Optimal design and manufacture of biomedical foam pore structure for tissue engineering applications

Biomedical Foams for Tissue Engineering Applications

Volumn , Issue , 2014, Pages 71-100

  Salerno, A ^a   Nettis, P A ^b  

^a ISTITUTO ITALIANO DI TECNOLOGIA   (Italy)

^b UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

Biomimetic; Cell colonization; Pore structure; Scaffold; Vascularization

Indexed keywords

BIOMIMETICS; CELL ENGINEERING; MANUFACTURE; PORE STRUCTURE; SCAFFOLDS; SCAFFOLDS (BIOLOGY); TISSUE; TISSUE REGENERATION;

BIOLOGICAL TISSUES; CELL COLONIZATION; DESIGN AND MANUFACTURES; OPTIMAL DESIGN; PORE ARCHITECTURE; TISSUE ENGINEERING APPLICATIONS; TISSUE ENGINEERING SCAFFOLD; VASCULARIZATION;

TISSUE ENGINEERING;

EID: 84902565820     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9780857097033.1.71     Document Type: Chapter

References (74)

1. Akay G., Birch M.A., Bokhari M.A. Microcellular polyHIPE polymer supports osteoblast growth and bone formation in vitro. Biomaterials 2004, 25:3991-4000.
2. Bai F., Wang Z., Lu J., Liu J., Chen G., Lv R., Wang J., Lin K., Zhang J., Huang X. The correlation between the internal structure and vascularization of controllable porous bioceramic materials in vivo: a quantitative study. Tissue Engineering Part A 2010, 16:3791-3803.
3. Cao Y., Mitchell G., Messina A., Price L., Thompson E., Penington A., Morrison W., O'Connor A., Stevens G., Copper-White J. The influence of architecture on degradation and tissue ingrowth into three-dimensional poly(lactic-co-glycolic acid) scaffolds in vitro and in vivo. Biomaterials 2006, 27:2854-2864.
4. Capes J.S., Ando H.Y., Cameron M.E. Fabrication of polymeric scaffolds with a controlled distribution of pores. J Mater Sci Mater Med 2005, 16:1069-1075.
5. Cuddihy M.J., Kotov N.A. Poly(lactic-co-glycolic acid) bone scaffolds with inverted colloidal crystal geometry. Tissue Engineering Part A 2008, 14:1639-1649.
6. 2. PNAS 2006, 9:7426-7431.
7. Griffon D.J., Sedighi M.R., Schaeffer D.V., Eurell J.A., Johnson A.L. Chitosan scaffolds: Interconnective pore size and cartilage engineering. Acta Biomater 2006, 2:313-320.
8. Guarino V., Causa F., Salerno A., Ambrosio L., Netti P.A. Design and manufacture of microporous polymeric materials with hierarchal complex structure for biomedical application. Mater Sci Tech 2008, 24:1111-1117.
9. Guarino V., Urciuolo F., Alvarez-Perez M., Mele B., Netti P.A., Ambrosio L. Osteogenic differentiation and mineralization in fibre-reinforced tubular scaffolds: theoretical study and experimental evidences. J R Soc Interface 2012, 10.1098/rsif.2011.0913.
10. Harley B.A., Lynn A.K., Wissner-Gross Z., Bonfield W., Yannas I.V., Gibson L.J. Design of a multiphase osteochondral scaffold III: fabrication of layered scaffolds with continuous interfaces. J Biomed Mater Res 2010, 92A:1078-1093.
11. 2. J Control Release 2000, 66:177-185.
12. Hoffmann S., Hagenmuller H., Koch A.M., Vunjak-Novakovic G., Kaplan D.L., Merkle H.P., Muller R., Meinel L. Control of in vitro tissue-engineered bonelike structures using human mesenchymal stem cells and porous silk scaffolds. Biomaterials 2007, 28:1152-1162.
13. Hollister S.J. Porous scaffold design for tissue engineering. Nat Mater 2005, 4:518-524.
14. Hutmacher D.W. Scaffold design and fabrication technologies for engineering tissues-state of the art and future perspectives. J Biomat Sci Polym E 2001, 12:107-124.
15. Ishaug-Riley S.L., Crane-Kruger G.M., Yaszemski M.J., Mikos A.G. Three-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers. Biomaterials 1998, 19:1405-1412.
