-
1
-
-
0036864557
-
Dynamic modelling and optimization of the resource cycle of passenger vehicles
-
van Schaik, A.; Reuter, M.; Boin, U.; Dalmijn, W. Dynamic modelling and optimization of the resource cycle of passenger vehicles Miner. Eng. 2002, 15, 1001-1016
-
(2002)
Miner. Eng.
, vol.15
, pp. 1001-1016
-
-
Van Schaik, A.1
Reuter, M.2
Boin, U.3
Dalmijn, W.4
-
2
-
-
1942485434
-
The time-varying factors influencing the recycling rate of products
-
DOI 10.1016/S0921-3449(03)00074-0, PII S0921344903000740
-
van Schaik, A.; Reuter, M. The time-varying factors influencing the recycling rate of products Resour. Conserv. Recycl. 2004, 40, 301-328 (Pubitemid 38519962)
-
(2004)
Resources, Conservation and Recycling
, vol.40
, Issue.4
, pp. 301-328
-
-
Van Schaik, A.1
Reuter, M.A.2
-
3
-
-
34447286773
-
-
Elsevier
-
Reuter, M.; Hiskannen, K.; Boin, U.; Schaik, A. v.; Verhoef, E.; Yang, Y.; Georgalli, G. The Metrics of Material and Metal Ecology; Elsevier, 2005.
-
(2005)
The Metrics of Material and Metal Ecology
-
-
Reuter, M.1
Hiskannen, K.2
Boin, U.3
Schaik, A.V.4
Verhoef, E.5
Yang, Y.6
Georgalli, G.7
-
4
-
-
32844463668
-
Fundamental limits for the recycling of end-of-life vehicles
-
DOI 10.1016/j.mineng.2005.08.014, PII S0892687505002967
-
Reuter, M.; van Schaik; Ignatenko, O.; de Haan, G. Fundamental limits for the recycling of end-of-life vehicles Miner. Eng. 2006, 19, 433-449 (Pubitemid 43254896)
-
(2006)
Minerals Engineering
, vol.19
, Issue.5
, pp. 433-449
-
-
Reuter, M.A.1
Van Schaik, A.2
Ignatenko, O.3
De Haan, G.J.4
-
5
-
-
34547208111
-
Estimation of the change in quality of domestic steel production affected by steel scrap exports
-
DOI 10.2355/isijinternational.47.753
-
Igarashi, Y.; Daigo, I.; Matsuno, Y.; Adachi, Y. Estimation of the change in quality of domestic steel production affected by steel scrap exports ISIJ. Int. 2007, 47, 753-757 (Pubitemid 47118527)
-
(2007)
ISIJ International
, vol.47
, Issue.5
, pp. 753-757
-
-
Igarashi, Y.1
Daigo, I.2
Matsuno, Y.3
Adachi, Y.4
-
6
-
-
65449158057
-
Assessment of the recycling potential of aluminum in Japan, the United States, Europe and China
-
Hatayama, H.; Daigo, I.; Matsuno, Y.; Adachi, Y. Assessment of the recycling potential of aluminum in Japan, the United States, Europe and China Mater. Trans. 2009, 50, 650-656
-
(2009)
Mater. Trans.
, vol.50
, pp. 650-656
-
-
Hatayama, H.1
Daigo, I.2
Matsuno, Y.3
Adachi, Y.4
-
7
-
-
81255164756
-
Improving aluminum recycling: A survey of sorting and impurity removal technologies
-
Gaustad, G.; Olivetti, E.; Kirchain, R. Improving aluminum recycling: A survey of sorting and impurity removal technologies Resour. Conserv. Recycl. 2012, 58, 79-87
-
(2012)
Resour. Conserv. Recycl.
, vol.58
, pp. 79-87
-
-
Gaustad, G.1
Olivetti, E.2
Kirchain, R.3
-
8
-
-
84894091463
-
-
Eds. UNEP
-
Metal Recycling: Opportunities, Limits, Infrastructure, A Report of the Working Group on the Global Metal Flows to the International Resource Panel of the United Nations Environmental Programme; Reuter, M. A.; Hudson, C.; van Schaik, A.; Heiskanen, K.; Meskers, C.; Hagelüken, C., Eds.; UNEP, 2013.
