Direct Strip Casting of Metals and Alloys

Direct Strip Casting of Metals and Alloys

Volumn , Issue , 2006, Pages 1-275

  Ferry, Michael ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84902756028     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845691660     Document Type: Book

References (275)

1. Aaronson H.I. The proeutectoid ferrite and proeutectoid cementite reactions. Decomposition of Austenite by Diffusional Processes 1962, 387-585. TMS-AIME, USA. V.F. Zackay, H.I. Aaronson (Eds.).
2. Aheam P.J., Flemings M.C. Dendrite morphology of a tin-bismuth alloy. Trans AIME 1967, 239:1590-1593.
3. Alberny R. Review of continuous casting. Rev. Metall. 1980, 77:581-596.
4. Althoff J. The influence of heat treatment on the mechanical properties of strip-cast aluminium semifabricated products. Aluminium 1980, 56:199-202.
5. Andersson B., Tibballs J.E. Analysis of deformation during twin-roll casting. Proc. Continuous Casting of Non-Ferrous Metals and Alloys 1989, 177-186. TMS, USA. H.D. Merchant, D.E. Tyler, E.H. Chia (Eds.).
6. ASM Metals Handbook Metallography and Microstructures 2004, Volume 9. ASM International, USA. 9th Edition. G.F. VanderVoort (Ed.).
7. Atkinson M. Assessing normal anisotropic plasticity of sheet metals. Sheet Metal Industries 1967, 44:167-178.
8. Bagshaw M.J., Hunt J.D., Jordan R.M. A steady state model for roll casting. Modelling and Control of Casting and Welding Processes 1986, 135-147. TMS-AIME, USA, Santa Barbara, USA.
9. Barbaro F.J., Krauklis P. Intragranular ferrite in inoculated low-carbon steels. Mater. Forum 1999, 23:77-104.
10. Barnett M.R., Jonas J.J. Influence of ferrite rolling temperature on microstructure and texture in deformed low C and IF steels. ISIJ International 1997, 37:697-705.
11. Barnett M.R., Jonas J.J. Influence of ferrite rolling temperature on grain size and texture in annealed low C and IF steels. ISIJ International 1997, 37:706-714.
12. Beals R., Duvvuri R., Tararglio B. Recent innovations in advanced casting technology. Light Metals 1998 1998, 1161-1167. TMS, USA. B. Welch (Ed.).
13. Beck J.V., Blackwell B., St Clair C.R. Inverse Heat Conduction: Ill-posed Problems 1985, John Wiley and Sons, New York, USA.
14. Bercovici S.J. Optimisation of 3C roll caster by automatic control. Light Metals 1985 1985, 1285-1299. TMS, New York, USA.
15. Beynon J.H., Gloss R., Hodgson P.D. The production of ultrafine equiaxed ferrite in a low carbon microalloyed steel by thermomechanical processing. Metals Forum 1992, 16:37-42.
16. Bhadeshia H.K.D.H. Bainite in Steels 2001, IoM Communications Inc, London, UK. 2nd edition.
17. Bhadeshia H.K.D.H., Svensson L.E. Modelling the evolution of microstructure in steel weld metal. Mathematical Modelling of Weld Phenomena 1993, 109-180. Institute of Metals, London, UK. H. Cerjak, K.E. Easterling (Eds.).
18. Biloni H., Boettinger W.J. Solidification. Physical Metallurgy 1996, Vol. I:669-842. Elsevier Science. R.W. Cahn, P. Haasen (Eds.).
19. Birat J.P., Steffen R. Current work on near-net-shape continuous casting technologies in Europe. Int. Conf. on New Smelting reduction and Near New Shape Casting Technologies for Steel, Phang, Korea 1990, 2:527-549.
20. Blazek K.E., Praeg W.F., Rachford J.G., Wang Y.H., Mohri M. Commercial-scale verification of the feasibility of electromagnetic edge containment for the twin roll strip casting of steel. Iron and Steelmaker 1998, 25:39-45.
21. Blejde W., Mahapatra R., Fukase H. Application of fundamental research at project 'M' 2000, 253-261. Iron and Steel Society, Warrendale, USA.
22. Blejde W., Mahapatra R., Fukase H. Development of low carbon thin strip production capability at project 'M'. Iron and steelmaker 2000, 27:29-33.
23. Bouchard D., Howes B., Paumelle C., Nadeau J.-P., Simard D., Hamel F. Control of heat transfer and growth uniformity of solidifying copper shells through substrate temperature. Metall. Mater. Trans B 2002, Vol. 33B:403-411.
24. Bower T.F., Brody H.D., Flemings M.C. Measurements of solute redistribution in dendritic solidification. Trans AIME 1966, 236:624-634.
25. Bradbury P.J., Hunt J.D. A coupled fluid flow, deformation and heat transfer model for a twin roll caster. Modelling of Casting, Welding and Advanced Solidification Processes VII 1995, 739-746. London, UK.
26. Bramfitt B.L. The effect of carbide and nitride additions on the heterogeneous nucleation behaviour of liquid iron. Metall. Trans 1969, 1:1970-1987.
27. Brimacombe J.K., Samarasekera I.V. The challenge of thin slab casting. Iron and Steelmaker 1994, 21:29-39.
28. Brimacombe J.K., Samarasekera I.V. The challenges of thin slab casting 1995, 33-53. Canadian Institute of Mining, Metallurgy and Petroleum, Canada. J.K. Brimacombe, I.V. Samarasekera (Eds.).
29. Brody H.D., Flemings M.C. Solute redistribution in dendritic solidification. Trans AIME 1966, 236:615-624.
30. Brooks J.A., Thompson A.W. Microstructural development and solidification cracking susceptibility of austenitic stainless steel welds. Int. Mater. Rev. 1991, 36:16-44.
31. Brooks C.R. Heat Treatment Structure and Properties of Non-Ferrous Alloys 1982, American Society for Metals, Metals Park, OH, USA.
32. Buchner A.R., Schmitz W. Thin strip casting of steel with a twin-roll caster: interpretation of the structure of approx 1 mm-Fe6%Si-strips. Euromat 91, Vol. 1 - Advanced Processing 1992, 109-114. Cambridge, UK.
33. Bunge H.J. Texture Analysis in Materials Science 1982, Butterworth Publishers, London, UK.
34. Burton J.A., Kolb E.D., Slichter W.P., Struthers J.D. Distribution of solute in crystals grown from the melt. J. Chem. Phys. 1953, 21:1991-1996.
