Biological oils as precursors to novel polymeric materials

Journal of Renewable Materials

Volumn 1, Issue 3, 2013, Pages 167-186

  Petrović, Zoran S ^a   Javni, Ivan ^a   Ionescu, Mihail ^a  

^a PITTSBURG STATE UNIVERSITY   (United States)

Author keywords

Biological oils; Polymeric materials; Precursors

Indexed keywords

PETROLEUM INDUSTRY;

BIOLOGICAL OIL; OIL BASED PRODUCTS; OLEOCHEMICALS; PRECURSORS;

POLYMERS;

EID: 84903585764     PISSN: 21646325     EISSN: 21646341     Source Type: Journal    
DOI: 10.7569/JRM.2013.634112     Document Type: Article

References (366)

1. A.E. Bailey and Y.H. Hui, Bailey's Industrial Oil and Fat Products, 5th Edn., Wiley, New York (1996).
2. F.D. Gunstone, The Chemistry of Oils and Fats. CRC Press LLC, Boca Raton, FL (2004).
3. F.D. Gunstone and R.J. Hamilton, (Eds.), Oleochemical Manufacture and Applications, 1st Edn., Sheffield Academic Press, Sheffield, UK (2001).
4. L. Spitz, (Ed.), Sodeopec: Soaps, Detergents, Oleochemicals and Personal Care Products. AOCS Press, Champaign, Illinois (2004).
5. Y. Xia and R.C. Larock, Vegetable oil-based polymeric materials: Synthesis, properties, and applications. Green Chem. 12, 1893-1909 (2010).
6. U. Biermann, U. Bornscheuer, M.A.R. Meier, J.O. Metzger, and H.J. Schaefer, Oils and fats as renewable raw materials in chemistry. Angew. Chem. Int. Ed. 50, 3854-3871 (2011).
7. J.C. Ronda, G. Lligadas, M. Galia, and V. Cádiz, Vegetable oils as platform chemicals for polymer synthesis. Eur. J. Lipid Sci.Technol. 113, 46-58 (2011).
8. U. Biermann, W. Friedt, S. Lang, W. Luehs, G. Machmueller, J.O. Metzger, M.R. Klaas, H.J. Schaefer, and M.P. Schneider, New Synthesis with oils and fats as renewable raw materials for the chemical industry. Angew. Chem. Int. Ed. 39, 2206-2224 (2000).
9. M. Makkee, T.V.M. Rao, and M.M. Clavero, Fluid catalytic cracking of vegetable oil: Effective strategies for enhanced gasoline production. Presented at the 22nd North American Catalysis Society Meeting, Detroit, (2011) (unpublished).
10. T.V.M. Rao, M.M. Clavero, and M. Makkee, Effective gasoline production strategies by catalytic cracking of rapeseed vegetable oil in refinery conditions. ChemSus-Chem 3(7), 807-810 (2010).
11. N. Taufiqurrahmi and S. Bhatia, Catalytic cracking of edible and non-edible oils for the production of biofuels. Energy Environ. Sci. 4, 1087-1112 (2011).
12. P. Zámostný, Z. Bêlohlav, and J. Šmidrkal, Production of olefins via steam cracking of vegetableoils. Resources Conserv. Recycling 59, 47-51 (2012).
13. D. Firestone, (Ed.), Physical and Chemical Characteristics of Oils, Fats, and Waxes, 2nd Edn., AOCS Press, (2006).
14. F.D. Gunstone, J.L. Harwood, and A.J. Dijkstra, The Lipid Handbook with CD-ROM, 3rd Edn., CRC Press, (2007).
15. Z.S. Petrovic, Polyurethanes from vegetable oils. Polym. Rev. 48(1), 109-155 (2008).
16. Z. Cohen and C. Ratledge, (Eds.), Single Cell Oils, AOCS Press, Champaign, Illinois (2005).
17. Z.S. Petrovic, L. Yang, A. Zlatanic, W. Zhang, and I. Javni, Network structure and properties of polyurethanes from soybean oil. J. Appl. Polym. Sci. 105(5), 2717-2727 (2007).
18. Z.S. Petrovic, A. Guo, I. Javni, I. Cvetkovic, and D.P. Hong, Polyurethane networks from polyols obtained by hydroformylation of soybean oil. Polym. Int. 57(2), 275-281 (2008).
19. A. Zlatanic, Z.S. Petrovic, and K. Dusek, Structure and properties of triolein-based polyurethane networks. BioMacromolecules 3(5), 1048-1056 (2002).
20. M. Ionescu, X. Wan, N. Bilic, and Z.S. Petrovic, Polyols and rigid polyurethane foams from cashew nut shell liquid. J. Polym. Environ. 20(3), 647-658 (2012).
21. T. Gallina Toschi, M.F. Caboni, G. Penazzi, G. Lercker, and P. Cappela, A study of cashew nut oil composition. J. Am. Oil Chem. Soc. 70(10), 1017-1020 (1993).
22. A. Guo, Y.-J. Cho, and Z.S. Petrovic, Structure and properties of halogenated and non-halogenated soybased polyols. J. Polym.Sci. Part A Polym. Chem. 38, 3900-3910 (2000).
23. D.A. Babb, Polyurethanes from renewable resources. Adv. Polym. Sci. 245, 315-360 (2012).
24. S.M. Erhan and R. Kleiman, Factice from oil mixtures. J. Am. Oil Chem. Soc. 3(70), 309-311 (1993).
25. R.B. Simpson, (Ed.), Rubber Basics, RAPRA Technology Ltd., Shabury, Shrewsbury, Shropshire, UK (2002).
26. S.Z. Erhan and M.O. Bugby, Polymerization of vegetable oils and their uses in printing inks. J. Am. Oil Chem. Soc. 71(11), 1223-1226 (1994).
27. S.Z. Erhan and M.O. Bagby, Vegetable Oil-based offset printing inks, US Patent 5,713,990, assigned to The United States of America as represented by the Secretary of Agriculture (February 3, 1998).
28. C. Wang and S. Erhan, Studies of thermal polymerization of vegetale oil with a differential scanning calorimeter. J. Am. Oil Chem. Soc. 76(10), 1211-1216 (1999).
29. I.M. Bernstein, Heat polymerization of nonconjugated vegetable oils. J. Polym. Sci. 3(6), 495-528 (1946).
30. R.F. Paschke and D.H. Wheeler, Inter-and intramolecular polymerization in heat bodied linseed oil. J. Am. Oil Chem. Soc. 31(5), 2008-2211 (1954).
31. T.F. Bradley and R.W. Tess, Thermal polymerisation of esters of drying oil acids. Ind. Eng. Chem. 41(2), 310-319 (1949).
32. W.C. Ault, J.C. Cowan, J.P. Icass, and J.E. Jacksos, Polymerization of drying oils. Ind. Eng. Chem. 34(9), 1120-1123 (1942).
33. P.O. Powers, Mechanism of the heat bodying linseed oil. J. Polym. Sci. 5(6), 741-743 (1950).
34. P.O. Powers, Heat bodying of drying oils. J. Am. Oil Chem. Soc. 27(11), 468-472 (1950).
35. M. Arca, B.K. Sharma, N.P.J. Price, J.M. Perez, and K.M. Doll, Evidence contrary to the accepted Diels-Alder mechanism in the thermal modification of vegetable oil. J. Am. Oil Chem. Soc. 89(6), 987-994 (2012).
36. R. Christianson, M. Noble, A. Rourke, E. Geiger, and L. Mahlum, Process for preparing blown vegetable oils, US Patent 7,262,311, assigned to South Dakota Soybean Processors (August 28, 2007).
37. E. Geiger, N.M. Becker, and L.A. Armbruster, Novel polyols derived from vegetable oil using an oxidation process, WO Patent 094227, assigned to South Dakota Soybean Processors.
38. N.A. Porter, S.E. Caldwell, and K.A. Mills, Mechanisms of free radical oxidation of unsaturated lipids. Lipids 30(4), 277-290, (1995).
39. E.N. Frankel, Lipid oxidation. Prog. Lipid Res. 19, 1-22 (1980).
40. E.N. Frankel, Lipid Oxidation, The Oily Press Ltd., Dundee, UK (1998).
41. M. Ionescu and S.Z. Petrovic, Polymerization of Soybean Oil with Superacids, InTech, (2011) http://www.intechopen. com/articles/show/title/polymerization-ofsoybean-oil-with-superacids.
42. R. Uloth and M.-M. Cunradi, Agents suitable for improving lubricants, US Patent 2,365,919, assigned to vested in the Alien Property Custodian (December 26, 1944).
43. E. Eichvald, Process for stabilizing fatty oil polymers, US Patent 2,160,572, assigned to Shell Development Co. (May 30, 1939).
44. L. Zengshe, S. Brajendra, and S. Erhan, From oligomers to molecular giants of soybean oil in supercritical carbon dioxide medium. Biomacromolecules 8, 233-239 (2007).
45. F. Li and R.C. Larock, Thermosetting polymers from cationic copolymerization of tung oil: Synthesis and characterization. J. Appl. Polym. Sci. 78(5), 1044-1056 (2000).
46. R.C. Larock and M. Hanson, Lewis acid-catalyzed polymerization of biological oils and resulting polymeric materials, US Patent 6,211,315, assigned to Iowa State University Research Foundation, Inc. (April 3, 2001).
47. F. Li and R. Larock, New soybean oil-styrene-divinylbenzene thermosetting copolymers. II: Dynamic mechanical properties. J. Polym. Sci. Part B Polym. Phys. 38(11), 2721-2738 (2000).
48. F. Li and R. Larock, New soybean oil-styrene-divinylbenzene thermosetting copolymers. I: Synthesis and characterization. J. Appl. Polym. Sci. 80(4), 658-670 (2001).