-
(2013)
Metal Recycling: Opportunities, Limits, Infrastructure, A Report of the Working Group on the Global Metal Flows to the International Resource Panel of the United Nations Environmental Programme
-
-
Reuter, M.A.1
Hudson, C.2
Van Schaik, A.3
Heiskanen, K.4
Meskers, C.5
Hagelüken, C.6
-
9
-
-
33845601571
-
Quantifying the quality loss and resource efficiency of recycling by means of exergy analysis
-
DOI 10.1016/j.jclepro.2006.01.010, PII S095965260600062X
-
Amini, S. H.; Remmerswaal, J.; Castro, M. B.; Reuter, M. A. Quantifying the quality loss and resource efficiency of recycling by means of exergy analysis J. Clean. Prod. 2007, 15, 907-913 (Pubitemid 44959945)
-
(2007)
Journal of Cleaner Production
, vol.15
, Issue.10
, pp. 907-913
-
-
Amini, S.H.1
Remmerswaal, J.A.M.2
Castro, M.B.3
Reuter, M.A.4
-
10
-
-
84865526155
-
The role of automobiles for the future of aluminium recycling
-
Modaresi, R.; Müller, D. The role of automobiles for the future of aluminium recycling. Environ. Sci. Technol. 2012,.
-
(2012)
Environ. Sci. Technol.
-
-
Modaresi, R.1
Müller, D.2
-
11
-
-
84865744417
-
Quality-and Dilution losses in the recycling of ferrous materials from end-of-life passenger cars: Input-output analysis under explicit consideration of scrap quality
-
Nakamura, S.; Kondo, Y.; Matsubae, K.; Nakajima, K.; Tasaki, T.; Nagasaka, T. Quality-and Dilution losses in the recycling of ferrous materials from end-of-life passenger cars: Input-output analysis under explicit consideration of scrap quality Environ. Sci. Technol. 2012, 46, 9266-9273
-
(2012)
Environ. Sci. Technol.
, vol.46
, pp. 9266-9273
-
-
Nakamura, S.1
Kondo, Y.2
Matsubae, K.3
Nakajima, K.4
Tasaki, T.5
Nagasaka, T.6
-
12
-
-
33750797142
-
Exploring the engine of anthropogenic iron cycles
-
DOI 10.1073/pnas.0603375103
-
Müller, D. B.; Wang, T.; Duval, B.; Graedel, T. E. Exploring the engine of anthropogenic iron cycles Proc. Natl. Acad. Sci. U. S. A. 2006, 103, 16111-16116 (Pubitemid 44715160)
-
(2006)
Proceedings of the National Academy of Sciences of the United States of America
, vol.103
, Issue.44
, pp. 16111-16116
-
-
Muller, D.B.1
Wang, T.2
Duval, B.3
Graedel, T.E.4
-
13
-
-
34247863898
-
Time-dependent material fl{ligature}ow analysis of iron and steel in the UK. Part 1: Production and consumption trends 1970-2000
-
DOI 10.1016/j.resconrec.2006.08.006, PII S0921344906001832
-
Davis, J.; Geyer, R.; Ley, J.; He, J.; Clift, R.; Kwan, A.; Sansom, M.; Jackson, T. Time-dependent material flow analysis of iron and steel in the UK Part 1: Production and consumption trends 1970-2000 Resour. Conserv. Recycl. 2007, 51, 101-117 (Pubitemid 46702530)
-
(2007)
Resources, Conservation and Recycling
, vol.51
, Issue.1
, pp. 101-117
-
-
Geyer, R.1
Davis, J.2
Ley, J.3
He, J.4
Clift, R.5
Kwan, A.6
Sansom, M.7
Jackson, T.8
-
14
-
-
34247855997
-
Time-dependent material flow analysis of iron and steel in the UK. Part 2. Scrap generation and recycling
-
DOI 10.1016/j.resconrec.2006.08.007, PII S0921344906001844
-
Davis, J.; Geyer, R.; Ley, J.; He, J.; Clift, R.; Kwan, A.; Sansom, M.; Jackson, T. Time-dependent material flow analysis of iron and steel in the UK Part 2. Scrap generation and recycling Resour. Conserv. Recycl. 2007, 51, 118-140 (Pubitemid 46702531)
-
(2007)
Resources, Conservation and Recycling
, vol.51
, Issue.1
, pp. 118-140
-
-
Davis, J.1
Geyer, R.2
Ley, J.3
He, J.4
Clift, R.5
Kwan, A.6
Sansom, M.7
Jackson, T.8
-
15
-
-
34547181334
-
Forging the anthropogenic iron cycle
-
DOI 10.1021/es062761t
-
Wang, T.; Müller, D. B.; Graedel, T. E. Forging the anthropogenic iron cycle Environ. Sci. Technol. 2007, 41, 5120-5129 (Pubitemid 47121116)
-
(2007)
Environmental Science and Technology
, vol.41
, Issue.14
, pp. 5120-5129
-
-
Wang, T.1
Muller, D.B.2
Graedel, T.E.3
-
16
-
-
59649115351
-
Material stocks and flows accounting for copper and copper-based alloys in Japan
-
Daigo, I.; Hashimoto, S.; Matsuno, Y.; Adachi, Y. Material stocks and flows accounting for copper and copper-based alloys in Japan Resour. Conserv. Recycl. 2009, 53, 208-217
-
(2009)
Resour. Conserv. Recycl.
