Recent developments on biobased curing agents: A review of their preparation and use

ACS Sustainable Chemistry and Engineering

Volumn 2, Issue 10, 2014, Pages 2217-2236

  Ding, Cheng ^a   Matharu, Avtar S ^a  

^a UNIVERSITY OF YORK   (United Kingdom)

Author keywords

Biobased; Curing agents; Epoxy resins; Renewable materials

Indexed keywords

ADHESIVES; AMINES; CURING; PACKAGING MATERIALS; SUPPLY CHAINS;

BIO-BASED; BIOBASED EPOXY; CURING AGENTS; ELECTRONIC DEVICE; HIGH PERFORMANCE COMPOSITES; MODEL COMPOUND; RENEWABLE MATERIALS; SUSTAINABLE PRACTICES;

EPOXY RESINS;

EID: 84907835099     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/sc500478f     Document Type: Review

References (156)

1. Anastas, P. and Warner, J. Green Chemistry: Theory and Practice; Oxford University Press: New York, 2000.
2. Epoxy resins, PERP program. http://www.chemsystems.com/reports/search/docs/abstracts/0405S11
3. Ashcroft, W. R. Curing Agents for Epoxy Resins. In Chemistry and Technology of Epoxy Resins, first ed.; Ellis, B., Ed.; Springer: Glasgow, 1993; pp 37-71.
4. Sun, L. Thermal Rheological Analysis of Cure Process of Epoxy Prepreg. Ph.D. Thesis, Louisiana State University, 2001.
5. Mika, T. F. and Bauer, R. S., Curing agents and modifiers. In Epoxy Resins Chemistry and Technology, second ed.; May, C., Ed.; CRC Press: New York, 1988; pp 465-550.
6. Li, Y.; Xiao, F.; Wong, C. P. Novel, environmentally friendly crosslinking system of an epoxy using an amino acid: Tryptophan-cured diglycidyl ether of bisphenol A epoxy J. Polym. Sci., Part A: Polym. Chem. 2007, 45 (2) 181-190
7. Epoxy Resins and Curing Agents: Toxicology, Health, Safety and Environmental Aspects. Plastics Europe Epoxy Resins Committee: Brussels, Belgium, 2006; pp 1-28.
8. Cyclic Acid Anhydrides: Health-Based Recommended Occupational Exposure Limit; The Health Council of the Netherlands: The Hague The Netherlands, 2010.
9. Auvergne, R.; Caillol, S.; David, G.; Boutevin, B.; Pascault, J.-P. Biobased thermosetting epoxy: Present and future Chem. Rev. 2013, 114 (2) 1082-1115
10. Mahendran, A.; Wuzella, G.; Kandelbauer, A.; Aust, N. Thermal cure kinetics of epoxidized linseed oil with anhydride hardener J. Therm. Anal. Calorim. 2012, 107 (3) 989-998
11. Metzger, J. O. Fats and oils as renewable feedstock for chemistry Eur. J. Lipid Sci. Technol. 2009, 111 (9) 865-876
12. Gerbase, A.; Petzhold, C.; Costa, A. Dynamic mechanical and thermal behavior of epoxy resins based on soybean oil J. Am. Oil Chem. Soc. 2002, 79 (8) 797-802
13. Puig, G. L. I. Biobased Thermosets from Vegetable Oils. Synthesis, Characterization, and Properties. Ph.D. Thesis, Rovira i Virgili University, 2006.
14. Warth, H.; Mülhaupt, R.; Hoffmann, B.; Lawson, S. Polyester networks based upon epoxidized and maleinated natural oils Angew. Makromol. Chem. 1997, 249 (1) 79-92