49. F. Li and R. Larock, New soybean oil-styrene-divinylbenzene thermosetting copolymers. III: Tensile stressstrain behavior. J. Polym. Sci. Part B Polym. Phys. 39(1), 60-77 (2001).
50. F. Li, R. Larock, and J. Otaigbe, Fish oil thermosetting polymers: Creep and recovery behavior. Polymer 41(13), 4849-4862 (2000).
51. F. Li, D. Marks, R. Larock, and J. Otaigbe, Fish oil thermosetting polymer: Synthesis, structure, properties and their relationships. Polymer 41(22), 7925-7939 (2000).
52. S.W. Turner and C.W. Blewett, Process for production of polybasic acid esters with recovery of boron trifluoride, US Patent 4,973,743, assigned to Henkel Corp. (November 27, 1990).
53. C.B. Croston, I.L. Tubb, J.C. Cowan, and H.M. Teeter, Polymerization of drying oils. VI. catalytic polymerization of fatty acids and esters with boron trifluoride and hydrogen fluoride. J. Am. Oil Chem. Soc. 29(8), 331-333 (1952).
54. S.M. Ghodssi, A.J. Petit, and H. Valot, Contribution a I'étude de Ia polymerisation cationique de I'acide oléique et de ses dérivés. Etude des dimeres. Bull. Soc. Chim. Fr. (4), 1461-1466 (1970).
55. N.H. Conroy, Polymerization of unsaturated fatty acids, US Patent 3,632,822, assigned to Arizona Chemical Co. (January 4, 1972).
56. J.E. Milks and N.H. Conroy, Two-stage polymerization of of unsaturated fatty acids, US Patent 3,422,124, assigned to Arizona Chemical Co. (January 4, 1969).
57. J.J. Vreeswijk and K.D. Haase, Dimerized fatty acids having high content of dicarboxylic acid, US Patent 4,937,320, assigned to Unilever Patent Holdings B.V. (June 26, 1990).
58. D.H. Wheeler, Magnesium silicate catalyzed polymerization of unsaturated fatty acid, US Patent 3,444,220, assigned to General Mills, Inc. (May 13, 1969).
59. K.S. Hayes, Polymerization of fatty acids, UK Patent GB2,172,597, assigned to Union Camp (September 24, 1986).
60. E. DiFranco, Method for isolating oleic acid and producibng linoleic dimer/trimer acids via selective reactivity, US Patent 6,835,324 B1, assigned to Arizona Chemical Company (December 28, 2004).
61. M. Ionescu and Z.S. Petrovic, Cationic polymerization of biological oils with superacid catalysts US Patent 7,501,479, assigned to Pittsburg State University (March 10, 2009).
62. Z.S. Petrovic, M. Ionescu, J. Milic, and J.R. Halladay, Soybean oil plasticizers as replacement of petroleum oil in rubber. Rubber Chem.Technol. (2013).
63. D. Swern, T.W. Findley, and J.T. Scanlan, Epoxidation of oleic acid, methyl oleate and oleyl alcohol with perbenzoic acid. J. Am. Chem. Soc. 66(11), 1925-1927 (1944).
64. D. Swern, G.N. Billen, T.W. Findley, and J.T. Scanlan, Hydroxylation of monounsaturated fatty materials with hydrogen peroxide. J. Am. Chem. Soc. 67, 1786-1789 (1945).
65. F.P. Greenspan and R.J. Gall, In situ epoxidation of oleic acid using formic acid, US Patent 2,774,774, assigned to Food Machinery and Chemical Corp. (December 18, 1956).
66. F.P. Greenspan and R.J. Gall, Epoxidation of unsaturated higher fatty acids esters with ion-exchange resins, US Patent 2,919,283, assigned to Food Machinery and Chemical Corp. (December 29, 1959).
67. L.I. Hansen and A.G. Coutsicos, Epoxidation Process, US Patent 3,328,430, assigned to Archers-Daniels-Middland Co. (June 27, 1967).
68. L.I. Hansen and G.O. Sadgwick, Method of preparing epoxidized oil and the like, US Patent 3,051,729, assigned to Archers-Daniels-Midland Co. (August 28, 1962).
69. J. Wisniak and E. Navarrete, Epoxidation of fish oil, kinetic and optimization model. Ind. Eng. Chem. Prod. Res. Develop. 9(1), 33-41 (1970).
70. P.E. Sonnet and T.A. Foglia, Epoxidation of natural triglycerides with ethylmethyldioxirane. J. Am. Oil Chem. Soc. 73(4), 461-464 (1996).
71. A. Corma, S. Iborra, and A. Velty, Chemical routes for the transformation of biomass into chemicals. Chem. Rev. 107, 2411-2502 (2007).
72. Y. Itoi, M. Inoue, and S. Enomoto, Epoxidation of fatty acid esters with aqueous hydrogen peroxide in the presence of molybdenum oxide-tributyltin chloride on charcoal catalyst. Bull. Chem. Soc. Jpn. 59(12), 3941-3943 (1986).
73. A. Debal, G. Rafaralahitsimba, and E. Ucciani, Epoxidation of fatty acid methyl esters with organic hydroperoxides and molybdenum oxide. Fett Wiss Technol. -Fat Sci.Technol. 95(6), 236-239 (1993).
74. J.V. Crivello and R. Narayan, Epoxidized triglycerides as renewable monomers in photoinitiated cationic polymerization. Chem. Mater. 4(3), 692-699 (1992).
75. M.E. Abraham and R.F. Benenati, Kinetics and mechanism of the epoxidation of unsaturated fatty acids. AIChE J. 18(4), 807-811 (1972).
76. K.D. Carlson and S.P. Chang, Chemical epoxidation of a natural unsaturated epoxy seed oil from vernoniagalamensis and a look at epoxy oil markets. J. Am. Oil Chem. Soc. 62(5), 934-939 (1985).
77. A.E. Gerbase, J.R. Gregório, M. Martinelli, M.C. Brasil, and A.N.F. Mendes, Epoxidation of soybean oil by the methyltrioxorhenium-CH2Cl2/H2O2 catalytic biphasic system. J. Am. Oil Chem. Soc. 79(2), 179-181 (2002).
78. Z.S. Petrovic, A. Zlatanic, C. Lava, and S. Sinadinovic-Fisher, Epoxidation of soybean oil in toluene with peroxoacetic and peroxoformic acids -Kinetics and side reactions. Eur. J. Lipid Sci. Technol. 104, 293-299 (2002).
79. P.J. Martinez de la Cuesta, E. Rus Martinez, and J.A. Garcia, Castor oil epoxidation with isopropylbenzene hydroperoxide. Process optimization. Influence of variables. Kinetic study. Grasas Y Aceites (Sevilla) 39(2), 82-88 (1988).
80. P.J. Martinez de la Cuesta, E. Rus Martinez, and V. Roman Cortes, Epoxidation of corn oil with molecular-oxygen -influence of variables -kinetic study. Anales De Quimica 88(2), 197-204 (1992).
81. Y. Sawaki and Y. Ogata, The kinetics of the acid-catalyzed formation of peracetic acid from acetic acid and hydrogen peroxide. Bull. Chem. Soc. Jpn. 38, 2103 (1965).
82. P. Daute, R. Gruetzmacher, and N. Mertscheit, Epoxide ring-opening products with specified residual epoxy content and their preparation, Patent DE 4,115,146 A1, assigned to Henkel K.-G.a.A., Germany.
83. C.A. Chalabiev, M.M. Guseinov, M.S. Salakhov, E.N. Novozhilov, O.A. Sadygov, and L.M. Paller, Epoxidation of soybean oil by peracetic-acid with KU-2 cation-exchanger as catalyst. J. Appl. Chem. USSR 51(9), 1927-1931 (1978).
84. K.D. Carlson, R. Kleiman, and M.O. Bagby, Epoxidation of lesquerella and limnanthes (meadowfoam) oils. J. Am. Oil Chem. Soc. 71(2), 175-182 (1994).
85. E. Ucciani, A. Bonfand, G. Rafaralahitsimba, and G. Cecchi, Epoxidation of monoenic fatty esters with cumylhydroperoxide and hexacarbonylmolybdenum. Rev. Fr. Corps Gras 39(9-10), 279-283 (1992).
86. E. Ucciani, A. Debal, and G. Rafaralahitsimba, Epoxidation of fatty acid methyl esters with organic hydroperoxides and molybdenum oxide. Eur. J. Lipid Sci. Technol 95(6), 236-239 (1993).
87. B. Gruber, Process for the production of epoxidized fatty alcohols, Germany Patent 5,026,881, assigned to Henkel Corp.
88. L.H. Gan, S.H. Goh, and K.S. Ooi, Kinetic studies of epoxidation and oxirane cleavage of palm olein methyl esters. J. Am. Oil Chem. Soc. 69(4), 347-351 (1992).
89. S. Sinadinovic-Fišer, M. Jankovic, and Z.S. Petrovic, Kinetics of "in situ" epoxidation of soybean oil in bulk catalyzed by ion exchange resin. J. Am. Oil Chem. Soc. 78, 725 (2001).
90. K. Eckwert, L. Jeromin, A. Meffert, E. Peukert, and B. Gutsche, Process for the epoxidation of olefinically unsaturated hydrocarbon compounds with peracetic acid, US Patent 4,647,678, assigned to Henkel Corp. (March 3, 1987).
91. B.M. Badran, F.M. Elmehelmy, and N.A. Ghanem, Insitu epoxidation of linseed oil in presence of ionexchange resins. J. Oil Colour Chem. Assoc. 59(8), 291-294 (1976).
92. S.T. Oyama, (Ed.), Mechanisms in Homogeneous and Heterogeneous Epoxidation Catalysis, Elsevier, Amsterdam 2008.
93. Y.P. Getmanchuk and E.V. Blazhko, Mechanism of cationic polymerization of glycidic esters. Theor. Exp. Chem. 21(6), 686-690 (1985).
