Simultaneous material flow analysis of nickel, chromium, and molybdenum used in alloy steel by means of input-output analysis

Environmental Science and Technology

Volumn 47, Issue 9, 2013, Pages 4653-4660

  Nakajima, Kenichi ^a   Ohno, Hajime ^b   Kondo, Yasushi ^c   Matsubae, Kazuyo ^b   Takeda, Osamu ^b   Miki, Takahiro ^b   Nakamura, Shinichiro ^c   Nagasaka, Tetsuya ^b  

^a NATIONAL INSTITUTE FOR ENVIRONMENTAL STUDIES   (Japan)

^b TOHOKU UNIVERSITY   (Japan)

^c WASEDA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

FLOW OF MATERIAL; INPUT OUTPUT ANALYSIS; IRON-BASED ALLOY; MANUFACTURING PHASE; MATERIAL FLOW ANALYSIS; OPEN-LOOP RECYCLING; RECYCLING POLICY; SECONDARY RESOURCES;

ALLOYING; CHROMIUM; MOLYBDENUM; NATURAL RESOURCES MANAGEMENT; NICKEL; RECOVERY; RECYCLING; STEEL SCRAP; SUPPLY CHAINS;

ALLOYING ELEMENTS;

ALUMINUM; CHROMIUM; COPPER; MANGANESE; MOLYBDENUM; NICKEL;

CHROMIUM; MATERIAL FLOW ANALYSIS; MOLYBDENUM; NICKEL; RECYCLING; RESOURCE MANAGEMENT; RESOURCE USE; SORTING; STEEL;

ARTICLE; CHEMICAL ANALYSIS; FLOW MEASUREMENT; RECYCLING;

CHROMIUM; MOLYBDENUM; NICKEL; STEEL;

EID: 84877594177     PISSN: 0013936X     EISSN: 15205851     Source Type: Journal    
DOI: 10.1021/es3043559     Document Type: Article

References (39)

