Intragranular ferrite in inoculated low-carbon steels

Materials Forum

Volumn 23, Issue , 1999, Pages 77-104

  Barbaro, F J ^a   Krauklis, P ^b  

^a BHP BILLITON   (Australia)

^b UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

FERRITES; METALLOGRAPHIC MICROSTRUCTURE; NUCLEATION; PLATES (STRUCTURAL COMPONENTS); TOUGHNESS; WELDABILITY;

INOCULATED LOW-CARBON STEELS; INTRAGRANULAR FERRITES;

CARBON STEEL;

EID: 0033340960     PISSN: 08832900     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (117)

1. D.J. Abson and R.J. Pargetter, Int. Metals Rev. 31 (1986) 141-194
2. H.K.D.H. Bhadeshia, Bainite in Steels Inst. of Materials, London (1992) 245-282
3. J.W. Christian, Theory of Transformation in Metals and Alloys Pergamon, Oxford (1965) 405-432
4. Kenneth Easterling, Introduction to the Physical Metallurgy of Welding 2nd edition, Butterworth Heinemann, London (1992) 55-125, 126-190
5. R.A. Farrar and P.L. Harrison, J. Mater. Sci. 22 (1987) 3812-3820
6. Ø. Grong and D.K. Matlock, Int. Metals Rev. 31 (1986) 27-48
7. P.L. Harrison and R.A. Farrar, Int. Mater. Rev. 34 (1989) 35-51
8. R.W.K. Honeycombe and H.K.D.H. Bhadeshia, Steels: Microstructure and Properties 2nd edition, Edward Arnold, London (1995) 140-150, 280-318
9. D.A. Porter and K.E. Easterling, Phase Transformations in Metals 2nd edition, Chapman and Hall, London (1992) 192-197
10. M. Kolke, H. Homma, S. Matsuda, M. Imagumbai, M. Hirai and F. Yamaguchi, European Patent Application 85112244.0 Nippon Steel Corporation, Japan (1985)
11. D.J. Abson and R.J. Pargetter, Int. Metals Rev. 31 (1986) 141
12. Ø. Grong and D.K. Matlock, Int. Metals Rev. 31 (1986) 27
13. R.A. Farrar and P.L. Harrison, J. Mater. Sci. 22 (1987) 3812
14. H.K.D.H. Bhadeshia, Bainite in Steels Inst. of Materials, London (1992) 245
15. F.J. Barbaro, P. Krauklis and K.E. Easterling, Mater. Sci. Technol. 5 (1989) 1057
16. B.L. Bramfitt and J.G. Speer, Metall. Trans. 21A (1990) 817
17. H.K.D.H. Bhadeshia and J.W. Christian, Metall. Trans. 21A (1990) 767
18. J.R. Yang and H.K.D.H. Bhadeshia, Welding J. 69 (1990) 305-s
19. P.L. Harrison and R.A. Farrar, Int. Mater. Rev. 34 (1989) 35
20. J.R. Yang and H.K.D.H. Bhadeshia, J. Mater Sci. 26 (1991) 839
21. J.R. Yang, C.C. Yang and C.Y. Huang, J. Mater. Sci. Lett. 11 (1992) 1547
22. R.A. Ricks, G.S. Barritte and P.R. Howell, Solid/Solid Phase Transformations H.I. Aaronson and C.M. Wayman, eds., Metall. Soc. AIME, Pittsburg, PA, USA (1981) 463
23. R.A. Ricks, P.R. Howell and G.S. Barritte, J. Mater. Sci. 17 (1982) 732
24. R.W.K. Honeycombe and H.K.D.H. Bhadeshia, Steels: Microstructure and Properties 2nd edition, Edward Arnold, London (1995) 140
25. H.K.D.H. Bhadeshia, Steel Technol. Int. (1989) 289
26. D.V. Edmonds and R.C. Cochrane, Metall. Trans. 21A (1990) 1527
27. J.R. Yang, C.Y. Huang, C.F. Huang and J.N. Aoh, J. Mater. Sci. Lett. 12 (1993) 1290
28. T. Ochi, T. Takahashi and H. Takada, Iron and Steelmaker, (Feb. 1989) 21
29. F. Ishikawa, T. Takahashi and T. Ochi, Solid-Solid Phase Transformations, W.C. Johnson et al eds., TMS, Warrendale, PA, USA (1994) 171
