Stress corrosion cracking (SCC) of magnesium (Mg) alloys

Corrosion of Magnesium Alloys

Volumn , Issue , 2011, Pages 299-364

  Atrens, A ^a   Winzer, N ^b   Dietzel, W ^c   Srinivasan, P B ^c   Song, G L ^d  

^a UNIVERSITY OF QUEENSLAND   (Australia)

^b FRAUNHOFER INSTITUTE FOR MECHANICS OF MATERIALS IWM   (Germany)

^c INSTITUTE OF MATERIALS RESEARCH   (Germany)

^d GENERAL MOTORS CORPORATION   (United States)

Author keywords

Corrosion; Magnesium; Stress corrosion cracking

Indexed keywords

CORROSION; CRACKS; GRAIN BOUNDARIES; MAGNESIUM; MAGNESIUM ALLOYS; RESIDUAL STRESSES; TEXTURES; YIELD STRESS;

ADJACENT MATRIX; COMMON ENVIRONMENT; DAMAGE MECHANISM; GALVANIC CORROSION; HIGH PURITY WATER; INTERGRANULAR STRESS CORROSION CRACKING; THRESHOLD STRESS; TRANSGRANULAR STRESS CORROSION CRACKING;

STRESS CORROSION CRACKING;

EID: 84903352302     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9780857091413.3.299     Document Type: Chapter

References (197)