15. Root, F. B. Improvement of Drying Oils. U.S. Patent US2374381, 1945.
16. Tran, P.; Seybold, K.; Graiver, D.; Narayan, R. Free radical meleation of soybean oil via a single-step process J. Am. Oil Chem. Soc. 2005, 82 (3) 189-194
17. Tran, P.; Graiver, D.; Narayan, R. Biocomposites synthesized from chemically modified soy oil and biofibers J. Appl. Polym. Sci. 2006, 102 (1) 69-75
18. Mahendran, A. R.; Aust, N.; Wuzella, G.; Kandelbauer, A. Synthesis and characterization of a bio-based resin from linseed oil Macromol.. Symp. 2012, 311 (1) 18-27
19. Lu, J.; Khot, S.; Wool, R. P. New sheet molding compound resins from soybean oil. I. Synthesis and characterization Polymer 2005, 46 (1) 71-80
20. Can, E.; Küsefoʇlu, S.; Wool, R. P. Rigid, thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleates J. Appl. Polym. Sci. 2001, 81 (1) 69-77
21. Biermann, U.; Butte, W.; Eren, T.; Haase, D.; Metzger, J. O. Regio- and stereoselective Diels-Alder additions of maleic anhydride to conjugated triene fatty acid methyl esters Eur. J. Org. Chem. 2007, 2007 (23) 3859-3862
22. Hilditch, T. P.; Mendelowitz, A. The component fatty acids and glycerides of tung oil J. Sci. Food Agric. 1951, 2 (12) 548-556
23. Xu, W. B.; Bao, S. P.; He, P. S. Intercalation and exfoliation behavior of epoxy resin/curing agent/montmorillonite nanocomposite J. Appl. Polym. Sci. 2002, 84 (4) 842-849
24. Lowe, A. B. Thiol-ene "click" reactions and recent applications in polymer and materials synthesis Polym. Chem. 2010, 1 (1) 17-36
25. Lligadas, G.; Ronda, J. C.; Galià, M.; Cádiz, V. Monomers and polymers from plant oils via click chemistry reactions J. Polym. Sci., Part A: Polym. Chem. 2013, 51 (10) 2111-2124
26. Jaillet, F.; Desroches, M.; Auvergne, R.; Boutevin, B.; Caillol, S. New biobased carboxylic acid hardeners for epoxy resins Eur. J. Lipid Sci. Technol. 2013, 115 (6) 698-708
27. Desroches, M.; Caillol, S.; Lapinte, V.; Auvergne, R. m.; Boutevin, B. Synthesis of biobased polyols by thiol-ene coupling from vegetable oils Macromolecules 2011, 44 (8) 2489-2500
28. Stemmelen, M.; Pessel, F.; Lapinte, V.; Caillol, S.; Habas, J. P.; Robin, J. J. A fully biobased epoxy resin from vegetable oils: From the synthesis of the precursors by thiol-ene reaction to the study of the final material J. Polym. Sci., Part A: Polym. Chem. 2011, 49 (11) 2434-2444
29. Shibata, M.; Teramoto, N.; Yoshihara, S.; Itakura, Y. Preparation and properties of biocomposites composed of sorbitol-based epoxy resin, tung oil-pyrogallol resin, and wood flour J. Appl. Polym. Sci. 2013, 129 (1) 282-288
30. Desroches, M.; Auvergne, R.; Boutevin, B.; Caillol, S. Synthesis of bio-based building blocks from vegetable oils: A platform chemicals approach Ol., Corps Gras, Lipides 2013, 20 (1) 16-22
31. Zhao, H.-P.; Zhang, J.-F.; Susan Sun, X.; Hua, D. H. Syntheses and properties of cross-linked polymers from functionalized triglycerides J. Appl. Polym. Sci. 2008, 110 (2) 647-656
32. Lligadas, G.; Ronda, J. C.; Galià, M.; Cádiz, V. Plant oils as platform chemicals for polyurethane synthesis: current state-of-the-art Biomacromolecules 2010, 11 (11) 2825-2835
33. Desroches, M.; Escouvois, M.; Auvergne, R.; Caillol, S.; Boutevin, B. From vegetable oils to polyurethanes: synthetic routes to polyols and main industrial products Polym. Rev. 2012, 52 (1) 38-79
34. Czub, P. Synthesis of high-molecular-weight epoxy resins from modified natural oils and Bisphenol A or Bisphenol A-based epoxy resins Polym. Adv. Technol. 2009, 20 (3) 194-208
35. Ahn, B. K.; Kraft, S.; Wang, D.; Sun, X. S. Thermally stable, transparent, pressure-sensitive adhesives from epoxidized and dihydroxyl soybean oil Biomacromolecules 2011, 12 (5) 1839-1843
36. Liu, Z.; Xu, Y.; Cao, L.; Bao, C.; Sun, H.; Wang, L.; Dai, K.; Zhu, L. Phosphoester cross-linked vegetable oil to construct a biodegradable and biocompatible elastomer Soft Matter 2012, 8 (21) 5888-5895
37. Top Value Added Chemicals from Biomass. Volume I: Results of Screening for Potential Candidates from Sugars and Synthesis Gas. U.S. Department of Energy: Washington, DC, 2013.