94. Z. Liu and S.Z. Erhan, Ring-opening polymerization of epoxidized soybean oil. J. Am. Oil Chem. Soc. 87, 437-444 (2010).
95. Y. Kawakami, A. Ogawa, and Y. Yamashita, Reaction scheme in the cationic polymerization of substituted epoxides. J. Polym. Sci. Polym. Chem. Ed. 17, 3785-3792 (1979).
96. G. Lligadas, J.C. Ronda, M. Galia, U. Biermann, and J.O. Metzger, Synthesis and characterization of polyurethanes from epoxidized methyl oleate based polyether polyols as renewable resources. J. Polym. Sci. Part A Polym. Chem. 44, 634-645 (2006).
97. J. Roesch and R. Muelhaupt, Polymers from renewable resources: Polyester resins and blends based upon anhydride-cured epoxidized soybean oil. Polym. Bull. (Berlin) 31(6), 679-685 (1993).
98. Z.S. Petrovic, W. Zhang, R. Miller, and I. Javni, Epoxy Resins from Vegetable Oils, in ANTEC, pp. 1-3, SPE, San Francisco (2002).
99. D. Hong, I. Javni, and Z.S. Petrovic, Vegetable Oil Based Epoxy Resins, in 2009 SAMPE Fall Technical Conference & Exhibition, pp. 19-22, Wichita, KS, (2009).
100. M. Clericuzio, S. Cobianco, M. Fabbi, A. Lezzi, and L. Montanari, The cationic ring-opening polymerization of 7-tetradecene oxide with methyl trifluoromethansulfonate. An investigation of the mechanism and the kinetics by means of 1H, 13C and 19F NMR. Polymer 40, 1839-1851 (1999).
101. J.V. Crivello, R. Narayan, and S.S. Sternstein, Fabrication and mechanical characterization of glass fiber reinforced UV-cured composites from epoxidized vegetable oils. J. Appl. Polym. Sci. 64, 2073-2087 (1997).
102. D.T. Haworth and G.F. Pollnow, Boron curing agents for epoxy resins. Ind. Eng. Chem. Prod. Res. Dev. 1(3), 185-187 (1962).
103. E.J. Krol, Epoxy foams pepared by the reaction of polyepoxide with a boroxine and an amine borane, US Patent 3,355,306, assigned to Callery Chemical Co. (November 28, 1967).
104. R. Muelhaupt, The use of renewable resources -possibilities and limitations. Chimia 50(5), 191-198 (1996).
105. F.I. Altuna, L.H. Espósito, R.A. Ruseckaite, and P.M. Stefani, Thermal and mechanical properties of anhydride-cured epoxy resins with different contents of biobased epoxidized soybean oil. J. Appl. Polym. Sci. 120(2), 789-798 (2011).
106. S. Zeggio and F. Bassetto, Use of vegetable oil-based thermosetting resins in compound stone technology, in 2nd Workshop Fats and Oils as Renewable Feedstock for the Chemical Industry, Emden, Germany, (2009).
107. L.C. Lopez, J.D. Earla, J.E. White, Z. Lysenko, and M.L. Deloff, Network polymers comprising epoxyterminated esters, US Patent 7,247,684 B2, assigned to Dow Global Technologies Inc., (July 24, 2007).
108. D.M. Casper and T. Newbold, Methods of preparing hydroxy functional vegetable oils, US Patent 7,893,287, assigned to BioBased Technologies LLC (February 22, 2011).
109. L.L. Monteavaro, E.O. Da Silva, A.P.O. Costa, D. Samios, A.E. Gerbase, and C.L. Petzhold, Polyurethane networks from formiated soy polyols: Synthesis and mechanical characterization, J. Am. Oil Chem. Soc. 82, 365-371 (2005).
110. R. Hoefer, G. Stoll, P. Daute, and R. Gruetzmacher, Use of reaction mixtures containing polyester polyols in the production of solid polyurethane materials by casting, US Patent 5,302,626, assigned to Henkel Corp. (April 12, 1994).
111. S. Miao, S. Zhang, Z. Su, and P. Wang, A novel vegetable oil-lactate hybrid monomer for synthesis of high-Tg polyurethanes. J. Polym. Sci Part A Polym. Chem. 48, 243-250 (2010).
112. B. Dahlke, S. Hellbardt, M. Paetow, and W.H. Zech, Polyhydroxy fatty acids and their derivatives from plant oils. J. Am. Oil Chem. Soc. 72(3), 349-353 (1995).
113. B. Gruber, R. Hoefer, H. Kluth, and A. Meffert, Polyols on the basis of oleochemical raw materials. Fett Wiss. Technol. 89(4), 147-151 (1987).
114. A. Biswas, B.K. Sharma, J.L. Willett, A. Advaryu, S.Z. Erhan, and H.N. Cheng, Azide derivatives of soybean oil and fatty esters. J. Agric. Food Chem. 56, 5611-5616 (2008).
115. J. Hong, Q. Luo, and B.K. Shah, Catalyst-and solventfree "Click" chemistry: A facile approach to obtain cross-linked biopolymers from soybean oil. Biomacromolecules 11, 2960-2965 (2010).
116. C.S. Nevin, Preparation of polymerizable vinylated compounds, US Patent 3,125,592, assigned to A.E.Staley Manufacturing Co. (March 17, 1964).
117. G.W. Borden, O.W. Smith, and D.J. Trecker, Acrylated epoxidized soybean oil amine compositions and method of curing same, US Patent 3,876,518, assigned to Union Carbide Corporation, New York, NY (April 8, 1975).
118. J. La Scala and R.P. Wool, The effect of fatty acid composition on the acrylation kinetics of epoxidized triacylglycerols. J. Am. Oil Chem. Soc. 79(1), 59-63 (2002).
119. S.S. Narine and X. Kong, Vegetable Oils in Production of Polymers and Plastics, in Bailey's Industrial Oil and Fat Products, F. Shahidi, (Ed.), pp. 279-306, Vol. 6, (2005).
120. G.W. Borden, O.W. Smith, and D.J. Trecker, Acrylated epoxidized soybean oil urethane derivatives, US Patent 4,025,477, assigned to Union Carbide Corporation (May 24, 1977 ).
121. Y. Lu and R.C. Larock, New hybrid latexes from a soybean oil-based waterborne polyurethane and acrylics via emulsion polymerization. Biomacromolecules 8, 3108-3114 (2007).
122. S.N. Khot, J.J. La Scala, E. Can, S.S. Morye, G.I. Williams, G.R. Palmese, S.H. Kusefoglu, and R.P. Wool, Development and application of triglyceridebased polymers and composites. J. Appl. Polym. Sci. 82(3), 703-723 (2001).
123. Q. Luo, M. Liu, Y.F. Xu, M. Ionescu, and Z.S. Petrovic, Thermosetting allyl resins derived from soybean oil. Macromolecules 44, 7149-7157 (2011).
124. Q. Luo, M. Liu, Y.F. Xu, M. Ionescu, and Z.S. Petrovic, Thermosetting allyl resins derived from soybean fatty acids. J. Appl. Polym. Sci. 127(1), 432-438 (2012).
125. M. Ionescu, Chemistry and Technology of Polyols for Polyurethanes, Rapra Technology, Ltd., Shawbury, Shrewsburty, Shropshire, UK (2005).
126. R. Hoefer, P. Daute, R. Grutzmacher, and A. Westfechtel, Oleochemical polyols -A new raw material source for polyurethane coatings and floorings. J. Coat. Technol. 69(869), 65-72 (1997).
127. M. Desroches, M. Escouvois, R. Auvergne, S. Caillol, and B. Boutevin, From vegetable oils to polyurethanes: Synthetic routes to polyols and main industrial products. Polym. Rev. 52(1), 38-79 (2012).
128. R. Franke, D. Selent, and A. Bö rner, Applied hydroformylation. Chem. Rev. 112, 5675-5732 (2012).
129. V.Y. Gankin and G.S. Gurevich, Chemical technology of oxosynthesis, http://itchem.com/d/216737/d/chemical-technology-of-oxosyntheisi.pdf.
130. P.W.N.M. Van Leeuwen and C. Claver, (Eds.), Rhodium Catalyzed Hydroformylation, Kluwer Academic Publishers, Dordrecht, Netherlands (2000).
131. F.P. Pruchnik, Organometallic Chemistry of Transition Elements, Plenum Press, New York (1990).
132. A. Guo, D. Demydov, W. Zhang, and Z.S. Petrovic, Polyols and polyurethanes from hydroformylation of soybean oil. J. Polym. Environ. 10(1/2), 49-52 (2002).
133. K. Bruns, T. Gerke, H. Bahrmann, P. Heymanns, and J. Weber, Process for the preparation of an odorant, EP Patent 0477,747 A1, assigned to HOECHST AG ( February 9, 1994).
134. L. Dulog, Linseed oil and raw materials for use in organic coatings and floor coverings. Schriftenr. Bundesminist. Ernaehr. Landwirtsch. Forsten Reihe A Angew. Wiss. 391, 27-37 (1990).
135. E.N. Frankel and F.L. Thomas, Selective Hydroformylation of Polyunsaturated Fats with a Rh-PPh3 Catalyst. J. Am. Oil Chem. Soc. 49, 10-14 (1972).
136. P. Kandanarachchi, A. Guo, D. Demydov, and Z. Petrovic, The kinetics of the hydroformylation of soybean oil by ligand modified homogeneous rhodium catalysis. J. Oil Chem.Soc. 79, 1221-1225 (2002).
137. Z. Lysenko, D.L. Morrison, D.A. Babb, D.L. Bunning, C.W. Derstine, J.H. Gilchrist, H.R. Jouett, K.D. Olson, W.-J. Peng, J.D. Phillips, B.M. Roesch, A.W. Sanders, A.K. Schrock, P.J. Thomas, and J.S. Kanel, Aldehyde compositions derived from seed oils, US Patent Appl.20100298610 A1, assigned to The Dow Chemical Company.