, vol.53
, pp. 208-217
-
-
Daigo, I.1
Hashimoto, S.2
Matsuno, Y.3
Adachi, Y.4
-
17
-
-
77956517761
-
Outlook of the world steel cycle based on the stock and flow dynamics
-
Hatayama, H.; Daigo, I.; Matsuno, Y.; Adachi, Y. Outlook of the world steel cycle based on the stock and flow dynamics Environ. Sci. Technol. 2010, 44, 6457-6463
-
(2010)
Environ. Sci. Technol.
, vol.44
, pp. 6457-6463
-
-
Hatayama, H.1
Daigo, I.2
Matsuno, Y.3
Adachi, Y.4
-
18
-
-
84871326908
-
Mapping the global flow of steel: From steelmaking to end-use goods
-
Cullen, J. M.; Allwood, J. M.; Bambach, M. D. Mapping the global flow of steel: From steelmaking to end-use goods Environ. Sci. Technol. 2012, 46, 13048-13055
-
(2012)
Environ. Sci. Technol.
, vol.46
, pp. 13048-13055
-
-
Cullen, J.M.1
Allwood, J.M.2
Bambach, M.D.3
-
19
-
-
84863102184
-
Evolution of aluminum recycling initiated by the introduction of next-generation vehicles and scrap sorting technology
-
Hatayama, H.; Daigo, I.; Matsuno, Y.; Adachi, Y. Evolution of aluminum recycling initiated by the introduction of next-generation vehicles and scrap sorting technology Resour. Conserv. Recycl. 2012, 66, 8-14
-
(2012)
Resour. Conserv. Recycl.
, vol.66
, pp. 8-14
-
-
Hatayama, H.1
Daigo, I.2
Matsuno, Y.3
Adachi, Y.4
-
20
-
-
84875781217
-
The steel scrap age
-
Pauliuk, S.; Milford, R. L.; Müller, D. B.; Allwood, J. M. The steel scrap age Environ. Sci. Technol. 2013, 47, 3448-3454
-
(2013)
Environ. Sci. Technol.
, vol.47
, pp. 3448-3454
-
-
Pauliuk, S.1
Milford, R.L.2
Müller, D.B.3
Allwood, J.M.4
-
21
-
-
0742268413
-
The influence of particle size reduction and liberation on the recycling rate of end-of-life vehicles
-
van Schaik, A.; Reuter, M. A.; Heiskanen, K. The influence of particle size reduction and liberation on the recycling rate of end-of-life vehicles Miner. Eng. 2004, 17, 331-347
-
(2004)
Miner. Eng.
, vol.17
, pp. 331-347
-
-
Van Schaik, A.1
Reuter, M.A.2
Heiskanen, K.3
-
22
-
-
34447290872
-
The use of fuzzy rule models to link automotive design to recycling rate calculation
-
DOI 10.1016/j.mineng.2007.03.016, PII S0892687507000891
-
van Schaik, A.; Reuter, M. A. The use of fuzzy rule models to link automotive design to recycling rate calculation Miner. Eng. 2007, 20, 875-890 (Pubitemid 47048642)
-
(2007)
Minerals Engineering
, vol.20
, Issue.9 SPEC. ISS.
, pp. 875-890
-
-
Van Schaik, A.1
Reuter, M.A.2
-
23
-
-
11344265376
-
A dynamic model for the assessment of the replacement of lead in solders
-
Reuter, M. A.; Verhoef, E. V. A dynamic model for the assessment of the replacement of lead in solders J. Electron. Materi. 2004, 33, 1567-1580 (Pubitemid 40072855)
-
(2004)
Journal of Electronic Materials
, vol.33
, Issue.12
, pp. 1567-1580
-
-
Reuter, M.A.1
Verhoef, E.V.2
-
24
-
-
75949129627
-
Dynamic modelling of E-waste recycling system performance based on product design
-
van Schaik, A.; Reuter, M. A. Dynamic modelling of E-waste recycling system performance based on product design Miner. Eng. 2010, 23, 192-210
-
(2010)
Miner. Eng.