1. Song G., Atrens A. Corrosion mechanisms of magnesium alloys. Advanced Engineering Materials 1999, 1:11.
2. Song G.L., Atrens A. Understanding magnesium corrosion mechanism: a framework for improved alloy performance. Advanced Engineering Materials 2003, 5:837.
3. Song G., Atrens A. Recent insights into the mechanism of magnesium corrosion and research suggestions. Advanced Engineering Materials 2007, 9:177-183.
4. Shi Z., Liu M., Atrens A. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation. Corrosion Science 2010, 52:579-588.
5. Winzer N., Atrens A., Song G., Ghali E., Dietzel W., Kainer K.U., Hort N., Blawert C. A critical review of the stress corrosion cracking (SCC) of magnesium alloys. Advanced Engineering Materials 2005, 7:659-693.
6. Atrens A., Winzer N., Dietzel W. Stress corrosion cracking of magnesium alloys. Advanced Engineering Materials 2009, 10:1002/adem.200900287.
7. Atrens A., Wang Z.F. Stress corrosion cracking. Materials Forum 1995, 19:9.
8. Dietzel W. Encyclopedia of Materials. Science and Technology 2001, 8883. Elsevier Science Ltd, Amsterdam. K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan (Eds.).
9. Bursle A.J., Pugh E.N. FP Ford and ARC Westwood. Mechanisms of Environment Sensitive Cracking of Materials 1977, 471. Materials Society, London. P.R. Swann (Ed.).
10. Zhao M.C., Schmutz P., Brunner S., Liu M., Song G., Atrens A. An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing. Corrosion Science 2009, 51:1277-1292.
11. Zhao M.C., Liu M., Song G., Atrens A. Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41. Corrosion Science 2008, 50:3168.
12. Zhao M.C., Liu M., Song G., Atrens A. Influence of the β-phase morphology on the Corrosion of the Mg Alloy AZ91. Corrosion Science 2008, 50:1939.
13. Liu M., Zanna S., Ardelean H., Frateur I., Schmutz P., Song G., Atrens A., Marcus P. Influence of the β-phase morphology on the corrosion of the Mg alloy AZ91. Corrosion Science 2009, 51:1115-1127.
14. +. Advanced Engineering Materials 2007, 9:292-297.
15. Liu M., Uggowitzer P.J., Nagasekhar A.V., Schmutz P., Easton M., Song G., Atrens A. Calculated phase diagrams and the corrosion of die-cast Mg-Al alloys. Corrosion Science 2009, 51:602.
16. Liu M., Qiu D., Zhao M.C., Song G., Atrens A. The effect of crystallographic orientation on the active corrosion of pure magnesium. Scripta Materialia 2008, 58:421-424.
17. Jia J.X., Song G.L., Atrens A. Influence of geometry on galvanic corrosion of AZ91D coupled to steel. Corrosion Science 2006, 48:2133-2153.
18. Jia J.X., Atrens A., Song G., Muster T. Simulation of galvanic corrosion of magnesium coupled to a steel fastener in NaCl solution. Materials and Corrosion 2005, 56:468-474.
19. Song G.L., Atrens A., Dargusch M. Influence of microstructure on the corrosion of diecast AZ91D. Corrosion Science 1999, 41:249-273.
20. Zhao M.C., Liu M., Song G., Atrens A. Influence of homogenization annealing of AZ91 on mechanical properties and corrosion behavior. Advanced Engineering Materials 2008, 10:93-103.
21. Zhao M.C., Liu M., Song G., Atrens A. Influence of microstructure on corrosion of as-cast ZE41. Advanced Engineering Materials 2008, 10:104.
22. Peng L.M., Chang J.W., Guo X.W., Atrens A., Ding W.J., Peng Y.H. Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr. Journal of Applied Electrochemistry 2009, 39:913.
23. Song G.L., Atrens A., Wu X., Zhang B. Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride. Corrosion Science 1998, 40:1769-1791.
24. Song G.L., Atrens A., StJohn D.H., Nairn J., Lang Y. Electrochemical corrosion of pure magnesium in 1N NaCl. Corrosion Science 1997, 39:855-875.
25. Seyeux A., Liu M., Schmutz P., Song G., Atrens A., Marcus P. ToF-SIMS depth profile of the surface film on pure magnesium formed by immersion in pure water and the identification of magnesium hydride. Corrosion Science 2009, 51:1883-1886.
26. Song G., Atrens A., St.John D.H. Magnesium Technology 2001, 255. TMS, New Orleans. J. Hryn (Ed.).
27. Shi Z., Song G., Atrens A. Influence of the β phase on the corrosion performance of anodised coatings on magnesium-aluminium alloys. Corrosion Science 2005, 47:2760.
28. Haroush M.B., Hamu C.B., Eliezer D., Wagner L. The relation between microstructure and corrosion behavior of AZ80Mg alloy following different extrusion temperatures. Corrosion Science 2008, 50:1766-1778.