30. F. Ishikawa, T. Takahashi and T. Ochi, Metall. Trans. 25A (1994) 929
31. I. Madariaga, J.L. Romero and I. Gutierrez, Metall. Mater. Trans. 29A (1998) 1003
32. J. Herbertson, Unpublished work. Thermec '97 (conf. keynote lect.) Thermomechanical Opportunities and Challenges, Wollongong, Australia, 7 July, 1997, Session 1B
33. M. Imagumbai, R. Chijiiwa, N. Aikawa, M. Nagumo, H. Homma, S. Matsuda and H. Mimura, HSLA Steels: Metallurgy and Applications ASM International, Materials Park, OH 44073-0002, USA (1986) 557
34. K. Nishioka and H. Tamehiro, Microalloying '88; Int. Symp. on Applications of HSLA Steel (proc. conf.) Chicago, Ill, USA, (Sept. 1988) 597
35. J.L. Lee, Acta Metall. Mater. 42 (1994) 3291
36. Y.T. Pan and J.L. Lee, Mater. and Design, 15 (1994) 331
37. T. Funakoshi, T. Tanaka, S. Ueda, M. Ishikawa, N. Koshizuka and K. Kobayashi, Trans ISIJ 17 (1977) 419
38. Y. Nakano, K. Amano, Y. Sannomiya, E. Kobayashi, T. Ogawa and H. Yajima, Kawasaki Tech. Report 17 Kawasaki Steel Corp., Japan (October 1987) 41
39. S. Deshimaru, I. Hirai, K. Amano, S. Ueda, T. Uemura and K. Tsubota, Kawasaki Tech. Report No. 17, Kawasaki Steel Corp., Japan (October 1987) 34
40. S. Watanabe, K. Arimochi, J. Furusawa, N. Komatsubara, H. Kuruyasu, N. Nakano and S. Suzuki, Trans. ISIJ 26 (1986) B-284
41. K. Ohnishi, S. Suzuki, A. Inami, R. Someya, S. Sugisawa and J. Furusawa, Microalloying 1988: Int. Symp. on Applications of HSLA Steel (proc. conf.) Chicago, Ill, USA, (Sept. 1988) 215
42. K. Itoh, S. Mimura, S. Matsuda, K. Yamamoto, Y. Kawashima, Y. Ohno and Y. Okamura, HSLA Steels: Metallurgy and Applications ASM, Metals Park, OH, USA (1986) 669
43. Y. Ohno, Y. Okamura, K. Uchino, K. Yamamoto, S. Matsuda, K. Ikeda and T. Satoh, Nippon Steel Tech. Report 36 Nippon Steel Corp., Japan (January 1988) 49
44. H. Homma, S. Ohkita, S. Matsuda and K. Yamamoto, Welding J. 66 (1987) 301-s
45. S. Ohkita, M. Wakabayashi, H. Homma, K. Yamamoto and S. Matsuda, Nippon Steel Tech. Report 37 Nippon Steel Corp., Japan (April 1988), 10
46. K. Yamamoto, S. Matsuda, T. Haze, R. Chijiiwa and H. Mimura, Residual and Unspecified Elements in Steel, A.S. Melilli and E.G. Nisbett, eds., ASTM STP 1042, ASTM, Philadelphia, PA, USA (1989) 266
47. R. Chijiiwa, H. Tamehiro, M. Hirai, H. Matsuda and H. Mimura, Offshore Mechanics and Artic Engineering OMAE (proc. conf.) Houston, TX, USA, (February, 1988) 165
48. I.S. Harneshaug, G. Valland, K. Gundersen and M. Roland, Offshore Mechanics and Artic Engineering (OMAE) (proc. conf.) Houston, TX, USA, (February, 1988) 181
49. H. Nakasugi, H. Tamehiro, K. Nishioka, Y. Ogata and Y. Kawada, Welding-90 A. Niku-Lari, ed., IITT International 40, Gournay-Sur-Marne, France (1990) 125
50. Y. Terada, R. Chijiiwa, H. Tamehiro, T. Kikuma and K. Funato, HSLA Steels: Processing, Properties and Applications, G. Tither and Z. Shouhua, eds., TMS, Warrendale, PA, USA (1992) 519
51. K. Yamamoto, T. Hasegawa and J. Takamura, Tetsu-To-Hagane 79 (1993) 41 (in Japanese)
52. F.J. Barbaro, Ph.D. thesis, The University of NSW, Sydney, Australia (1990)
