Rosin: Major sources, properties and applications

Monomers, Polymers and Composites from Renewable Resources

Volumn , Issue , 2008, Pages 67-88

  Silvestre, Armando J D ^a   Gandini, Alessandro ^b  

^a UNIVERSITY OF AVEIRO   (Portugal)

^b UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 78149274625     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-045316-3.00004-1     Document Type: Chapter

References (132)

1. Zinkel D.E., Russel J. Naval Stores. Production, Chemistry, Utilization 1989, Pulp Chemical Association, New York.
2. Maiti S., Ray S.S., Kundu A.K. Rosin - A renewable resource for polymers and polymer chemicals. Prog. Polym. Sci. 1989, 14(3):297-338.
3. Stauffer D.F. Production, markets and economics. Naval Stores. Production, Chemistry, Utilization 1989, 39-82. Pulp Chemical Association, New York. D.F. Zinkel, J. Russel (Eds.).
4. Coppen J.J.W., Hone G.A. Gum Naval Stores: Turpentine and Rosin from Pine Resin 1995, FAO, Rome.
5. Soltes J., Zinkel D.F. Chemistry of rosin. Naval Stores. Production, Chemistry, Utilization 1989, 261-345. Pulp Chemical Association, New York. D.F. Zinkel, J. Russel (Eds.).
6. Stump J.H. Quality control (tall oil, rosin, and fatty acids). Naval Stores. Production, Chemistry, Utilization 1989, 846-868. Pulp Chemical Association, New York. D.F. Zinkel, J. Russel (Eds.).
7. Schuller W.H., Lawrence R.V. Oxidation of levopimaric acid pine gum and various rosins with singlet oxygen. Ind. Eng. Chem. Prod. Res. Develop. 1967, 6(4):266-268.
8. Fleck E.E., Palkin S. On the nature of pyroabietic acids. J. Am. Chem. Soc. 1938, 60:921-925.
9. Fleck E.E., Palkin S. The dihydroabietic acids from so-called pyroabietic acids. J. Am. Chem. Soc. 1938, 60:2621-2622.
10. Fleck E.E., Palkin S. The composition of so-called pyroabietic acid prepared without catalyst. J. Am. Chem. Soc. 1939, 61:247-249.
11. Fleck E.E., Palkin S. The presence of dihydroabietic acid in pine oleoresin and rosin. J. Am. Chem. Soc. 1939, 61:1330-1332.
12. Fieser L., Campbell W. Substitution reactions of dehydroabietic acid. J. Am. Chem. Soc. 1938, 60:2631-2636.
13. Fieser L., Campbell W. Hydroxyl and amino derivatives of dehydroabietic acid and dehydroabietinol. J. Am. Chem. Soc. 1939, 61:2528-2534.
14. Campbell W., Morgana M. Substitution reactions of dehydroabietic acid. II. J. Am. Chem. Soc. 1941, 63:1838-1843.
15. Levinson A.S. Mononitration of methyl abieta-8,11,13-trien-18-oate. J. Org. Chem. 1971, 36(20):3062-3064.
16. Gigante B., Prazeres A.O., Marcelocurto M.J. Mild and selective nitration by claycop. J. Org. Chem. 1995, 60(11):3445-3447.
17. Schuller W.H., Lawrence R.V. Base-catalyzed isomerization of resin acids. J. Org. Chem. 1965, 30(6):2080.
18. Takeda H., Kanno H., Schuller W.H., Lawrence R.V. Effect of temperature on rosins and pine gum. Ind. Eng. Chem. Prod. Res. Develop. 1968, 7(3):186.
19. Takeda H., Schuller W.H., Lawrence R.V. Thermal isomerization of methyl abietate. J. Chem. Eng. Data 1968, 13(4):579.
20. Takeda H., Schuller W.H., Lawrence R.V. Thermal isomerization of abietic acid. J. Org. Chem. 1968, 33(4):1683.
21. Takeda H., Schuller W.H., Lawrence R.V. Thermal behavior of some resin acid esters. J. Chem. Eng. Data 1969, 14(1):89.