, vol.23
, pp. 192-210
-
-
Van Schaik, A.1
Reuter, M.A.2
-
25
-
-
80051678873
-
Limits of design for recycling and sustainability: A review
-
Reuter, M. Limits of design for recycling and sustainability: A review Waste Biomass Valorization 2011, 2, 183-208
-
(2011)
Waste Biomass Valorization
, vol.2
, pp. 183-208
-
-
Reuter, M.1
-
26
-
-
84860536512
-
Opportunities and limits of recycling: A dynamic-model-based analysis
-
Reuter, M.; van Schaik, A. Opportunities and limits of recycling: A dynamic-model-based analysis MRS Bull. 2012, 37, 339-347
-
(2012)
MRS Bull.
, vol.37
, pp. 339-347
-
-
Reuter, M.1
Van Schaik, A.2
-
27
-
-
15544389657
-
Development of methodology for analyzing the average number of times of use and the average residence time of iron element in society by applying markov chain model
-
Daigo, I.; Matsuno, Y.; Ishihara, K.; Adachi, Y. Development of methodology for analyzing the average number of times of use and the average residence time of iron element in society by applying Markov Chain Model (in Japanese with English abstract, figures and tables) Tetsu-to-Hagané 2005, 91, 159-166 (Pubitemid 40401421)
-
(2005)
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
, vol.91
, Issue.1
, pp. 159-166
-
-
Daigo, I.1
Matsuno, Y.2
Ishihara, K.N.3
Adachi, Y.4
-
28
-
-
33749563532
-
Application of Markov chain model to calculate the average number of times of use of a material in society: An allocation methodology for open-loop recycling - Part 1: Methodology development
-
DOI 10.1065/lca2006.05.246.1
-
Yamada, H.; Daigo, I.; Matsuno, Y.; Adachi, Y.; Kondo, Y. Application of Markov Chain Model to calculate the average number of times of use of a material in society an allocation methodology for open-loop recycling part 1: Methodology development Int. J. Life Cycle Assess. 2006, 11, 354-360 (Pubitemid 44535063)
-
(2006)
International Journal of Life Cycle Assessment
, vol.11
, Issue.5
, pp. 354-360
-
-
Yamada, H.1
Daigo, I.2
Matsuno, Y.3
Adachi, Y.4
Kondo, Y.5
-
29
-
-
33846893635
-
Application of Markov chain model to calculate the average number of times of use of a material in society: An allocation methodology for open-loop recycling - Part 2: Case study for steel
-
DOI 10.1065/lca2006.05.246.2
-
Matsuno, Y.; Daigo, I.; Adachi, Y. Application of Markov chain model to calculate the average number of times of use of a material in society an allocation methodology for open-loop recycling Part 2: Case study for steel Int. J. Life Cycle Assess. 2007, 12, 34-39 (Pubitemid 46224700)
-
(2007)
International Journal of Life Cycle Assessment
, vol.12
, Issue.1
, pp. 34-39
-
-
Matsuno, Y.1
Daigo, I.2
Adachi, Y.3
-
30
-
-
49949118480
-
Markov chain modeling of the global technological lifetime of copper
-
Eckelman, M. J.; Daigo, I. Markov chain modeling of the global technological lifetime of copper Ecol. Econ. 2008, 67, 265-273
-
(2008)
Ecol. Econ.
, vol.67
, pp. 265-273
-
-
Eckelman, M.J.1
Daigo, I.2
-
31
-
-
84861810748
-
Exploring the global journey of nickel with Markov chain models
-
Eckelman, M. J.; Reck, B. K.; Graedel, T. E. Exploring the global journey of nickel with Markov chain models J. Ind. Ecol. 2012, 16, 334-342
-
(2012)
J. Ind. Ecol.
, vol.16
, pp. 334-342
-
-
Eckelman, M.J.1
Reck, B.K.2
Graedel, T.E.3
-
34
-
-
36849002824
-
The waste input-output approach to materials flow analysis
-
Nakamura, S.; Nakajima, K.; Kondo, Y.; Nagasaka, T. The waste input-output approach to materials flow analysis J. Ind. Ecol. 2007, 11, 50-63
-
(2007)
J. Ind. Ecol.
, vol.11
, pp. 50-63
-
-
Nakamura, S.1
Nakajima, K.2
Kondo, Y.3
Nagasaka, T.4
-
35
-
-
32344443005
-
Waste input-output material flow analysis of metals in the japanese economy
-
DOI 10.2320/matertrans.46.2550
-
Nakamura, S.; Nakajima, K. Waste input-output material flow analysis of metals in the Japanese economy Mater. Trans. 2005, 46, 2550-2553 (Pubitemid 43219814)
-
(2005)
Materials Transactions
, vol.46
, Issue.12
, pp. 2550-2553
-
-
Nakamura, S.1
Nakajima, K.2
-
36
-
-
79851483558
-
UPIOM: A new tool of MFA and its application to the flow of iron and steel associated with car production
-
Nakamura, S.; Kondo, K.; na d Matsubae, Y.; Nakajima, K.; Nagasaka, T. UPIOM: A new tool of MFA and its application to the flow of iron and steel associated with car production Environ. Sci. Technol. 2011, 45, 1114-1120
-
(2011)
Environ. Sci. Technol.
