Fractography of stress corrosion cracking of Mg-Al alloys

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 39 A, Issue 5, 2008, Pages 1157-1173

  Winzer, Nicholas ^a,b   Atrens, A ^a,c   Dietzel, W ^d   Song, G ^a,e   Kainer, K U ^d  

^a UNIVERSITY OF QUEENSLAND   (Australia)

^b BAM FEDERAL INSTITUTE FOR MATERIALS RESEARCH AND TESTING   (Germany)

^c SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^d INSTITUTE OF MATERIALS RESEARCH   (Germany)

^e GENERAL MOTORS CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COALESCENCE; CRACK INITIATION; DISSOLUTION; FRACTOGRAPHY; STRAIN RATE; STRESS CORROSION CRACKING;

SINGLE-PHASE ALLOYS;

MAGNESIUM ALLOYS;

EID: 42149154380     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-008-9475-8     Document Type: Article

References (53)

1. N. Winzer, A. Atrens, G. Song, E. Ghali, W. Dietzel, K.U. Kainer, N. Hort, C. Blawert: Adv. Eng. Mater., 2005, vol. 8, pp. 659-93
2. S.P. Lynch, P. Trevena: Corrosion, 1988, vol. 44, pp. 113-24
3. E.I. Meletis, R.F. Hochman: Corrosion, 1984, vol. 40, pp. 39-45
4. D.G. Chakrapani, E.N. Pugh: Metall. Trans. A, 1976, vol. 7A, pp. 173-78
5. A.J. Bursle, E.N. Pugh: In Mechanisms of Environment Sensitive Cracking of Materials, P.R. Swann, F.P. Ford, and A.R.C. Westwood, eds., Materials Society, London, 1977, pp. 471-81
6. G.L. Makar, J. Kruger, K. Sieradzki: Corros. Sci., 1993, vol. 34, pp. 1311-42
7. H.K. Birnbaum: In Hydrogen Effects on Material Behavior, N.R. Moody, A.W. Thompson, eds., TMS, Warrendale, PA, 1990, pp. 639-60
8. S.P. Lynch: In Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody, A.W. Thompson, R.E. Ricker, G.W. Was, R.H. Jones, eds., TMS, Warrendale, PA, 2003, pp. 449-66
9. R.P. Gangloff: In Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, B. Karihaloo, eds., Elsevier, Oxford, United Kingdom, 2003, pp. 31-101
10. N. Winzer, A. Atrens, W. Dietzel, V.S. Raja, G. Song, and K.U. Kainer: Mater. Sci. Eng. A, doi: 10.1016/j.msea.2007.11.064
11. C.E. Coleman: In Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, and B. Karihaloo, eds., Elsevier, Oxford, United Kingdom, 2003, pp. 103-61
12. B. Cox: Proc. Metallography and Corrosion Symp., IMS Annual Conf., Calgary, 1986, NACE International, Houston, TX, 1986, pp. 153-74
13. B. Cox: J. Nucl. Mater., 1990, vol. 170, pp. 1-23
14. K. Nuttall, A.J. Rogowski: J. Nucl. Mater., 1979, vol. 80, pp. 279-90
15. G.K. Shek, M.T. Jovanovic, H. Seahra, Y. Ma, D. Li, R.L. Eadie: J. Nucl. Mater., 1996, vol. 231, pp. 221-30
16. L.A. Simpson: Mech. Behav. Mater., 1979, vol. 2, pp. 445-55
17. S.Q. Shi, M.P. Puls: J. Nucl. Mater., 1994, vol. 208, pp. 232-42
18. S.Q. Shi, M.P. Puls, S. Sagat: J. Nucl. Mater., 1994, vol. 208, pp. 243-50
19. R. Dutton, K. Nuttall, M.P. Puls, L.A. Simpson: Metall. Trans. A, 1977, vol. 8A, pp. 1553-62
20. H.P. Van Leeuwen: Eng. Fract. Mech., 1974, vol. 6, pp. 141-61