16. Jeong C.J., Hollister S.J. A comparison of the influence of material on in vitro cartilage tissue engineering with PCL, PGS, and POC 3D scaffold architecture seeded with Chondrocytes. Biomaterials 2010, 31:4304-4312.
17. Jeong C.J., Zhang H., Hollister S.J. Three-dimensional poly(1,8-octanediol- co-citrate) scaffold pore shape and permeability effects on sub-cutaneous in vivo chondrogenesis using primary chondrocytes. Acta Biomater 2011, 7:505-514.
18. Jiankang H., Dichen L., Yaxiong L., Bo Y., Hanxiang Z., Qin L., Bingheng L., Yi L. Preparation of chitosan-gelatin hybrid scaffolds with well-organized microstructures for hepatic tissue engineering. Acta Biomater 2009, 5:453-461.
19. Jones A.C., Arns C.H., Hutmacher D.W., Milthorpe B.K., Sheppard A.P., Knackstedt M.A. The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth. Biomaterials 2009, 30:1440-1451.
20. Karande T.S., Ong J.L., Agrawal C.M. Diffusion in musculoskeletal tissue engineering scaffolds: Design issues related to porosity, permeability, architecture, and nutrient mixing. Ann Biomed Eng 2004, 32:1728-1743.
21. Kim T.G., Chung H.J., Park T.G. Macroporous and nanofibrous hyaluronic acid/collagen hybrid scaffold fabricated by concurrent electrospinning and deposition/leaching of salt particles. Acta Biomater 2008, 4:1611-1619.
22. Kim K., Dean D., Wallace J., Breithaupt R., Mikos A.G., Fisher J.P. The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells. Biomaterials 2011, 32:3750-3763.
23. Koehne V., Heschel I., Scügner F., Lasrich D., Bartsch J.W., Jockusch H. Use of a novel collagen matrix with oriented pore structure for muscle cell differentiation in cell culture and in grafts. J Cell Mol Med 2008, 12:1640-1648.
24. Leong K.F., Chua C.K., Sudarmadji N., Yeong W.Y. Engineering functionally graded tissue engineering scaffolds. J Mech Behav Biomed 2008, 1:140-152.
25. Leong M.F., Rasheed M.Z., Lim T.C., Chian K.S. In vitro cell infiltration and in vivo cell infiltration and vascularization in a fibrous, highly porous poly(D,L-lactide) scaffold fabricated by cryogenic electrospinning technique. J Biomed Mater Res 2009, 91A:231-240.
26. Levy-Mishali M., Zoldan J., Levenberg S. Effect of scaffold stiffness on myoblast differentiation. Tissue Eng Pt A 2009, 15:935-944.
27. Lien S., Ko L., Huan T. Effect of pore size on ECM secretion and cell growth in gelatin scaffold for articular cartilage tissue engineering. Acta Biomater 2009, 5:670-679.
28. Lim J.Y., Donahue H.J. Cell sensing and response to micro- and nano-structured surfaces produced by chemical and topographic patterning. Tissue Eng 2007, 13:1879-1891.
29. Lu J., Flautre B., Anselme K., Hardouin P., Gallur M., Descamps M., Thierry B. Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo. J Mater Sci Mater M 1999, 10:111-120.
30. Lu H., Ko Y., Kawazoe N., Chen G. Cartilage tissue engineering using funnel-like collagen sponges prepared with embossing ice particulate templates. Biomaterials 2010, 31:5825-5835.
31. Lutolf M.P., Hubbell J.A. Synthetic biomaterials as instructive extracellular microenvironments for morphogenesis in tissue engineering. Nat Biotech 2005, 23:47-55.
32. Ma P.X. Biomimetic materials for tissue engineering. Adv Drug Deliver Rev 2008, 60:184-198.
33. Mastrogiacomo M., Scaglione S., Martinetti R., Dolcini L., Beltrame F., Cancedda R., Quarto R. Role of scaffold internal structure on in vivo bone formation in macroporous calcium phosphate bioceramics. Biomaterials 2006, 27:3230-3237.
34. McCoy R.J., Jungreuthmayer C., O'Brien F.J. Influence of flow rate and scaffold pore size on cell behavior during mechanical stimulation in a flow perfusion bioreactor. Biotech Bioeng 2012, 109:1583-1594.