, vol.45
, pp. 1114-1120
-
-
Nakamura, S.1
Kondo, K.2
Na Matsubae D, Y.3
Nakajima, K.4
Nagasaka, T.5
-
37
-
-
84898811726
-
Unintentional flow of alloying elements in steel during recycling of end-of-life vehicles
-
10.1111/jiec.12095
-
Ohno, H.; Matsubae, K.; Nakajima, K.; Nakamura, S.; Nagasaka, T. Unintentional flow of alloying elements in steel during recycling of end-of-life vehicles J. Ind. Ecol. 2013, 10.1111/jiec.12095
-
(2013)
J. Ind. Ecol.
-
-
Ohno, H.1
Matsubae, K.2
Nakajima, K.3
Nakamura, S.4
Nagasaka, T.5
-
38
-
-
20444380047
-
Twentieth century copper stocks and flows in North America: A dynamic analysis
-
DOI 10.1016/j.ecolecon.2004.11.018, PII S0921800904003921
-
Spatari, S.; Bertram, M.; Gordon, R. B.; Henderson, K.; Graedel, T. Twentieth century copper stocks and flows in North America: A dynamic analysis Ecol. Econ. 2005, 54, 37-51 (Pubitemid 40793418)
-
(2005)
Ecological Economics
, vol.54
, Issue.1
, pp. 37-51
-
-
Spatari, S.1
Bertram, M.2
Gordon, R.B.3
Henderson, K.4
Graedel, T.E.5
-
39
-
-
78650693180
-
Patterns of iron use in societal evolution
-
Müller, D. B.; Wang, T.; Duval, B. Patterns of iron use in societal evolution Environ. Sci. Technol. 2010, 45, 182-188
-
(2010)
Environ. Sci. Technol.
, vol.45
, pp. 182-188
-
-
Müller, D.B.1
Wang, T.2
Duval, B.3
-
40
-
-
77957877839
-
Embodied resource flows and product flows
-
Duchin, F.; Levine, S. H. Embodied resource flows and product flows J. Ind. Ecol. 2010, 14, 586-597
-
(2010)
J. Ind. Ecol.
, vol.14
, pp. 586-597
-
-
Duchin, F.1
Levine, S.H.2
-
41
-
-
72949124623
-
Analyzing polyvinyl chloride in Japan with the waste input-output material flow analysis model
-
Nakamura, S.; Nakajima, K.; Yoshizawa, Y.; Matsubae-Yokoyama, K.; Nagasaka, T. Analyzing polyvinyl chloride in Japan with the waste input-output material flow analysis model J. Ind. Ecol. 2009, 13, 706-717
-
(2009)
J. Ind. Ecol.
, vol.13
, pp. 706-717
-
-
Nakamura, S.1
Nakajima, K.2
Yoshizawa, Y.3
Matsubae-Yokoyama, K.4
Nagasaka, T.5
-
42
-
-
84877594177
-
Simultaneous MFA of nickel, chromium and molybdenum used in alloy steel by means of input-output analysis
-
Nakajima, K.; Ohno, H.; Kondo, Y.; Matsubae, K.; Takeda, O.; Miki, T.; Nakamura, S.; Nagasaka, T. Simultaneous MFA of nickel, chromium and molybdenum used in alloy steel by means of input-output analysis Environ. Sci. Technol. 2013, 47, 4563-4660
-
(2013)
Environ. Sci. Technol.
, vol.47
, pp. 4563-4660
-
-
Nakajima, K.1
Ohno, H.2
Kondo, Y.3
Matsubae, K.4
Takeda, O.5
Miki, T.6
Nakamura, S.7
Nagasaka, T.8
-
43
-
-
82455181928
-
Identifying the substance flow of metals embedded in Japanese international trade by use of waste input-output material flow analysis (WIO-MFA) model
-
Nakajima, K.; Nansai, K.; Matsubae, K.; Kondo, Y.; Kagawa, S.; Inaba, R.; Nakamura, S.; Nagasaka, T. Identifying the substance flow of metals embedded in Japanese international trade by use of waste input-output material flow analysis (WIO-MFA) model ISIJ Int. 2011, 51, 1934-1939
-
(2011)
ISIJ Int.