138. C.K. Lyon, V.H. Garrett, and E.N. Frankel, Rigid urethane foams from hydroxymethylated castor oil, safflower oil, oleic safflower oil, and polyol esters of castor acids. J. Am. Oil Chem. Soc. 51, 331-334 (1974).
139. R.A. Awl, E.N. Frankel, and E.H. Pryde, Hydroformylation with recycled rhodium catalyst and one-step esterification-acetalation: A process for methyl 9(10)-methoxy-methylenestearate from oleic acid. J. Am. Oil Chem. Soc. 53(5), 190-195 (1976).
140. R.A. Awl and E.H. Pryde, Diacetal derivatives of polyunsaturated fatty esters as primary plasticizers for polyvinylchloride, US Patent 3,983,067, assigned to The United Sates of America as represented by the Secretary of (September 28, 1976).
141. A. Bonfand, E. Ucciani, A. Luciani, and E. Sambuc, Hydroformylation of fatty-acid vinyl esters. Rev. Fr. Corps. Gras. 37(9-10), 281-287 (1990).
142. E.J. Dufek and E.N. Frankel, Some esters of Mono-, Di-, and Tricarboxystearic acid as plasticizers: Preparation and evaluation. J. Am. Oil Chem. Soc. 53(5), 198-203 (1976).
143. E.N. Frankel, Methyl 9(10)-formylstearate by selective hydroformylation of oleic oil. J. Am. Oil Chem. Soc. 48, 248-253 (1971).
144. E.N. Frankel, Selective hydroformylation of unsaturated fatty acid esters. Ann. NY Acad. Sci. 214, 79-93 (1973).
145. E.N. Frankel, S. Metlin, W.K. Rohwedder, and I. Wender, Hydroformylation of unsaturated fatty esters. J. Am. Oil Chem. Soc. 46, 133-138 (1969).
146. E.N. Frankel, Catalytic hydroformylation of unsaturated fatty derivatives with cobalt carbonyl. J. Am. Oil Chem. Soc. 53(4), 138-141 (1976).
147. J.P. Friedrich, Hydroformylation of methyl oleate with a recycled rhodium catalyst and estimated costs for a batch process. J. Am. Oil Chem. Soc. 50(11), 455-458 (1973).
148. J.P. Friedrich, Low-pressure hydroformylation of methyl oleate with an activated rhodium catalyst. Ind. Eng. Chem. Prod. Res. Dev. 17(3), 205-207 (1978).
149. E.H. Pride, Hydroformylation of unsaturated fatty acids. J. Am. Oil Chem. Soc. 61(2), 419-425 (1984).
150. E.H. Pride, E.N. Frankel, and J.C. Cowan, Reactions of carbon monoxide with unsaturated fatty acids and derivatives: A review. J. Am. Oil Chem. Soc. 49, 451-456 (1972).
151. A. Guo, W. Zhang, and Z.S. Petrovic, Structure-property relationships in polyurethanes derived from soybean oil. J. Mater. Sci. 41(15), 4914-4920 (2006).
152. Z.S. Petrovic, Polyurethanes, in Handbook of Polymer Synthesis, H.R. Kriecheldorf, O. Nuyken, and G. Swift,(Eds.), pp. 503-540. Marcel Dekker, Inc., New York (2005).
153. J.H. Saunders and K.C. Frisch, Polyurethanes, Chemistry and Technology, Part I Chemistry, Krieger Publishing Co., Malabar, FL (1983).
154. J.H. Saunders and K.C. Frisch, Polyurethanes: Chemistry and Technology, Part II, Interscience Publishers, New York (1964).
155. G. Oertel, (Ed.), Polyurethane Handbook, 2nd Edn., Hanser, New York (1994).
156. L. Hojabri, X. Kong, and S.S. Narine, Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: Synthesis, polymerization, and characterization. Biomacromolecules 10(4), 884-891 (2009).
157. G. Çayli and S. Küsefoʇlu, Biobased polyisocyanates from plant oil triglycerides: Synthesis, polymerization, and characterization. J. Appl. Polym. Sci. 109(5), 2948-2955 (2008).
158. G. Çayli and S. Küsefoʇlu, Isothiocyanate derivatives of soybean oil triglycerides: Synthesis, characterization, and polymerization with polyols and polyamines. J. Appl. Polym. Sci. 116(1), 125-131 (2010).
159. T.W. Abraham, Advances in the Use of BiOH® Polyols in Polyurethanes Chapter 11, in Biobased Monomers, Polymers, and Materials, P.B. Smith and R.A. Gross, (Eds.), pp. 165-181. American Chemical Society, (2012).
160. M. Galia, L.M. De Espinosa, J.C. Ronda, and G. Lligadas, Vegetable oil-based thermosetting polymers. Eur. J. Lipid Sci. Technol. 112(1), 87-96 (2010).
161. G. Lligadas, J.C. Ronda, M. Galià, and V. Cádiz, Plant oils as platform chemicals for polyurethane synthesis: Current state-of-The-art. Biomacromolecules 11, 2825-2835 (2010).
162. L. Thiele, L. Zander, J. Klein, B. Beuer, N. Knips, and P. Doebrich, Preparation of transesterification polyols for polyurethane-prepolymers with specifically regulated viscosity. Germany Patent DE 19947563, assigned to Henkel K.-G.a.A., (April 19, 2001).
163. M. Ionescu, Y. Ji, W.M. Shirley, and Z.S. Petrovic, Polyurethanes from Hybrid Vegetable Oil/Petrochemical Polyester Polyols, in Renewable and Sustainable Polymers, G.F. Payne and P.B. Smith, (Eds.), pp. 73-93, Vol. 1063, ACS symposium series, Washington, DC (2011).
164. Z.S. Petrovic, I. Javni, X. Jing, D.P. Hong, and A. Guo, Effect of hyperbranched vegetable oil polyols on properties of flexible polyurethane foams. Mat. Sci. Forum 555, 459-466 (2007).
165. Z.S. Petrovic, I. Cvetkovic, J. Milic, D. Hong, and I. Javni, Hyperbranched polyols from hydroformylated methyl soyate. J. Appl. Polym. Sci. 125(4), 2920-2928 (2012).
166. Z.S. Petrovic, I. Cvetkovic, D. Hong, X. Wan, W. Zhang, T. Abraham, and J. Malsam, Polyester polyols and polyurethanes from ricinoleic acid. J. Appl. Polym. Sci. 108(2), 1184-1190 (2008).
167. J. Milic, I. Teraoka, and Z.S. Petrovic, Solution properties of bio-based hyperbranched polyols investigated by multiple detection size exclusion chromatography. J. Appl. Polym. Sci. 125(S2), E586-E594 (2012).
168. E.J. Dufek and G.R. List, Recovery of solubilized rhodium from hydroformylated vegetable-oils and their methyl-esters. J. Am. Oil Chem. Soc. 54(7), 276-278 (1977).
169. E.N. Frankel, Selective hydroformylation of unsaturated fatty compounds, US Patent 3,787,459, assigned to United States of America as represented by the secretary of Agriculture (January 22, 1974).
170. E.N. Frankel, F.L. Thomas, and W.L. Rohwedder, Hydroformylation of methyl linoleate and linolenate with rhodium-triphenylphosphine catalyst. Ind. Eng. Chem. Prod. Res. Dev. 12 (1), 47-53 (1973).
171. P. Kandanarachchi, A. Guo, and Z. Petrovic, Hydroformulation of vegetable oils and model compounds by ligand modified rhodium catalysis. J. Mol. Catal. A 184(1-2), 65-71 (2002).
172. W.-J. Peng, D.A. Babb, A.W. Sanders, C.W. Derstine, J. Jimenez, Z. Lysenko, K.D. Olson, J.D. Phillips, B.M. Roesch, and A.K. Schrock, Aldehyde and alcohol compositions derived from seed oils, US Patent Appl.20100048753 A1, assigned to Dow Global Technologies Inc.
173. R.A. Awl and E.H. Pryde., Reduction of methyl oleate ozonolysis products to aldehydes with activated Zn. J. Am. Oil Chem. Soc. 43, 35-37 (1966).
174. H. Eierdanz and F. Hirsinger, New raw materials for oleochemical reactions. Fett Wissenschaft Technologie 92(12), 463-467 (1990).
175. I. Cvetkovic, J. Milic, M. Ionescu, and Z.S. Petrovic, Preparation of 9-hydroxynonanoic acid methyl ester by ozonolysis of vegetable oils and its polycondensation. Hem. Ind. 62(6), 319-328 (2008).
176. Z.S. Petrovic, W. Zhang, and I. Javni, Structure and properties of polyurethanes prepared from triglyceride polyols by ozonolysis. Biomacromolecules 6(2), 713-719 (2005).
177. D. Graiver and R. Narayan, Value-added chemicals from catalytic ozonation of vegetable oils. Lipid Tech. 17(2), 31 (2006).
178. D. Graiver, P. Tran, P. Laura, K.W. Farminer, and R. Narayan, Modifications of soybean oil using novel ozone-based chemistry, in Degradable Polymers and Materials. Principles and Practice, K. Khemani and C. Scholz, pp. 76, Oxford Univ. Press, New York, USA (2005).
179. Z.S. Petrovic, J. Milic, Y. Xu, and I. Cvetkovic, A chemical route to high molecular weight vegetable oil-based polyhydroxyalkanoate. Macromolecules 43(9), 4120-4125 (2010).
180. P. Daute, R. Gruetzmacher, R. Hoefer, and A. Westfechtel, Saponification resistant polyols for polyurethane applications based on oleochemical raw materials. Fett Wissenschaft Technologie 95(3), 91-94 (1993).
181. T.A. Foglia, P.A. Barr, A.J. Malloy, and M.J. Costazo, Oxidation of unsaturated fatty acids with ruthenium and osmium tetroxide. J. Am. Oil Chem. Soc. 54, 870A (1977).