38. Xu, Y.; Hanna, M. A.; Isom, L. Green chemicals from renewable agricultural biomass: A mini review Open Agric. J. 2008, 2, 54-61
39. Corma, A.; Iborra, S.; Velty, A. Chemical routes for the transformation of biomass into chemicals Chem. Rev. 2007, 107 (6) 2411-2502
40. Jong, E. d.; Higson, A.; Walsh, P.; Wellisch, M. Bio-Based Chemicals: Value Added Products from Biorefineries; IEA Bioenergy: 2012; pp 1-33.
41. Lichtenthaler, F. W. Carbohydrates as Organic Raw Materials. In Ullmanns Encyclopedia of Industrial Chemistry; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2000.
42. Vasishtha, A. K.; Trivedi, R. K.; Das, G. Sebacic acid and 2-octanol from castor oil J. Am. Oil Chem. Soc. 1990, 67 (5) 333-337
43. Schörken, U.; Kempers, P. Lipid biotechnology: Industrially relevant production processes Eur. J. Lipid Sci. Technol. 2009, 111 (7) 627-645
44. Kroha, K. Industrial biotechnology provides opportunities for commercial production of new long-chain dibasic acids Informatics 2004, 15, 568-571
45. Ahn, B.-J. K.; Kraft, S.; Sun, X. S. Solvent-free acid-catalyzed ring-opening of epoxidized oleochemicals using stearates/stearic acid, and its applications J. Agric. Food. Chem. 2012, 60 (9) 2179-2189
46. Shogren, R.; Petrovic, Z.; Liu, Z.; Erhan, S. Biodegradation behavior of some vegetable oil-based polymers J. Polym. Environ. 2004, 12 (3) 173-178
47. Shechter, L.; Wynstra, J. Glycidyl ether reactions with alcohols, phenols, carboxylic acids, and acid anhydrides Ind. Eng. Chem. 1956, 48 (1) 86-93
48. Shogren, R. L. Preparation and characterization of a biodegradable mulch: Paper coated with polymerized vegetable oils J. Appl. Polym. Sci. 1999, 73 (11) 2159-2167
49. Lee, C. S.; Lee, S. C. Preparation of polyester polyol from epoxidized palm olein Chin. J. Chem. 2011, 29 (4) 840-846
50. Caillol, S.; Desroches, M.; Boutevin, G.; Loubat, C.; Auvergne, R.; Boutevin, B. Synthesis of new polyester polyols from epoxidized vegetable oils and biobased acids Eur. J. Lipid Sci. Technol. 2012, 114 (12) 1447-1459
51. Pire, M.; Norvez, S.; Iliopoulos, I.; Le Rossignol, B.; Leibler, L. Epoxidized natural rubber/dicarboxylic acid self-vulcanized blends Polymer 2010, 51 (25) 5903-5909
52. Ambrogi, V.; Giamberini, M.; Cerruti, P.; Pucci, P.; Menna, N.; Mascolo, R.; Carfagna, C. Liquid crystalline elastomers based on diglycidyl terminated rigid monomers and aliphatic acids. Part 1. Synthesis and characterization Polymer 2005, 46 (7) 2105-2121
53. Supanchaiyamat, N.; Shuttleworth, P. S.; Hunt, A. J.; Clark, J. H.; Matharu, A. S. Thermosetting resin based on epoxidised linseed oil and bio-derived crosslinker Green. Chem. 2012, 14 (6) 1759-1765
54. Montarnal, D.; Tournilhac, F.; Hidalgo, M.; Leibler, L. Epoxy-based networks combining chemical and supramolecular hydrogen-bonding crosslinks J. Polym. Sci., Part A: Polym. Chem. 2010, 48 (5) 1133-1141
55. Montarnal, D.; Capelot, M.; Tournilhac, F.; Leibler, L. Silica-like malleable materials from permanent organic networks Science 2011, 334 (6058) 965-968
56. Capelot, M.; Montarnal, D.; Tournilhac, F.; Leibler, L. Metal-catalyzed transesterification for healing and assembling of thermosets J. Am. Chem. Soc. 2012, 134 (18) 7664-7667
57. Capelot, M.; Unterlass, M. M.; Tournilhac, F.; Leibler, L. Catalytic control of the vitrimer glass transition ACS Macro Lett. 2012, 1 (7) 789-792
58. Pei, Z. Q.; Yang, Y.; Chen, Q.; Terentjev, E. M.; Wei, Y.; Ji, Y. Mouldable liquid-crystalline elastomer actuators with exchangeable covalent bonds Nat. Mater. 2014, 13 (1) 36-41
59. Carter, D. T.; Stansfield, N.; Mantle, R. J.; France, C. M.; Smith, P. A. An investigation of epoxidised linseed oil as an alternative to PVC in flooring applications Ind. Crops Prod. 2008, 28 (3) 309-319
60. Hu, Y. L.; Zhao, X. G.; Lu, M. Efficient and convenient synthesis of symmetrical carboxylic anhydrides from carboxylic acids with sulfated zirconia by phase transfer catalysis Bull. Chem. Soc. Ethiop. 2011, 25 (2) 255-262
61. Yedur, S. K.; Dulebohn, J.; Werpy, T.; Berglund, K. A. Synthesis and testing of catalysts for the production of maleic anhydride from a fermentation feedstock Ind. Eng. Chem. Res. 1996, 35 (3) 663-671
62. 3 catalysts ChemSusChem 2012, 5 (10) 1984-1990
63. Du, Z. T.; Ma, J. P.; Wang, F.; Liu, J. X.; Xu, J. Oxidation of 5-hydroxymethylfurfural to maleic anhydride with molecular oxygen Green. Chem. 2011, 13 (3) 554-557
64. Dubois, J.-L. Manufacture of Maleic Anhydride from Renewable Materials, Maleic Anhydride Obtained, and Uses Thereof. U.S. Patent US20120015411A1, 2012.