22. Portugal I., Vital J., Lobo L.S. Resin acids isomerization - A kinetic-study. Chem. Eng. Sci. 1992, 47(9-11):2671-2676.
23. Lloyd W.D., Hedrick G.W. Diels-Alder reaction of levopimaric acid and its use in quantitative determinations. J. Org. Chem. 1961, 26(6):2029.
24. Kotsuki H., Kataoka M., Matsuo K., Suetomo S., Shiro M., Nishizawa H. High-pressure organic-chemistry. 17. Diels-Alder reaction of methyl palustrate with maleic-anhydride and N-phenylmaleimide. J. Chem. Soc. Perkin Trans. I 1993, 22:2773-2776.
25. Bicu I., Mustata F. Allylic polymers from resin acids. Angew. Makromol. Chem. 1997, 246:11-22.
26. Bicu I., Mustata F. Study of the condensation products of abietic acid with formaldehyde at high-temperatures. Angew. Makromol. Chem. 1994, 222:165-174.
27. Bicu I., Mustata F. Allylic polymers from resin acids - Monomer synthesis at high temperature. Angew. Makromol. Chem. 1998, 255:45-51.
28. Minor J.C., Lawrence R.V. Esterification of methylolated rosin. Ind. Eng. Chem. 1958, 50(8):1127-1130.
29. Royals E.E. Pyrolysis of esters. 1. Nonselectivity in the direction of elimination by pyrolysis. J. Org. Chem. 1958, 23(11):1822.
30. Black D.K., Hedrick G.W. Condensation of paraformaldehyde with abietic acid and some of its derivatives. J. Org. Chem. 1967, 32(12):3763.
31. Stclair W.E., Minor J.C., Lawrence R.V. Fused metal resinates from aldehyde-modified rosin. Ind. Eng. Chem. 1954, 46(9):1973-1976.
32. Bicu I., Mustata F. Study of the condensation products of abietic acid with formaldehyde. Angew. Makromol. Chem. 1993, 213:169-179.
33. Hultzsch K. Uber Zusammenhange Und Abgrenzungen Bei Poly-Reaktionen. Angew. Chem. 1952, 64(13):361.
34. Burke R.E. Rosin-based printing inks. Naval Stores. Production, Chemistry, Utilization 1989, 667-700. Pulp Chemical Association, New York. D.F. Zinkel, J. Russel (Eds.).
35. Mustata F., Bicu I. Epoxy aniline formaldehyde resins modified with resin acids. Polimery 2001, 46(7-8):534-539.
36. Parkin B.A., Hedrick G.W. Chemistry of resin acids. I. Reaction of levopimaric acid with formaldehyde. J. Org. Chem. 1965, 30(7):2356.
37. Parkin B.A., Summers H.B., Settine R.L., Hedrick G.W. Production of levopimaric acid-formaldehyde adduct and hydroxymethylated materials from resin acids and rosin. Ind. Eng. Chem. Prod. Res. Develop. 1966, 5(3):257.
38. Lewis J.B., Hedrick G.W. Hydroxymethylated derivatives of resin acids - Use in polyurethane films. Ind. Eng. Chem. Prod. Res. Develop. 1970, 9(3):304.
39. Osman M.A., Marvel C.S. Polyesters from 12-hydroxymethyltetrahydroabietic acid and 12-hydroxymethyltetrahydroabietanol. J. Polym. Sci. A1 Pol. Chem. 1971, 9(5):1213.
40. Rohde W.A., Black D.K., Hedrick G.W. Resin-formaldehyde reaction - Separation of hydroxymethylated derivatives of resin acids. Ind. Eng. Chem. Prod. Res. Develop. 1973, 12(3):241-246.
41. Bingham J.F., Marvel C.S. Polymers containing 12-hydroxymethyltetrahydroabietanol. J. Polym. Sci. A1 Pol. Chem. 1972, 10(2):489.