, vol.51
, pp. 1934-1939
-
-
Nakajima, K.1
Nansai, K.2
Matsubae, K.3
Kondo, Y.4
Kagawa, S.5
Inaba, R.6
Nakamura, S.7
Nagasaka, T.8
-
44
-
-
77954582389
-
Thermodynamic analysis of contamination by alloying elements in aluminum recycling
-
Nakajima, K.; Takeda, O.; Miki, T.; Matsubae, K.; Nakamura, S.; Nagasaka, T. Thermodynamic analysis of contamination by alloying elements in aluminum recycling Environ. Sci. Technol. 2010, 44, 5594-5600
-
(2010)
Environ. Sci. Technol.
, vol.44
, pp. 5594-5600
-
-
Nakajima, K.1
Takeda, O.2
Miki, T.3
Matsubae, K.4
Nakamura, S.5
Nagasaka, T.6
-
45
-
-
79951622950
-
Consumption-as-usual instead of ceteris paribus assumption for demand: Integration of potential rebound effects into LCA
-
Girod, B.; de Haan, P.; Scholz, R. W. Consumption-as-usual instead of ceteris paribus assumption for demand: Integration of potential rebound effects into LCA Int. J. Life Cycle Assess. 2011, 16, 3-11
-
(2011)
Int. J. Life Cycle Assess.
, vol.16
, pp. 3-11
-
-
Girod, B.1
De Haan, P.2
Scholz, R.W.3
-
46
-
-
84902316342
-
Confronting uncertainty in life cycle assessment used for decision support: Developing and proposing a taxonomy for LCA studies
-
10.1111/jiec.12085
-
Herrmann, I. T.; Hauschild, M. Z.; Sohn, M. D.; McKone, T. E. Confronting uncertainty in life cycle assessment used for decision support: Developing and proposing a taxonomy for LCA studies J. Ind. Ecol. 2014, 10.1111/jiec.12085
-
(2014)
J. Ind. Ecol.
-
-
Herrmann, I.T.1
Hauschild, M.Z.2
Sohn, M.D.3
McKone, T.E.4
-
47
-
-
84872239832
-
Steel all over the world: Estimating in-use stocks of iron for 200 countries
-
Pauliuk, S.; Wang, T.; Müller, D. B. Steel all over the world: Estimating in-use stocks of iron for 200 countries Resour. Conserv. Recycl. 2013, 71, 22-30
-
(2013)
Resour. Conserv. Recycl.
, vol.71
, pp. 22-30
-
-
Pauliuk, S.1
Wang, T.2
Müller, D.B.3
-
48
-
-
84903742704
-
-
Population Research Series 327; National Institute of Population and Social Security Research: Tokyo, Japan
-
Population Projections for Japan - A Supplement to the 2012 Revision, Population Research Series 327; National Institute of Population and Social Security Research: Tokyo, Japan, 2013.
-
(2013)
Population Projections for Japan - A Supplement to the 2012 Revision
-
-
-
49
-
-
84903705428
-
Contribution to energy savings in the society of Steel products from the point of view of LCA (in Japanese)
-
Ogawa, Y.; Kudoh, T.; Ohta, K.; Saitoh, K. Contribution to energy savings in the society of Steel products from the point of view of LCA (in Japanese) The Institute of Energy Economics 2002, http://eneken.ieej.or.jp/data/pdf/462. pdf
-
(2002)
The Institute of Energy Economics
-
-
Ogawa, Y.1
Kudoh, T.2
Ohta, K.3
Saitoh, K.4
-
50
-
-
84903716331
-
-
World Steel Association, The three Rs of sustainable steel
-
World Steel Association, The three Rs of sustainable steel. https://www.worldsteel.org/dms/internetDocumentList/fact-sheets/Fact-sheet-3Rs/ document/Fact%20sheet-3Rs.pdf.
-
-
-
-
51
-
-
33747044687
-
Durability of concrete made with EAF slag as aggregate
-
DOI 10.1016/j.cemconcomp.2006.02.008, PII S0958946506000333
-
Manso, J. M.; Polanco, J. A.; Losanez, M.; Gonzalez, J. J. Durability of concrete made with EAF slag as aggregate Cem. Concr. Compos. 2006, 28, 528-534 (Pubitemid 44209056)
-
(2006)
Cement and Concrete Composites
, vol.28
, Issue.6
, pp. 528-534
-
-
Manso, J.M.1
Polanco, J.A.2
Losanez, M.3
Gonzalez, J.J.4
-
52
-
-
33847190699
-
Recycling of an electric arc furnace flue dust to obtain high grade ZnO
-
Ruiz, O.; Clemente, C.; Alonso, M.; Alguacil, F. J. Recycling of an electric arc furnace flue dust to obtain high grade ZnO J. Hazard. Mater. 2007, 141, 33-36
-
(2007)