182. W.P. Griffith, Osmium tetroxide and its applications. Platinum Metals Rev. 18(3), 94-96 (1974).
183. B. Borhan, B.R. Travis, and J.M. Schomaker, Catalytic osmium assisted oxidative cleavage of olefins, US Patent 6,787,671 B2, assigned to Board of Trustees of Michigan State Univ. (September 7, 2004).
184. P. Knaub and Y. Camberlin, Castor oil as a way to fastcured polyurethane ureas. Eur.Polym.J. 22(8), 633-635 (1986).
185. H. Mutlu and M.A.R. Meier, Castor oil as a renewable resource for the chemical industry. Eur. J. Lipid Sci. Technol. 112, 10-30 (2010).
186. Z. Petrovic and D. Fajnik, Preparation and properties of castor oil based polyurethanes. J. Appl. Polym. Sci. 29, 1031-1040 (1984).
187. S.K. Menon and S.R. Srinivasan, Polyurethane coatings from castor oil. Paintindia 34(6), 7-12 (1984).
188. Z.S. Petrovic, I. Javni, and A. Guo, Electroinsulating Polyurethane Casting Resins Based on Soy Oil and Castor Oil, in Polyurethanes EXPO'98, pp. 559-562. SPI, Polyurethane Division, Dallas, TX (1998).
189. C.K. Lyon and V.H. Garrett, New castor oil-based urethane elastomers. J. Am. Oil Chem. Soc. 50, 112 (1973).
190. G.C. Toone and G.S. Wooster, Diisocyanate coatings based on castor oil. Ind. Eng. Chem. Prod. Res. Dev. 51(11), 1384-1385 (1959).
191. P.K. Saxena, S.R. Srinivasan, J. Hrouz, and M. Ilavsky, The effect of castor-oil on the structure and properties of polyurethane elastomers. J. Appl. Polym. Sci. 44(8), 1343-1347 (1992).
192. V. Sharma and P.P. Kundu, Addition polymers from natural oils-A review. Prog. Polym. Sci. 31(11), 983-1008 (2006).
193. S.A. Baser and D.V. Khakhar, Castor oil-glycerol blends as polyols for rigid polyurethane foams. Cell. Polym. 12(5), 390-401 (1993).
194. C. Azuma, C.G. Mothe, L. Stejko, and L.L.Y. Visconte, Photosensitive polyurethanes based on castor oil. Polym. Bull. (Berlin) 34(5-6), 663-668 (1995).
195. E.M. Abdel-Bary, B.M. Badran, and N.A. Ghanem, The modification of epoxidized oils with amines. I. The modification of epoxidized dehydrated castor oil with diamines. Eur. Polym. J. 11(5/6), 399-402 (1975).
196. N.D. Ghatge and V.B. Phadke, Elastomers from castor oil. J. Appl. Polym. Sci. 11, 629-638 (1967).
197. N.D. Ghatge and R.A.N. Murthy, Polythiourethane polymers using castor oil tristhioglycolate as crosslinking agent. J. Appl. Polym. Sci. 27(5), 1557-1563 (1982).
198. Q. Guo, S. Fan, and Q. Zhang, Polyurethanes from 2,4-toluene diisocyanate and a mixture of castor oil and hydroxyether of bisphenol-A. Eur. Polym. J. 26(11), 1177-1180 (1990).
199. T.F. Kroplinski, Polyurethane Casting Compounds Based on Castor Oil, in SPE 33rd Annu. Tech. Conf. (ANTEC), pp. 242-245. Atlanta, GA, (1975).
200. Z.S. Petrovic and J. Ferguson, Polyurethane elastomers. Prog. Polym. Sci. 16, 695-836 (1991).
201. Z.S. Petrovic, Y. Xu, and W. Zhang, Segmented polyurethanes from vegetable oil-based polyols. Polym. Preprints 48, 852-853 (2007).
202. Y. Xu, Z.S. Petrovic, S. Das, and G.L. Wilkes, Morphology and properties of thermoplastic polyurethanes with dangling chains in ricinoleate-based soft segments. Polymer 49, 4248-4538 (2008).
203. Z.S. Petrovic, D. Hong, I. Javni, N. Erina, F. Zhang, and J. Ilavsky, Phase structure in segmented polyurethanes having fatty acid-based soft segments. Polymer 54, 372-380 (2013).
204. O.S. Yemul and Z.S. Petrovic, Novel Thermoplastic Polyurethane Elastomers based on Methyl-12-Hydroxy Stearate, in Chapter 2 in Contemporary Science of Polymeric Materials, L. Korugic-Karasz, (Ed.), pp. 29-39, Vol. 1061, ACS symposium series, (2010).
205. G. Liu, X. Kong, H. Wan, and S.S. Narine, Production of 9-hydroxynonanoic acid from methyl oleate and conversion into lactone monomers for the synthesis of biodegradable polylactones. Biomacromolecules 9, 949-953 (2008).
206. V.M. Mannari, Y. Guo, Z. Chen, and J.L. Massingill Jr, Epoxy acid phosphate esters -dispersibility and salt fog resistance, Proceedings of the International Waterborne, High Solids, and Powder Coatings Symposium 30th, pp. 415-421 (2003).
207. Z.S. Petrovic and I. Cvetkovic, Vegetable oil-based hyperbranched polyols in flexible foams. Contemporary Materials III-1, 63-71 (2012).
208. M. Ionescu, Z. Petrovic, and X. Wan, Ethoxylated soybean polyols for polyurethanes. J. Polym. Environ. 18, 1-7 (2010).
209. M. Ionescu, Z.S. Petrovic, I. Javni, and J. Stojadinov, Vegetable oils based polyols for flexible polyurethane foams, Presented at the Polyurethanes 2005 Technical Conference and Fair, Houston, (October 17-19 2005) (unpublished).
210. S. Bauer, R. Ruppel, E. Baum, and J. Winkler, Method for the production of low-emission polyurethane soft foams, US Patent Appl.2006/0167125 A1, assigned to BASF AG (July 27, 2006).
211. K. Lorenz, Process for the production of polyols based on natural oils, US Patent Appl.2007/0123725 A1, assigned to Bayer Material Science AG (May 31, 2007).
212. H.E. Hoydonckx, D.E.D. Vos, S.A. Chavan, and P.A. Jacobs, Esterification and transesterification of renewable chemicals. Top. Catalysis 27(1-4), 83-96 (2004).
213. G. Jackson, A process for manufacturing monoesters of polyhydric alcohols, EP Patent Appl.1260497, assigned to Infineum International Limited, UK (November 27, 2002).
214. M. Desroches, S. Caillol, R. Auvergne, and B. Boutevin, Synthesis of pseudo-telechelic diols by transesterification and thiol-ene coupling. Eur. J. Lipid Sci. Technol. 114, 84-91 (2012).
215. E. Uoskainen, Y.-Y. Linko, M. Lamsa, and T. Tervakkangas, Transesterification of trimethylol propane and rapeseed oil methyl ester to environmentally acceptable lubricants. J. Amer. Oil Chem. Soc. 75, 1557-1563 (1998).
216. A. Westfechtel and W. Giede, Method for producing polyolesters, Germany Patent EP 1075460, DE 19819656, assigned to Henkel K.-G.a.A., Germany (February 14, 2001).
217. L. Dandik and H.A. Aksoy, Applications of Nigella sativa seed lipase in oleochemical reactions. Enzyme Microb. Technol. 19(4), 277-281 (1996).
218. D.G. Hayes, The catalytic activity of lipases toward hydroxy fatty acids. J. Am. Oil Chem. Soc. 73(5), 543-549 (1996).
219. R.A. Gross, A. Kumar, and B. Kalra, In-vitro enzyme catalyzed polymer synthesis. Chem. Rev. 101(7), 2097-2124 (2001).
220. T. Iwata, S. Kusaka, and Y. Doi, Microbial Synthesis, Physical properties and Biodegradability of Ultre-High-Molecular-Weight Poly[(R)-3-hydroxybutyrate], in Polymers from Renewable Resources-Biopolyesters and Biocatalysis, C. Scholz and R.A. Gross, (Eds.), pp. 67-76. ACS, Washington, (2000).
221. S. Miao, S. Zhang, Z. Su, and P. Wang, Chemoenzymatic synthesis of oleic acid-based polyesters for use as highly stable biomaterials. J. Polym. Sci. Part A Polym. Chem. 46(12), 4243-4248 (2008).
222. U. Schuchardt, R. Sercheli, and R.M. Vargas, Transesterification of vegetable oils: A review. J. Bras. Chem. Soc. 9(3), 199-210 (1998).
223. T.A. Isbell, H.B. Frykman, T.P. Abbott, J.E. Lohr, and J. Drozd, Optimization of the sulfuric acid-catalyzed estolide synthesisfrom oleic acid. J. Am. Oil Chem. Soc. 74, 473-476 (1997).
224. T.A. Isbell and R. Kleiman, Characterization of estolides produced from the acid-catalyzed condensation of oleic acid. J. Am. Oil Chem. Soc. 71 (4), 379-383 (1994).
225. T.A. Isbell and R. Kleiman, Mineral acid-catalyzed condensation of meadowfoam fatty acids into estolides. J. Am. Oil Chem. Soc. 73, 1097-1107 (1996).
226. R.D. Plattner, K. Payne-Wahl, L.W. Tjarks, and R. Kleiman, Hydroxy acids and estolide triglycerides of heliophila amplexicaulis L.f. seed oil. Lipids 14, 576-579 (1979).
227. K. Payne-Wahl and R. Kleiman, Quantitation of estolide triglycerides in sapium seeds by high-performance liquid chromatography with infrared detection. J. Am. Oil Chem. Soc. 60, 1011-1012 (1983).
228. S.C. Cermak and T.A. Isbell, Synthesis of estolides from oleic and saturated fatty acids. J. Am. Oil Chem. Soc. 78, 557-565 (2001).