42. Parkin B.A., Schuller W.H. Catalyst-solvent systems for dimerization of abietic acid and rosin. Ind. Eng. Chem. Prod. Res. Develop. 1972, 11(2):156.
43. Parkin B.A., Schuller W.H. Polymerized rosin - Continuous method. Ind. Eng. Chem. Prod. Res. Develop. 1973, 12(3):238-240.
44. Parkin B.A., Schuller W.H., Lawrence R.V. Thermal dimerization of rosin. Ind. Eng. Chem. Prod. Res. Develop. 1969, 8(3):304.
45. Chang T.L. Analysis of tall oil by gel permeation chromatography. Anal. Chem. 1968, 40(6):989.
46. Rohde W.A., Hedrick G.W. Esters of rosin acids and glycidyl ethers. J. Am. Oil Chem. Soc. 1970, 47(1):3.
47. Niemo L. Internal sizing of paper. Papermaking Chemistry 1999, Tappi Press, Helsinki. L. Niemo (Ed.).
48. Roberts J.C. Neutral and alkaline sizing. Paper Chemistry 1996, 140-160. Blackie Academic & Professional, London. J.C. Roberts (Ed.).
49. Gess J.M. The sizing of paper with rosin and alum at acid pHs. Paper Chemistry 1996, 120-139. Blackie Academic and Professional, Glasgow. J.C. Roberts (Ed.).
50. Strazdins E. Paper sizes and sizing. Naval Stores. Production, Chemistry, Utilization 1989, 575-624. Pulp Chemical Association, New York. D.F. Zinkel, J. Russel (Eds.).
51. Wu Z.H., Tanaka H. Behaviors of polyvinylamines in neutral rosin sizing. Mokuzai Gakkaishi 1995, 41(10):911-916.
52. Wu Z.H., Chen S.P., Tanaka H. Effects of polyamine structure on rosin sizing under neutral papermaking conditions. J. Appl. Polym. Sci. 1997, 65(11):2159-2163.
53. Wu Z.H., Chen S.P. Functions of polyamines in rosin sizing under neutral papermaking conditions. Chin. J. Polym. Sci. 2001, 19(2):217-221.
54. Hartong B., Deng Y. Evidence of ester bond contribution to neutral to alkaline rosin sizing using polyethyleneimine-epichlorohydrin as a mordant. J. Pulp Paper Sci. 2004, 30(7):203-209.
55. Xu Y., Hartong B., Deng Y. Neutral to alkaline rosin sizing using polyethyleneimine-epichlorohydrin (PEI-epi) as a mordant. J. Pulp Pap. Sci. 2002, 28(2):39-44.
56. Zhuang J.F., Biermann C.J. Neutral to alkaline rosin soap sizing with metal-ions and polyethylenimine as mordants. Tappi J. 1995, 78(4):155-162.
57. Biermann C.J. Rosin sizing with polyamine mordants from pH 3 to 10. Tappi J. 1992, 75(5):166-171.
58. Li H.J., Ni Y.H., Sain M. Further understanding on polyethyleneimine-induced rosin ester sizing. Nord. Pulp Pap. Res. J. 2003, 18(1):5-9.
59. Wang F., Kitaoka T., Tanaka H. Supramolecular structure and sizing performance of rosin-based emulsion size microparticles. Coll. Surf. A Physicochem. Eng. Aspects 2003, 221(1-3):19-28.
60. Ito K., Isogai A., Onabe F. Rosin-ester sizing for alkaline papermaking. J. Pulp Pap. Sci. 1999, 25(6):222-226.
61. Ito K., Isogai A., Onabe F. Retention behavior of size and aluminum components on handsheets in rosin-ester size alum systems. J. Wood Sci. 1999, 45(1):46-52.
62. Kitaoka T., Isogai A., Onabe F., Endo T. Sizing mechanism of rosin emulsion size-alum systems. Part 4. Surface sizing by rosin emulsion size on alum-treated base paper. Nord. Pulp Pap. Res. J. 2001, 16(2):96-102.