65. Mahmoud, E.; Watson, D. A.; Lobo, R. F. Renewable production of phthalic anhydride from biomass-derived furan and maleic anhydride Green. Chem. 2014, 16 (1) 167-175
66. Leuchtenberger, W.; Huthmacher, K.; Drauz, K. Biotechnological production of amino acids and derivatives: current status and prospects Appl. Microbiol. Biotechnol. 2005, 69 (1) 1-8
67. Li, Y.; Xiao, F.; Moon, K.-S.; Wong, C. P. Novel curing agent for lead-free electronics: Amino acid J. Polym. Sci., Part A: Polym. Chem. 2006, 44 (2) 1020-1027
68. Kahar, P.; Iwata, T.; Hiraki, J. U. N.; Park, E. Y.; Okabe, M. Enhancement of epsilon-polylysine production by Streptomyces albulus strain 410 using pH control J. Biosci. Bioeng. 2001, 91 (2) 190-194
69. Kahar, P.; Kobayashi, K.; Iwata, T.; Hiraki, J.; Kojima, M.; Okabe, M. Production of ε-polylysine in an airlift bioreactor (ABR) J. Biosci. Bioeng. 2002, 93 (3) 274-280
70. Scholl, M.; Nguyen, T. Q.; Bruchmann, B.; Klok, H.-A. The thermal polymerization of amino acids revisited; synthesis and structural characterization of hyperbranched polymers from L-lysine J. Polym. Sci., Part A: Polym. Chem. 2007, 45 (23) 5494-5508
71. Scholl, M.; Nguyen, T. Q.; Bruchmann, B.; Klok, H.-A. Controlling polymer architecture in the thermal hyperbranched polymerization of l-Lysine Macromolecules 2007, 40 (16) 5726-5734
72. Takada, Y.; Shinbo, K.; Someya, Y.; Shibata, M. Preparation and properties of bio-based epoxy montomorillonite nanocomposites derived from polyglycerol polyglycidyl ether and ε-polylysine J. Appl. Polym. Sci. 2009, 113 (1) 479-484
73. Kind, S.; Wittmann, C. Bio-based production of the platform chemical 1,5-diaminopentane Appl. Microbiol. Biotechnol. 2011, 91 (5) 1287-1296
74. Van Es, D. S. Rigid biobased building blocks J. Renew. Mater. 2013, 1 (1) 61-72
75. Thiyagarajan, S.; Gootjes, L.; Vogelzang, W.; Haveren, J. v.; Lutz, M.; Es, D. S. v. Renewable rigid diamines: efficient, stereospecific synthesis of high purity isohexide diamines ChemSusChem 2011, 4 (12) 1823-1829
76. Hayes, R.; Brandenburg, C. Bis(2-hydroxyethyl isosorbide), Preparation, Polymers, and Use. U.S. Patent US6608167 B1, 2003.
77. Gillet, J. P. Novel Functional Compounds with an Isosorbide Core or Isosorbide Isomer, Fabrication Process, and Applications of These Compounds. Patent WO 2008145921 A3, 2008.