29. Bender S., Goellner J., Atrens A. A study of the corrosion of AZ91 in 1N NaCl and the mechanism of magnesium corrosion. Advanced Engineering Materials 2008, 10:583.
30. Wu G., Fan Y., Atrens A., Zhai C., Ding W. Electrochemical behavior of magnesium alloys AZ91D, AZCe2, and AZLa1 in chloride and sulfate solutions. Journal of Applied Electrochemistry 2008, 38:251-257.
31. Chang J.W., Guo X.W., Fu P.H., Atrens A., Peng L.M., Ding W.J., Wang X.S. A comparison of the corrosion behaviour in 5% NaCl solution of Mg alloys NZ30K and AZ91D. Journal of Applied Electrochemistry 2008, 38:207.
32. Williams G., McMurray H.N. Localized corrosion of magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique. Journal of the Electrochemical Society 2008, 155:C340-C349.
33. Zhou W., Aug N.N., Sun Y. Effect of antimony, bismuth and calcium addition on corrosion and electrochemical behaviour of AZ91 magnesium alloy. Corrosion Science 2009, 51:403-408.
34. Neil W.C., Forsyth M., Howlett P.C., Hutchinson C.R., Hinton B.R.W. Corrosion of magnesium alloy ZE41 - the role of microstructural features. Corrosion Science 2009, 51:387-394.
35. Staiger M.P., Pietak A.M., Huadmai J., Dias G. Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials 2006, 27:1728-1734.
36. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Stress corrosion cracking (SCC) in Mg-Al alloys studied using compact specimens. Advanced Engineering Materials 2008, 10:453-458.
37. Winzer N., Atrens A., Dietzel W., Raja V.S., Song G., Kainer K.U. Characterisation of stress corrosion cracking (SCC) of Mg-Al Alloys. Materials Science and Engineering A 2008, 488:339-351.
38. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Comparison of the linearly increasing stress test and the constant extension rate test in the evaluation of transgranular stress corrosion cracking of magnesium. Materials Science and Engineering A 2008, 472:97-106.
39. Jia J.X., Song G., Atrens A. Experimental measurement and computer simmulation of galvanic corrosion of magnesium coupled to steel. Advanced Engineering Materials 2007, 9:65-74.
40. Shi Z., Song G., Atrens A. The corrosion performance of anodised magnesium alloys. Corrosion Science 2006, 48:3531-3546.
41. Shi Z., Song G.L., Atrens A. Influence of anodising current on the corrosion resistance of anodised AZ91D magnesium alloy. Corrosion Science 2006, 48:1939-1959.
42. Shi Z., Song G.L., Atrens A. Corrosion resistance of anodised single-phase Mg alloys. Surface and Coatings Technology 2006, 201:492-503.
43. Song R.G., Blawert C., Dietzel W., Atrens A. A study of the stress corrosion cracking and hydrogen embrittlement of AZ31 magnesium alloy. Materials Science and Engineering 2005, 399:308-317.
44. Jia J.X., Song G., Atrens A. Boundary element predictions of the influence of the electrolyte on the galvanic corrosion of AZ91D coupled to steel. Materials and Corrosion 2005, 56:259-270.
45. Atrens A. Suggestions for research directions in magnesium corrosion arising from the Wolfsburg Conference. Advanced Engineering Materials 2004, 6:83-84.
46. Abhijeet S.B., Balasubramaniam R., Gupta M. Corrosion behaviour of Mg-Cu and Mg-Mo composites in 3.5% NaCl. Corrosion Science 2008, 50:2423-2428.
47. Zhang J., Zhang D., Tian Z., Wang J., Liu K., Lu H., Tang D., Meng J. Microstructures, tensile properties and corrosion behavior of die-cast Mg-4Al-based alloys containing La and/or Ce. Materials Science and Engineering: A 2008, 489:113-119.
48. Zhang E., He W., Du H., Yang K. Microstructure, mechanical properties and corrosion properties of Mg-Zn-Y alloys with low Zn content. Materials Science and Engineering 2008, A488:102-111.
49. 4 solution. Materials Science and Engineering 2008, A488:428-434.
50. Jönsson M., Persson D., Leygraf C. Atmospheric corrosion of field-exposed magnesium alloy AZ91D. Corrosion Science 2008, 50:1406-1413.
51. Kannan M.B. RK Singh Raman, In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid. Biomaterials 2008, 29:2306-2314.
52. Chen J., Dong J., Wang J., Han E., Kev W. Effect of magnesium hydride on the corrosion behavior of an AZ91 magnesium alloy in sodium chloride solution. Corrosion Science 2008, 50:3610-3614.
53. Zhou X., Huang Y., Wei Z., Chen Q., Gan F. Improvement of corrosion resistance of AZ91D magnesium alloy by holmium addition. Corrosion Science 2006, 48:4223-4233.
54. Chen J., Wang J., Han E., Dong J., Ke W. States and transport of hydrogen in the corrosion process of an AZ91 magnesium alloy in aqueous solution. Corrosion Science 2008, 50:1292-1305.