63. Wang F., Tanaka H. Mechanisms of neutral-alkaline paper sizing with usual rosin size using alum-polymer dual retention aid system. J. Pulp Pap. Sci. 2001, 27(1):8-13.
64. Wang F., Wu Z.H., Tanaka H. Preparation and sizing mechanisms of neutral rosin size II: Functions of rosin derivatives on sizing efficiency. J. Wood Sci. 1999, 45(6):475-480.
65. Wang T., Simonsen J., Biermann C.J. A new sizing agent: Styrene-maleic anhydride copolymer with alum or iron mordants. Tappi J. 1997, 80(1):277-282.
66. Matsushita Y., Iwatsuki A., Yasuda S. Application of cationic polymer prepared from sulfuric acid lignin as a retention aid for usual rosin sizes to neutral papermaking. J. Wood Sci. 2004, 50(6):540-544.
67. Wang F., Kitaoka T., Tanaka H. Vinylformamide-based cationic polymers as retention aids in alkaline papermaking. Tappi J. 2003, 2(12):21-26.
68. Davis C.B. Rosin soaps as polymerization emulsifiers. Naval Stores. Production, Chemistry, Utilization 1989, 625-644. Pulp Chemical Association, New York. D.F. Zinkel, J. Russel (Eds.).
69. Carr C.W., Kolthoff I.M., Meehan E.J., Williams D.E. Studies on the rate of the emulsion polymerization of butadiene-styrene (75-25) as a function of the amount and kind of emulsifier used. 2. Polymerizations with fatty acid soaps, rosin soaps, and various synthetic emulsifiers. J. Polym. Sci. 1950, 5(2):201-206.
70. Mayer M.J.J., Meuldijk J., Thoenes D. Emulsion polymerization of styrene with disproportionated rosin acid soap as emulsifier. J. Appl. Polym. Sci. 1996, 59(6):1047.
71. Cochet F., Claverie J.P., Graillat C., Sauterey F., Guyot A. Emulsion polymerization of chloroprene in the presence of a maleic polymerizable surfactant: Control of gel formation at low conversion. Macromolecules 2004, 37(11):4081-4086.
72. Zucolotto M., Darocha E.C., Vonholleben M.L.A. Disproportionation of rosin from pinus-elliotti - Obtention of emulsifier for polymerization. Quim. Nova 1995, 18(1):78-79.
73. Kennedy N.L., Krajca K.E., Russel J. Rosin in adhesive tackifiers. Naval Stores. Production, Chemistry, Utilization 1989, 645-664. Pulp Chemical Association, New York. D.F. Zinkel, J. Russel (Eds.).
74. Fattah H. Adhesives and sealants - Rosin resin makers fight back. Chem. Week 1996, 158(45):45.
75. Comyn J. Surface characterization of pentaerythritol rosin ester. Int. J. Adhes. Adhes. 1995, 15(1):9-14.
76. Shih H.H., Hamed G.R. Peel adhesion and viscoelasticity of poly(ethylene-co-vinyl acetate)-based hot melt adhesives. 1. The effect of tackifier compatibility. J. Appl. Polym. Sci. 1997, 63(3):323-331.
77. Takemoto M., Karasawa T., Mizumachi H., Kajiyama M. Miscibility between ethylene vinyl acetate copolymers and tackifier resins. J. Adhesion 2000, 72(1):85-96.
78. Barrueso-Martinez M.L., Ferrandiz-Gomez T.D., Romero-Sanchez M.D., Martin-Martinez J.M. Characterization of EVA-based adhesives containing different amounts of rosin ester or polyterpene tackifier. J. Adhesion 2003, 79(8-9):805-824.
79. Fujita M., Kajiyama M., Takemura A., Ono H., Mizumachi H., Hayashi S. Effects of miscibility on probe tack of natural-rubber-based pressure-sensitive adhesives. J. Appl. Polym. Sci. 1998, 70(4):771-776.
