A novel and efficient epoxy/chitosan cement slurry for use in severe acidic environments of oil wells-Structural characterization and kinetic modeling

Journal of Hazardous Materials

Volumn 213-214, Issue , 2012, Pages 109-116

  Cestari, Antonio R ^a   Vieira, Eunice F S ^a   Alves, Fernanda J ^a   Silva, Ellen C S ^a   Andrade, Marcos A S ^a  

^a University Federal of Sergipe   (Brazil)

Author keywords

Chitosan; Environmental friendly materials; Epoxy resins; Kinetics; Oil well cement slurries

Indexed keywords

ACIDIC ENVIRONMENT; ACIDIZING; CEMENT SLURRY; ENVIRONMENTAL-FRIENDLY; EXPERIMENTAL DATA; FTIR; KINETIC MODELING; KINETIC MODELS; KINETIC STUDY; NEW CEMENTS; OIL WELL CEMENT SLURRIES; REFLECTANCE SPECTROSCOPY; XRD;

ACIDIZATION; CEMENTS; CHITOSAN; ENZYME KINETICS; EPOXY RESINS; IGNEOUS ROCKS; KINETIC THEORY; KINETICS; OIL WELLS; SURFACE REACTIONS;

SLURRIES;

CEMENT; CHITOSAN; EPOXY RESIN; HYDROCHLORIC ACID;

ACIDITY; AQUEOUS SOLUTION; CEMENT; CHITIN; ENHANCED OIL RECOVERY; EXPERIMENTAL STUDY; FTIR SPECTROSCOPY; OIL WELL; POLYMER; SLURRY; X-RAY DIFFRACTION;

AQUEOUS SOLUTION; ARTICLE; CEMENTATION; CHEMICAL INTERACTION; CHEMICAL STRUCTURE; ENVIRONMENTAL HEALTH; HEATING; INFRARED SPECTROSCOPY; KINETICS; OIL FIELD; REFLECTOMETRY; SOLID; THERMOGRAVIMETRY; X RAY DIFFRACTION;

ALGORITHMS; AMINES; CHITOSAN; CONSTRUCTION MATERIALS; CROSS-LINKING REAGENTS; DIFFERENTIAL THERMAL ANALYSIS; EPOXY RESINS; HYDROCHLORIC ACID; HYDROGEN-ION CONCENTRATION; INDICATORS AND REAGENTS; KINETICS; MODELS, CHEMICAL; OIL AND GAS FIELDS; SILICON DIOXIDE; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; THERMODYNAMICS; X-RAY DIFFRACTION;

EID: 84858334587     PISSN: 03043894     EISSN: 18733336     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2012.01.068     Document Type: Article

References (44)