78. Yin, Y. Decyldiamine Laurate and Its Prepn Process and Application. Patent CN101088983, 2007.
79. Wang, Z.; Zhang, X.; Wang, R.; Kang, H.; Qiao, B.; Ma, J.; Zhang, L.; Wang, H. Synthesis and characterization of novel soybean-oil-based elastomers with favorable processability and tunable properties Macromolecules 2012, 45 (22) 9010-9019
80. Harvey, M. T.; Caplan, S. Cashew nut shell liquid Ind. Eng. Chem. 1940, 32 (10) 1306-1310
81. Wasserman, D.; Dawson, C. R. Cashew nut shell liquid Ind. Eng. Chem. 1945, 37 (4) 396-399
82. Tyman, J. H. P. Non-isoprenoid long chain phenols Chem. Soc. Rev. 1979, 8 (4) 499-537
83. Lubi, M. C.; Thachil, E. T. Cashew nut shell liquid (CNSL)-A versatile monomer for polymer synthesis Des. Monomers. Polym. 2000, 3 (2) 123-153
84. Nayak, P. L. Natural oil-based polymers: Opportunities and challenges J. Macromol. Sci., Polym. Rev. 2000, 40 (1) 1-21
85. Dai, Z. S.; Constantinescu, A.; Dalal, A.; Ford, C. Phenalkamine Multipurpose Epoxy Resin Curing Agents; Cardolite Corporation: Newark, NJ, 1994.
86. Phenalkamine Curing Agents. Cardolite Corporation. http://www.cardolite.com/?q=phenalkamine (accessed July 7, 2014).
87. Bueno, R. C.; Ferreira, A.; Moon, R. M.; Sato, S.; Shah, S. C. Phenalkamine and Salted Amine Blends as Curing Agents for Epoxy Resins. U.S. Patent US20100286345 A1, 2009.
88. Cheng, C. W. F.; Bender, D.; Wang, H. T. Phenalkamine Curing Agents and Epoxy Resin Compositions Containing the Same. U.S. Patent US6262148 B1, 2001.
89. Vijayalakshmi, P.; Rao, T. C.; Kale, V.; Balakrishna, R. S.; Subbarao, R. Reactive polyamides from cycloaliphatic C21 dicarboxylic acid and their evaluation as epoxy curing agents Polymer 1992, 33 (15) 3252-3256
90. Fenouillot, F.; Rousseau, A.; Colomines, G.; Saint-Loup, R.; Pascault, J. P. Polymers from renewable 1,4:3,6-dianhydrohexitols (isosorbide, isomannide and isoidide): A review Prog. Polym. Sci. 2010, 35 (5) 578-622
91. Fomina, E. V. Synthesis and properties of new polyfunctional curing agents for epoxy resins based on dimerized fatty acid Polym. Sci., Ser. D 2010, 3 (2) 87-91
92. Phenalkamide Curing Agents. Cardolite Corporation. http://www.cardolite.com/?q=phenalkamide (accessed July 23, 2014).
93. Campaner, P.; DAmico, D.; Longo, L.; Stifani, C.; Tarzia, A. Cardanol-based novolac resins as curing agents of epoxy resins J. Appl. Polym. Sci. 2009, 114 (6) 3585-3591
94. Quideau, S.; Deffieux, D.; Douat-Casassus, C.; Pouységu, L. Plant polyphenols: Chemical properties, biological activities, and synthesis Angew. Chem., Int. Ed. 2011, 50 (3) 586-621
95. Schieber, A.; Stintzing, F. C.; Carle, R. By-products of plant food processing as a source of functional compounds - Recent developments Trends Food Sci. Technol. 2001, 12 (11) 401-413
96. Pizzi, A., Tannins: Major Sources, Properties and Applications. In Monomers, Polymers and Composites from Renewable Resources; Belgacem, M. N.; Gandini, A., Eds.; Elsevier: Amsterdam, 2008; Chapter 8, pp 179-199.