J. Hazard. Mater.
, vol.141
, pp. 33-36
-
-
Ruiz, O.1
Clemente, C.2
Alonso, M.3
Alguacil, F.J.4
-
53
-
-
57749090179
-
Substance Flow analysis of zinc associated with iron and steel cycle in japan, and environmental assessment of EAF dust recycling process
-
Nakajima, K.; Matsubae-Yokoyama, K.; Nakamura, S.; Itoh, S.; Nagasaka, T. Substance Flow analysis of zinc associated with iron and steel cycle in japan, and environmental assessment of EAF dust recycling process ISIJ Int. 2008, 48, 1478-1483
-
(2008)
ISIJ Int.
, vol.48
, pp. 1478-1483
-
-
Nakajima, K.1
Matsubae-Yokoyama, K.2
Nakamura, S.3
Itoh, S.4
Nagasaka, T.5
-
54
-
-
80955178942
-
Environmental life-cycle comparisons of steel production and recycling: Sustainability issues, problems and prospects
-
Yellishetty, M.; Mudd, G. M.; Ranjith, P. G.; Tharumarajah, A. Environmental life-cycle comparisons of steel production and recycling: Sustainability issues, problems and prospects Environ. Sci. Policy 2011, 14, 650-663
-
(2011)
Environ. Sci. Policy
, vol.14
, pp. 650-663
-
-
Yellishetty, M.1
Mudd, G.M.2
Ranjith, P.G.3
Tharumarajah, A.4
-
55
-
-
84892715102
-
Managing critical materials with a technology-specific stocks and flows model
-
Busch, J.; Steinberger, J. K.; Dawson, D. A.; Purnell, P.; Roelich, K. E. Managing critical materials with a technology-specific stocks and flows model Environ. Sci. Technol. 2013, 48, 1298-1305
-
(2013)
Environ. Sci. Technol.
, vol.48
, pp. 1298-1305
-
-
Busch, J.1
Steinberger, J.K.2
Dawson, D.A.3
Purnell, P.4
Roelich, K.E.5
-
56
-
-
78650793566
-
Material efficiency: A white paper
-
Allwood, J. M.; Ashby, M. F.; Gutowski, T. G.; Worrell, E. Material efficiency: A white paper Resour. Conserv. Recycl. 2011, 55, 362-381
-
(2011)
Resour. Conserv. Recycl.
, vol.55
, pp. 362-381
-
-
Allwood, J.M.1
Ashby, M.F.2
Gutowski, T.G.3
Worrell, E.4
-
57
-
-
0028500093
-
Linear programming for analysis of material recovery facilities
-
Lund, J. R.; Tchobanoglous, G.; Anex, R. P.; Lawver, R. A. Linear programming for analysis of material recovery facilities J. Environ. Eng. 1994, 120, 1082-1094 (Pubitemid 24299484)
-
(1994)
Journal of Environmental Engineering
, vol.120
, Issue.5
, pp. 1082-1094
-
-
Lund, J.R.1
Tchobanoglous, G.2
Anex, R.P.3
Lawver, R.A.4
-
58
-
-
1942485434
-
The time-varying factors influencing the recycling rate of products
-
DOI 10.1016/S0921-3449(03)00074-0, PII S0921344903000740
-
Van Schaik, A.; Reuter, M. The time-varying factors influencing the recycling rate of products Resour. Conserv. Recycl. 2004, 40, 301-328 (Pubitemid 38519962)
-
(2004)
Resources, Conservation and Recycling
, vol.40
, Issue.4
, pp. 301-328
-
-
Van Schaik, A.1
Reuter, M.A.2
-
59
-
-
34548826537
-
Modeling methods for managing raw material compositional uncertainty in alloy production
-
DOI 10.1016/j.resconrec.2007.03.005, PII S0921344907000535
-
Gaustad, G.; Li, P.; Kirchain, R. Modeling methods for managing raw material compositional uncertainty in alloy production Resour. Conserv. Recycl. 2007, 52, 180-207 (Pubitemid 47451700)
-
(2007)
Resources, Conservation and Recycling
, vol.52
, Issue.2
, pp. 180-207
-
-
Gaustad, G.1
Li, P.2
Kirchain, R.3
-
60
-
-
77954477920
-
Design for recycling evaluation and efficient alloy modification
-
Gaustad, G.; Olivetti, E.; Kirchain, R. Design for recycling evaluation and efficient alloy modification J. Ind. Ecol. 2009, 14, 286-308
-
(2009)