35. Buxmann K., Gold E. Solidification conditions and microstructure in continuously cast aluminum. J. Metals 1982, 34:28-34.
36. Cabrera-Marrero J.M., Carreno-Galindo V., Morales R.D., Chavez-Alcala F. Macro-micro modeling of the dendritic microstructure of steel billets processed by continuous casting. ISIJ International 1998, 38:812-821.
37. Callister W.D. Materials Science and Engineering - An Introduction 1997, John Wiley and Sons, New York, USA. 4th edition.
38. Carlsson R., Kamf A., Sundberg R., Ostlund S. Vertical strip casting - material properties. Proc. Copper '90 - Refining, fabrication, markets 1990, 397-409. Institute of Metals, UK.
39. Castrip L.L.C. Website:. http://www.castrip.com.
40. Chadwick G.A. Metallography of Phase Transformations 1972, Butterworth Publishers, London, UK.
41. Chalmers B. Principles of Solidification 1967, John Wiley and Sons, New York, USA.
42. Chen G.Z., Fray D.J., Farthing T.W. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride. Nature 2000, 407:361-364.
43. Cheng X.M., Morris J.G. Texture, microstructure and formability of SC and DC cast Al-Mg alloys. Mater. Sci. Eng A 2002, Vol. A323:32-41.
44. Cheng X.M., Morris J.G. Tensile anisotropy of strip cast and direct chill cast 5182 aluminium alloy. Mater. Sci. Tech. 2002, 18:1413-1416.
45. Choi J.T., Kim Y.H., Choi C.H., Oh K.H., Ra H.Y. Microstructure evolution of AISI 430 stainless steel produced by twin roll strip casting. Proc. Int. Symp. on Melt Spinning, Strip Casting and Slab Casting 1996, 43-52. TMS, USA. E.F. Matthys, W.G. Truckner (Eds.).
46. Choo D-K., Lee S., Moon H-K., Kang T. Analysis and prevention of cracking during strip casting of AISI 304 stainless steel. Metall. Mater. Trans A 2002, Vol. 32A:2249-2258.
47. Christian J.W. The Theory of Transformations in Metals and Alloys - Parts I and II 2002, Pergamon, Oxford, UK. 3rd edition.
48. Clyne T.W., Kurz W. Solute redistribution during solidification with rapid solid-state diffusion. Metall. Trans A. 1981, Vol. 12A:965-971.
49. Collings E.W. The Physical Metallurgy of Titanium Alloys 1984, American Society for Metals, Metals Park, OH, USA.
50. Cordovilla C.G., Louis E. A differential scanning calorimetry study of recovery and recrystallization in a commercial Al-Fe-Si alloy (AA1145). Scripta Metall. 1984, 18:549-553.
51. Cossons N. The BP book of Industrial Archaeology 1987, David and Charles Publishers, UK. 2nd edition.
52. Couture A., Angers R., Krishnadev M.R., Es-Sadiqi E., Masounaves J. Strip-casting simulation of low carbon aluminium-killed steel. Canadian Inst. Mining Metall. 1992, 31:63-71.
53. Cramb A.W. New developments in the continuous casting of steel. Part II: Historical development - Bessemer to Hazelett. Iron and Steelmaker 1988, 15:42-44.
54. Cramb A.W. Strip casting of steels: current status and fundamental aspects 1995, 355-372. Canadian Institute of Mining, Metallurgy and Petroleum, Canada. J.K. Brimacombe, I.V. Samarasekera (Eds.).
55. Cramb A.W., Rollett A. Strip casting: anticipating new routes to steel sheet. Final Report - AISI/DOE Technology Roadmap Program 2001, 1-15. August 2001, No. DE-FC07-97ID13554.
56. Dalle F., Despert G., Vermaut Ph., Portier R., Dezellus A., Plaindoux P., Ochin P. Shape memory alloy strip production by the twin roll casting technique. Mater. Sci. Eng A 2003, Vol. A346:320-327.
57. Davey K., Rasgado M.T., Haga T., Izawa S., Watari H., Paisam R., Koga N. Semi-solid manufacturing process of magnesium alloys by twin-roll casting. J. Mater. Proc. Tech. 2004, Vol. 155-156:1662-1667.
58. Dean R.J. Operation of block caster system (Alusuisse Caster II) for coiled strip production. Aluminium Technology '86 1986, 164-172. London, UK.
59. Dieter G.E. Mechanical Metallurgy 1986, McGraw Hill, USA. 3rd edition.
60. Draskovic D., Mitrovic R. Mathematical model of "3C" aluminum strip continuous casting process. Yugoslav Int. Symp. on Aluminum. II - Working, Casting and Finalizing 1982, 229-243. Titograd, Yugoslavia.
61. Dündar M., Keles Ö., Kertj B., Doǧan N. Crystallographic texture development of twin-roll cast aluminium strips. Light Metals 2004 2004, 723-727. TMS, USA. A.T. Tabereaux (Ed.).
62. Edmonds D.V. Innovation in the processing of tonnage materials: examples from the steel and aluminium industries. J. Mater. Proc. Tech. 1998, 83:1-13.
63. Embury J.D. Microstructural aspects of formability. Formability and Metallurgical Structure 1987, 101-116. Orlando, Florida, USA. A.K. Sachdev, J.D. Embury (Eds.).
64. Emi T., Hiroyuki S. Direct observations of solidification and solid phase transformations. Solidification and Casting 2003, 298-325. Institute of Physics, UK. B. Cantor, K. O'Reilly (Eds.).
65. Emley E.F. Continuous casting of aluminium. Int. Metall. Rev. 1976, 206:75-115. Review No.
66. Esaka H., Kurz W., Trivedi R. Evolution of primary dendrite spacing in succinonitrile acetone alloys. Solidification Processing 1987 1988, 198-201. IoM, Sheffield, UK.
67. Esaka H., Suter F., Ogibayashi S. Influence of carbon content on the growth angle of steel dendrites in a flowing melt. ISIJ International 1996, 36:1264-1272.
68. Eskin D.G., Zuidema J., Savran V.I., Katgerman L. Structure formation and macrosegregation under different process conditions during DC casting. Mater. Sci. Eng A 2004, Vol. 384A:232-244.
69. Es-Sadiqi E., Blain J., Masounave J. Solidification structure of a strip-cast Al-Si-Cu alloy. Reduction and Casting of Aluminium 1988, 8:131-146. CIMM, Canada.