53. F.J. Barbaro, P. Krauklis, J.G. Williams and K.E. Easterling, Materials United in the Service of Man (proc. conf.) Perth, Australia, August 1990, R.D. Davies and D.I. Hatcher, eds., Inst. of Metals and Mater. Australasia, Melbourne (1990) paper 5-1
54. F.J. Barbaro, Unpublished work, BHP Steel Technology Report PK/TIC/92/005 (1992)
55. M. Agceli, M.Sc. thesis, The University of NSW, Sydney, Australia (1994)
56. M. Agceli, F.J. Barbaro and P. Krauklis, Materials Research 96 II (proc. conf.) Brisbane, Australia, July 1996, D. St. John et al, eds., Inst. Metals and Mater. Australasia, Melbourne, (1996) 53
57. J.L. Lee and Y.T. Pan, Mater. Sci. Eng. A136 (1991) 109
58. J.L. Lee and Y.T. Pan, Metall. Trans. 22A (1991) 2818
59. Y.T. Pan and J.L. Lee, China Steel Tech. Report 5 China Steel Corporation, Taiwan (1991) 9
60. Y.T. Pan and J.L. Lee, Processing, Microstructure and Properties of Microalloyed and other Modern High-strength Low-alloy Steels A.J. DeArdo, ed., ISS/AIME, Warrendale, PA, USA (1992) 487
61. J.L. Lee and Y.T. Pan, Mater. Sci. Technol. 8 (1992) 236
62. J.L. Lee and Y.T. Pan, Low-carbon Steels for the 90's, R. Asfahani and G. Tither, eds., TMS, Warrendale, PA, USA (1993) 521
63. J.L. Lee and Y.T. Pan, Metall. Trans. 24A (1993) 1399
64. J.L. Lee and Y.T. Pan, ISIJ Int. 35 (1995) 1027
65. Y. Fukada and Y. Komizo, Trans. Japan Welding Soc. 23 (1992) 3
66. Y. Fukada and Y. Komizo, Welding Int. 7 (1993) 286
67. Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga and K. Okamoto, ISIJ Int. 34 (1994) 829
68. T. Kimura, A. Ohmori, T. Hayashi, F. Kawabata, and K. Amano, THERMEC '97: Thermomechanical Processing of Steels and Other Materials, eds. T. Chandra and T. Sakai, TMS, Warrendale, PA, USA (1997) 645
69. S. Ogibayashi, K. Yamaguchi, M. Hirai, H. Goto, H. Yamaguchi and K. Tanaka, 6th Int. Iron and Steel Congress, Nagoya, Japan, ISIJ, Japan (1990) 612
70. S. Ogibayashi, Nippon Steel Tech. Report 61 Nippon Steel Corporation, Japan (April 1994) 70
71. P.H.M. Hart, Microalloying '88; Int. Symp. on Applications of HSLA Steel (proc. conf.) Chicago, Ill, USA, (Sept. 1988) 163
72. D.J. Abson and R.E. Dolby, The Welding Inst. Res. Bull. (April 1980) 100
73. T. Araki (chief ed.), Atlas for Bainitic Microstructures 1 ISIJ, Japan (1992) 4
74. M.R. Meschian, Ph.D. thesis, The University of NSW, Sydney, Australia (1997)
75. M.R. Meschian, F.J. Barbaro and P. Krauklis, Materials Research 96 II (proc. conf.) Brisbane, Australia, July 1996, D. St. John et al, eds., Inst. Metals and Mater. Australasia, Melbourne, (1996) 49
76. A.A.B. Sugden and H.K.D.H. Bhadeshia, Metall. Trans. 20A (1989) 1811
77. G.N. Heintz and R. McPherson, Welding J. 65 (1986) 71-s
78. S. Ohkita, H. Homma, S. Tsushima and N. Mori, Australian Welding J. (spring 1984) 29
79. Y. Horii, S. Ohkita, M. Wakabayashi and M. Namura, Nippon Steel Tech. Report 37 Nippon Steel Corporation, Japan (April 1988) 1
80. D.W. Oh, D.L. Olson and R.H. Frost, Welding J. 69 (1990) 151-s
81. J.W. Christian, Theory of Transformation in Metals and Alloys Pergamon, Oxford (1965) 405
82. Kenneth Easterling, Introduction to the Physical Metallurgy of Welding 2nd edition, Butterworth Heinemann, London (1992) 112-118