97. Shibata, M.; Nakai, K. Preparation and properties of biocomposites composed of bio-based epoxy resin, tannic acid, and microfibrillated cellulose J. Polym. Sci., Part B: Polym. Phys. 2010, 48 (4) 425-433
98. Shibata, M.; Teramoto, N.; Makino, K. Preparation and properties of biocomposites composed of epoxidized soybean oil, tannic acid, and microfibrillated cellulose J. Appl. Polym. Sci. 2011, 120 (1) 273-278
99. Shimasaki, T.; Yoshihara, S.; Shibata, M. Preparation and properties of biocomposites composed of sorbitol-based epoxy resin, pyrogallol-vanillin calixarene, and wood flour Polym. Compos. 2012, 33 (10) 1840-1847
100. Shibata, M.; Yoshihara, S.; Yashiro, M.; Ohno, Y. Thermal and mechanical properties of sorbitol-based epoxy resin cured with quercetin and the biocomposites with wood flour J. Appl. Polym. Sci. 2013, 128 (5) 2753-2758
101. Harwood, M.; Danielewska-Nikiel, B.; Borzelleca, J. F.; Flamm, G. W.; Williams, G. M.; Lines, T. C. A critical review of the data related to the safety of quercetin and lack of evidence of in vivo toxicity, including lack of genotoxic/carcinogenic properties Food Chem. Toxicol. 2007, 45 (11) 2179-2205
102. Gandini, A. Polymers from renewable resources: a challenge for the future of macromolecular materials Macromolecules 2008, 41 (24) 9491-9504
103. Silvestre, A. J. D.; Gandini, A. Rosin: Major Sources, Properties and Applications. In Monomers, Polymers and Composites from Renewable Resources; Belgacem, M. N.; Gandini, A., Eds.; Elsevier: Amsterdam, 2008; Chapter 4, pp 67-88.
104. Maiti, S.; Ray, S. S.; Kundu, A. K. Rosin: A renewable resource for polymers and polymer chemicals Prog. Polym. Sci. 1989, 14 (3) 297-338
105. Wang, H.; Liu, B.; Liu, X.; Zhang, J.; Xian, M. Synthesis of biobased epoxy and curing agents using rosin and the study of cure reactions Green. Chem. 2008, 10 (11) 1190-1196
106. Liu, X.; Xin, W.; Zhang, J. Rosin-based acid anhydrides as alternatives to petrochemical curing agents Green. Chem. 2009, 11 (7) 1018-1025
107. Liu, X.; Zhang, J. High-performance biobased epoxy derived from rosin Polym. Int. 2010, 59 (5) 607-609
108. Wang, H.; Liu, X.; Liu, B.; Zhang, J.; Xian, M. Synthesis of rosin-based flexible anhydride-type curing agents and properties of the cured epoxy Polym. Int. 2009, 58 (12) 1435-1441
109. Liu, X.; Xin, W.; Zhang, J. Rosin-derived imide-diacids as epoxy curing agents for enhanced performance Bioresour. Technol. 2010, 101 (7) 2520-2524
110. Atta, A. M.; Mansour, R.; Abdou, M. I.; Sayed, A. M. Epoxy resins from rosin acids: synthesis and characterization Polym. Adv. Technol. 2004, 15 (9) 514-522
111. Atta, A.; Mansour, R.; Abdou, M.; Ei Sayed, A. Synthesis and characterization of tetra-functional epoxy resins from rosin J. Polym. Res. 2005, 12 (2) 127-138
112. Mi, Z.; Nie, X. A.; Wang, Y. G.; Chang, X.; Liu, G. F. Study on synthesis and performance of rosin derived polyamide as epoxy curing agent J. For. Prod. Ind. 2013, 2 (2) 5-11
113. Wang, H.; Wang, H.; Zhou, G. Synthesis of rosin-based imidoamine-type curing agents and curing behavior with epoxy resin Polym. Int. 2011, 60 (4) 557-563
114. Wang, J. F.; Yu, J.; Liu, Y. P.; Cheng, Y.; Wang, C. P.; Tang, C. B.; Chu, F. X. Synthesis and characterization of a novel rosin-based monomer: Free-radical polymerization and epoxy curing Green. Mater. 2012, 1 (2) 105-113
115. Mustata, F.; Bicu, I. Lactic ester of maleoabietic acid as crosslinking agent for epoxy resins Mater. Plast 2009, 46 (3) 249-254
116. Mustata, F. R.; Tudorachi, N. Epoxy resins cross-linked with rosin adduct derivatives. Cross-linking and thermal behaviors Ind. Eng. Chem. Res. 2010, 49 (24) 12414-12422
117. Liu, X. Q.; Huang, W.; Jiang, Y. H.; Zhu, J.; Zhang, C. Z. Preparation of a bio-based epoxy with comparable properties to those of petroleum-based counterparts eXPRESS Polym. Lett. 2012, 6 (4) 293-298
118. Silvestre, A. J. D.; Gandini, A. Terpenes: Major Sources, Properties and Applications. In Monomers, Polymers and Composites from Renewable Resources; Belgacem, M. N.; Gandini, A., Eds.; Elsevier: Amsterdam, 2008; Chapter 2, pp 17-38.