70. Es-Sadiqi E., Blain J., Mavropoulos L., Masounave J. Continuous casting and quality of aluminium alloys. Proc. Continuous Casting of Non-Ferrous Metals and Alloys 1989, 187-204. TMS, USA. H.D. Merchant, D.E. Tyler, E.H. Chia (Eds.).
71. Evans T., Strezov L. Interfacial heat transfer and nucleation of steel on metallic substrates. Metall. Mater. Trans B 2000, Vol. 31B:1081-1089.
72. Ferry M. Alloys: Iron. Encyclopedia of Condensed Matter Physics 2005, 46-53. Elsevier Science, Oxford, UK. F. Bassani, G. Liedl, P. Wyder (Eds.).
73. Ferry M., Page C. Microstructural control by secondary processing of strip-cast low carbon steel. Mater. Sci. Tech. 2001, 17:1369-1377.
74. Feurer U., Wunderlin R. Influence of the composition and solidification conditions on the dendrite morphology of binary aluminium alloys 1978, Dtsch. Ges. Metallkd. Fachber, 21.
75. Fiedler H., Muhlbach H., Stephani G. The effect of the main processing parameters on the geometry of amorphous metal ribbons during planar flow casting (PFC). J. Mater. Sci. 1984, 19:3229-3235.
76. Fitzel H.O., Steger P.L., Gstottenmayr A. Environmental engineering in continuous casting. Iron and Steel Engineer 1999, 76:32-34.
77. Flemings M.C. Solidification Processing 1974, McGraw Hill, USA.
78. Flemings M.C., Poirier D.R., Barone R.V., Brody H.D. Microsegregation in iron-base alloys. J. Iron Steel Inst. 1970, 208:371-379.
79. Flemming G., Kappes P., Rohde W., Vogtmann L. Rolling of continuously cast strips and the technical consequences with respect to the design of hot strip production plants. Stahl und Eisen. 1988, 108:25-35.
80. Fournier P., Platon F. Wear of refractory ceramics against nickel. Wear 2000, 244:118-125.
81. Fray D.J., Chen G.Z. Extraction of titanium from solid titanium dioxide in molten salts 2004, 9-17.
82. Fujita Y., Sato H., Kitagawa T., Nishioka S.I., Tsuchida Y., Ozeki A. Solidification and roll-bonding of shells in twin-roll casting process. ISIJ International 1989, 29:495-502.
83. Furrer P. Continuous casting and quality of aluminium alloys. Proc. Continuous Casting of Non-Ferrous Metals and Alloys 1989, 87-106. TMS, USA. H.D. Merchant, D.E. Tyler, E.H. Chia (Eds.).
84. Gallerneault M., Lloyd D.J. Strip casting and processing of Al-Mg alloys for automotive structural applications. Mater. Sci. Forum 2002, Vol. 396-402:95-100.
85. Gaspar T.A., Hackman L.E. Melt overflow process for direct cast fiber, ribbon and strip. Mater Sci. Eng A 1991, Vol. A133:676-679.
86. Gaspar T.A., Hackman L.E., Batawi E., Peters J.A. Effects of thermomechanical processing on titanium aluminide strip cast by the melt overflow process. Mater Sci. Eng A 1994, Vol. A179/180:645-648.
87. Girgensohn A., Buchner A.R., Tacke K.-T. Twin roll strip casting of low carbon steels. Ironmaking and Steelmaking 2000, 27:317-323.
88. Gránásy L., Ludwig A. Heat transfer in the single roller quenching methods. Mater. Sci. Eng A 1991, Vol. A133:751-754.
89. Gras Ch., Meredith M., Hunt J.D. Microstructure and texture evolution after twin roll casting and subsequent cold rolling of Al-Mg-Mn aluminium alloys. J. Mater. Proc. Tech. 2005, 169:156-163.
90. Greer L. Control of grain size in solidification. Solidification and Casting 2003, 199-247. Institute of Physics, UK. B. Cantor, K. O'Reilly (Eds.).
91. Gregg J.M., Bhadeshia H.K.D.H. Solid-state nucleation of acicular ferrite in minerals added to molten steel. Acta Mater. 1997, 45:739-748.
92. Gröng Ø. Metallurgical Modelling of Welding 1994, Institute of Materials, London, UK.
93. Grosjean J.C., Jacquot J.L., Damasse J.M., Littersheidt H., Senk D., Schmitz W. Thin strip casting experiments at Irsid and Thyssen Stahl AG. Iron and Steelmaker 1993, 20:27-32.
94. Guillet A., Es-Sadiqi E., L'Esperance G.L., Hamel F.G. Microstructure and mechanical properties of strip cast 1008 steel after simulated coiling, cold rolling and batch annealing. ISIJ International 1996, 36:1190-1198.
95. Gunji Y., Yasumoto K., Tomita T. Fundamentals and applications of rapid solidification processes. Trans ISIJ. 1989, 29:59-66.
96. Guthrie R.I.L., Tavares R.P. Mathematical and physical modelling of steel flow and solidification in twin-roll/horizontal belt thin-strip casting machines. Appl. Math. Modelling 1998, 22:851-872.
97. Guthrie R.I.L., Isac M. Steel strips in the context of near net shape casting production. Steel Research 1999, 70:343-348.
98. Guthrie R.I.L., Isac M., Kim J.S., Tavares R.P. Measurements, simulations and analyses of instantaneous heat fluxes from solidifying steels to the surfaces of twin roll casters and of aluminium to plasma-coated metal substrates. Metall. Mater. Trans B 2000, Vol. 31B:1031-1047.
99. Ha M., Choi J., Jeong S., Moon H., Lee S., Kang T. Analysis and prevention of microcracking phenomenon during strip casting of AISI 304 stainless steel. Metall. Mater. Trans A 2001, Vol. 33A:1487-1497.
100. Haga T., Suzuki S. A twin-roll caster to cast clad strip. J. Mater. Proc. Tech. 2003, 138:366-371.
101. Hamilton L.T. Continuous casting of steel: an update. Mater. Forum. 1991, 15:205-216.
102. Hammerton R.H. The continuous casting of steel. Applied Science in the Casting of Metals 1970, 133-158. Pergamon Press, UK. K. Strauss (Ed.).
103. Han J.-H., Seok H.-K., Chung Y.-H., shin M.-C., Lee J.-C. Texture evolution of strip cast 1050 Al alloy processed by continuous confined strip shearing and its formability evaluation. Mater. Sci. Eng A 2002, A323:342-347.