35. Melchels F.P.W., Tonnarelli B., Olivares A.L., Martin I., Lacroix D., Feijen J., Wendt D.J., Grijpma D.W. The influence of the scaffold design on the distribution of adhering cells after perfusion cell seeding. Biomaterials 2011, 32:2878-2884.
36. Montjovent M., Mathieu L., Hinz B., Applegate L.L., Bouban P., Zambelli P., Månson J., Pioletti D.P. Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells. Tissue Eng 2005, 11:1640-1649.
37. Mygind T., Stiehler M., Baatrup A., Li H., Zou X., Flyvbjerg A., Kassem M., Bünger C. Mesenchymal stem cell ingrowth and differentiation on coralline hydroxyapatite scaffolds. Biomaterials 2007, 28:1036-1047.
38. Nam Y.S., Park T.G. Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation. J Biomed Mater Res 1999, 47:8-17.
39. O'Brien F.J., Harley B.A., Yannas I.V., Gibson L.J. The effect of pore size on cell adhesion in collagen-GAG scaffolds. Biomaterials 2005, 26:433-441.
40. Oh S.H., Kim T.H., Im G.I., Lee J.H. Investigation of pore size effect on chondrogenic differentiation of adipose stem cells using a pore size gradient scaffold. Biomacromolecules 2010, 11:1948-1955.
41. Pamula E., Bacakova L., Filova E., Buczynska J., Dobrzynski P., Noskova L., Grausov L. The influence of pore size on colonization of poly(L-lactide-glycolide) scaffolds with human osteoblast-like MG 63 cells in vitro. J Mater Sci Mater Med 2008, 19:425-435.
42. Park S.H., Kim T.G., Kim H.C., Yang D., Park T.G. Development of dual scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regeneration. Acta Biomater 2008, 4:1198-1207.
43. Park I.S., Kim S., Kim Y.H., Kim I.H., Kim S.H. A collagen/smooth muscle cell-incorporated elastic scaffold for tissue-engineered vascular grafts. J Biomater Sci, Polym E 2009, 20:1645-1660.
44. Ranucci C.S., Kumar A., Batra S.P., Moghe P.V. Control of hepatocyte function on collagen foams: sizing matrix pores toward selective induction of 2-D and 3-D cellular morphogenesis. Biomaterials 2000, 21:783-793.
45. Reverchon E., Cardea S., Rapuano C. A new supercritical fluid-based process to produce scaffolds for tissue replacement. J Supercrit Fluid 2008, 45:365-373.
46. Sachlos E., Czernuszka J.T. Making tissue engineering scaffolds work. Review on the application of solid free form fabrication technology to the production of tissue engineering scaffolds. Eur Cells Mater 2003, 5:29-40.
47. Salerno A., Iannace S., Netti P.A. Open-pore biodegradable foams prepared via gas foaming and microparticulate templating. Macromol Biosci 2008, 8:655-664.
48. Salerno A., Di Maio E., Iannace S., Netti P.A. Engineering of foamed structures for biomedical application. J Cell Plast 2009, 45:103-117.
49. Salerno A., Oliviero M., Di Maio E., Iannace S., Netti P.A. Design of porous polymeric scaffolds by gas foaming of heterogeneous blends. J Mat Sci Mater Med 2009, 20:2043-2051.
50. Salerno A., Guarnieri D., Iannone M., Zeppetelli S., Di Maio E., Iannace S., Netti P.A. Engineered μ-bimodal poly(e-caprolactone) porous scaffold for enhanced hMSC colonization and proliferation. Acta Biomater 2009, 5:1082-1093.
51. 2 foaming for bone regeneration. Compos Sci Technol 2010, 70:1838-1846.
52. Salerno A., Guarnieri D., Iannone M., Zeppetelli S., Netti P.A. Effect of micro- and macroporosity of bone tissue three-dimensional-poly(e-Caprolactone) scaffold on human mesenchymal stem cells invasion, proliferation, and differentiation in vitro. Tissue Eng Pt A 2010, 16:2661-2673.
53. 2 foaming. Macromol Rapid Comm 2011, 32:1150-1156.
