Stress analysis and fail-safe design of bilayered tubular supported ceramic membranes

Journal of Membrane Science

Volumn 453, Issue , 2014, Pages 253-262

  Kwok, K ^a   Frandsen, H L ^a   Sogaard M ^a   Hendriksen, P V ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Mechanical failure; Oxygen separation; Stress analysis; Supported membranes; Tubular membranes

Indexed keywords

CLOSED-FORM ANALYTICAL SOLUTIONS; MECHANICAL FAILURES; MECHANICAL RELIABILITY; MIXED IONIC AND ELECTRONIC CONDUCTORS; OXYGEN SEPARATION; SUPPORTED MEMBRANE; THERMAL EXPANSION COEFFICIENTS; TUBULAR MEMBRANES;

CERAMIC MEMBRANES; MATERIALS PROPERTIES; MEMBRANES; OXYGEN; STRESS ANALYSIS; STRESS CONCENTRATION;

FRACTURE;

OXYGEN;

ARTICLE; BILAYER MEMBRANE; CERAMICS; HIGH TEMPERATURE; LOW TEMPERATURE; MECHANICAL STRESS; OUTER MEMBRANE; OXYGEN TRANSPORT; PRIORITY JOURNAL; SHEAR STRESS; STEADY STATE; STOICHIOMETRY; TENSILE STRENGTH; VACUUM; YOUNG MODULUS;

EID: 84889024588     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2013.11.020     Document Type: Article

References (49)