83. D.A. Porter and K.E. Easterling, Phase Transformations in Metals 2nd edition, Chapman and Hall, London (1992) 192-197
84. H.I. Aaronson and C. Wells, Trans. AIME 206 (1956) 1216
85. G. Thewlis, Mater. Sci. Technol. 10 (1994) 110
86. S.J. Jones and H.K.D.H. Bhadeshia, Metall. and Mater. Trans. 28A (1997) 2005
87. S. St-Laurent and G. L'Esperance, Mater. Sci. Eng., A149 (1992) 203
88. S. Matsuda and N. Okumura, Trans. ISIJ 18 (1978) 198
89. T. Gladman, Proc. Roy. Soc. A 294 (1966) 298
90. J.M. Gregg and H.K.D.H. Bhadeshia, Acta Mater. 45 (1997) 739
91. G.C. Weatherly, Metal Sci. J. 2 (1968) 237
92. M. Strangwood and H.K.D.H. Bhadeshia, Phase Transformations '87, G.W. Lorimer, ed., Inst, of Metals, London, UK (1988) 466
93. J.M. Gregg, and H.K.D.H. Bhadeshia, Acta Metall. Mater. 42 (1994) 3321
94. S. Zhang, N. Hattori, M. Enomoto and T. Tarui, ISIJ Int. 36 (1996) 1301
95. B.L. Bramfitt, Metall. Trans. 1A (1970) 1987
96. T.H. North, H.B. Bell, A. Koukabi and I. Craig, Welding J. 58 (1979) 343-s
97. N. Mori, S. Homma, S. Okita, and M. Wakabayashi, IIW Doc. No. IX-1196-81 (1981)
98. M.E. Saggese, D.N. Hawkins and J.A. Whiteman, Effects of Residual, Impurity and Alloying Elements on Weldability and Weld Properties (proc. conf.) London, UK, November, 1983, The Welding Institute, Abington, Camb, UK (1983) paper 15
99. A.R. Mills, G. Thewlis and J.A. Whiteman, Mater. Sci. Technol. 3 (1987) 1051
100. A.O. Kluken, Ø. Grong and J. Hjelen, Metall. Trans. 22A (1991) 657
101. Ø. Grong, H.K. Kluken, H.K. Nylund, A.L. Dons and J. Hjelen, Metall. and Mater. Trans. 26A, (1995) 525
102. J.M. Dowling, J.M. Corbett and H.W. Kerr, Metall. Trans. 17A (1986) 1611
103. D.W. Oh, D.L. Olson and R.H. Frost, Trans. ASME 116 (1994) 26
104. F.J. Barbaro, R.H. Edwards and K.E. Easterling, 7th Nat. Conf. of the Australian X-Ray Analysis Assoc. AXAA-88 (proc. conf.) Perth, Australia, August 1988, The University of Western Australia, (1988) 1
105. R.C. Cochrane and B.R. Keville, Steels for Line Pipe and Pipeline Fittings Metals Society, London, UK (1981) 51
106. G.S. Barritte, R.A. Ricks and P.R. Howell, Quantitative Microanalysis with High Spatial Resolution (proc. conf.) Manchester, UK, 1981, The Metals Society, London, UK (1982) 112
107. S.A. Court and G. Pollard, Metallography 22, (1989) 219
108. P.H. Salmon Cox and J.A. Charles, J.I.S.I. 203 (1965) 493
109. E.T. Turkdogan and R.A. Grange, J.I.S.I. 208 (1970) 482
110. G.J.W. Kor and E.T. Turkdogan, Metall. Trans. 3A (1972) 1269
111. Y. Ueshima, H. Yuyama, S. Misoguchi and H. Kajioka, Tetsu-To-Hagane 75 (1989) 501 (in Japanese)
112. J.M. Gregg and H.K.D.H. Bhadeshia, Metall. Mater. Trans. 25A (1994) 1603
113. A.G. Fox and D.G. Brothers, Scripta Metall. Mater. 32 (1995) 1061
114. Y. Ito and M. Nakashini, The Sumitomo Search 15 Sumitomo Metal Industries, Japan (1976) 42
115. A.R. Bhatti, M.E. Saggese, D.N. Hawkins, J.A. Whiteman and M.S. Golding, Welding J. 63 (1984) 224-s
116. A.H. Koukaki, T.H. North and H.B. Bell, Metal Constr. 11 (1979) 639
117. Ø. Grong, T.A. Siewert and G.R. Edwards, Welding J. 65 (1986) 279-s