104. Hatherly M., Hutchinson W.B. An Introduction to Textures in Metals 1979, Institute of Metals, London, UK, Monograph no. 5.
105. Hazelett (Strip Casting Corporation) Website. http://www.hazelett.com.
106. Hazelett D.N., Szczypiorski W.S. The Hazelett strip-casting process for aluminium packaging applications. Aluminium 2003, 79:966-968.
107. Hazelett W. The present status of continuous casting between moving flexible belts. Iron Steel Eng 1966, 43:105-110.
108. Held J.F. Relationship between r-values and structure and properties of steel sheets. Mechanical Working and Steel Processing IV 1969, 3-38. Gordon and Breach Publishers Inc, New York, USA. D.A. Edgecombe (Ed.).
109. Hendricks C. Strip casting technology - A revolution in the steel industry?. MPT International 1995, 18(3):42-49.
110. Henry S., Minghetti T., Rappaz M. Dendrite morphologies in aluminium alloys. Acta Mater. 1998, 46:6431-6443.
111. Hickson M.R., Hodgson P.D. Effect of pre-roll quenching and post-roll quenching on production and properties of ultrafine ferrite in steel. Mater. Sci. Tech. 1999, 15:85-90.
112. Hirsch J., Lücke K. Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals. I. Description of rolling texture development in homogeneous CuZn alloys. Acta Metall. 1988, 36:2863-2882.
113. Hitchcock S.J., Carroll N.T., Nicholas M.G. Some effects of substrate roughness on wettability. J. Mat. Sci. 1981, 16:714-732.
114. Hodgson P.D., Hickson M., Gibbs R.K. Ultrafine ferrite in low carbon steel. Scripta Mater. 1999, 40:1179-1184.
115. Holman J.P. Heat Transfer 2002, McGraw Hill, USA. 5th edition.
116. Honeycombe R.W.K., Bhadeshia H.K.D.H. Steels - Microstructure and Properties 1995, Edward Arnold, London, UK. 2nd edition.
117. Humphreys F.J., Hatherly M. Recrystallization and Related Annealing Phenomena 2004, Elsevier Science, Oxford, UK. 2nd edition.
118. Hunt J.D. Cellular and primary dendrite spacings. Solidification and Casting of Metals 1979, 3-9. TMS, Sheffield, UK, book 192.
119. Hunter A., Ferry M. Evolution of microstructure and texture during casting of AISI 304 stainless steel strip. Metall. Mater. Trans A 2002, Vol. 33A:3747-3754.
120. Hunter A., Ferry M. Texture enhancement by inoculation during direct casting of ferritic stainless steel strip. Metall. Mater. Trans A 2002, Vol. 33A:1499-1507.
121. Hunter A., Ferry M. Comparative study of texture development in strip-cast ferritic and austenitic stainless steels. Scripta Mater. 2002, 47:349-355.
122. Hunter A., Ferry M. Phase formation during solidification of AISI 304 austenitic stainless steel. Scripta Mater. 2002, 46:253-258.
123. Hurley P.J., Hodgson P.D., Muddle B.C. Analysis and characterisation of ultra-fine ferrite produced during a new steel strip rolling process. Scripta Mater. 1999, 40:433-438.
124. Hutchinson W.B. Development and control of annealing textures in low-carbon steels. Int. Met. Rev. 1984, 29:25-42.
125. Hutchinson W.B., Nilsson K-I., Hirsch J. Annealing textures in ultra-low carbon steels. Metallurgy of Vacuum-Degassed Steel Products 1990, 109-125. TMS-AIME, Warrendale, USA. R. Pradhan (Ed.).
126. 2 1997, 145-161. The Swedish Society for Materials Technology, Stockholm, Sweden. Hutchinson (Ed.).
127. Inoue H., Inakazu N. Deformation and recrystallization textures in cold rolled titanium 1988, 997-1004.
128. Iricibar R., Jin I. Rolling aspects of twin roll casting, Light Metals 1984 1984, 1129-1144. Los Angeles, California, TMS, USA.
129. Jang J.S.C., Tsai H.Y., Tsau C.H., Chen C.J. Factors affecting the properties of rapidly solidified Fe-6.5 wt.% Si alloy in the melt-spinning method. Proc. Int. Symp. on Melt Spinning, and Strip Casting: Research and Implementation 1992, 95-106. TMS, USA. E.F. Matthys (Ed.).
130. Jarrett M., Neilson B., Manson-Whitton E. Direct chill casting of aluminium alloys. Solidification and Casting 2003, 3-25. Institute of Physics, UK. B. Cantor, K. O'Reilly (Eds.).
131. Jeong S.I., Ha M., Choi J.T., Chung H.T., Kim S.H. Control of morphology and contents of retained delta ferrite for 304 stainless steel as-cast strip by twin-roll strip casting process. RIST Journal of R&D. 1999, 13:411-417.
132. Jiles D.C. Recent advances and future directions in magnetic materials. Acta Mater. 2003, 51:5907-5939.
133. Jonker J. Direct strip casting of AISI 430 stainless steel 2000, University of New South Wales, BEng Thesis.
134. Kasama A., Mizoguchi S., Miyazawa K., Ito M., Sugai T. A consideration on the rapid solidification of steels - Solidification by twin roll caster. Near Net Shape Casting 1987, 59-64. Iron and Steel Society, Warrendale, USA. P.H. Dauby (Ed.).
135. Katgerman L. Rapid quenching strip casting processes. Proc. Continuous Casting of Non-Ferrous Metals and Alloys 1989, 67-86. TMS, USA. H.D. Merchant, D.E. Tyler, E.H. Chia (Eds.).
136. Kattamis T.Z., Flemings M.C. Dendrite morphology microsegregation and homogenisation of low-alloy steel. Trans AIME 1965, 233:992-1001.
137. Kawakami K., Inagaki J.-I., Nishioka S.-I. Research on twin-roll casting process. Near Net Shape Casting 1987, 71-80. Iron and Steel Society, Warrendale, USA. P.H. Dauby (Ed.).
138. Kawakami K. Metallurgical research and development of hot direct rolling and hot charge rolling processes. Tetsu-to-Hagane 1988, 74:1203-1209.
139. Kim S.K., Cho H., Lee J.-K., Kim W.-Y., Jo H.-H. Development of strip casting process for electrolytic tough pitch copper. Mater. Sci. Forum 2005, 486-487:456-459.
140. Kim S., Jeong S. Delta ferrite effects on post-treatments of AISI 304 stainless steel produced by strip casting process 2001, 617-626. Iron and Steel Society, Warrendale, USA.