1. Lea's Chemistry of Cement and Concrete 1998, Elsevier, Burlington. P.C. Hewlett (Ed.).
2. Le Saout G., Lecolier E., Rivereau A., Zanni H. Chemical structure of cement aged at normal and elevated temperatures and pressures. Part II. Low permeability class G oil well cement. Cem. Concr. Res. 2006, 36:428-433.
3. Portier S., Vuataz F.-D., Nami P., Sanjuan B., Gerard A. Chemical stimulation techniques for geothermal wells: experiments on the three-well EGS system at Soultz-sous-Forets, France. Geothermics 2009, 38:349-359.
4. Dorner H.W., Beddoe R.E. Prognosis of concrete corrosion due to acid attack. 9th International Conference of Building Materials 2002.
5. Silva D.A., Monteiro P.J.M. Hydration evolution of C3S-EVA composites analyzed by soft X-ray microscopy. Cem. Concr. Res. 2005, 35:351-357.
6. Chen J.J., Zampini D., Walliser A. High-pressure epoxy-impregnated cementitious materials for microstructure characterization. Cem. Concr. Res. 2002, 32:1-7.
7. Djouani F., Connan C., Chehimi M.M., Benzarti K. Interfacial chemistry of epoxy adhesives on hydrated cement paste. Surf. Interface Anal. 2008, 40:146-150.
8. Mezzenga R., Boogh L., Manson J.-A.E. A review of dendritic hyperbranched polymer as modifiers in epoxy composites. Compos. Sci. Technol. 2001, 61:787-795.
9. Zvetkov V.L., Krastev R.K., Samichkov V.I. Rate equations in the study of the DSC kinetics of epoxy-amine reactions in an excess of epoxy. Thermochim. Acta 2008, 478:17-27.
10. Ruehl R. Epoxy resins - the current topic on hazardous material. Gefahrst. Reinalt. Luft. 2010, 70:1.
11. Williams J., Nixon R. Brit. J. Dermat. 2008, 159:80-81.
12. Petrie E.M. Epoxy Adhesives Formulations 2006, Mc-Graw-Hill, New York.
13. Guibal E. Interactions of metal ions with chitosan-based sorbents: a review. Sep. Purif. Technol. 2004, 38:43-74.
14. Cestari A.R., Vieira E.F.S., Mota J.A. The removal of an anionic red dye from aqueous solutions using chitosan beads - the role of experimental factors on adsorption using a full factorial design. J. Hazard. Mater. 2008, 160:337-343.
15. Cestari A.R., Vieira E.F.S., da Rocha F.C. Kinetics of interaction of hardened oil-well cement slurries with acidic solutions from isothermal heat-conduction calorimetry. Thermochim. Acta 2005, 430:211-215.
16. Cestari A.R., Vieira E.F.S., Tavares A.M.G., Andrade M.A.S. Cement-epoxy/water interfaces - energetic, thermodynamic, and kinetic parameters by means of heat-conduction microcalorimetry. J. Colloid Interface Sci. 2010, 343:162-167.
17. Nocuń-Wczelik W., Konik Z., Stok A. Blended systems with calcium aluminate and calcium sulphate expansive additives. Constr. Build. Mater. 2011, 25:939-943.
18. Beddoe R.E., Dorner H.W. Modelling acid attack on concrete. Part I. The essential mechanisms. Cem. Concr. Res. 2005, 35:2333-2339.
19. Ershadi V., Ebadi T., Rabani A.R., Ershadi L., Soltanian H. The effect of nanosilica on cement matrix permeability in oil well to decrease the pollution of receptive environment. Int. J. Environ. Sci. Develop. 2011, 2:128-132.
20. Young J.F. Effect of organic compounds on the interconversion of calcium aluminate hydrates: hydration of monocalcium aluminate. Cem. Concr. Res. 1971, 1:113-122.
21. Popova A., Geoffroy G. Interactions between polymeric dispersants and calcium silicate hydrates. J. Am. Ceram. Soc. 2000, 83:2556-2560.
22. Dasha M., Chiellini F., Ottenbrite R.M., Chiellini E. Chitosan - a versatile semi-synthetic polymer in biomedical applications. Prog. Polym. Sci. 2011, 36:981-1014.
23. Mezzenga R., Boogh L., Månson J-A.E. A review of dendritic hyperbranched polymer as modifiers in epoxy composites. Compos. Sci. Technol. 2001, 61:787-795.
24. Hidalgo A., Domingo C., Garcia C., Petit S., Andrade C., Alonso C. Microstructural changes induced in Portland cement-based materials due to natural and supercritical carbonation. J. Mater. Sci. 2008, 43:3101-3111.
25. Björnström J., Martinelli A., Matic A., Börjesson L., Panas I. Accelerating effects of colloidal nano-silica for beneficial calcium-silicate-hydrate formation in cement. Chem. Phys. Lett. 2004, 392:242-248.
26. García-Lodeiro I., Fernández-Jiménez A., Teresa Blanco M., Palomo A. FTIR study of the sol-gel synthesis of cementitious gels: C-S-H and N-A-S-H. J. Sol-Gel Sci. Technol. 2008, 45:63-72.
27. Jennia A., Holzerb L., Zurbriggenc R., Herwegh M. Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars. Cem. Concr. Res. 2005, 35:35-50.
28. Djouani F., Connan C., Delamar M., Chehimi M.M., Benzarti K. Cement paste-epoxy adhesive interactions. Constr. Build. Mater. 2011, 25:411-423.
29. Cestari A.R., Vieira E.F.S., Pinto A.A., da Rocha F.C. Synthesis and characterization of epoxy-modified cement slurries - kinetic data at hardened slurries/HCl interfaces. J. Colloid Interf. Sci. 2008, 327:267-274.
30. Le Saoût G., Lécolier É., Rivereau A., Zanni H. Study of oilwell cements by solid-state NMR. C. R. Chimie 2004, 7:383-388.
31. Palomo A., Grutzeck M.W., Blanco M.T. Alkali-activated fly ashes: a cement for the future. Cem. Concr. Res. 1999, 29:1323-1329.
32. Chaipanich A., Nochaiya T. Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastes. J. Therm. Anal. Calorim. 2010, 99:487-493.
33. Alarcon-Ruiza L., Platretb G., Massieub E., Ehrlacher A. The use of thermal analysis in assessing the effect of temperature on a cement paste. Cem. Concr. Res. 2005, 35:609-613.
34. Antao S.M., Duane M.J., Hassan I. DTA, TG, and XRD studies of sturmanite and ettringite. Canad. Mineral. 2002, 40:1403-1409.
35. Vieira E.F.S., Cestari A.R., da Silva R.G., Pinto A.A., Miranda C.R., Conceição A.C.F. Use of calorimetry to evaluate cement slurry resistance to the attack of acid solutions. Thermochim. Acta 2004, 419:45-49.
36. Ylména R., Wadsö L., Panas I. Insights into early hydration of Portland limestone cement from infrared spectroscopy and isothermal calorimetry. Cem. Concr. Res. 2010, 40:1541-1546.
37. Nagano T., Nakashima S., Nakayama S., Osada K., Senoo M. Clays Clay Miner. 1992, 40:600-607.
38. Torrent J., Barrón V. Diffuse reflectance spectroscopy of iron oxides. Encyclopedia of Surface and Colloid Science 2002, Marcel Dekker, New York.
39. MacLaren D.C., White M.A. Cement: its chemistry and properties. J. Chem. Educ. 2003, 80:623-635.
40. Allahverdi A., Škvára F. Acidic corrosion of hydrated cement based materials. Part 2. Kinetics of the phenomenon and mathematical models. Ceramics - Silikáty 2000, 44:152-160.
41. Cestari A.R., Vieira E.F.S., Nascimento A.J.P. New factorial designs to evaluate chemisorption of divalent metals on aminated silicas. J. Colloid Interface Sci. 2001, 241:45-51.
42. Cestari A.R., Vieira E.F.S., Matos J.D.S. Determination of kinetic parameters of Cu(II) interaction with chemically modified thin chitosan membranes. J. Colloid Interface Sci. 2005, 285:288-295.
43. K.O. Moura, E.F.S. Vieira, A.R. Cestari, The use of solution microcalorimetry to evaluate chemically modified fish scales as a viable adsorbent for heavy metals, J. Therm. Anal. Calorim., in press. doi:10.1007/s10973-011-1612-8.
44. Plazinski W., Rudzinski W., Plazinska A. Theoretical models of sorption kinetics including a surface reaction mechanism: a review. Adv. Colloid Interface Sci. 2009, 152:2-13.