229. S.M. Erhan, R. Kleiman, and T.A. Isbell, Estolides from meadowfoam oil fatty acids and other monounsaturated fatty acids. J. Am. Oil Chem. Soc. 70, 461-465 (1993).
230. S.C. Cermak and T.A. Isbell, Synthesis and physical properties of mono-estolides with varying chain lengths. Ind. Crops Prod. 29(1), 205-213 (2009).
231. S.C. Cermak and T.A. Isbell, Physical properties of saturated estolides and their 2-ethylhexyl esters. Ind. Crops Prod. 16(2), 119-127 (2002).
232. M. Peláez, C. Orellana, A. Marqués, M. Busquets, A. Guerrero, and A. Manresa, Natural estolides produced by pseudomonas sp. 42A2 grown on oleic acid: Production and characterization. J. Am. Oil Chem. Soc. 80(9), 859-866 (2003).
233. A. Bódalo, J. Bastida, M.F. Máximo, M.C. Montiel, M.D. Murcia, and S. Ortega, Influence of the operating conditions on lipase-catalysed synthesis of ricinoleic acid estolides in solvent-free systems. Biochem. Eng. J. 44(2-3), 214-219 (2009).
234. Y. Yoshida, M. Kawase, C. Yamaguchi, and T. Yamane, Enzymatic synthesis of estolides by a bioreactor. J. Am. Oil Chem. Soc. 74(3), 261-267 (1997).
235. J. Bódalo, M. Bastida, F.C. Máximo, M. Montiel, and M.D. Murcia, Enzymatic biosynthesis of ricinoleic acid estolides. Biochem. Eng. J. 26(2-3), 155-158 (2005).
236. T.A. Isbell, R. Kleiman, and B.A. Plattner, Acid-catalyzed condensation of oleic acid into estolides and polyestolides. J. Am. Oil Chem. Soc. 71, 169-174 (1994).
237. C. Cermak, G. Biresaw, and T.A. Isbell, Comparison of a new estolide oxidative stability package. J. Am. Chem. Soc. 85(9), 879-885 (2008).
238. I. Shepherd and J.S. Showell, The mechanism of the aqueous perchloric acid isomerization of oleic acid to ã-stearolactone. J. Am. Oil Chem. Soc. 46(9), 479-481 (1969).
239. S. Cermak and T.A. Isbell, Synthesis of ä-stearolactone from oleic acid. J. Am. Oil Chem. Soc. 77, 243-248 (2000).
240. H.B. Frykman, T. Isbell, and S.C. Cermak, 5-Hydroxy fatty acid amides from ä-lactones and alkyl glucamines. J. Surfact. Deterg. 3(2), 179-183 (2000).
241. I. Badou and S. Dirlikov, Low VOC fast air-drying alkyd coatings.II. allylic reactive diluents. Abstr. Pap. Am. Chem. Soc. 207, 178-PMSE (1994).
242. T. Domide and M. Rosetti, About the usage of polyhydroxyl oligomers in the synthesis of alkyd resins by transesterification with triglycerides, in FATIPEC Congress, pp. 193-211, Vol. 17, Lugano, (1984).
243. C.P. Kuo, Z. Chen, N. Lathia, and S. Dirlikov, Low VOC fast air-drying alkyd coatings.I. (Meth)Acrylic reactive diluents. Abstr. Pap. Am. Chem. Soc. 207, 33-PMSE (1994).
244. H.C. Wilk, A. Meffert, H. Fischer, and B. Wegemund, Alkyd resins containing ring-opening products of epoxidized fatty alcohols or fatty acid derivatives as hydroxyl compounds, Germany Patent DE 3,246,618 A1, assigned to Henkel K.-G.a.A., Fed. Rep. Ger. (DE December 16).
245. A. Meffert and H. Kluth, Process for the preparation of modified triglycerides, US Patent 4,886,893, assigned to Henkel Corp. (December 12, 1989).
246. P. Muturi-Mwangi, S. Dirlikov, and P.M. Gitu, Vernonia and epoxidized linseed and soybean oils as low yellowing diluents in alkyd coatings. Pigment Resin Technol. 23(3), 3-7 (1994).
247. M.V.R. Mohan Rao and M. Yaseen, Solution parameters of linseed oil alkyd: Their dependence on solutesolvent interactions. J. Coat. Technol. 58(743), 49-56 (1986).
248. J.H. Clements, Reactive applications of cyclic alkylene carbonates, in Huntsman Technical Paper, pp. 1-12, (2002).
249. B. Schaffner, F. Schaffner, S.P. Verevkin, and A. Borner, Organic carbonates as solvents in synthesis and catalysis. Chem. Rev. 110, 4554-4581 (2010).
250. G. Fisicaro and G. Gerbaz, Dialkylcarbonates, in Synthetic Lubricants and High-Performance Functional Fluids, R.L. Shubkin, (Ed.), pp. 229-239. Marcel Dekker, New York (1993).
251. S. Gryglewicz, F.A. Oko, and G. Gryglewicz, Synthesis of modern synthetic oils based on dialkyl carbonates. Ind. Eng. Chem. Res. 42, 5007-5010 (2003).
252. A. Westfechtel, F. Bongardt, and A. Ansmann, Guerbet Carbonates, US Patent 5,387,374, assigned to Henkel Kommanditgesellschaft auf Aktien (February 7, 1995).
253. A. Ansmann, U. Issberner, S. Bruening, B. Jackwerth, and D. Hoffmann, Wax-Based Compositions WO Patent Appl.2003005981 assigned to COGNIS Deutschland GMBH.
254. S.L. Giolito, J.C. Goswami, and E. Weil, Carbonate Esters, Carbonate Ester Compositions, and Plasticized Compositions, US Patent 4,403,056 assigned to Stauffer Chemical Company (September 6, 1983).
255. N.-S. Roh, B.C. Dunn, E.M. Eyring, R.J. Pugmire, and H.L.C. Meuzelaar, Production of diethyl carbonate from ethanol and carbon monoxide over a heterogeneous catalytic flow reactor. Fuel Process Technol. 83, 27-38 (2003).
256. D. Delledonne, F. Rivetti, and U. Romano, Developments in the production and application of dimethylcarbonate. Appl. Cat. A Gen. 221, 241-251 (2001).
257. J.A. Kenar, Current perspectives on oleochemical carbonates. Inform 15, 580-582 (2004).
258. J.A. Kenar, G. Knothe, and A.L. Copes, Synthesis and characterization of dialkyl carbonates prepared from mid-, long-chain, and guerbet alcohols. J. Am. Oil Chem. Soc. 81, 285-291 (2004).
259. J.A. Kenar, G. Knothe, R.O. Dunn, T.W.I. Ryan, and A. Matheaus, Physical properties of oleochemical carbonates. J. Am. Oil Chem. Soc. 82, 201-205 (2005).
260. P.G. Parzuchowski, M. Kizlinska, and G. Rokicki, New hyperbranched polyether containing cyclic carbonate groups as a toughening agent for epoxy resin. Polymer 48, 1857-1865 (2007).
261. A.A.G. Shaikh and S. Sivaram, Dialkyl and diaryl carbonates by carbonate interchange reaction with dimethyl carbonate. Ind. Eng. Chem. Res. 31(4), 1167-1170 (1992).
262. R. Eckelt, M.J.G. Fait, R. Fricke, and M. Richter, Catalyst for the synthesis of dimethyl carbonate in the gas phase, US Patent Appl.20080249327, assigned to.
263. H. Matsuda, S. Oda, and M. Ohno, Catalyst and method for producing carbonic diesters, US Patent 5,907,051, assigned to Daicel Chemical Industries, Ltd. (May 25, 1999).
264. J.A. Kenar and I.D. Tevis, Convenient preparation of fatty ester cyclic carbonates. Eur. J. Lipid Sci. Technol. 107, 135-137 (2005).
265. C. Venturello and R. D'Aloisio, Process for the manufacture of alkylene carbonates, US Patent 4226778, assigned to Montedison S.p.A. (October 7, 1980).
266. M. Lichtenwalter and J. Cooper, Catalytic process for producing alkylene carbonates, US Patent 2,773,070, assigned to Jefferson Chemical Co. (December 4, 1956).
267. P. McClellan, Catalytic process for producing alkylene carbonates, US Patent 2,873,282, assigned to Jefferson Chemical Co. (February 10, 1959).
268. B. Tamami, S. Sohn, G.L. Wilkes, and B. Tamami, Incorporation of carbon dioxide into soybean oil and subsequent preparation and studies of nonisocyanate polyurethane networks. J. Appl. Polym. Sci. 92, 883-891 (2004).
269. G.L. Wilkes, S. Sohn, and B. Tamami, Nonisocyanate polyurethane materials, and their preparation from epoxidized soybean oils and related epoxidized vegetable oils, incorporation of carbon dioxide into soybean oil, and carbonation of vegetable oils, US Patent 7,045,577 B2, assigned to Virginia Tech Intell Properties, Inc. (May 16, 2006).
270. I. Javni, D.-P. Hong, and Z.S. Petrovic, Soy-based polyurethanes by non-isocyanate route. J. Appl. Polym. Sci. 108, 3876-3875 (2008).
271. Z.R. Li, Y.H. Zhao, S.R. Yan, X.K. Wang, M.Q. Kang, J.W. Wang, and H.W. Xiang, Catalytic synthesis of carbonated soybean oil. Catal. Lett. 123, 246-251 (2008).
272. K.M. Doll and S. Erhan, Improved synthesis of carbonated soybean oil in supercritical carbon dioxide, Presented at the 229th American Chemical Society National Meeting San Diego, CA, (2005) (unpublished).
273. K.M. Doll and S.Z. Erhan, The improved synthesis of carbonated soybean oil using supercritical carbon dioxide at a reduced reaction time. Green Chem. 7, 849-854 (2005).