141. Kim S.H., Moon H.K., Kang T., Lee C.S. Dissolution kinetics of delta ferrite in AISI 304 stainless steel produced by strip casting process. Mater. Sci. Eng A 2003, Vol. A356:390-398.
142. Kluken A.O., Gröng Ø., Hjelen J. The origin of transformation textures in steel weld metals containing acicular ferrite. Metall. Trans A 1991, Vol. 22A:657-663.
143. Kopp R., Hagemann F., Hentschel L., Schmitz J.W., Senk D. Thin-strip casting - modelling of combined casting/metal-forming process. J. Mater. Proc. Tech. 1998, Vol. 80-81:458-462.
144. Korchynsky M. New steels for new mills. Scand. J. Metall. 1999, 28:40-45.
145. Korzekwa D.R., Jacobson L.A., Hirt C.W. Modelling planar flow casting with flow-3D. Proc. Int. Symp. on Melt Spinning, and Strip Casting: Research and Implementation 1992, 107-122. TMS, USA. E.F. Matthys (Ed.).
146. Krishnadev M.R., Berrada S., Couture A., Angers R. Influence of alloying and processing on properties of direct-cast steels. Proc. Int. Symp. on Melt Spinning, and Strip Casting: Research and Implementation 1992, 123-146. TMS, USA. E.F. Matthys (Ed.).
147. Kruger D., Streubel H. CPR - A combined casting/rolling process for producing strip. AISE Steel Technology 1995, 72:31-36.
148. Kumar T.S.P., Prabhu K.N. Heat flux transients at the casting/chill interface during solidification of aluminum base alloys. Metall. Trans B 1991, Vol. 22B:717-727.
149. Kurz W., Fisher D.J. Dendrite growth at the limit of stability: tip radius and spacing. Acta Metall. 1981, 29:11-20.
150. Kurz W., Fisher D.J. Fundamentals of Solidification 1989, Trans. Tech. Publications, Switzerland. 3rd edition.
151. Landgraf F.J.G., Yonamine T., Takanohashi R., Silva F.Q., Tosetti J.P.V., Neto F.B., Albertin E., Mazzarella V.N.G., Falleiros I.G.S., Emura M. Magnetic properties of silicon steel with as-cast columnar structure. J. Magnetism and Magnetic Materials. 2003, Vol. 254-255:364-366.
152. Lee K.S., Shin Y.C., Oh K.H., Ra H.Y. Effect of lanthanum (La) on the oxidation behaviour in the rapidly solidified Fe-20Cr-5Al-xLa alloy. Proc. Int. Symp. on Melt Spinning, Strip Casting and Slab Casting 1996, 113-124. TMS, USA. E.F. Matthys, W.G. Truckner (Eds.).
153. Lee H.-L. EBSD characterisation of stainless steels 2002, University of New South Wales, MEng Thesis.
154. Legrand H., Vendeville L., Damasse J.-M., Espenhahn M., Simon R.W., Stebner G. An update on Myosotis 1997, 2287-2293. TMS, USA. T. Chandra, T. Sakai (Eds.).
155. Leslie W.C. The Physical Metallurgy of Steels 1981, McGraw Hill, London, UK. 1st edition.
156. Li B.Q. Producing thin strips by twin-roll casting - Part I: Process aspects and quality issues. JOM, TMS, USA 1995, 47(5):29-33.
157. Li B.Q. Producing thin strips by twin-roll casting - Part II: Process modelling and development. JOM, TMS, USA 1995, 47(5):13-17.
158. Liang D., Cowley C.B. The twin-roll strip casting of magnesium. JOM, TMS, USA 2004, 56:26-28.
159. Liebermann H.H. Sample preparation: methods and process characterization. Amorphous Metallic Alloys 1983, 26-41. Butterworth Publishers, London, UK. F.E. Luborsky (Ed.).
160. Lindenberg H.-U., Bruckner G., Tacke K.-H. Strip properties and processing in twin roll casting of stainless and low carbon steels. Steel Research 2001, 72:490-495.
161. Liu J., Morris J.G. Recrystallization microstructures and textures in AA 5052 continuous cast and direct chill cast aluminum alloys. Mater. Sci. Eng. A 2004, Vol. A385:342-351.
162. Liu W.C., Morris J.G. Comparison of the texture evolution in cold rolled DC and SC AA5182 aluminium alloys. Mater. Sci. Eng A 2003, Vol. A339:183-193.
163. Liu W.C., Man C.-S., Raabe D., Morris J.G. Effect of hot and cold deformation on the recrystallization texture of continuous cast AA 5052 aluminium alloy. Scripta Mater. 2005, 53:1273-1277.
164. Llewellyn D.T. Steels - Metallurgy and Applications 1994, Butterworth-Heinemann Ltd, Oxford, UK. 2nd edition.
165. Lockyer S.A., Yun M., Hunt J.D., Edmonds D.V. Micro- and macrodefects in thin sheet twin-roll cast aluminium alloys. Mater. Charact. 1996, 37:301-310.
166. Löser W., Thiem S., Jurisch M. Solidification modelling of microstructures in near-net-shape casting of steels. Mater. Sci. Eng A 1993, Vol. A173:323-326.
167. Loulou T., Artyukhin E.A., Bardon J.P. Estimation of thermal contact resistance during the first stages of metal solidification process II - experimental setup and results. Int. J. Heat Mass Transfer 1999, 42:2129-2142.
168. Luiten E.M., Blok K. Stimulating R&D of industrial energy-efficient technology; the effect of government intervention on the development of strip casting technology. Energy Policy 2001, 31:1339-1356.
169. McHenry M.E., Laughlin D.E. Nano-scale materials development for future magnetic applications. Acta Mater. 2000, 48:223-238.
170. McHugh K.M., Delplanque J.-P., Johnson S.B., Lavernia E.J., Zhou Y., Lin Y. Spray rolling of aluminium alloy strip. Mater. Sci. Eng A 2004, Vol. 383A:96-106.
171. McKenzie J.K. 2nd paper on statistics associated with the random disorientation of cubes. Biometrika 1958, 45:229-240.
172. Mahulikar D. Homogenisation of cast structures in copper based alloys. Homogenisation and Annealing of Aluminum and Copper Alloys 1988, 53-72. TMS, USA. H.D. Merchant, J. Crane, E.H. Chia (Eds.).
173. Manohar P.A., Ferry M., Hunter A. Direct strip casting of steel - historical perspective and future direction. Mater. Forum 2000, 24:15-32.
