Mechanical properties of porous MgO substrates for membrane applications

Journal of the European Ceramic Society

Volumn 34, Issue 10, 2014, Pages 2519-2524

  Lipinska Chwalek M ^a   Kiesel, L ^b   Malzbender, J ^a  

^a FORSCHUNGSZENTRUM JÜLICH   (Germany)

^b FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS   (Germany)

Author keywords

Elasticity; Mechanical properties; Membranes; Porosity; Strength

Indexed keywords

CERAMIC MEMBRANES; DESIGN; ELASTIC MODULI; ELASTICITY; MAGNESIA; MECHANICAL PROPERTIES; MEMBRANES; POROSITY; SINTERING; SUBSTRATES;

LONG TERM PERFORMANCE; MECHANICAL PARAMETERS; PLANAR GEOMETRIES; POROUS SUBSTRATES; SINTERING CONDITION; STRENGTH; SUPPORT MATERIALS; THERMO MECHANICAL LOADS;

FRACTURE;

EID: 84899067150     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2014.03.009     Document Type: Article

References (32)

1. Kaiser A., Foghmoes S., Chatzichristodoulou C., Søgaard M., Glasscock J.A., Frandsen H.L., et al. Evaluation of thin film ceria membranes for syngas membrane reactors - preparation, characterization and testing. J Membr Sci 2011, 378:51-60.
2. Wang H., Werth S., Schiestel T., Caro J. Perovskite hollow-fiber membranes for the production of oxygen-enriched air. Angew Chem Int Ed 2005, 44:6906-6909.
3. Baumann S., Meulenberg W.A., Buchkremer H.P. Manufacturing strategies for asymmetric ceramic membranes for efficient separation of oxygen from air. J Eur Ceram Soc 2013, 33:1251-1261.
4. Kothanda Ramachandran D., Kaiser A., Glasscock J. Tailoring the porosity and shrinkage of extruded MgO support tubes for oxygen separation membranes by thermoplastic feedstock development. Materials Science and Technology Conference (MS&T'12) 2012.
5. Lipińska-Chwałek M., Pećanac G., Malzbender J. Creep behaviour of membrane and substrate materials for oxygen separation units. J Eur Ceram Soc 2013, 33:1841-1848.
6. Atkinson A., Bastid P., Liu Q. Mechanical properties of magnesia-spinel composites. J Am Ceram Soc 2007, 90:2489-2496.
7. http://www.keranova.se/Engelsk/Exceltabell_E.htm.
8. http://www.ceramics.nist.gov/srd/summary/ftgmgo.htm.
9. Kneer R., Toporov D., Forster M., Christ D., Broeckmann C., Pfaff E., et al. OXYCOAL-AC: towards an integrated coal-fired power plant process with ion transport membrane-based oxygen supply. Energy Environ Sci 2010, 3:198-207.
10. Kriegel R. Handbuch Technische Keramische Werkstoffe 2010, vol. 119:1. HvB-Verlag, Ellerau, Germany, [chapter 8.10.1.1].
11. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res 1992, 7:1564-1583.
12. Malzbender J., de With G. The use of the loading curve to assess soft coatings. Surf Coat Technol 2000, 127:265-272.
13. Malzbender J., de With G. Cracking and residual stress in hybrid coatings on float glass. Thin Solid Film 2000, 359:210-214.
14. Malzbender J., Steinbrech R.W. Fracture test of thin sheet electrolytes for solid oxide fuel cells. J Euro Ceram Soc 2007, 27:2597-2603.
15. Malzbender J., de With G. Mechanical properties of coated materials and multi-layered composites determined using bending methods. Surf Coat Technol 2004, 176:165-172.
16. Jadaan M.O., Shelleman L.D., Conway C.J., Mecholsky J.J., Tressler E.R. Prediction of the strength of ceramic tubular components. I, analysis. J Test Eval 1991, 19:181-191.
17. 3-δ. J Mater Sci 2010, 45:1227-1230.
18. Salem J.A., Powers L. Guidelines for the testing of plates. Ceram Eng Sci Proc 2003, 24(4):357-364.
19. Wachtman J.B., Cannon W.R., Matthewson M.J. Mechanical properties of ceramics 2009, Wiley, NY.
20. 3-δ. J Euro Ceram Soc 2011, 31:2997-3002.
21. 3 as anode material for solid oxide fuel cells. J. Power Sources 2012, 206:204-209.
22. Kaiser A., Foghmoes S., Malzbender J., Pećanac G., Esposito V., Glasscock J.A., et al. Sintering and characterization of asymmetric CGO bi-layers for oxygen membranes. 10th Pacific Rim conference on ceramic and glass technology 2013.
23. Lam D.C.C., Lange F.F., Evans A.G. Mechanical-properties of partially dense alumina produced from powder compacts. J Am Ceram Soc 1994, 77:2113-2117.
24. Ostrowski T., Ziegler A., Bordia R.K., Rödel J. Evolution of young's modulus, strength, and microstructure during liquid-phase sintering. J Am Ceram Soc 1998, 81:1852-1860.
25. Ohji T. Microstructural design and mechanical properties of porous silicon nitride ceramics. Mater Sci Eng A 2008, 498:5-11.
26. Lipińska-Chwałek M., Huang B., Pećanac G., Malzbender J. Sauerstoffpermeable keramische Membranen für kohlebefeuerte Kraftwerke Teilvorhaben: Thermochemische und thermomechanische Membran Charakterisierung: MEM-OXYCOAL; Teilprojekt IEK-2 2013, Technical University Library, Hanover.
27. Evans A.G., Gilling D., Davidge R.W. The temperature dependence of the strength of polycrystalline MgO. J Mater Sci 1970, 5:187-197.
28. Tietz F. Thermal expansion of SOFC materials. Ionics 1999, 5:129-138.
29. Shiratori Y., Tietz F., Buchkremer H.P., Stöver D. YSZ-MgO composite electrolyte with adjusted thermal expansion coefficient to other SOFC components. Solid State Ion 2003, 164:27-33.
30. Pećanac G., Foghmoes S., Lipińska-Chwałek M., Baumann S., Beck T., Malzbender J. Strength degradation and failure limits of dense and porous ceramic membrane materials. J Eur Ceram Soc 2013, 33:2689-2698.
31. Tancret F., Bouler J.M., Chamousset J., Minois L.M. Modelling the mechanical properties of microporous and macroporous biphasic calcium phosphate bioceramics. J Eur Ceram Soc 2006, 26:3647-3656.
32. Meille S., Lombardi M., Chevalier J., Montanaro L. Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behavior. J Euro Ceram Soc 2012, 32:3959-3967.