55. Liu L.J., Schlesinger M. Corrosion of magnesium and its alloys. Corrosion Science 2009, 51:1733-1737.
56. Birbilis N., Easton M.A., Sudholz A.D., Zhu S.M., Gibson M.A. On the corrosion of binary rare earth alloys. Corrosion Science 2009, 51:683-689.
57. Song G. Effect of tin modification on corrosion of AM70 magnesium alloy. Corrosion Science 2009, 51:2063-2070.
58. Liu W., Cao F., Chang L., Zhang Z., Zhang J. Effect of rare earth element Ce and La on corrosion behavior of AM60 magnesium alloy. Corrosion Science 2009, 51:1334-1343.
59. Loose W.S., Barbian H.A. Symposium on Stress Corrosion Cracking of Metals 1945, 273. American Society for Testing Materials, USA.
60. Miller W.K. Stress Corrosion Cracking: Materials Performance and Evaluation 1992, 251. ASM International, Metals Park, Ohio. R.H. Jones (Ed.).
61. Speidel M.O., Fourt P.M. Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys 1977, 57. NACE, Houston, TX.
62. Lyon P. Magnesium Electron UK, private communication Feb 2001.
63. Handbook A.S.M. Corrosion 1992, Vol 13. ASM International, Metals Park, Ohio. fourth printing. J.R. Davised (Ed.).
64. Atrens A., Winzer N., Song G.L., Dietzel W., Blawert C. Stress corrosion cracking and hydrogen diffusion in magnesium. Advanced Engineering Materials 2006, 8:749-751.
65. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Stress corrosion cracking in magnesium alloys: characterisation and Prevention. Journal of Metals 2007, 59(8):49-53.
66. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Magnesium stress corrosion cracking. Transactions of Nonferrous Metals Society of China 2007, 17:S150-S155. Part A Sp. Iss. 1, Nov.
67. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Evaluation of the delayed hydride cracking mechanism for transgranular stress corrosion cracking of magnesium alloys. Materials Science and Engineering A 2007, 466:18-31.
68. Kannan M.B., Dietzel W., Blawert C., Atrens A., Lyon P. Stress corrosion cracking of rare-earth-containing magnesium alloys ZE41, QE22, and Elektron 21 (EV31A) compared with AZ80. Materials Science and Engineering A 2008, 480:529-539.
69. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Comparison of the linearly increasing stress test and the constant extension rate test in the evaluation of transgranular stress corrosion cracking of magnesium. Materials Science and Engineering A 2008, 472:97-106.
70. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. The fractography of stress corrosion cracking (SCC) of Mg-Al alloys. Metallurgical and Materials Transactions A 2008, 39:1157.
71. Atrens A., Wang J.Q., Stiller K., Andren H.O. Atom probe field ion microscope measurements of carbon segregation at an α:α grain boundary and service failures by intergranular stress corrosion cracking. Corrosion Science 2006, 48:79-92.
72. Wang J.Q., Atrens A. Analysis of service stress corrosion cracking in a natural gas transmission pipeline, active or dormant?. Engineering Failure Analysis 2004, 11:3.
73. Gamboa E., Atrens A. Material influence on the stress corrosion cracking of rock bolts. Engineering Failure Analysis 2005, 12:201.
74. Wang J., Atrens A. SCC initiation for X65 pipeline steel in 'high' pH carbonate/bicarbonate solution. Corrosion Science 2003, 45:2199.
75. Gamboa E., Atrens A. Environmental influence on the stress corrosion cracking of rock bolts. Engineering Failure Analysis 2003, 10:521.
76. Wang J.Q., Atrens A., Cousens D.R., Kelly P.M., Nockolds C., Bulcock S. Measurement of grain boundary composition for X52 pipeline steel. Acta Materialia 1998, 46:5677.
77. Oehlert A., Atrens A. SCC Propagation in Aermet 100. Journal of Materials Science 1998, 33:775-781.
78. Oehlert A., Atrens A. Environmental assisted fracture for 4340 steel in water and air of various humidities. Journal of Materials Science 1997, 32:6519.
79. Oehlert A., Atrens A. Initiation and propagation of stress corrosion cracking in AISI 4340 and 3.5NiCrMoV rotor steel in constant load tests. Corrosion Science 1996, 38:1159.
80. Wang Z.F., Atrens A. Initiation of stress corrosion cracking for pipeline steels in a carbonate-bicarbonate solution. Metallurgical and Materials Transactions 1996, 27A:2686.
81. Oehlert A., Atrens A. Room temperature creep of high strength steels. Acta Metallurgica et Materialia 1994, 42:1493.