119. Milks, J. E.; Lancaster, J. E. Reaction products of alloocimene and maleic anhydride J. Org. Chem. 1965, 30 (3) 888-891
120. Tsutomu, T.; Ken-ichi, H.; Naozumi, T.; Mitsuhiro, S. Biocomposites composed of epoxidized soybean oil cured with terpene-based acid anhydride and cellulose fibers J. Appl. Polym. Sci. 2008, 108 (3) 1596-1602
121. Chang, R.; Qin, J.; Gao, J. Fully biobased epoxy from isosorbide diglycidyl ether cured by biobased curing agents with enhanced properties J. Polym. Res. 2014, 21 (7) 1-7
122. Bardasz, E. A.; Ohio, M. Terpinene-maleic Anhydride Adduct Derivatives as Corrosion Inhibitors. U.S. Patent US5066461, 1991.
123. Mckeever, C. H.; Washburne, R. N. Process for the Preparation of Menthane Diamine. U.S. Patent US2955138 A, 1960.
124. Bader, A. R. Preparation of Terpene Diphenolic Compounds. U.S. Patent US2811564 A, 1957.
125. Mogi, N.; Yasuda, H. Epoxy Resin Composition. U.S. Patent US5416138 A, 1995.
126. Kimura, H.; Murata, Y.; Matsumoto, A.; Hasegawa, K.; Ohtsuka, K.; Fukuda, A. New thermosetting resin from terpenediphenol-based benzoxazine and epoxy resin J. Appl. Polym. Sci. 1999, 74 (9) 2266-2273
127. Gellerstedt, G.; Henriksson, G. Lignins: Major Sources, Structure and Properties. In Monomers, Polymers and Composites from Renewable Resources; Belgacem, M. N.; Gandini, A., Eds.; Elsevier: Amsterdam, 2008; Chapter 9, pp 201-224.
128. Chung, H.; Washburn, N. R. Chemistry of lignin-based materials Green Mater. 2012, 1 (3) 137-160
129. Koike, T. Progress in development of epoxy resin systems based on wood biomass in Japan Polym. Eng. Sci. 2012, 52 (4) 701-717
130. Tomita, B.; Kurozumi, K.; Takemura, A.; Hosoya, S. Ozonized Lignin-Epoxy Resins. In Lignin; Glasser, W. G.; Sarkanen, S., Eds; ACS Symposium Series 397; American Chemical Society: Washington, DC, 1989; pp 496-505.
131. Lee, H. J.; Tomita, B.; Hosoya, S. Development of ozonized kraft lignin/epoxy resin adhesives Mokuzai Kogyo 1991, 46 (9) 412-417
132. Nonaka, Y.; Tomita, B.; Hatano, Y. Synthesis of lignin /epoxy resins in aqueous systems and their properties Holzforschung 1997, 51 (2) 183-187
133. Qin, J.; Woloctt, M.; Zhang, J. Use of polycarboxylic acid derived from partially depolymerized lignin as a curing agent for epoxy application ACS Sustainable Chem. Eng. 2013, 2 (2) 188-193
134. Hirose, S.; Hatakeyama, T.; Hatakeyama, H. Synthesis and thermal properties of epoxy resins from ester-carboxylic acid derivative of alcoholysis lignin Macromol.. Symp. 2003, 197 (1) 157-170
135. Hirose, S.; Hatakeyama, T.; Hatakeyama, H. Glass transition and thermal decomposition of epoxy resins from the carboxylic acid system consisting of ester-carboxylic acid derivatives of alcoholysis lignin and ethylene glycol with various dicarboxylic acids Thermochim. Acta 2005, 431 (1-2) 76-80
136. Ismail, T. N. M. T.; Hassan, H. A.; Hirose, S.; Taguchi, Y.; Hatakeyama, T.; Hatakeyama, H. Synthesis and thermal properties of ester-type crosslinked epoxy resins derived from lignosulfonate and glycerol Polym. Int. 2010, 59 (2) 181-186