174. Matsumura Y., Yada H. Evolution of ultrafine-grained ferrite in hot successive deformation. Trans ISIJ 1987, 27:492-498.
175. Menet P.-Y., Cayol R., Moriceau J. Pechiney JUMBO 3CM(tm) start-up of the Neuf-Brisach thin strip caster. Light Metals 1997 1997, 753-756. TMS, USA. R. Huglen (Ed.).
176. Menet P.-Y., Bosch M., Basson F., Maiwald K. Strip casting technology.... a key to product quality. Aluminium World. 2001, 2(1):58-60.
177. Merchant H.D., Kattamis T.Z., Scharf G. Homogenisation of aluminum alloys. Homogenisation and Annealing of Aluminum and Copper Alloys 1988, 1-52. TMS, USA. H.D. Merchant, J. Crane, E.H. Chia (Eds.).
178. Merchant H.D., Kattamis T.Z., Morris J.G. Continuous casting of aluminium alloys. Proc. Continuous Casting of Non-Ferrous Metals and Alloys 1989, 1-66. TMS, USA. H.D. Merchant, D.E. Tyler, E.H. Chia (Eds.).
179. Miki I., Kosuge H., Nagahama H. Supersaturation and decomposition of Al-Fe alloys during solidification. J. Japan. Inst. Light Metals 1975, 25:1-9.
180. Minkoff I. Solidification and Cast Structure 1986, John Wiley and Sons, New York, USA.
181. Miyazawa K., Mizoguchi T., Ueshima Y., Mizoguchi S. The fundamental phenomena determining strip quality in twin-roll casting process. Proc. Int. Conf. on New Smelting Reduction and Near-Net-Shape Casting Technologies for Steel, Pohang, Korea 1990, 2:745-750.
182. st European Conf. Advanced Materials and Processes 1989, 1:93-98.
183. Mizoguchi T., Miyazawa K.-I. Formation of solidification structure in twin roll casting process of 18Cr-8Ni stainless steel. ISIJ International 1995, 35:771-777.
184. Mizoguchi T., Miyazawa K., Ueshima Y. Relation between surface quality of cast strips and meniscus profile of molten pool in the twin roll casting process. ISIJ International 1996, 36:417-423.
185. Mizukami H., Nagakura Y., Kusakawa T. Effect of surface active elements in the initial solidification structure of stainless steel ingot. Tetsu-to-Hagane 1989, 75:1308-1315.
186. Mizukami H., Suzuki T., Umeda T. Control of initial solidification of rapidly solidified 18Cr-8Ni stainless steel. Tetsu-to-Hagane 1992, 78(8):1369-1376.
187. Moon H.-K., Choo D.-K., Kang T., Kim K.-S. The status of twin roll strip casting process for steel strip in POSCO/RIST 2002, 499-508.
188. Mondolfo L.F. Aluminium Alloys: Structure and Properties 1976, Butterworth Publishers, London, UK.
189. Moritz G. Continuous casting in stationary moulds. Z. Metallkunde. 1969, 60:694-698.
190. Morris L.R., Winegard W.C. Segregation and morphology of cells during freezing. J. Inst. Metals 1969, 97:220-222.
191. Kim S., Jeong S., Mukunthan K., Strezov L., Mahapatra R., Blejde W. Evolution of microstructures and product opportunities in low carbon steel strip casting 2000, 421-437. Vancouver, Canada. L.V. Samarasekera (Ed.).
192. Mukunthan K., De Sylva F., Strezov L., Herbertson J. Evolution of microstructures during solidification of 304 austenitic stainless steel. la Metallurgica Italiana 2002, 94:39-46.
193. Müller C. Continuous copper casting of pre-rolled strips and rolled starter sheets 2003, 199-203. Canadian Institute of Mining, Metallurgy and Petroleum. J.E. Dutrizac, C.G. Clement (Eds.).
194. Mullins W.W., Sekerka R.F. Morphological stability of a particle growing by diffusion or heat flow. J. Appl. Phys 1963, 34:323-329.
195. Mullins W.W., Sekerka R.F. Stability of planar interface during solidification of dilute binary alloy. J. Appl. Phys 1964, 35:444-451.
196. Munitz A. Microstructure of rapidly solidified laser molten A1-4.5 wt. pct Cu surfaces. Metall. Trans B 1985, Vol. 16B:149-161.
197. Naess S.E. The effect of processing on the bending properties of strip-cast Al-Mn alloys. Proc. Continuous Casting of Non-Ferrous Metals and Alloys 1989, 205-226. TMS, USA. H.D. Merchant, D.E. Tyler, E.H. Chia (Eds.).
198. Nes E., Slevolden S. Casting and annealing structures in strip cast aluminium alloys. Aluminium 1979, 55:319-324.
199. Odok A., Thym G. Technical and economic advantages and disadvantages of continuous strip casting. Aluminium 1974, 50:454-456.
200. Ogino K., Nogi K., Yamase O. Effects of selenium and tellurium on the surface tension of molten iron and the wettability of alumina by molten iron. Trans ISIJ 1983, 23:234-239.
201. Okamoto A. Textures of strip-cast, direct cold-rolled and annealed sheet steels 1988, 891-896.
202. Ozbayraktar S., Koursaris A. Effect of superheat on the solidification structures of AISI 310S austenitic stainless steel Metall. Mater. Trans B 1996, Vol. 27B:287-296.
203. Ozturk B., Matway R., Fruehan R.J. Thermodynamics of inclusion formation in Fe-Cr-Ti-N alloys. Metall. Mater. Trans B 1995, Vol. 26B:563-567.
204. Page C. Thermomechanical processing of low-carbon steel 1997, University of Wollongong, BEng Thesis.
205. Park J.Y., Oh K.H., Ra H.Y. The effects of superheating on texture and microstructure of Fe-4.5 wt.% Si steel strip by twin-roll strip casting. ISIJ International 2001, 41:70-75.
206. Park J.Y., Choi J.T., Kang T., Oh K.H., Szpunar J.A. Microstructure and texture analysis in twin-roll cast Fe-36wt.% Ni alloy. Mater. Sci. Forum 2002, 408-412:827-832.
207. Park S.S., Lee J.G., Park Y.S., Kim N.J. Fabrication of Mg alloy strips by strip casting. Mater. Sci. Forum 2003, 419-422:599-604.
208. Park S.S., Kim Y.M., Kang D.H., Kim N.J. Development of Mg alloy sheets via strip casting. Mater. Sci. Forum 2005, 475-479:45-50.