82. Atrens A., Brosnan C.C., Ramamurthy S., Oehlert A., Smith I.O. Linearly increasing stress test (LIST) for SCC research. Measurement Science and Technology 1993, 4:1281.
83. Ramamurthy S., Atrens A. The stress corrosion cracking of as-quenched 4340 and 3.5NiCrMoV steels under stress rate control in distilled water at 90°C. Corrosion Science 1993, 34:1385.
84. Rieck R.M., Atrens A., Smith I.O. The role of crack tip strain rate in the stress corrosion cracking of high strength steels in water. Metallurgical Transactions 1989, 20A:889.
85. Song R.G., Dietzel W., Zhang B.J., Liu W.J., Tseng M.K., Atrens A. Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy. Acta Materialia 2004, 52:4727-4743.
86. Rieck R.M., Atrens A., Smith I.O. Stress corrosion cracking and hydrogen embrittlement of cold worked AISI type 304 austenitic stainless steel in mode I and mode III. Materials Science and Technology 1986, 2:1066-1073.
87. Cann C.D., Atrens A. A metallographic study of the terminal solubility of hydrogen in zirconium at low hydrogen concentrations. Journal of Nuclear Materials 1980, 88:42.
88. Atrens A., Mezzanotte D., Fiore N.F., Genshaw M.A. Electrochemical studies of hydrogen diffusion and permeability in Ni. Corrosion Science 1980, 20:673.
89. Atrens A., Bellina J.J., Fiore N.F., Coyle R.J. The Metal Science of Stainless Steels 1978, 54. TMS-AIME. W.E. Collings, H.W. King (Eds.).
90. Zeng R., Han E., Ke W., Dietzel W., Kainer K.U., Atrens A. Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60. International Journal of Fatigue 2010, 32:411-419.
91. Atrens A., Meyer H., Faber G., Schneider K. Corrosion in Power Generating Equipment 1984, 299. Plenum, New York. M.O. Speidel, A. Atrens (Eds.).
92. Atrens A., Hoffelner W., Duering T.W., Allison J. Subsurface crack initiation in high cycle fatigue in Ti-6Al-4V and a typical martensitic stainless steel. Scripta Metallurgica 1983, 17:601.
93. Zeng R., Han E., Ke W., Dietzel W., Kainer K.U., Atrens A. Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60. International Journal of Fatigue 2010, 32:411-419.
94. Ritchie I.G., Atrens A. The Diffusion of oxygen in alpha-zirconium. Journal of Nuclear Materials 1977, 67:254.
95. Jin S., Atrens A. ESCA - Studies of the structure and composition of the passive film formed on stainless steels by various immersion times in 0.1M NaCl solution. Applied Physics A 1987, 42:149.
96. Lim A.S., Atrens A. ESCA Studies of Fe-Ti. Applied Physics A 1992, 54:500.
97. Lim A.S., Atrens A. ESCA studies of nitrogen containing stainless steels. Applied Physics A 1990, 51:411.
98. Lynch S.P., Trevena P. Stress corrosion cracking and liquid metal embrittlement in pure magnesium. Corrosion 1988, 44:113-123.
99. Meletis E.I., Hochman R.F. Crystallography of stress corrosion cracking in pure magnesium. Corrosion 1984, 40:39-48.
100. ASM Specialty Handbook: Magnesium and Magnesium Alloys 1999, 211. ASM International, Metals Park Ohio.
101. Stampella R.S., Procter R.P.M., Ashworth V. Environmentally induced cracking of magnesium. Corrosion Science 1984, 24:325-341.
102. Winzer N., Song G., Atrens A., Dietzel W., Blawert C. Corros Preven 2005 2005, 37. ACA.
103. Busk R.S. Magnesium Products Design Marcel Dekker 1986, 256. New York.
104. Priest D.K., Beck F.H., Fontana M.G. Stress corrosion mechanism in a magnesium-base alloy. Transactions of the American Society for Metals 1955, 47:473-492.
105. Pelensky M.A., Gallaccio A. Stress Corrosion Testing 1967, 107. STP425, ASTM, West Conshohocken, Pennsylvania.
106. Fairman L., Bray H.J. Transgranular SCC in magnesium alloys. Corrosion Science 1971, 11:533-541.
107. Miller W.K. Materials Research Society Symposium Proceedings 1988, 125:253.
108. Arnon A., Aghion E. Stress corrosion cracking of nano/sub-micron E906 magnesium alloy. Advanced Engineering Materials 2008, 10:742-745.
109. Chen J., Ai M., Wang J., Han E., Ke W. Stress corrosion cracking behaviours of AZ91 magnesium alloy in deicer solution using constant load. Materials Science and Engineering 2009, A515:79-84.
110. ASM ASM Handbook on line 2009, ASM International, Materials Park, OH.
111. Minimum values, Magnesium Electron, private communication 2009.
112. Kannan M.B., Raman R.K.S. In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid. Biomaterials 2008, 29:2306-2314.
113. Makar G.L., Kruger J., Sieradzki K. Stress corrosion cracking of rapidly solidified magnesium alloys. Corrosion Science 1993, 34:1311-1342.