54. 2 foaming of PCL and PCL-HA nano-composite: Effect of composition, thermal history and foaming process on foam pore structure. J Supercrit Fluid 2011, 58:158-167.
55. Salerno A., Zeppetelli S., Di Maio E., Iannace S., Netti P.A. Processing/structure/property relationship of multi-scaled PCL and PCL-HA composite scaffolds prepared via gas foaming and NaCl reverse templating. Biotech Bioeng 2011, 108:963-976.
56. Salerno A., Di Maio E., Iannace S., Netti P.A. Tailoring the pore structure of PCL scaffolds for tissue engineering prepared via gas foaming of multiphase blends. J Porous Mat 2012, 19:181-188.
57. 2 foaming and micronized NaCl leaching. Mater Lett 2012, 82:137-140.
58. Sapir Y., Kryukov O., Cohen S. Integration of multiple cell-matrix interactions into alginate scaffolds for promoting cardiac tissue regeneration. Biomaterials 2011, 32:1838-1847.
59. Seitz H., Rieder W., Irsen S., Leukers B., Tille C. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res B: Appl Biomater 2005, 74B:782-788.
60. Shor L., Güçeri S., Wen X., Gandhi M., Sun W. Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro. Biomaterials 2007, 28:5291-5297.
61. Silva M.M.C.G., Cyster L.A., Barry J.J.A., Yang X.B., Oreffo R.O.C., Grant D.M., Scotchford C.A., Howdle S.M., Shakesheff K.M., Rose F.R.A.J. The effect of anisotropic architecture on cell and tissue infiltration into tissue engineering scaffolds. Biomaterials 2006, 27:5909-5917.
62. Song Y., Wennink J.W.H., Kamphuis M.M.J., Vermes I., Poot A.A., Feijen J., Grijpma D.W. Effective seeding of smooth muscle cells into tubular poly(trimethylene carbonate) scaffolds for vascular tissue engineering. J Biomed Mater Res A 2010, 95A:440-446.
63. Stupp S.I. Biomaterials for regenerative medicine. MRS Bulletin 2005, 30:546-553.
64. Taboas J.M., Maddox R.D., Krebsbach P.H., Holliste S.J. Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. Biomaterials 2003, 24:181-194.
65. Thomson R.C., Yaszemski M.J., Powers J.M., Mikos A.G. Fabrication of biodegradable polymer scaffolds to engineer trabecular bone. J Biomat Sci Polym E 1996, 7:23-38.
66. Van Bael S., Chai Y.C., Truscello S., Moesen M., Kerckhofs G., Van Oosterwyck H., Kruth J.P., Schrooten J. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. Acta Biomater 2012, 8:2824-2834.
67. Virgilio N., Sarazin P., Favis B.D. Towards ultraporous poly(l-lactide) scaffolds from quaternary immiscible polymer blends. Biomaterials 2010, 31:5719-5728.
68. Wang J., Ma H., Jin X., Hu J., Liu X., Ni L., Ma P.X. The effect of scaffold architecture on odontogenic differentiation of human dental pulp stem cells. Biomaterials 2011, 32:7822-7830.
69. Washburn N.R., Simon C.G., Tona A., Elgendy H.M., Karim A., Amis E.J. Co-extrusion of biocompatible polymers for scaffolds with co-continuous morphology. J Biomed Mater Res 2002, 60:20-29.
70. Williams J.M., Adewunmi A., Scheck R.M., Flanagan C.L., Krebsbach P.H., Feinberg S.E., Hollister S.J., Das S. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 2005, 26:4817-4827.
71. Yamane S., Iwasaki N., Kasahara Y., Harada K., Majima T., Monde K., Nishimura S., Minami A. Effect of pore size on in vitro cartilage formation using chitosan-based hyaluronic acid hybrid polymer fibers. J Biomed Mater Res 2007, 81A:586-593.
72. Yang S., Leong K., Du Z., Chua C. The design of scaffolds for use in tissue engineering. Part I. traditional factors. Tissue Engineering 2001, 7:679-689.
73. Zein I., Hutmacher D.W., Tan K.C., Teoh S.H. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 2002, 23:1169-1185.
74. Zhang J., Wu L., Jing D., Ding J. A comparative study of porous scaffolds with cubic and spherical macropores. Polymer 2005, 46:4979-4985.