Texture and microstructure evolution during cold rolling of a strip cast and of a hot rolled austenitic stainless steel

Acta Materialia

Volumn 45, Issue 3, 1997, Pages 1137-1151

  Raabe, D ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

COLD ROLLING; CRYSTAL MICROSTRUCTURE; GRAIN SIZE AND SHAPE; HOT ROLLING; MARTENSITE; MARTENSITIC TRANSFORMATIONS; SOLIDIFICATION; TEXTURES; VOLUME FRACTION;

TAYLOR MODEL;

STAINLESS STEEL;

EID: 0031101438     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-6454(96)00222-4     Document Type: Article

References (69)

1. K. Ohno, H. Tanaka, T. Sasaki, M. Dubke, H. J. Funk, K. H. Hanke, H. Pfeifer and R. Hentrich. Proc. Int. Conf. on New Smelting Reduction and Near Net Shape Casting Technologies for Steel, pp. 14-22. Pohang, South Korea.
2. R. Hentrich, M. Dubke, H. J. Funk, K. H. Hanke, J. Loh and S. Kuhlmann, Stahl u. Eisen 111, 51 (1991).
3. D. Raabe, M. Holscher, M. Dubke, H. Pfeifer, K. H. Hanke and K. Lucke, Steel Research 64, 359 (1993).
4. D. Raabe, M. Hölscher, M. Dubke and K. Lücke, Proc. Int. Conf. on Strip Casting. Hot and Cold Working of Stainless Steels, Quebec, Canada (edited by N. D. Ryan, A. J. Brown and H. J. McQueen), pp. 3-17. The Metallurgical Society of the Canadian Institute of Materials, Montreal, Canada (1993).
5. B. Q. Li, J. Mater. (JOM) 47, 13 (1995).
6. B. Q. Li, J. Mater. (JOM) 47, 29 (1995).
7. D. Raabe, M. Hölscher, F. Reher and K. Lücke, Scripta metall. 29, 113 (1993).
8. D. Raabe, M. Hölscher, M. Dubke, F. Reher and K. Lücke, Mater. Sci. Forum 157-162, 1039 (1994).
9. D. Raabe, Metall. Mater. Trans. A 26A, 991 (1995).
10. D. Raabe. Mater. Sci. Technol. 11, 461 (1995).
11. S. Thiem, W. Löser and M. Jurisch, Steel Research 64, 307 (1993).
12. W. Löser and D. M. Herlach, Metall. Mater. Trans. A 23A, 1585 (1992).
13. K. Shibuya and M. Ozawa, ISIJ International 31, 661 (1991).
14. S. Kiyake, H. Yamane, M. Yukumoto and M. Ozawa, ISIJ International 31, 689 (1991).
15. D. Raabe and K. Lücke, Mater. Sci. Technol. 9, 302 (1993).
16. D. Raabe and K. Lücke, Scripta metall. 26, 1221 (1992).
17. M. Hölscher, D. Raabe and K. Lücke, Steel Research 62, 567 (1991).
18. K. Bethke, M. Hölscher and K. Lücke, Mater. Sci. Forum 157-162, 1137 (1994).
19. D. Raabe. J. Mater. Sci. 30, 47 (1995).
20. T. J. Rickert, Mater. Sci. Forum 157-162, 2017 (1994).
21. S. R. Goodman and H. Hu, Trans. Metall. Soc. AIME 230, 1413 (1964).
22. C. D. Singh, V. Ramaswamy and C. Suryanarayana, Textures and Microstructures 13, 227 (1991).
23. T. G. Smith, Proc. 5th Int. Conf. on Textures of Materials (edited by G. Gottstein and K. Lücke). Vol. 2, p. 485. Springer Verlag, Aachen, Germany (1978).
24. C. Donadille, R. Valle, P. Dervin and R. Penelle, Acta metall. 37, 1547 (1989).
25. D. Raabe, in preparation.
26. K. Mäder and E. Hornbogen, Scripta metall. 8, 979 (1974).
27. O. Engler, J. Hirsch and K. Lücke, Z. Metallkunde 86, 465 (1995).
28. U. Schmitter, Diploma Thesis, RWTH Aachen, Institut für Metallkunde und Metallphysik, K. Lücke (1993).
29. D. Raabe, Acta metall. 43, 1023 (1995).
30. U. Schmitter and K. Lücke, in preparation.
31. H. Hu, R. S. Cline, S. R. Goodman, in Proc. ASM Seminar on Recrystallization, Grain Growth and Textures (edited by H. Margolin), p. 295. American Society of Metals, Metals Park, Ohio (1966).
32. U. F. Kocks and C. T. Necker, Proc. 15th RISØ Int. Symp. on Materials Science 'Numerical Prediction of Deformation Processes and the Behaviour of Real Materials' (edited by S. I. Andersen, J. B. Bilde-Sorensen, T. Lorentzen, O. B. Pedersen and N. J. Sorensen), pp. 45-57. RISØ National Lab., Roskilde, Denmark (1994).