114. Wearmouth W.R., Dean G.P., Parkins R.N. Role of stress in stress corrosion cracking of a Mg-Al alloy. Corrosion 1973, 29:251-260.
115. Chakrapani D.G., Pugh E.N. The transgranular SCC of a Mg-Al alloy: Crystallographic, fractographic and acoustic-emission studies. Metallurgical Transactions 1975, 6A:1155-1163.
116. Oryall G., Tromans D. Transgranular stress corrosion cracking of solution treated and quenched Mg-86 Al alloy. Corrosion 1971, 27:334-341.
117. Chakrapani D.G., Pugh E.N. On the fractography of transgranular stress corrosion failures in a Mg-Al alloy. Corrosion 1975, 31:247-251.
118. Chakrapani D.G., Pugh E.N. Hydrogen embrittlement in a Mg-Al Alloy. Metallurgical Transaction 1976, 7A:173-178.
119. Perryman E.C.W. Stress corrosion of magnesium alloys. Journal of the Institute of Metals 1951, 79:621-642.
120. Ebtehaj K., Hardie D., Parkins R.N. The influence of chloride-chromate solution composition on the stress corrosion cracking of a Mg-Al alloy. Corrosion Science 1993, 28:811-821.
121. Nozaki T., Hanaki S., Yamashita M., Uchida H. 2003, K-15. Osaka.
122. Fairman L., West J.M. Stress corrosion cracking of a magnesium alloy. Corrosion Science 1965, 5:711-716.
123. 4 aqueous solution at room temperature. Journal of Materials Technology (Zeitschrift fur Werkstofftechnik) 1979, 10:119-123.
124. Fairman L., Bray H.J. British Corrosion Journal 1971, 6:170-174.
125. Pardue W.M., Beck F.H., Fontana M.G. Propagation of stress-corrosion cracking in a magnesium-base alloy as determined by several techniques. Transactions of the American Society for Metals 1961, 54:539-548.
126. Tomashov N.D., Modestova V.N. Intercrystalline Corrosion and Corrosion of Metals Under Stress 1962, 251-262. London. I.A. Levin (Ed.).
127. Timonova M.A. Intercrystalline Corrosion and Corrosion of Metals Under Stress 1962, 263. London. I.A. Levin (Ed.).
128. Rokhlin L.L. Magnesium Alloys Containing Rare Earth Metals 2003, Taylor and Francis, London.
129. Nie J.F., Gao X., Zhu S.M. Enhanced age hardening response and creep resistance of Mg-Gd alloys containing Zn. Scripta Materialia 2005, 53:1049-1053.
130. Sanchez C., Nussbaum C., Azavant P., Octor H. Elevated temperature behaviour of rapidly solidified magnesium alloys containing rare earths. Materials Science Engineering 1996, A221:48-57.
131. Lyon P., Wilks T., Syed I. The Influence of Alloying Elements and Heat Treatment upon the Properties of Elektron 21 (EV31A) Alloy. Magnesium Technology 2005 2005, 303. Warrendale, PA. N.R. Neelameggham, H.I. Kaplan, B.R. Powell (Eds.).
132. Chang J., Guo X., Fu P., Peng L., Ding W. Effect of heat treatment on corrosion and electrochemical behaviour of Mg-3Nd-0.2Zn-0.4Zr (wt.%) alloy. Electrochimica Acta 2007, 52:3160-3167.
133. Nordlien J.H., Nisancioglu K., Ono S., Masuko N. Morphology and structure of water-formed oxides on ternary MgAl alloys. Journal of the Electrochemical Society 1997, 144:461-466.
134. Krishnamurthy S., Khobaib M., Robertson E., Froes F.H. Corrosion behaviour of rapidly solidified Mg-Nd and Mg-Y alloys. Materials Science Engineering 1988, 99:507-511.
135. Heidenrich R., Gerould C.H. FE McNulty. Transactions of the AIME 1946, 166:15.
136. Rokhlin L.L. Magnesium Alloys Containing Rare Earth Metals 2003, 221. Taylor and Francis, London.
137. Exterior Stress Corrosion Resistance of Commercial Magnesium Alloys 1966, Report Mt 19622, Dow Chemical USA.
138. Song G., Xu Z. The surface, microstructure and corrosion of magnesium alloy AZ31 sheet. Electrochimica Acta 2010, 55:4148.
139. Stephens R.I., Schrader C.D., Goodenberger D.L., Lease K.B., Ogarevic V.V., Perov S.N. Society of Automotive Engineers 1993, No. 930752, USA.
140. Mathieu S., Rapin C., Hazan J., Steinmetz P. Corrosion behaviour of high pressure die-cast and semi-solid cast AZ91D alloys. Corrosion Science 2002, 44:2737-2756.
141. Timonova M.A., D'yalchenko L.I., Dolzhanskii Y.M., Al'tman M.B., Sakharova N.V., Blyablin A.A. Protection of Metals 1983, 19:99-102.
142. Marichev V.A., Shipilov S.A. Influence of electrochemical polarisation on crackgrowth in corrosion cracking and corrosion fatigue of magnesium alloys. Soviet Materials Science 1986, 33:240-244.
143. Mears R.B., Brown R.H., Dix E.H. A Generalized Theory of Corrosion in Alloys. Symposium on Stress-Corrosion Cracking of Metals 1945, 323. American Society for Testing Materials, West-Conshohocken, Pennsylvania.