1. 2 capture. Chem. Eng. Process. 2004, 43:1129-1158.
2. Stadler H., Beggel F., Habermehl M., Persigehl B., Kneer R., Modigell M., et al. Oxyfuel coal combustion by efficient integration of oxygen transport membranes. Int. J. Greenh. Gas Control 2011, 5:7-15.
3. Hendriksen P., Larsen P., Mogensen M., Poulsen F., Wiik K. Prospects and problems of dense oxygen permeable membranes. Catal. Today 2000, 56:283-295.
4. Bouwmeester H. Dense ceramic membranes for methane conversion. Catal. Today 2003, 82:141-150.
5. Hendriksen P., Carter J., Mogensen M. Dimensional instability of doped lanthanum chromites in an oxygen pressure gradient. Proceedings of the Fourth International Symposium on SOFC, Yokohama, 18-23 June 1995 1995, vol. 95-1:934-943. The Electrochemical Society.
6. Adler S.B. Chemical expansivity of electrochemical ceramics. J. Am. Ceram. Soc. 2001, 84:2117-2119.
7. Yasuda I., Hishinuma M. Mathematical analysis of stress distribution in acceptor-doped lanthanum chromites under an oxygen potential gradient. Proceedings of the Fourth International Symposium on SOFC, Yokohama, 18-23 June 1995 1995, vol. 95-1:924-933. The Electrochemical Society.
8. Atkinson A. Chemically-induced stresses in gadolinium-doped ceria solid oxide fuel cell electrolytes. Solid State Ion. 1997, 195:249-258.
9. 3 under oxygen potential gradient. J. Electrochem. Soc. 2000, 147:4071-4077.
10. 3 interconnector under solid oxide fuel cell operation. J. Electrochem. Soc. 2003, 150:A35-A45.
11. Krishnamurthy R., Sheldon B. Stresses due to oxygen potential gradients in non-stoichiometric oxides. Acta Mater. 2004, 52:1807-1822.
12. Swaminathan N., Qu J. Interactions between non-stoichiometric stresses and defect transport in a tubular electrolyte. Fuel Cells 2007, 7:453-462.
13. Atkinson A., Ramos T. Chemically-induced stresses in ceramic oxygen ion-conducting membranes. Solid State Ion. 2000, 129:259-269.
14. Blond E., Richet N. Thermomechanical modeling of ion-conducting membrane for oxygen separation. J. Eur. Ceram. Soc. 2008, 28:793-801.
15. Zolochevsky A., Grabovskiy A., Parkhomenko L., Lin Y. Coupling effects of oxygen surface exchange kinetics and membrane thickness on chemically induced stresses in perovskite-type membranes. Solid State Ion. 2012, 212:55-65.
16. Zolochevsky A., Parkhomenko L., Kuhhorn A. Analysis of oxygen exchange-limited transport and chemical stresses in perovskite-type hollow fibers. Mater. Chem. Phys. 2012, 135:594-603.
17. Evans A., Hutchinson J. The thermomechanical integrity of thin films and multilayers. Acta Metall. Mater. 1995, 43:2507-2530.
18. Hsueh C. Thermal stresses in elastic multilayer systems. Thin Solid Films 2002, 418:182-188.
19. Malzbender J. Mechanical and thermal stresses in multilayered materials. J. Appl. Phys. 2004, 95:1780-1782.
20. Malzbender J. Curvature and stresses for bi-layer functional ceramic materials. J. Eur. Ceram. Soc. 2010, 30:3407-3413.
21. Hsueh C., Fuller E. Analytical modeling of oxide thickness effects on residual stresses in thermal barrier coatings. Scr. Mater. 2000, 42:781-787.
22. Hsueh C., Becher P., Sun E. Analyses of thermal expansion behavior of intergranular two-phase composites. J. Mater. Sci. 2001, 36:255-261.
23. Ce0.9Gd0.1O1.95 -δ membranes I. Model study. J. Electrochem. Soc. 2011, 158:F61-F72.
24. Lamé G. Leçons sur la théorie mathématique de l'élasticité des corps solides 1852, Bachelier.
25. Timoshenko S., Goodier J.N. Theory of Elasticity 1951, McGraw-Hill Book Company.
26. Ba0.5Sr0.5Co0.8Fe0.2O3 -δ. J. Memb. Sci. 2000, 172:177-188.
27. Gavalas G.R., Liu S. Oxygen selective ceramic hollow fiber membranes. J. Memb. Sci. 2005, 246:103-108.
28. Vente J.F., Haije W.G., Rak Z.S. Performance of functional perovskite membranes for oxygen production. J. Memb. Sci. 2006, 276:178-184.
29. Ba0.5Sr0.5Co0.8Fe0.2O3 -δ membranes. J. Memb. Sci. 2011, 377:198-205.
30. Ba0.5Sr0.5Co0.8Fe0.2O3 -δ (bscf) oxygen transport membranes. J. Memb. Sci. 2013, 433:121-125.
31. Yang Z., Lin Y. A semi-empirical equation for oxygen nonstoichiometry of perovskite-type ceramics. Solid State Ion. 2002, 150:245-254.
32. Ba0.5Sr0.5Co0.8Fe0.2O3 -δ. Solid State Ion. 2010, 181:64-70.
33. Rice R.W. Mechanical Properties of Ceramics and Composites. Grain and Particle Effects 2000, CRC Press.
34. B. Huang, Thermo-mechanical properties of mixed ion-electron conducting membrane materials (Ph.D. thesis), RWTH Aachen University, 2010.
35. Ba0.5Sr0.5Co0.8Fe0.2O3 -d. J. Eur. Ceram. Soc. 2011, 31:2997-3002.
36. Kaiser A., Foghmoes S., Chatzichristodoulou C., Søgaard M., Glasscock J., Frandsen H., et al. Evaluation of thin film ceria membranes for syngas membrane reactors - preparation, characterization and testing. J. Memb. Sci. 2011, 378:51-60.
37. Mogensen M., Sammes N.M., Tompsett G.A. Physical chemical and electrochemical properties of pure and doped ceria. Solid State Ion. 2000, 129:63-94.
38. Lipinska-Chwalek M., Pecanac G., Malzbender J. Creep behaviour of membrane and substrate materials for oxygen separation units. J. Eur. Ceram. Soc. 2013, 33:1841-1848.
39. Du Y., Sammes N.M., Tompsett G.A., Zhang D., Swan J., Bowden M. Extruded tubular strontium- and magnesium-doped lanthanum gallate, gadolinium-doped ceria, and yttria-stabilized zirconia electrolytes: mechanical and thermal properties. J. Electrochem. Soc. 2003, 150:A74-A78.
40. Atkinson A., Selcuk A. Mechanical behaviour of ceramic oxygen ion-conducting membranes. Solid State Ion. 2000, 134:59-66.
41. Touloukian Y., Kirby R., Taylor R., Lee T. Thermal Expansion. Nonmetallic Solids 1977, IFI/Plenum.
42. Tilley R. Understanding Solids. The Science of Materials 2005, John Wiley and Sons.
43. Shiratori Y., Tietz F., Buchkremer H., Stover D. Ysz-mgo composite electrolyte with adjusted thermal expansion coefficient to other SOFC components. Solid State Ion. 2003, 164:27-33.
44. P.V. Hendriksen, J. Høgsberg, A. Kjeldsen, B. Sørensen, H. Pedersen, Failure modes of thin supported membranes, in: N. Bansal (Ed.), Advances in Solid Oxide Fuel Cells II: Ceramic Engineering and Science Proceedings, vol. 27, 2007.
45. Hutchinson J., Suo Z. Mixed mode cracking in layered materials. Adv. Appl. Mech. 1992, 29:63-191.
46. Nemat-Nasser S., Horii H. Compression-induced nonplanar crack extension with application to splitting, exfoliation, and rockburst. J. Geophys. Res. 1982, 87:6805-6821.
47. Ashby M., Hallam S. The failure of brittle solids containing small cracks under compressive stress states. Acta Metall. 1986, 34:497-510.
48. Ba0.5Sr0.5Co0.8Fe0.2O3 -d perovskite. J. Eur. Ceram. Soc. 2011, 31:401-408.
49. Ce0.9Gd0.1O2 for manufacturing solid oxide electrolytes. Mater. Sci. Eng. A 2009, 517:91-96.