80. Kim D.J., Kim H.J., Yoon G.H. Effects of blending and coating methods on the performance of SIS (styrene-isoprene-styrene)-based pressure-sensitive adhesives. J. Adhes. Sci. Technol. 2004, 18(15-16):1783-1797.
81. Yang H., Sa U., Kang M., Ryu H.S., Ryu C.Y., Cho K. Near-surface morphology effect on tack behavior of poly(styrene-b-butadiene-b-styrene) triblock copolymer/rosin films. Polymer 2006, 47(11):3889-3895.
82. Aran-Ais F., Torro-Pala A.M., Orgiles-Barcelo A.C., Martin-Martinez J.M. Addition of rosin acid during thermoplastic polyurethane synthesis to improve its immediate adhesion to PVC. Int. J. Adhes. Adhes. 2005, 25(1):31-38.
83. Aran-Ais F., Torro-Palau A.M., Orgiles-Barcelo A.C., Martin-Martinez J.M. Characterization of thermoplastic polyurethane adhesives with different hard/soft segment ratios containing rosin as an internal tackifier. J. Adhes. Sci. Technol. 2002, 16(11):1431-1448.
84. Hayashi S., Kim H.J., Kajiyama M., Ono H., Mizumachi H., Zufu Z. Miscibility and pressure-sensitive adhesive performances of acrylic copolymer and hydrogenated rosin systems. J. Appl. Polym. Sci. 1999, 71(4):651-663.
85. Kim B.J., Kim S.E., Do H.S., Kim S., Kim H.J. Probe tack of tackified acrylic emulsion PSAs. Int. J. Adhes. Adhes. 2007, 27(2):102-107.
86. Downs A.M.R., Sansom J.E. Colophony allergy: A review. Contact Dermatitis 1999, 41(6):305-310.
87. Schuller W.H., Lawrence R.V., Culberts B.M. Some polyimide-amides from maleopimaric acid. J. Polym. Sci. A1 Pol. Chem. 1967, 5(8PA1):2204.
88. Maiti M., Maiti S. Polymers from renewable resources. 5. Synthesis and properties of a polyamideimide from rosin. J. Macromol. Sci. Chem. 1983, A20(1):109-121.
89. Ray S.S., Kundu A.K., Maiti M., Ghosh M., Maiti S. Polymers from renewable resources. 7. Synthesis and properties of polyamideimide from rosin-maleic anhydride adduct. Angew. Makromol. Chem. 1984, 122(JUN):153-167.
90. Kundu A.K., Adhikari B., Ray S.S., Maiti M.M., Maiti S. Compatibility of polyblends of polyamideimide from rosin and novolac. Abstr. Pap. Am. Chem. Soc. 1984, 188(AUG). 49-PMSE.
91. Ray S.S., Kundu A.K., Ghosh M., Maiti S. A new route to synthesize polyamideimide from rosin. Eur. Polym. J. 1985, 21(2):131-133.
92. Ray S.S., Kundu A.K., Maiti S. Polymers from renewable resources. 9. Synthesis and properties of a polyamideimide from rosin. J. Macromol. Sci. Chem. 1986, A23(2):271-283.
93. Kundu A.K., Ray S.S., Adhikari B., Maiti S. Polymer blends. 2. Compatibility and thermal-behavior of blends of novolac and polyamideimide from rosin. Eur. Polym. J. 1986, 22(5):369-372.
94. Kundu A.K., Ray S.S., Maiti S. Polymer blends. 4. Blends of resol with polyamideimide synthesized from rosin. Eur. Polym. J. 1986, 22(10):821-825.
95. Kundu A.K., Ray S.S., Mukherjea R.N., Maiti S. Polymer blends. 3. Preparation and evaluation of the blends of shellac with polyamideimide from rosin. Angew. Makromol. Chem. 1986, 143:197-207.
96. Ray S.S., Kundu A.K., Maiti S. Polymers from renewable resources. 12. Structure property relation in polyamideimides from rosin. J. Appl. Polym. Sci. 1988, 36(6):1283-1293.