1. van Vuuren, D. P.; Strengers, B. J.; De Vires, H. J. M. Long-term perspectives on world metal use-A system-dynamics model Resour. Policy 1999, 25, 239-255
2. Reck, B. K.; Graedel, T. E. Challenges in metal recycling Science 2012, 337, 690-695
3. World Steel Association. Crude Steel Production; http://www.worldsteel. org/statistics/crude-steel-production.html (accessed Nov 1, 2011).
4. Hatayama, H.; Daigo, I.; Matsuno, Y.; Adachi, T. Outlook of the world steel cycle based on the stock and flow dynamics Environ. Sci. Technol. 2010, 44, 6457-6463
5. Nakajima, K.; Yokoyama, K.; Nagasaka, T. Substance flow analysis of manganese associated with iron and steel flow in Japan ISIJ Int. 2008, 48, 549-553
6. Japan Oil, Gas and Metals National Corporation (JOGMEC). Rare Metals Stockpiling Program; http://www.jogmec.go.jp/english/stockpiling/stockpiling- 015.html (accessed Oct 1, 2012).
7. Japan Oil, Gas and Metals National Corporation (JOGMEC). Mineral and Rare Metal Flow 2010; http://mric.jogmec.go.jp/public/report/2011-07/mineral- resource.pdf (accessed Oct 1, 2012) (in Japanese).
8. Castro, M. B. G.; Remmerswaal, J. A. M.; Reuter, M. A.; Boin, U. J. M. A thermodynamic approach to the compatibility of materials combinations for recycling Resour., Conserv. Recycl. 2004, 43, 1-19
9. Amini, S. H.; Remmerswall, J. A. M.; Castro, M. B.; Reuter, M. A. Quantifying the quality loss and resource efficiency of recycling by means of exergy analysis J. Cleaner Prod. 2007, 15, 907-913
10. Nakamura, S.; Kondo, Y.; Matsubae, K.; Nakajima, K.; Tasaki, T.; Nagasaka, T. Quality and dilution losses of the recycling of ferrous materials embedded in passenger cars: Input-output analysis under explicit consideration of scrap quality Environ. Sci. Technol. 2012, 46, 9266-9273
11. Katayama, H.; Mizukami, Y. Recycling of ferrous scrap Mater. Jpn. 1996, 35, 1283-1289 (in Japanese)
12. Nakajima, K.; Takeda, O.; Miki, T.; Matsubae, K.; Nagasaka, T. Thermodynamic analysis for the controllability of elements in the recycling process of metals Environ. Sci. Technol. 2011, 45, 4929-4936
13. Nakajima, K.; Takeda, O.; Miki, T.; Matsubae, K.; Nakamura, S.; Nagasaka, T. Thermodynamic analysis of contamination by alloying elements in aluminum recycling Environ. Sci. Technol. 2010, 44, 5594-5600
14. Reck, B. K.; Muller, D. B.; Rostkowski, K.; Graedel, T. E. Anthropogenic nickel cycle: Insight to use, trade, and recycling Environ. Sci. Technol. 2008, 42, 3394-3400
15. Johnson, J.; Schewel, L.; Graedel, T. E. The contemporary anthropogenic chromium cycle Environ. Sci. Technol. 2006, 40, 7060-7069
16. Daigo, I.; Matsuno, Y.; Adachi, Y. Substance flow analysis of chromium and nickel in the material flow of stainless steel in Japan Resour., Conserv. Recycl. 2010, 54, 851-863
17. Nakajima, K.; Yokoyama, K.; Matsuno, Y.; Nagasaka, T. Substance flow analysis of molybdenum associated with iron and steel flow in Japanese economy ISIJ Int. 2007, 47, 510-515
18. Nakamura, S.; Nakajima, K. Waste input-output material flow analysis of metals in the Japanese economy Mater. Trans. 2005, 46, 2550-2553
19. Nakamura, S.; Nakajima, K.; Kondo, Y.; Nagasaka, T. The waste input-output approach to materials flow analysis J. Ind. Ecol. 2007, 11, 50-63
20. The Japan Iron and Steel Federation. Handbook for Iron and Steel Statistics 2003; The Japan Iron and Steel Federation: Tokyo, Japan, 2003.
21. The Japan Iron and Steel Federation. Statistics and Analysis; http://www.jisf.or.jp/en/statistics/ (accessed Oct 1, 2012).
22. Nakamura, S.; Kondo, Y.; Matsubae, K.; Nakajima, K.; Nagasaka, T. UPIOM: A new tool of MFA and its application to the flow of iron and steel associated with car production Environ. Sci. Technol. 2011, 45, 1114-1120
23. Schmidt, M. The Sankey diagram in energy and material flow management. Part I: History J. Ind. Ecol. 2008, 12, 82-94
24. Schmidt, M. The Sankey diagram in energy and material flow management. Part II: Methodology and current applications J. Ind. Ecol. 2008, 12, 173-185
25. Ministry of Internal Affairs and Communications Japan. 2000 Input-Output Tables; The Federation of National Statistics Associations: Tokyo, Japan, 2004.
26. Japan Environmental Sanitation Center (JESC). Survey to Promote Streamlining of End-of-Life Vehicle Recycling; JESC: Kawasaki, Japan, 2009; pp 24-26.
27. Miller, W. S.; Zhuang., L.; Bottema, J.; Wittebrood, A. J.; De Smet, P.; Haszler, A.; Vieregge, A. Recent development in aluminium alloys for the automotive industry Mater. Sci. Eng. 2000, A280, 37-49
28. European Aluminum Association. Aluminum in Cars; http://www.alueurope.eu/ pdf/Aluminium-in-cars-Sept2008.pdf (accessed March 1, 2013).
29. Reuter, M. A.; van Schaik, A.; Ignatenko, O.; de Haan, G. J. Fundamental limits for the recycling of end-of-life vehicles Miner. Eng. 2006, 19, 443-449
30. Lenzen, M.; Wood., R.; Wiedmann., T. Uncertainty analysis for multi-region input-output models: A case study of the UK's carbon footprint Econ. Syst. Res. 2010, 22, 43-63
31. Nakajima, K.; Nanasai, K.; Matsubae, K.; Kondo, Y.; Kagawa, S.; Inaba, R.; Nakamura, S.; Nagasaka, T. Identifying the substance flow of metals embedded in Japanesese international trade by use of waste input-output material flow analysis (WIO-MFA) model ISIJ Int. 2011, 51, 1934-1939
32. Halada, K. Sustainability risk of metals and elements Mater. Jpn. 2007, 46, 543-548 (in Japanese)
33. National Institute for Materials Science (NIMS). Overview of total material requirement. NIMS-EMC Materials Data for the Environment No.18; NIMS: Tsukuba, Japan, 2009.
34. Bringezu, S.; Schütz.; Stenger, S.; Baudisch, J. International comparison of resource use and its relation to economic growth. The development of total material requirement, direct material inputs and hidden flows and the structure of TMR Ecol. Econ. 2011, 51, 97-124
35. Reck, B. K.; Chambon, M.; Hashimoto, S.; Graedel, T. E. Global stainless steel cycle exemplifies China's rise to metal dominance Environ. Sci. Technol. 2010, 44, 3940-3946
36. Owada, S.; Tsuchiya, K.; Takasugi, A.; Kato, Y.; Funakoshi, T.; Tanno, H. XRT and XRF sorting for the mutual separation of aluminum alloys to achieve "sash to sash" recycling. Proceedings of the 11th International Symposium on East Asian Resources Recycling Technology (EARTH2011); Plenary Lecture, Kaohsiung, Taiwan, Oct 31-Nov 4, 2011; pp 52-55.
37. Mesina, M. B.; Jong, de, T. P. R.; Dalmijn, W. L. Automatic sorting of scrap metals with a combined electromagnetic and dual energy X-ray transmission sensor Int. J. Miner. Process. 2007, 82, 222-232
38. van Schaik, A.; Reuter, M. A. Dynamic modeling of E-waste recycling system performance based on product design Miner. Eng. 2010, 23, 192-210
39. Olivetti, E. A.; Gaustad, G. G.; Field, F. R.; Kirchain, R. E. Increasing secondary and renewable material use: A chance constrained modeling approach to manage feedstock quality variation Environ. Sci. Technol. 2011, 45, 4118-4126