137. Hirose, S. New epoxy resins from oil palm components J. Oil. Palm. Res. 2011, 23, 1110-1114
138. Yoshiaki, O.; Hiroyuki, K. Biomass-derived epoxy resin composition. U.S. Patent US20110024168 A1, 2011.
139. Kiuchi, H.; Kai, W.; Inoue, Y. Preparation and characterization of poly(ethylene glycol) crosslinked chitosan films J. Appl. Polym. Sci. 2008, 107 (6) 3823-3830
140. Chen, M.-C.; Tsai, H.-W.; Chang, Y.; Lai, W.-Y.; Mi, F.-L.; Liu, C.-T.; Wong, H.-S.; Sung, H.-W. Rapidly self-expandable polymeric stents with a shape-memory property Biomacromolecules 2007, 8 (9) 2774-2780
141. Cestari, A. R.; Vieira, E. F. S.; Alves, F. J.; Silva, E. C. S.; Andrade, M. A. S., Jr. A novel and efficient epoxy/chitosan cement slurry for use in severe acidic environments of oil wells-structural characterization and kinetic modeling J. Hazard. Mater. 2012, 213-214 (0) 109-116
142. Illy, N.; Benyahya, S.; Durand, N.; Auvergne, R.; Caillol, S.; David, G.; Boutevin, B. The influence of formulation and processing parameters on the thermal properties of a chitosan-epoxy prepolymer system Polym. Int. 2013, 63 (3) 420-426
143. Liu, X.; Wang, Y.; Cao, Y.; Yadama, V.; Xian, M.; Zhang, J. Study of dextrin-derived curing agent for waterborne epoxy adhesive Carbohydr. Polym. 2011, 83 (3) 1180-1184
144. Ahn, B. K.; Sung, J.; Li, Y.; Kim, N.; Ikenberry, M.; Hohn, K.; Mohanty, N.; Nguyen, P.; Sreeprasad, T. S.; Kraft, S.; Berry, V.; Sun, X. S. Synthesis and characterization of amphiphilic reduced graphene oxide with epoxidized methyl oleate Adv. Mater. 2012, 24 (16) 2123-2129
145. Puig, J.; Hoppe, C. E.; Fasce, L. A.; Pérez, C. J.; Piñeiro-Redondo, Y.; Bañobre-López, M.; López-Quintela, M. A.; Rivas, J.; Williams, R. J. J. Superparamagnetic nanocomposites based on the dispersion of oleic acid-stabilized magnetite nanoparticles in a diglycidylether of bisphenol A-based epoxy matrix: magnetic hyperthermia and shape memory J. Phys. Chem. C 2012, 116 (24) 13421-13428
146. Dammer, L.; Carus, M.; Raschka, A.; Scholz, L. Market Developments of and Opportunities for Biobased Products and Chemicals; Nova-Institut Germany: Hürth, Germany, 2013.
147. Gaustavsson, J.; Cederberg, C.; Sonesson, U.; Otterdijk, R. v.; Meybeck, A. Global Food Losses and Food Waste: Extent, Causes and Prevention; FAO: Rome, 2011.
148. Luque, R.; Clark, J. Valorisation of food residues: Waste to wealth using green chemical technologies Sustainable Chem. Processes 2013, 1 (1) 10
149. Lin, C. S. K.; Pfaltzgraff, L. A.; Herrero-Davila, L.; Mubofu, E. B.; Abderrahim, S.; Clark, J. H.; Koutinas, A. A.; Kopsahelis, N.; Stamatelatou, K.; Dickson, F.; Thankappan, S.; Mohamed, Z.; Brocklesby, R.; Luque, R. Food waste as a valuable resource for the production of chemicals, materials and fuels. Current situation and global perspective Energy Environ. Sci. 2013, 6 (2) 426-464
150. Clark, J. H.; Pfaltzgraff, L. A.; Budarin, V. L.; Hunt, A. J.; Gronnow, M.; Matharu, A. S.; Macquarrie, D. J.; Sherwood, J. R. From waste to wealth using green chemistry Pure Appl. Chem. 2013, 85, 1625
151. North, M. Sustainable Polymers. Green Chemistry Centre of Excellence; The University of York: York, U.K., 2014.
152. Zakzeski, J.; Bruijnincx, P. C. A.; Jongerius, A. L.; Weckhuysen, B. M. The catalytic valorization of lignin for the production of renewable chemicals Chem. Rev. 2010, 110 (6) 3552-3599
153. ASTM D6866-12. Standard Test Methods for Determining the Biobased Content of Solid, Liquid, And Gaseous Samples Using Radiocarbon Analysis. ASTM International: West Conshohocken, PA, 2012.
154. Dodson, J. R.; Hunt, A. J.; Parker, H. L.; Yang, Y.; Clark, J. H. Elemental sustainability: Towards the total recovery of scarce metals Chem. Eng. Process. 2012, 51 (0) 69-78
155. Report on Critical Raw Materials for the EU; European Commission: Brussels, Belgium, 2014.
156. Blank, W. J.; He, Z. A.; Picci, M. Catalysis of the Epoxy-Carboxyl Reaction. In International Waterborne, High-Solids and Powder Coatings Symposium, New Orleans, LA, USA, 2001.