97. Bicu I., Mustata F. Water soluble polymers from Diels-Alder adducts of abietic acid as paper additives. Macromol. Mater. Eng. 2000, 280(7-8):47-53.
98. Mustata F., Bicu I. Polyhydroxyimides from resinic acids. Polimery 2000, 45(4):258-263.
99. Kim S.J., Kim B.J., Jang D.W., Kim S.H., Park S.Y., Lee J.H., Lee S.D., Choi D.H. Photoactive polyamideimides synthesized by the polycondensation of azo-dye diamines and rosin derivative. J. Appl. Polym. Sci. 2001, 79(4):687-695.
100. Roy S.S., Kundu A.K., Maiti S. Polymers from renewable resources. 13. Polymers from rosin acrylic-acid adduct. Eur. Polym. J. 1990, 26(4):471-474.
101. Bingham J.F., Marvel C.S. Preparation and polymerization of a diisocyanate from Diels-Alder adduct of levopimaric acid and acrylic acid. J. Polym. Sci. A1 Pol. Chem. 1972, 10(3):921.
102. Krivoguz Y.M., Yuvchenko A.P., Pesetskii S.S., Bei M.P. Functionalization of polyethylene with peroxy-containing formulations derived from resins modified with maleic anhydride. Properties of blends of functionalized polyethylene with polyamide 6. Russ. J. Appl. Chem. 2004, 77(6):976-982.
103. Atta A.M., El-Saeed S.M., Farag R.K. New vinyl ester resins based on rosin for coating applications. React. Funct. Polym. 2006, 66(12):1596-1608.
104. Atta A.M., El-Saeed S.M., Farag R.K. Synthesis of polyunsatuated polyester resins based on rosin acrylic acid adduct for coating applications. React. Funct. Polym. 2007, 67(9):459-563.
105. Atta A.M., Nassar I.F., Bedawy H.M. Unsaturated polyester resins based on rosin maleic anhydride adduct as corrosion protections of steel. React. Funct. Polym. 2007, 67(7):617-626.
106. Bicu I., Mustata F. Diels-Alder polymerization of some derivatives of abietic acid. Angew. Makromol. Chem. 1999, 264:21-29.
107. Atta A.M., Mansour R., Abdou M.I., Sayed A.M. Epoxy resins from rosin acids: Synthesis and characterization. Polym. Advan. Technol. 2004, 15(9):514-522.
108. Bicu A., Mustata F. Polymers from a levopimaric acid-acrylonitrile Diels-Alder adduct: Synthesis and characterization. J. Polym. Sci. Polym. Chem. 2005, 43(24):6308-6322.
109. Atta A.M., Mansour R., Abdou M.I., El-Sayed A.M. Synthesis and characterization of tetra-functional epoxy resins from rosin. J. Polym. Res. 2005, 12(2):127-138.
110. Kim W.S., Jang H.S., Hong K.H., Seo K.H. Synthesis and photocrosslinking of poly(vinylbenzyl abietate). Macromol. Rapid Commun. 2001, 22(11):825-828.
111. Sinclair R.G., Berry D.A., Schuller W.H., Lawrence R.V. Polycondensation of resin-acid dimers with diamines. J. Polym. Sci. A1 Pol. Chem. 1971, 9(3):801.
112. Kuusipalo J. PHB/V in extrusion coating of paper and paperboard: Part I: Study of functional properties. J. Polym. Environ. 2000, 8(1):39-47.
113. Kuusipalo J. PHB/V in extrusion coating of paper and paperboard - Study of functional properties. Part II. J. Polym. Environ. 2000, 8(2):49-57.
114. Jipa S., Zaharescu T., Setnescu R., Setnescu T., Brites M.J.S., Silva A.M.G., Marcelo-Curto M.J., Gigante B. Chemiluminescence study of thermal and photostability of polyethylene. Polym. Int. 1999, 48(5):414-420.