274. J.-Q. Wang, Xiao-Dong Yue, F. Cai, and L.-N. He, Solventless synthesis of cyclic carbonates from carbon dioxide and epoxides catalyzed by silica-supported ionic liquids under supercritical conditions. Catal. Commun. 8, 167-172 (2007).
275. J. Sun, S.-i. Fujita, and M. Arai, Development in the green synthesis of cyclic carbonate from carbon dioxide using ionic liquids. J. Organomet. Chem. 690(15), 3490-3497 (2005).
276. D. Pioch, P. Lozano, and J. Graille, First lipasecatalyzed synthesis of fatty carbonate esters. Biotechnol. Lett. 13(9), 633-636 (1991).
277. M. Poza, R. Pulido, and V. Gotor, Vinyl carbonates as novel alkoxycarbonylation reagents in enzymatic synthesis of carbonates. Tetrahedron 48, 6477-6484 (1992).
278. H. Nava, Hydroxyalklylation of phenols, US Patent 5,679,871 assigned to Reichhold Chemicals, Inc. (October 21, 1997).
279. H. Dressler, Hydroxyalkylation of phenols or thiophenols with cyclic organic carbonates using triorganophosphine catalysts, US Patent 5,059,723, assigned to Indspec Chemical Corporation (October 22, 1991).
280. R. Srinistava, D. Srinivas, and P. Ratnaswami, Zeolitebased organic-inorganic hybrid catalysts for phosgene free and solvent free synthesis of cyclic carbonates and carbamates at mild conditions utilizing CO2. Appl. Catalysis A Gen. 289, 128-134 (2005).
281. J. Knifton, Process for cogeneration of ethylene glycol and dimethyl carbonate, US Patent 5,214,182 assigned to Texaco Chemical Company (May 25, 1993).
282. M. Sankar, N. Madhavan, M.C. , K.V.G.K. Murty, and P. Manikandan, Transesterification of cyclic carbonates with methanol at ambient conditions over tungstatebased solid catalysts. Appl. Catalysis A Gen. 312, 108-114 (2006).
283. S. Funakoshi and K. Kenzou, Process for producing polycarbonate having terminal hydroxyl groups, US Patent 5,703,196, assigned to Asahi Kasei Kogyo Kabushiki Kaisha (December 30, 1997 ).
284. J. Malkemus, Hydroxy carbamates and the process of producing the same, US Patent 2,627,524, assigned to Jefferson Chemical Co. (February 3, 1953).
285. G. Rokicki and A. Piotrowska, A new route to polyurethanes from ethylene carbonate, diamines and diols. Polymer 43, 2927-2935 (2002).
286. O.L. Figovsky and L.D. Shapovalov, Features of reaction amino-cyclocarbonate for production of new type nonisocyanate polyurethane coatings. Macromol. Symp. 187, 325-332 (2002).
287. L. Ubaghs, M. Waringo, H. Keul, and H. Hocker, Copolymers and terpolymers of Tetramethylene Urea, ã-Butyrolactone, and Ethylene carbonate or 1,2-propylene carbonate. Macromolecules 37, 6755-6762 (2004).
288. M.-R. Kim, H.-S. Kim, C.-S. Ha, D.-W. Park, and J.-K. Lee, Syntheses and thermal properties of poly(hydroxy)urethanes by polyaddition reaction of bis(cyclic carbonate) and diamines. J. Appl. Polym. Sci. 81, 2735-2743 (2001).
289. A. Steblyanko, W. Choi, F. Sanda, and T. Endo, Addition of five-membered cyclic carbonate with amine and its application to polymer synthesis. J. Polym. Sci. Part A Polym. Chem. 38, 2375-2380 (2000).
290. I. Javni, D. Hong, and Z.S. Petrovic, Polyurethanes from soybean oil, aromatic and cycloaliphatic diamines by non-isocyanate route. J. Appl. Polym. Sci. 128(1), 566-571 (2013).
291. M. Bähr and R. Mülhaupt, Linseed and soybean oilbased polyurethanes prepared via the non-isocyanate route and catalytic carbon dioxide conversion. Green Chem. 14, 483-489 (2012).
292. M. Bähr, A. Bitto, and R. Mulhaupt, Cyclic limonene dicarbonate as a new monomer for non-isocyanate oligo-and polyurethanes (NIPU) based upon terpenes. Green Chem. 14, 1447-1454 (2012).
293. R. Criegee, Mechanism of ozonolysis. Angew. Chem. Int. Ed. Engl. 14(11), 745-752 (1975).
294. C.E. Schiaffo and P.H. Dussault, Ozonolysis in solvent/water mixtures: Direct conversion of alkenes to aldehydes and ketones. J. Org. Chem. 73, 4688-4690 (2008).
295. P. Tran, D. Graiver, and R. Narayan, Ozone-mediated polyol synthesis from soybean oil. JAOCS 82(9), 653-659 (2005).
296. W.R. Miller, E.H. Pryde, R.A. Awl, W.L. Kohlhase, and D.J. Moore, Nylon-9 Via 9-aminononanoic acid from soybean oil. I&EC Prod. Res. Dev. 10, 442-447 (1971).
297. T. Eren and S.H. Küsefoglu, Synthesis and polymerization of the bromoacrylated plant oil triglycerides to rigid, flame retardant polymers. J. Appl. Polym. Sci. 91, 2700-2710 (2004).
298. M. Rossert and R. Dhein, Process for preparing maleinized oils, US Patent 4,340,688, assigned to Bayer (July 20, 1982).
299. H. Warth, R. Muelhaupt, B. Hoffmann, and S. Lawson, Polyester networks based upon epoxidized and maleinated natural oils. Angew.Makromol.Chem. 249, 79-92 (1997).
300. R.P. Wool and X.S. Sun, Bio-Based Polymers And Composites, Elsevier Academic Press, Burlington, MA (2005).
301. R. Wool, S. Kusefoglu, G. Palmese, S. Khot, and R. Zhao., High modulus polymers and composites from plant oils, US Patent 6,121,398, assigned to University of Delaware (September 19, 2000).
302. Y. Lu and R. Larock, Novel polymeric materials from vegetable oils and vinyl monomers: Preparation, properties, and applications. ChemSusChem 2(2), 136-147 (2009).
303. H. Pelletier, N. Belgacem, and A. Gandini, Acrylated vegetable oils as photocrosslinkable materials. J. Appl. Polym. Sci. 99, 3218-3221 (2006).
304. R. Vaidya, G. Chaudhary, N. Raut, G. Shinde, and N. Deshmukh, Synthesis of Biocomposites from Natural Oils-A Review, in 2012 International Conference on Environmental, Biomedical and Biotechnology IPCBEE, IACSIT Press, Singapore, pp. 55-60, Vol. 41, (2012).
305. J. Lu and R.P. Wool, Sheet molding compound resins from soybean oil: Thickening behaviour and mechanical properties. Polym. Eng. Sci. 47(9), 1469-1479 (2007).
306. S. Grishchuk and J. Karger-Kocsis, Hybrid thermosets from vinyl ester resin and acrylated epoxidized soybean oil (AESO). Exp. Polym. Lett. 5(1), 2-11 (2011).
307. G.W. Borden, O.W. Smith, and D.J. Trecker, Radiation curable compositions of acrylated epoxidized soybean oil amine compounds useful as inks and coatings and methods of curing same, US Patent 3,878,077, assigned to Union Carbide Corporation, New York, NY (April 15, 1975).
308. G.W. Borden, O.W. Smith, and D.J. Trecker, Coating and ink compositions and method, US Patent 4,157,947, assigned to Union Carbide Corporation, New York, NY (June 12, 1979).
309. H. Pelletier and A. Gandini, Preparation of acrylated and urethanated triacylglycerols. Eur. J. Lipid Sci. Technol. 108(5 ), 411-420 (2006).
310. T. Eren and S.H. Kusefoglu, Synthesis and polymerization of the acrylamide derivatives of fatty compounds. J. Appl. Polym. Sci. 97(6), 2264-2272 (2005).
311. M. Black, J. Messman, and J. Rawlins, Chain transfer of vegetable oil macromonomers in acrylic solution copolymerization. J. Appl. Polym. Sci. 120(3), 390-1396 (2011).
312. L. Montero de Espinosa, J.C. Ronda, M. Galia, and V. Cádiz, A new route to acrylate oils: Crosslinking and properties of acrylate triglycerides from high oleic sunflower oil. J. Polym. Sci. Part A Polym. Chem. 47(4), 1159-1167 (2009).
313. J.J. La Scala and R.P. Wool, Property analysis of triglyceride-based thermosets. Polymer 46(1), 61-69 (2005).
314. A. De Klerk and R.J.J. Nel, Phenol alkylation with 1-octene on solid acid catalysts. Ind. Eng. Chem. Res. 46, 7066-7072 (2007).
315. B. Chaudhuri and M.M. Sharma, Alkylation of phenol with.alpha.-methylstyrene, propylene, butenes, isoamylene, 1-octene, and diisobutylene: Heterogeneous vs. homogeneous catalysts. Ind. Eng. Chem. Res. 30, 227-231 (1991).
316. J.B. Niederl and C.Liota, The synthesis of phenolic long chain fatty acids. J. Am. Chem. Soc. 55, 3025-3026 (1933).
317. J.B. Niederl, R.A. Smith, and M.F. McGreal, Addition of phenols to the ethylenic linkage. the action of phenols of allyl alcohol, allyl acetate, vinyl acetate and allyl ethers. J. Am. Chem. Soc. 53(9), 3390-3396 (1931).
318. J.B. Niederl and S. Natelson, Addition of phenols to the ethylenic linkage. reaction mechanism and synthesis of certain phenolic ethers. J. Am. Chem. Soc. 53, 272-277 (1931).
319. W.C. Ault and A. Eisner, Improved yields in the acid catalyzed addition of phenols and phenyl ethers to oleic acid. J. Am. Oil Chem. Soc. 39, 132-133 (1962).