33. L. G. Schulz, J. appl. Phys. 20, 1030 (1949).
34. H. J. Bunge and C. J. Esling, Physique-Lettr. 40, 627 (1979).
35. M. Dahms and H. J. Bunge, J. appl. Crystallogr. 22, 439 (1989).
36. M. Dahms, Textures and Microstructures 19, 169 (1992).
37. H. J. Bunge, Texture Analysis in Materials Science. Butterworths, London (1982).
38. D. Raabe, Textures and Microstructures 23, 115 (1995).
39. U. Siegel. H.-J. Spies and H.-J. Eckstein, Steel Research 57, 25 (1986).
40. J. Hirsch and K. Lücke, Acta metall. 36, 2863 (part I), 2883 (part II) (1988).
41. J. Hirsch and K. Lücke, Acta metall. 36, 2863 (part I), 2883 (part II) (1988).
42. R. E. Schramm and R. P. Reed, Metall. Trans. 6A, 1345 (1975).
43. J. Hirsch, Hot Deformation of Aluminium Alloys (edited by T. G. Langdon, M. D. Merchant, J. G. Morris and M. A. Zaidi), pp. 379-385. TMS Aachen, Germany (1991).
44. M. Hölscher, D. Raabe and K. Lücke, Acta metall. 42, 879 (1994).
45. W. Mao, Doctoral Thesis, RWTH Aachen, pp. III-11, 19 and p. III-28 (1988).
46. J. H. Beynon, P. R. Brown, S. I. Mizban, A. R. S. Ponter and C. M. Sellars, in Computational Techniques for the Prediction of Materials Processes and Defects (edited by M. Predeleanu), pp. 19-28. Elsevier, Amsterdam (1987).
47. A. J. McLaren and C. M. Sellars, Mater. Sci. Technol. 8, 1090 (1992).
48. J. Hirsch, E. Nes and K. Lücke, Acta metall. 35, 427 (1987).
49. G. Wassermann, Z. Metallkunde 54, 61 (1963).
50. P. van Houtte, Acta metall. 26, 591 (1978).
51. H. Mecking, Proc. 6th Int. Conf. on Textures of Materials (edited by S. Nagashima), p. 53. Iron and Steel Inst. of Japan, Tokyo (1981).
52. I. L. Dillamore and W. T. Roberts, Metall. Reviews 10, 271 (1965).
53. H. R. Wenk, H. J. Bunge, J. Kallend, K. Lücke, S. Matthies, J. Pospiech and P. van Houtte, Proc. 8th Int. Conf. on Textures of Materials (edited by J. Kallend and G. Gottstein), p. 17. The Metall. Soc. (1988).
54. D. Goodchild, W. T. Roberts and D. V. Wilson, Acta metall. 18, 1137 (1970).
55. G. E. G. Tucker, Acta metall. 12, 1093 (1964).
56. G. I. Taylor, J. Inst. Met. 62, 307 (1938).
57. H. Honneff and H. Mecking, Proc. 5th Int. Conf. on Textures of Materials (edited by G. Gottstein and K. Lücke), p. 265. Springer Verlag (1978), and Proc. 6th Int. Conf. on Textures of Materials (edited by S. Nagashima), p. 347. Iron and Steel Inst. of Japan, Tokyo (1981).
58. H. Honneff and H. Mecking, Proc. 5th Int. Conf. on Textures of Materials (edited by G. Gottstein and K. Lücke), p. 265. Springer Verlag (1978), and Proc. 6th Int. Conf. on Textures of Materials (edited by S. Nagashima), p. 347. Iron and Steel Inst. of Japan, Tokyo (1981).
59. U. F. Kocks and H. Chandra, Acta metall. 30, 695 (1982).
60. P. van Houtte, Proc. 6th Int. Conf. on Textures of Materials (edited by S. Nagashima), p. 428. Iron and Steel Inst. of Japan, Tokyo (1981).
61. D. Raabe, K. Lücke, Mater. Sci. Forum 157-162, 597 (1994).
62. F. Emren, U. von Schlippenbach and K. Lücke, Acta metall. 34, 2015 (1986).
63. D. Raabe, Mater. Sci. Engng A 197, L1-L3, 31 (1995).
64. D. Raabe, Mater. Sci. Technol. 11, 455 (1995).
65. Z. Nishiyama, Sci. Rep. Inst., Tohoku Univ. 23, 638 (1934/1935).
66. G. Wassermann, Archiv Eisenhüttenwesen 16, 647 (1933).
67. G. J. Davies, J. S. Kallend and P. P. Morris, Acta metall. 24, 159 (1976).
68. A. Jones and B. R. Walker, Metal Sci. 8, 394 (1974).
69. R. Ray and J. J. Jonas, Int. Mat. Rev. 35, 1 (1990).