209. Polmear I.J. Light Alloys 1995, Arnold, UK. 3rd edition.
210. Pond R.J.R., Maddin R. Method of producing rapidly solidified filamentary castings. Trans AIME 1969, 245:2475-2476.
211. Porter D.A., Easterling K.E. Phase Transformations in Metals and Alloys 1992, Chapman and Hall, London, UK. 2nd edition.
212. Prates M., Biloni H. Variables affecting the nature of the chill zone. Metall. Trans 1972, 3:1501-1510.
213. Pryds N.H., Huang X. The effect of cooling rate on the microstructures formed during solidification of ferritic steel. Metall. Mater. Trans A 2000, Vol. 31A:3155-3166.
214. Raabe D., Holsher F., Lucke K. Textures of strip-cast Fel6%Cr. Scripta Metall. Mater. A 1993, 29:113-116.
215. Raabe D. Microstructure and crystallographic texture of strip-cast and hot-rolled austenitic stainless steel. Metall. Mater. Trans A 1995, Vol. 26A:991-998.
216. Raabe D. Textures of strip-cast and hot-rolled ferritic and austenitic stainless steels. Mater. Sci. Tech. 1995, 11:461-467.
217. Raabe D. Texture and microstructure evolution during cold rolling of strip-cast and a hot-rolled austenitic stainless steel. Acta Mater. 1997, 45:1137-1151.
218. Radonjic B., Furrer P., Podgornick A. Crystal growth rate anisotropy and cast aluminum texture 1982, 215-228.
219. Randle V., Engler O. Introduction to Texture Analysis - Macrotexture, Microtexture and Orientation Mapping 2000, Gordon and Breach, Netherlands.
220. Rappaz M., Gandin Ch.-A. Probabilistic modelling of microstructure formation in solidification processes. Acta Metall. Mater. 1993, 41:345-360.
221. Ray R.K., Jonas J.J. Transformation textures in steels. Int. Mater. Rev. 1990, 35:1-36.
222. Ray R.K., Jonas J.J., Hook R.E. Cold rolling and annealing textures in low carbon and extra low carbon steels. Int. Mater. Rev. 1994, 39:129-172.
223. Reichelt W. The Mannesmann Demag view of the near net shape flat production 1997, 2159-2168. TMS, USA. T. Chandra, T. Sakai (Eds.).
224. Renschen P.D., Lewis B.G. Structure - Hot processability in copper base alloy casting. Proc. Continuous Casting of Non-Ferrous Metals and Alloys 1989, 107-118. TMS, USA. H.D. Merchant, D.E. Tyler, E.H. Chia (Eds.).
225. Reszetko-Orlionnet V., Bigot J. The influence of casting gauge on the Hunter roll casting process. Proc. Int. Symp. on Melt Spinning, and Strip Casting: Research and Implementation 1992, 201-212. TMS, USA. E.F. Matthys (Ed.).
226. Roadman R.E., Berman H.M., Lalli L.A. Application of a viscoplastic finite element model to the roll casting process. Aluminium. 1984, 60:911-914.
227. Rollett A.D., Wright S.I. Chapter 5 - Typical textures in metals. Texture and Anisotropy 1998, Cambridge University Press. U.F. Kocks, C.N. Tomé, H.R. Wenk (Eds.).
228. Sahai Y., Saxena A. Modeling of twin-roll thin strip casting of aluminium alloys. Light Metals 2002 2002, 643-650. TMS, USA. W. Schneider (Ed.).
229. Sarioglu K., Thevoz P. Simulation of solidification process used in twin roll casting. Light Metals 2003 2003, 747-751. TMS, USA. P.N. Crepeau (Ed.).
230. Sasiain A.G. Grain stability during thermal processing of low carbon steel 1998, University of Wollongong, MEng Thesis.
231. Schumacher P. Heterogeneous nucleation in aluminium alloys. Solidification and Casting 2003, 177-198. Institute of Physics, UK. B. Cantor, K. O'Reilly (Eds.).
232. Shiang L.-T., Wray P.J. Microstructures of strip-cast low-carbon steels and their response to thermal processing. Metall. Trans A. 1989, Vol. 20A:1191-1198.
233. Shiang L.-T., Wray P.J. Microstructural study of a continuously-annealed strip-cast low carbon steel. Scripta Metall. Mater. 1991, 25:143-148.
234. Shibuya K., Ozawa M. Strip casting techniques for steel. ISIJ International 1991, 31:661-668.
235. Shrewe H.F. Continuous Casting of Steel - Fundamental Principles and Practice 1989, Verlag Stahleisen mbH, Dusseldorf, Germany.
236. Sinha A.K. Ferrous Physical Metallurgy 1989, Butterworth Publishers, Boston, USA.
237. Spear R.E., Gardner G.R. Trans AFS 1963, 71:209-215.
238. Strezov L., Herbertson J. Experimental studies of interfacial heat transfer and initial solidification pertinent to strip casting. ISIJ International 1998, 38:959-966.
239. Strezov L., Herbertson J., Belton G.R. Mechanisms of initial melt/substrate heat transfer pertinent to strip casting. Metall. Mater. Trans B 2000, Vol. 31B:1023-1030.
240. Sugiyama M., Umeda T., Matsuyama J. Microsegregation and microstructure in 18Cr-8Ni and 25Cr-20Ni austenitic stainless steels. Tetsu-to-Hagane 1974, 60:1094-1113.
241. Suzuki A., Suzuki T., Nagaoka Y., Iwata Y. On secondary dendrite arm spacing in commercial steels having different carbon contents. Nippon Kinzoku Gakkai-Si 1968, 32:1301-1305.
242. Takatani H., Gandin Ch.-A., Rappaz M. EBSD characterisation and modelling of columnar grains growing in the presence of fluid flow. Acta Mater. 2000, 48:675-688.
243. Takuda H., Kikuchi S., Hatta N., Kokado J.I. Metallographic observations of stainless steel sheets produced by twin-roll type strip caster. Steel Research 1991, 62:346-350.
244. Takuda H., Kikuchi S., Hatta N., Kokado J.I. Mechanical properties of type 304 stainless steel sheet produced by twin-roll strip casting process. Steel Research 1993, 64:132-135.
245. Thoma D.J., Schwartz E.M., Bingert S.R., Korzekwa D.R., Field R.D., Jacobson L.A. Microsegregation during melt-spinning of dilute palladium alloys. Proc. Int. Symp. on Melt Spinning, Strip Casting and Slab Casting 1996, 173-184. TMS, USA. E.F. Matthys, W.G. Truckner (Eds.).