144. Speidel M.O., Blackburn M.J., Beck T.R., Feeney J.A. Corrosion Fatigue: Chemistry, Mechanics and Microstructure 1972, 324. NACE-2.
145. Kiszka J.C. Stress corrosion tests of some wrought magnesium-lithium base alloys. Materials Protection 1965, 4:28-29.
146. Munitz A., Cotler C., Shaham H., Kohn G. Electron beam welding of magnesium AZ91D plates. Welding Journal 2000, 79:202s-208s.
147. Matsumoto J., Kobayashi M., Hotta M. Arc welding of magnesium casting alloy AM60. Welding International 1990, 4:23-28.
148. Cao X., Jahazi M., Immarigeon J.P., Wallace W. A review of laser welding techniques for magnesium alloys. Journal of Materials Processing Technology 2006, 171:188-204.
149. WM Thomas, US Patent No. 5,460,317.
150. Zettler R., Blanco A.C., dos Santos J.F., Marya S. The effect of process parameters and tool geometry on thermal field development and weld formation in friction stir welding of the alloy AZ31 and AZ61. Magnesium Technology 2005, 409-423. TMS, The Minerals, Metals & Materials Society. N.R. Neelameggham, H.I. Daplan, B.R. Powell (Eds.).
151. Kannan M.B., Dietzel W., Blawert C., Riekehr S., Kocak M. Stress corrosion cracking behavior of Nd:YAG laser butt welded AZ31Mg sheet. Materials Science and Engineering 2007, A444:220-226.
152. Kannan M.B., Dietzel W., Zeng R., Zettler R., dos Santos J.F. A study on the SCC susceptibility of friction stir welded AZ31Mg sheet. Materials Science and Engineering 2007, A460-461:243-250.
153. Winzer N., Xu P., Bender S., Gross T., Unger W.E.S., Cross C.E. Stress corrosion cracking of gas-tungsten arc welds in continuous-cast AZ31Mg alloy sheet. Corrosion Science 2009, 51:1950-1963.
154. Srinivasan P.B., Zettler R., Blawert C., Dietzel W. A study on the effect of plasma electrolytic oxidation on the stress corrosion cracking behaviour of a wrought AZ61 magnesium alloy and its friction stir weldment. Materials Characterization 2009, 60:389-396.
155. Srinivasan P.B., Riekehr S., Blawert C., Dietzel W., Kocak M. Slow strain rate stress corrosion cracking behaviour of as-welded and plasma electrolytic oxidation treated AZ31HP magnesium alloy autogenous laser beam weldment. Materials Science and Engineering A 2009, A517:197-203.
156. Wei Z.L., Chen Q.R., Guo Z.C., Yang L., Xiu N.X., Huang Y.W. Magnesium Proceedings of the 6th International Conference Magnesium Alloys and Their Applications 2004, 649. Wiley-VCH, Weinheim, Berlin, Darmstadt und Zürich. K.U. Kainer (Ed.).
157. Marrow T.J., Ahmad A.B., Kahn I.N., Sim S.M.A., Torkamani S. Environment-assisted cracking of cast WE43-T6 magnesium. Materials Science and Engineering 2004, A387-389:419-423.
158. -. Corrosion Science 1967, 7:61-62.
159. Yakovlev V.B., Trutneva L.P., Isaev N.I., Nemetch G. Influence of protective films on kinetics of stress corrosion cracking of magnesium alloy MA2-1. Protection of Metals 1984, 20:300-306.
160. Scully J.C. Corrosion 1993, 8:115-142. Butterworth Heinemann, Oxford. L.L. Shrier, R.A. Jarman, G.T. Burstein (Eds.).
161. Logan H.L. Mechanism of stress-corrosion cracking in the AZ31B magnesium alloy. Journal of Research of the National Bureau of Standards 1958, 61:503-508.
162. Kannan M.B., Dietzel W., Raman R.K.S., Lyon P. Hydrogen induced cracking in magnesium alloy under cathodic polarisation. Scripta Materialia 2007, 57:579-581.
163. Sager G.F., Brown R.H., Mears R.B. Symposium on Stress-Corrosion Cracking of Metals 1945, 267. ASTM.
164. Loose W.S. Magnesium 1956, 173. ASM, Cleveland, OH.
165. Romanov V.V. Intercrystalline Corrosion and Corrosion of Metals Under Stress 1962, 283. London. I.A. Levin (Ed.).
166. Srinivasan P.B., Blawert C., Dietzel W. Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of AM50 magnesium alloy. Materials Science and Engineering 2008, A494:401-406.
167. Srinivasan P.B., Blawert C., Dietzel W. Effect of plasma electrolytic oxidation coating on the corrosion and stress corrosion cracking behaviour of wrought AZ61 magnesium alloy. Corrosion Science 2008, 50:2415-2418.
168. Srinivasan P.B., Blawert C., Dietzel W., Kainer K.U. Stress corrosion cracking behaviour of a surface-modified magnesium alloy. Scripta Materialia 2008, 59:43-46.
169. Meller F., Metzger M. U.S.N.A.C.A. Tech Note 1985, No 4019.
170. Logan H.L. Film rupture mechanism of stress corrosion. Journal of Research of the National Bureau of Standards 1952, 48:99-105.
171. Pugh E.H., Green J.A.S., Slattery P.W. Fracture 1969: The Proceedings of the Second International Conference on Fracture 1969, 387. Chapman and Hall Ltd, London. P.L. Pratt (Ed.).