21. N. Winzer, A. Atrens, W. Dietzel, G. Song, K.U. Kainer: Mater. Sci. Eng., A, 2007, vol. 466, pp. 18-31
22. S.P. Lynch: Acta Metall., 1988, vol. 34, pp. 2639-61
23. A. Atrens, C.C. Brosnan, S. Ramamurthy, A. Oehlert, I.O. Smith: Meas. Sci. Technol., 1993, vol. 4, pp. 1281-92
24. W. Dietzel, K.H. Schwalbe: Z. Materialprüfung, 1986, vol. 28, pp. 368-72
25. A. Oehlert, A. Atrens: J. Mater. Sci., 1998, vol. 33, pp. 775-81
26. A. Oehlert, A. Atrens: J. Mater. Sci., 1997, vol. 32, pp. 6519-23
27. A. Oehlert, A. Atrens: Corros. Sci., 1996, vol. 38, pp. 1159-70
28. A. Oehlert, A. Atrens: Acta Metall. Mater., 1994, vol. 42, pp. 1493-1508
29. N. Winzer, A. Atrens, W. Dietzel, G. Song, and K.U. Kainer: Mater. Sci. Eng., A, 2007, doi: 10.1016/j.msea.2007.03.021, article in press
30. N. Winzer, A. Atrens, W. Dietzel, G. Song, and K.U. Kainer: Unpublished research
31. C. Nishimura, M. Komaki, M. Amano: J. Alloys Compd., 1999, vols. 293-295, pp. 329-33
32. V.I. Shapovalov, A.P. Semik, and A.G. Timchenko: Russ. Metall., 1993, vol. 3, pp. 21-24
33. V.I. Shapovalov, N.P. Serdyuk, and A.P. Semik: Dopov. Akad. Nauk Ukr. RSR, Ser. A: Fiz.-Mat. Tekh. Nauki, 1981, vol. 6, pp. 99-101
34. J. Koeneman, A.G. Metcalfe: Trans. ASM, 1959, vol. 51, pp. 1072-82
35. Y.C. Huang, T. Watanabe, R. Komatsu: In Proc. 4th Int. Conf. Vacuum Metallurgy, T. Saito, ed., ISIJ (Tokyo) and JIM (Sendai), Japan, 1973, pp. 176-79
36. Z.D. Popovic, G.R. Piercy: Metall. Trans. A, 1975, vol. 6A, pp. 1915-17
37. T. Watanabe, Y.C. Huang, R. Komatsu: J. Jpn. Inst. Light Met., 1975, vol. 26, pp. 76-81
38. K. Zeng, T. Klassen, W. Oelerich, R. Bormann: Int. J. Hydrogen Energy, 1999, vol. 24, pp. 989-1004
39. S.Q. Shi: J. Nucl. Mater., 1999, vol. 275, pp. 318-23
40. N. Winzer, A. Atrens, W. Dietzel, G. Song, K.U. Kainer: Mater. Sci. Eng., A, 2007, vol. 466, pp. 18-31
41. M.P. Puls: Acta Metall. Mater., 1981, vol. 29, pp. 1961-68
42. J. Lufrano, P. Sofronis, H.K. Birnbaum: J. Mech. Phys. Solids, 1996, vol. 44, pp. 179-205
43. A.G. Varias, A.R. Massih: J. Mech. Phys. Solids, 2002, vol. 50, pp. 1469-1510
44. F.H. Ellinger, C.E. Holley Jr., B.B. McInteer, D. Pavone, R.M. Potter, E. Staritzky, W.H. Zachariasen: J. Am. Chem. Soc., 1955, vol. 77, pp. 2647-48
45. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, 3rd ed., CRC, Boca Raton, FL, 2004
46. R.S. Stampella, R.P.M. Proctor, V. Ashworth: Corros. Sci., 1984, vol. 24, pp. 325-41
47. D.G. Chakrapani, E.N. Pugh: Corrosion, 1975, vol. 31, pp. 247-52
48. W.R. Wearmouth, G.P. Dean, R.N. Parkins: Corrosion, 1973, vol. 29, pp. 251-58
49. A. Krozer, B. Kasemo: J. Less-Common Met., 1990, vol. 160, pp. 323-42
50. A. Krozer, B. Kasemo: J. Phys.: Condens. Matter, 1989, vol. 1, pp. 1533-38
51. V.P. Zhdanov, A. Krozer, B. Kasemo: Phys. Rev. B, 1993, vol. 47, pp. 11044-11048
52. P. Hjort, A. Krozer, B. Kasemo: J. Alloys Compd., 1996, vol. 237, pp. 74-80
53. P. Hjort, A. Krozer, B. Kasemo: J. Alloys Compd., 1996, vol. 234, pp. L11-L15