246. Thomas P. Continuous casting of aluminium alloys. Solidification and Casting 2003, 26-47. Institute of Physics, UK. B. Cantor, K. O'Reilly (Eds.).
247. Tiller W.A., Jackson K.A., Rutter J.W., Chalmers B. The redistribution of solute atoms during the solidification of metals. Acta Metall. 1953, 1:428-437.
248. Todoroki H., Lertarom R., Suzuki T., Cramb A.W. Solidification and heat transfer behavior of AISI 304 stainless steel 1997, Vol. II:2227-2236. TMS. T. Chandra, T. Sakai (Eds.).
249. Todoroki H., Lertarom R., Cramb A.W. Strip casting fundamentals. Centre for Iron and Steel Research (CISR) Progress Report 1998, Carnegie Mellon University.
250. Tozawa S., Moriwaki N., Yusukawa T., Fujii T., Koshikawa T., Kimura T. Development of thin slab caster. Kawasaki Steel Tech. 1990, 22-31. Report No. 22.
251. Trivedi R., Kurz W. Morphological stability of a planar interface under rapid solidification conditions. Acta Metall. 1986, 34:1663-1670.
252. Ushijima K., Okazaki T., Yoshihara M., Shiode S., Koide M. Thin steel slab continuous casting process. Near Net Shape Casting 1987, 31-36. Iron and Steel Society, Warrendale, USA. P.H. Dauby (Ed.).
253. Vangala P., Smith D., Duvvuri R., Romanowski C. The influence of casting gauge on the Hunter roll casting process. Proc. Int. Symp. on Melt Spinning, and Strip Casting: Research and Implementation 1992, 225-262. TMS, USA. E.F. Matthys (Ed.).
254. van Rooijen M., van der Pers N.M., van der Hoeven J.A., Katgerman K., de Keijser Th.H., Mittemeijer E.J. Relation between solidification morphology and texture of melt spun Al alloys. Rapidly Quenched Metals V 1985, Vol. II:823-828. Elsevier science. S. Steeb, H. Warlimont (Eds.).
255. Walton D., Chalmers B. The origin of the preferred orientation in the columnar zone of ingots. Trans AIME 1959, 215:447-456.
256. Wang G.-X., Matthys E.F. Interfacial thermal contact during rapid solidification on a substrate. Heat Transfer 1994, IChem Publishers 1994, 4:169-174.
257. Wang G.-X., Matthys E.F. On the heat transfer at the interface between a solidifying metal and a solid substrate. Proc. Int. Symp. on Melt Spinning, Strip Casting and Slab Casting 1996, 205-236. TMS, USA. E.F. Matthys, W.G. Truckner (Eds.).
258. Wang G.-X., Matthys E.F. Experimental determination of the interfacial heat transfer during cooling and solidification of molten metal droplets impacting on a metallic substrate: effect of roughness and superheat. Int. J. Heat Mass Transfer 2002, 45:4967-4981.
259. Watari H., Paisarn R., Koga N., Haga T., Davey K., Rasgado M.T.A. Forming Characteristics of cast magnesium alloy sheets manufactured by roll strip casting process. Key Eng. Mater. 2004, Vol. 274-276:379-384.
260. Watari H., Koga N., Paisarn R., Haga T. Formability of magnesium alloy sheets manufactured by semi-solid roll strip casting. Mater. Sci. Forum 2004, Vol. 449-452:181-184.
261. Weaver M.L., Garmestani H. Microstructures and mechanical properties of commercial titanium foils via melt overflow process. Mater. Sci. Eng A 1998, Vol. A247:229-238.
262. Westengen H., Nes K. Twin roll casting of aluminum: the occurrence of structure inhomogeneities and defects in as-cast strip. Light Metals 1984 1984, 1111-1127. TMS, Los Angeles, USA.
263. Whittington K.R., Davidson P.A., Hunt J., Yun M., Thomas P. Electromagnetic edge dams for twin-roll casting. Light Metals 1998 1998, 1147-1150. TMS, USA. E. Welch (Ed.).
264. Wolf M.M. Strand surface quality of austenitic stainless-steels. 2. Microscopic solidification structure. Ironmaking and Steelmaking 1986, 13:258-262.
265. Wolf M.M. Historical perspectives on continuous casting in the minimills 1995, 3-22. Canadian Institute of Mining, Metallurgy and Petroleum, Canada. Brimacombe, Samarasekera (Eds.).
266. Wolf M.M. Henry Bessemer and continuous casting. Revue de Metallurgie, Cahiers d'informations Techniques 2001, 98:63-73.
267. Xu W. Influence of initial microstructure on recrystallization behaviour of low carbon steel 2006, University of New South Wales, PhD Thesis.
268. Yasunaka H., Taniguchi K., Kokita M., Inoue T. Surface quality of stainless steel type 304 cast by twin-roll type strip caster. ISIJ International 1995, 35:784-789.
269. Yu X.F., Zhai T., Cheng X.M., Wen X.Y., Liu J.T., Liu W.C., Chen J., Morris J.G. Microstructure evolution and mechanical anisotropy of strip cast and direct chill cast AA5182 aluminum alloy. Mater. Sci. Forum 2002, Vol. 396-402:101-106.
270. Yukumoto M., Yamane H. Thin strip casting of nickel base alloys by twin roll process. ISIJ International 1995, 35:778-783.
271. Zapuskalov N.M. Structure formation of rapidly solidified Fe-Si steel strip in twin roll casting. Int. J. Cast Metals Research 1996, 9:153-156.
272. Zapuskalov N. Comparison of strip casting with conventional technology. ISIJ International 2003, 43:1115-1127.
273. Zapuskalov N., Vereschagin M. Wear of roll surface in twin-roll casting of 4.5% Si steel strip. ISIJ International 2000, 40:589-596.
274. Zhao Y.M., Liu W.C., Morris J.G. Quantitative analysis of texture, evolution and formability of cold-rolled direct-chill-cast and continuous-cast AA5052 and AA5182 aluminium alloys during isothermal annealing. Metall. Mater. Trans A 2004, Vol. 35A:3613-3629.
275. Zhou S.X., Zhong J., Mao D., Funke P. Experimental study on material properties of hot rolled and continuously cast aluminium strips in cold rolling. J. Mater. Proc. Tech. 2003, 134:363-373.