320. Z.S. Petrović, K.-H. Hong, W. Shirley, and M. Ionescu, Phenol alkylated soybean oil. Polym. Preprints 46(1), 294-295 (2005).
321. M. Ionescu and Z.S. Petrovic, Phenolation of vegetable oils. J. Serb. Chem. Soc. 76(4), 591-606 (2011).
322. K.H. Hong, M.Sc.Thesis, Pittsburg State University, (2004).
323. M. Ionescu and Z.S. Petrović, Phenolation of vegetable oils, Presented at the 101st American Oil Chemists Society Annual Meeting & Expo Phoenix, AZ, USA, (2010) (unpublished).
324. K. Nanaumi, T. Horiuchi, M. Nomoto, and M. Inoue, Method of preparing vegetable oil-modified phenolic resin and laminate produced by using the same, US Patent 5,380,789 assigned to Hitachi Chemical Company, Ltd. (January 10, 1995).
325. Y. Nakano and T.A. Foglia, Methanesulfonic acid catalyzed addition of aromatic compounds to oleic acid. J. Am. Oil Chem. Soc. 61(3), 569-573 (1984).
326. A. Eisner, T. Perlstein, and W.C. Ault, Further studies on methanesulfonic acid catalyzed additions to oleic acid. J. Am. Oil Chem. Soc. 39, 290-292 (1962).
327. V.L. Larimer, Addition products of phenols and polymerized fatty acids, US Patent 3,468,920, assigned to Archer-Daniels-Midland Co. (September 23, 1969).
328. W.C. Ault and A. Eisner, Proces for addition of arylthiols, phenols and phenyl ethers to unsaturated fatty acids, US Patent 3,192,239 assigned to United States of America as represented by the Secretary of Agriculture (June 29, 1965).
329. F.O. Barrett and C. G.Goebel, Process for manufacture of phenolated fatty acids, US Patent 3,074,983 assigned to Emery Industries, Inc. (January 22, 1963).
330. A.T. Upshaw, Method of making thiol compounds from terminal olefinic compounds, US Patent Appl.20120232297 assigned to Chevron Phillips.
331. A.T. Upshaw, W.J. Fisher, and E.J. Netemeyer, Natural oil thiols and polyols, Presented at the The 12th Annual Green Chemistry and Engineering Conference, Washington, DC, (2008) (unpublished).
332. M.S. Matson and M.D. Refvik, Methods of mercaptanizing olefinic hydrocarbons and compositions, US Patent Appl.20120035291, assigned to Chevron Phillips.
333. G.B. Bantchev, J.A. Kenar, G. Biresaw, and M.G. Han, Free radical addition of butanethiol to vegetable oil double bonds. J. Agric. Food Chem. 57(4), 1281-1290 (2009).
334. B.K. Sharma, A. Adhvaryu, and S.Z. Erhan, Synthesis of hydroxy thio-ether derivatives of vegetable oil. J. Agric. Food Chem. 54, 9866-9872 (2006).
335. M. Desroches, S. Caillol, V. Lapinte, R. Auvergne, and B. Boutevin, Synthesis of biobased polyols by Thiol-Ene coupling from vegetable oils. Macromolecules 44(8), 2489-2500 (2011).
336. S. Caillol, B. Boutevin, and M. Desroches, Method for functionalizing natural fatty substances, WO Patent Appl.2012001315 A1 assigned to Ecole Nationale Supérieure De Chimie De Montpellier, (C.N.R.S).
337. R. Huisgen, 1,3-Dipolar cycloadditions. past and future. Angew. Chem. Int. Ed. 2(10), 565-598 (1963).
338. T.P. Lodge, Click chemistry in macromolecular science. Macromolecules 42(12), 3827-3829 (2009).
339. D.D. Diaz, S. Punna, P. Holzer, A.K. Mcpherson, K.B. Sharpless, V.V. Fokin, and M.G. Finn, Click chemistry in materials synthesis. 1. adhesive polymers from copper-catalyzed azide-alkyne cycloaddition. J. Polym. Sci. Part A Polym. Chem. 42, 4392-4403 (2004).
340. S. Furmeier and J.O. Metzger, Fat-derived aziridines and their N-substituted derivatives: Biologically active compounds based on renewable raw materials. Eur. J. Org. Chem. 4, 649-659 (2003).
341. J.O. Metzger and S. Fürmeier, New type of skipped oligoaziridines: Synthesis of new fatty acid derivatives containing aziridine functions. Eur. J. Org. Chem. 1999(3), 661-664 (1999).
342. V. Avidon and A. Shani, Functionalization at the double-bond region of jojoba oil. 6. Production of amines via azides. J. Am. Oil Chem. Soc. 71(9), 993-997 (1994).
343. D.V. Palaskar, A. Boyer, E. Cloutet, C. Alfos, and H. Cramail, Synthesis of biobased polyurethane from oleic and ricinoleic acids as the renewable resources via the AB-type self-condensation approach. Biomacromolecules 11(5), 1202-1211 (2010).
344. J. Hong, Q. Luo, X. Wan, Z.S. Petrovic, and B.K. Shah, Biopolymers from vegetable oils via catalyst-and solvent-free "Click" chemistry: Effects of cross-linking density. Biomacromolecules 13(1), 261-266 (2012).
345. J. Hong, B.K. Shah, and Z.S. Petrović, Vegetable oil cast resins via "Click" chemistry: Effects of cross-linkers. Eur. J. Lipid Chem. Technol. 115(1), 55-60 (2013).
346. K.J. Ivin, Some recent applications of olefin metathesis in organic synthesis: A review. J. Mol. Cat. A Chem. 133, 1-16 (1998).
347. K.J. Ivin and J.C. Mol, Olefin Metathesis and Metathesis Polymerization, Academic press, London (1997).
348. M.D. Refvik, R.C. Larock, and Q. Tian, Rutheniumcatalyzed metathesis of vegetable oils. JAOCS 76(1), 93-98 (1999).
349. U. Biermann, J.O. Metzger, and M.A.R. Meier, Acyclic triene metathesis oligo-and polymerization of high oleic sun flower oil. Macromol. Chem. Phys. 211, 854-862 (2010).
350. F.B.H. Ahmad, S. Hamdan, M.A. Yarmo, and A. Alimunir, Co-metathesis reaction of crude palm oil and ethene. J. Am. Oil Chem. Soc. 72, 757-758 (1995).
351. D.W. Rosenburg, Co-metathesis of triglycerides and ethylene, US Patent 4,545,941, assigned to A. E. Staley Manufacturing Company (October 8, 1985).
352. K.A. Burdett, L.D. Harris, P. Margl, B.R. Maughon, T. Mokhtar-Zadeh, P.C. Saucier, and E.P. Wasserman, Renewable monomer feedstocks via olefin metathesis: Fundamental mechanistic studies of methyl oleate ethenolysis with the first-generation grubbs catalyst. Organometallics 23(9), 2027-2047 (2004).
353. J.C. Mol, Metathesis of unsaturated fatty acid esters and fatty oils. J. Mol. Catal. 90, 185-200 (1994).
354. T. Jacobs, A. Rybak, and M.A.R. Meier, Cross-metathesis reactions of allyl chloride with fatty acid methyl esters: Efficient synthesis of á,ù-difunctional chemical intermediates from renewable raw materials. Appl. Catal. A 353, 32-35 (2009).
355. A. Rybak and M.A.R. Meier, Cross-metathesis of fatty acid derivatives with methyl acrylate: Renewable raw materials for the chemical industry. Green Chem. 9, 1356-1361 (2007).
356. L. Montero de Espinosa and M.A.R. Meier, Plant oils: The perfect renewable resource for polymer science?!, Eur. Polym. J. 47(5), 837-852 (2011).
357. B.R. Maughon, K.A. Burdett, and Z. Lysenko, Process for the synthesis of unsaturated alcohols, US Patent 7,176,336, assigned to Dow Global Technologies Inc. (February 13, 2007).
358. H.L. Ngo, K. Jones, and T.A. Foglia, Metathesis of unsaturated fatty acids: Synthesis of long-chain unsaturated-á,ù-dicarboxylic acids. J. Amer. Oil Chem. Soc. 83(7), 629-634 (2006).
359. P.B. Van Dam, M.C. Mittelmeijer, and C. Boelhouwer, Homogeneous catalytic metathesis of unsaturated fatty esters: New synthetic method for preparation of unsaturated mono-and dicarboxylic acids. J. Amer. Oil Chem. Soc. 51, 389-392 (1974).
360. J.A. Zerkowski and D.K.Y. Solaiman, Polyhydroxy fatty acids derived from sophorolipids. J. Am. Oil Chem. Soc. 84, 463-471 (2007).
361. M. Sibeijin, E.K. Poels, A. Bliek, and J.A. Moulijn, Technological and economical aspects of the metathesis of unsaturated esters. J. Am. Oil Chem. Soc. 71, 553-561 (1994).
362. Y. Xia and R.C. Larock, Castor oil-based thermosets with varied crosslink densities prepared by ring-opening metathesis polymerization (romp). Polym. Preprints 51(1), 765-766 (2010).
363. P. Henna and R.C. Larock, Novel thermosets obtained by the ring-opening metathesis polymerization of a functionalized vegetable oil and dicyclopentadiene. J. Appl. Polym. Sci. 112(3), 1788-1797 (2009).
364. M.A.R. Meier, Metathesis with oleochemicals: New approaches for the utilization of plant oils as renewable resources in polymer science. Macromol. Chem. Phys. 210, 1073-1079 (2009).
365. A. Rybak, P.A. Fokou, and M.A.R. Meier, Metathesis as a versatile tool in oleochemistry. Eur. J. Lipid Sci. Technol. 110, 797-804 (2008).
366. J.C. Mol and R. Buffon, Metathesis in oleochemistry. J. Braz. Chem. Soc. 9(1), 1-11 (1998).