatings. Mater. Sci. Eng. 1997, A233:176-182.
43. Erk K.A., Deschaseaux C., Trice R.W. Grain-boundary grooving of plasma-sprayed yttria-stabilized zirconia thermal barrier coatings. J. Am. Ceram. Soc. 2006, 89(5):1673-1678.
44. Jiménez-Melendo M., Domínguez-Rodríguez A., Castaing J., Marquez R. Diffusion and creep: application to deformation maps on NiO. Scr. Metall. 1986, 20:739-742.
45. Nakajo A., Stiller C., Härkegård G., Bolland O. Modeling of thermal stresses and probability of survival of tubular SOFC. J. Power Sources 2006, 158:287-294.