172. Pickering H.W., Swann P.R. Electron metallography of chemical attack upon some alloys susceptible to stress corrosion cracking. Corrosion 1963, 19:373-389.
173. Anderson T.L. Fracture Mechanics: Fundamentals and Applications 1992, CRC Press, Boca Raton, FL. 2nd Edition.
174. Lynch S.P. 11th International Conference on Fracture 2005, paper p 3885.
175. Gangloff R.P. Hydrogen-assisted cracking. Environmentally assisted failure 2003, Vol 6:31-101. Elsevier Pergamon, Amsterdam, San Diego, CA. I. Milne, R.O. Ritchie, B. Karihaloo (Eds.).
176. Liu H.W. Stress-corrosion cracking and the interaction between crack-tip stress field and solute Atoms. Transactions of the ASME: Journal of Basic Engineering 1970, 92:633-638.
177. Van Leeuwen H.P. The kinetics of hydrogen embrittlement: a quantitative diffusion model. Engineering Fracture Mechanics 1974, 6:141-161.
178. Dutton R., Nuttall K., Puls M.P., Simpson L.A. Mechanisms of hydrogen induced delayed cracking in hydride forming materials. Metallurgical Transactions 1977, 8A:1553-1562.
179. Lufrano J., Sofronis P., Birnbaum H.K. Modelling of hydrogen transport of elastically accommodated hydride formation near a crack tip. Journal of Mechanics and Physics of Solids 1996, 44:179-205.
180. Sofronis P., McMeeking R.M. Numerical analysis of hydrogen transport near a blunting crack tip. Journal of Mechanics and Physics of Solids 1989, 37:317-350.
181. Varias A.G., Massih A.R. Hydride-induced embrittlement and fracture in metals - effect of stress and temperature distribution. Journal of Mechanics and Physics of Solids 2002, 50:1469-1510.
182. Varias A.G., Feng J.L. Simulation of hydride induced steady-state crack growth in metals - Part I: Growth near hydrogen chemical equilibrium. Computational Mechanics 2004, 34:339-356.
183. Varias A.G., Feng J.L. Simulation of hydride induced steady-state crack growth in metals - Part II: General near tip field. Computational Mechanics 2004, 34:357-376.
184. Renner J., Grabke H.J. Bestimmung von Diffusionskoeffizienten bei der Hydrierung von Legierungen. Zeitshrist Metallkunde 1978, 69:639.
185. Nishimura C., Komaki M., Amano M. Hydrogen permeation through magnesium. Journal of Alloys and Compounds 1999, 293-295:329.
186. Schimmel H.G. Towards a hydrogen-driven society 2004, PhD Thesis, Technical Univ Delft.
187. Dietzel W., Pfuff M., Winzer N. Testing and mesoscale modelling of hydrogen assisted cracking of magnesium. Engineering Fracture Mechanics 2010, 77:257-263.
188. Lynch S.P. Defence Science and Technology Organisation, Australia. presented at an International Symposium on Stress Corrosion Cracking in Structural Materials at ambient temperatures 2009, unpublished work, Padova, Italy, Aug 30-Sept 4, 2009.
189. Wang R.M., Eliezer A., Gutman E.M. An investigation on the microstructure of an AM50 magnesium alloy. Materials Science Engineering 2003, 355A:201-207.
190. Winzer N., Cross C.E. On the role of ß particles in stress corrosion cracking of Mg-Al Alloys. Metallurgical and Materials Transactions 2009, 40A:273-274.
191. Lufrano J., Sofronis P., Birnbaum H.K. Modeling of hydrogen transport and elastically accommodated hydride formation near a crack tip. Journal of Mechanics and Physics of Solids 1996, 44:179-205.
192. Schober T. The magnesium-hydrogen system: Transmission electron microscopy. Metallurgical and Materials Transactions 1981, 12A:951-957.
193. SR Agnew, CN Tomé, DW Brown, TM Holden, SC Vogel, Study of slip mechanisms in a magnesium alloy by neutron diffraction and modelling, Scripta Materialia, 48, 1003-1008.
194. Prakash A., Weygand S.M., Riedel H. Modelling the evolution of texture and grain shape in Mg alloy AZ31 using the crystal plasticity finite element method. Computational Materials Science 2009, 45:744-750.
195. RG Song, W Dietzel, BJ Zhang, WJ Liu, M Tseng, A Atrens, Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy. Acta Materialia, 52, 4727-4743.
196. Haenzi A.C., Gerber I., Schinhammer M., Loeffler J.F., Uggowitzer P.J. On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg-Y-Zn alloys. Acta Biomaterialia 2009, 6:182-1833.
197. Hort N., Huang Y., Fletcher D., Stormer M., Blawert C., Witte F., Drucker H., Willumeit R., Kainer K.U., Feyerabend F. Magnesium alloys as implant materials - Principles of property design for Mg-RE alloys. Acta Biomaterialia 2009, 6:1714-1725.