115. Zaharescu T., Jipa S., Setnescu R., Wurm D., Brites M.J.S., Esteves M.A.F., Marcelo-Curto M.J., Gigante B. Effects of some secondary amines on the oxidation of ethylene-propylene elastomers. Polym. Degrad. Stabil. 2000, 68(1):83-86.
116. Zaharescu T., Jipa S., Setnescu R., Brites J., Esteves M.A., Gigante B. Synergistic effects on thermal stability of ethylene-propylene elastomers stabilized with hindered phenols and secondary amines. Polym. Test. 2002, 21(2):149-153.
117. Leach R.H., Pierce R.S. The printing ink manual 1993, Dordrecht, Kluwer Academic Publishers.
118. Pekarovicova A., Bhide H., Fleming P.D., Pekarovic J. Phase-change inks. J. Coating Technol. 2003, 75(936):65-72.
119. Ramani C.C., Puranik P.K., Dorle A.K. Study of diabietic acid as matrix forming material. Int. J. Pharm. 1996, 137(1):11-19.
120. Pathak Y.V., Dorle A.K. Evaluation of pentaerythritol (rosin) estergum as coating materials. Drug Dev. Ind. Pharm. 1986, 12(11-13):2217-2229.
121. Pathak Y.V., Dorle A.K. Evaluation of propylene-glycol rosin ester as microencapsulating material and study of dissolution kinetics. Drug Dev. Ind. Pharm. 1988, 14(15-17):2557-2565.
122. Pathak Y.V., Nikore R.L., Dorle A.K. Study of rosin and rosin esters as coating materials. Int. J. Pharm. 1985, 24(2-3):351-354.
123. Satturwar P.M., Fulzele S.V., Joshi S.B., Dorle A.K. Evaluation of the film-forming property of hydrogenated rosin. Drug Dev. Ind. Pharm. 2003, 29(8):877-884.
124. Fulzele S.V., Satturwar P.M., Dorle A.K. Novel biopolymers as implant matrix for the delivery of ciprofloxacin: Biocompatibility, degradation, and in vitro antibiotic release. J. Pharm. Sci. 2007, 96(1):132-144.
125. Fulzele S.V., Satturwar P.M., Dorle A.K. Study of the biodegradation and in vivo biocompatibility of novel biomaterials. Eur. J. Pharma. Sci. 2003, 20(1):53-61.
126. Fulzele S.V., Satturwar P.M., Dorle A.K. Polymerized rosin: Novel film forming polymer for drug delivery. Int. J. Pharm. 2002, 249(1-2):175-184.
127. Lee C.M., Lim S., Kim G.Y., Kim D., Kim D.W., Lee H.C., Lee K.Y. Rosin microparticles as drug carriers: Influence of various solvents on the formation of particles and sustained-release of indomethacin. Biotechnol. Bioprocess Eng. 2004, 9(6):476-481.
128. Choudhary G., Kumar J., Walia S., Parsad R., Parmar B.S. Development of controlled release formulations of carbofuran and evaluation of their efficacy against Meloidogyne incognita. J. Agric. Food Chem. 2006, 54(13):4727-4733.
129. Dhanorkar V.T., Gogte B.B., Dorle A.K. Formation and stability studies of multiple (w/o/w) emulsions prepared with newly synthesized rosin-based polymeric surfactants. Drug Dev. Ind. Pharm. 2001, 27(6):591-598.
130. Dhanorkar V.T., Gawande R.S., Gogte B.B., Dorle A.K. Development and characterization of rosin-based polymer and its application as a cream base. J. Cosmetic Sci. 2002, 53(4):199-208.
131. Snow R., Zhang J.P., Miller J.D. Froth modification for reduced fuel oil usage in phosphate flotation. Int. J. Miner. Process. 2004, 74(1-4):91-99.
132. Gopal R. Polymer concrete composites for enhancement of mobility of troops in desert operations. Mater. Sci. Eng. B Solid St. Mater. Adv. Technol. 2006, 132(1-2):129-133.