J. Ind. Ecol.
, vol.14
, pp. 286-308
-
-
Gaustad, G.1
Olivetti, E.2
Kirchain, R.3
-
61
-
-
84903724475
-
Forecasting Replacement Demand of Durable Goods and the Induced Secondary Material Flows: A Case Study of Automobiles
-
(accepted)
-
Kagawa, S.; Nakamura, S.; Kondo, Y.; Matsubae, K.; Nagasaka, T. Forecasting Replacement Demand of Durable Goods and the Induced Secondary Material Flows: A Case Study of Automobiles. J. Ind. Ecol. 2014, (accepted)
-
(2014)
J. Ind. Ecol.
-
-
Kagawa, S.1
Nakamura, S.2
Kondo, Y.3
Matsubae, K.4
Nagasaka, T.5
-
62
-
-
70450009339
-
A review of recent multi-region input-output models used for consumption-based emission and resource accounting
-
Wiedmann, T. A review of recent multi-region input-output models used for consumption-based emission and resource accounting Ecol. Econ. 2009, 69, 211-222
-
(2009)
Ecol. Econ.
, vol.69
, pp. 211-222
-
-
Wiedmann, T.1
-
63
-
-
84855306481
-
Frameworks for comparing emissions associated with production, consumption, and international trade
-
Kanemoto, K.; Lenzen, M.; Peters, G. P.; Moran, D. D.; Geschke, A. Frameworks for comparing emissions associated with production, consumption, and international trade Environ. Sci. Technol. 2011, 46, 172-179
-
(2011)
Environ. Sci. Technol.
, vol.46
, pp. 172-179
-
-
Kanemoto, K.1
Lenzen, M.2
Peters, G.P.3
Moran, D.D.4
Geschke, A.5
-
64
-
-
84929409455
-
The material footprint of nations
-
Wiedmann, T. O.; Schandl, H.; Lenzen, M.; Moran, D.; Suh, S.; West, J.; Kanemoto, K. The material footprint of nations Proc. Natl. Acad. Sci. U. S. A. 2013, 201220362
-
(2013)
Proc. Natl. Acad. Sci. U. S. A.
, pp. 201220362
-
-
Wiedmann, T.O.1
Schandl, H.2
Lenzen, M.3
Moran, D.4
Suh, S.5
West, J.6
Kanemoto, K.7
-
65
-
-
33746862630
-
-
Management and Coordination Agency, Government of Japan. The Federation of National Statistics Associations: Tokyo
-
Management and Coordination Agency, Government of Japan. 2000 Input-Output Tables; The Federation of National Statistics Associations: Tokyo, 2004.
-
(2004)
2000 Input-Output Tables
-
-
-
66
-
-
84903691735
-
-
Input-Output Tables of Korea
-
2005, Input-Output Tables of Korea. http://210.104.132.41/cms-data/issue/ 00029931-000a.pdf.
-
(2005)
-
-
-
67
-
-
84903699192
-
-
Bureau of Economic Analyses, Concepts and Methods of the U.S. Input-Output Accounts.
-
Bureau of Economic Analyses, Concepts and Methods of the U.S. Input-Output Accounts. 2009; http://www.bea.gov/papers/pdf/IOmanual-092906.pdf.
-
(2009)
-
-
-
68
-
-
10744220870
-
System Boundary Selection in Life-Cycle Inventories Using Hybrid Approaches
-
DOI 10.1021/es0263745
-
Suh, S.; Lenzen, M.; Treloar, H.; Hondo, G. J.; Horvath, A.; Huppes, G.; Jolliet, O.; Klann, U.; Krewitt, W.; Moriguchi, Y.; Munksgaard, J.; Norris, G. System boundary selection in life-cycle inventories using hybrid approaches Environ. Sci. Technol. 2004, 38, 657-664 (Pubitemid 38168729)
-
(2004)
Environmental Science and Technology
, vol.38
, Issue.3
, pp. 657-664
-
-
Suh, S.1
Lenzen, M.2
Treloar, G.J.3
Hondo, H.4
Horvath, A.5
Huppes, G.6
Jolliet, O.7
Klann, U.8
Krewitt, W.9
Moriguchi, Y.10
Munksgaard, J.11
Norris, G.12
-
69
-
-
70349333810
-
Assessing socioeconomic metabolism through hybrid life cycle assessment
-
Weinzettel, J.; Kovanda, J. Assessing socioeconomic metabolism through hybrid life cycle assessment J. Ind. Ecol. 2009, 13, 607-621
-
(2009)
J. Ind. Ecol.
, vol.13
, pp. 607-621
-
-
Weinzettel, J.1
Kovanda, J.2
|