Variability in surface polarity of wood by means of AFM adhesion force mapping

Colloids and Surfaces A: Physicochemical and Engineering Aspects

Volumn 457, Issue 1, 2014, Pages 82-87

  Frybort, Stephan ^a   Obersriebnig, Michael ^b   Müller, Ulrich ^b   Gindl Altmutter, Wolfgang ^b   Konnerth, Johannes ^b  

^a KOMPETENZZENTRUM HOLZ GMBH   (Austria)

^b UNIVERSITY OF NATURAL RESOURCES AND LIFE SCIENCES   (Austria)

Author keywords

Adhesion force; AFM; Surface inactivation; Wood

Indexed keywords

ADHESION; CELL MEMBRANES; CYTOLOGY; HYDROPHILICITY; MAPPING; SURFACE CHEMISTRY;

ADHESION FORCES; AFM; CELL SURFACES; CELL WALL POLYMERS; INNER SURFACES; MICROSTRUCTURAL LEVELS; SURFACE INACTIVATION; SURFACE POLARITIES;

WOOD;

CARBOHYDRATE; POLYMER;

ADHESION; ADHESION FORCE MAPPING; AGING; ARTICLE; ATOMIC FORCE MICROSCOPY; CELL ADHESION; CELL SURFACE; CELL WALL; CONTROLLED STUDY; FAGUS SYLVATICA; FORCE; HYDROPHILICITY; MEASUREMENT; NONHUMAN; NORWAY SPRUCE; POLARIZATION; PRIORITY JOURNAL; SURFACE PROPERTY; THICKNESS; TOPOGRAPHY; WOOD;

ADHESION; CHEMISTRY; MAPPING; SURFACE PROPERTIES; WOOD;

EID: 84902288410     PISSN: 09277757     EISSN: 18734359     Source Type: Journal    
DOI: 10.1016/j.colsurfa.2014.05.055     Document Type: Article

References (34)

1. Dunky M., Niemz P. Holzwerkstoffe und Leime: Technologie und Einflussfaktoren 2002, Springer Verlag, Berlin, Heidelberg, New York.
2. Nussbaum R.M. Natural surface inactivation of Scots pine and Norway spruce evaluated by contact angle measurements. Holz Roh-Werkst. 1999, 57:419-424.
3. Piao C., Winandy J.E., Shupe T.F. From hydrophilicity to hydrophobicity: a critical review: Part I. Wettability and surface behavior. Wood Fiber Sci. 2010, 42:490-510.
4. Gindl M., Reiterer A., Sinn G., Stanzl-Tschegg S. Effects of surface ageing on wettability, surface chemistry, and adhesion of wood. Holz Roh Werkst. 2004, 62:273-280.
5. ÖNORM Brettschichtholz-Leistungsanforderungen und Mindestanforderungen an die Herstellung. ÖNORM EN 386 2002, ÖNORM.
6. Leite F.L., Herrmann P.S.P., Da Róz A.L., Ferreira F.C., Curvelo A.A.S., Mattoso L.H.C. Investigation of sisal fibers by atomic force microscopy: morphological and adhesive characteristics. J. Nanosci. Nanotechnol. 2006, 6:2354-2361.
7. Aydin I. Activation of wood surfaces for glue bonds by mechanical pre-treatment and its effects on some properties of veneer surfaces and plywood panels. Appl. Surf. Sci. 2004, 233:268-274.
8. Chow S.-Z. Infrared spectral characteristics and surface inactivation of wood at high temperatures. Wood Sci. Technol. 1971, 5:27-39.
9. Back E.L. Oxidative activation of wood surfaces for glue bonding. For. Prod. J. 1991, 41:30-36.
10. Liu P.F., Gardner D.J., Walcott M.P. A model for the description of polymer surface dynamic behaviour. Contact angle vs polymer surface properties. Langmuir 1995, 11:2674-2681.
11. Mantanis G.I., Young R.A. Wetting of wood. Wood Sci. Technol. 1997, 31:339-353.
12. Doshi D.A., Shah P.B., Singh S., Branson E.D., Malanoski A.P., Watkins E.B., Majewski J., van Swol F., Brinker C.J. Investigating the interface of superhydrophobic surfaces in contact with water. Langmuir 2005, 21:7805-7811.
13. Gunnels D.W., Gardner D.J., Wollcott M.P. Temperature dependence of wood surface free energy. Wood Fiber Sci. 1994, 26:445-447.
14. Marmur A. Equilibrium contact angles: theory and measurement. Colloids Surf., A: Physicochem. Eng. Aspects 1996, 116:55-61.
15. Scheikl M., Dunky M. Measurements of dynamic and static contact angles on wood for the determination of its surface tension and the penetration of liquids into the wood surface. Holzforschung 1998, 52:89-94.
16. DIN Klebstoffe-Benetzbarkeit-Bestimmung durch Messung des Kontaktwinkels und der freien Oberflächenenergie fester Oberflächen. DIN EN 828 2013, DIN.
17. Bastidas J.C., Venditti R., Pawlak J., Gilbert R., Zauscher S., Kadla J.F. Chemical force microscopy of cellulosic fibers. Carbohydr. Polym. 2005, 62:369-378.
18. Raj G., Balnois E., Baley C., Grohens Y. Adhesion force mapping of raw and treated flax fibres using AFM force-volume. J. Scanning Probe Microsc. 2009, 4:66-72.
19. Klash A., Ncube E., Meincken M. Localization and attempted quantification of various functional groups on pulpwood fibres. Appl. Surf. Sci. 2009, 255:6318-6324.
20. Meincken M., Evans P.D. Nanoscale characterisation of wood photodegradation using atomic force microscopy. Eur. J. Wood Wood Prod. 2009, 67:229-231.
21. Obersriebnig M., Konnerth J., Gindl-Altmutter W. Evaluating fundamental position-dependent differences in wood cell wall adhesion using nanoindentation. Int. J. Adhes. Adhes. 2013, 40:129-134.
22. Noy A., Vezenov D.V., Lieber C.M. Chemical force microscopy. Annu. Rev. Mater. Sci. 1997, 27:381-421.
23. Cappella B., Dietler G. Force-distance curves by atomic force microscopy. Surf. Sci. Rep. 1999, 34:1-104.
24. Pietak A., Korte S., Tan E., Downard A., Staiger M.P. Atomic force microscopy characterization of the surface wettability of natural fibres. Appl. Surf. Sci. 2007, 253:3627-3635.
25. Heinz W.F., A-Hassn E., Hoh J.H. Application of force volume imaging with atomic force microscopes. Veeco Application Note AN20, Rev. A1 2004, Veeco.
26. Leite F.L., Herrmann P.S.P. Application of atomic force spectroscopy (AFS) to studies of adhesion phenomena: a review. J. Adhes. Sci. Technol. 2005, 19:365-405.
27. 2 thin films obtained by radio frequency magnetron sputtering and plasma enhanced chemical vapor depositions. Langmuir 2001, 17:8199-8203.
28. Pakzad A., Simonsen J., Yassar R.S. Gradient of nanomechanical properties in the interphase of cellulose nanocrystal composites. Compos. Sci. Technol. 2012, 72:314-319.
29. Bair W.M. Development and Composition of the Warty Layer in Balsam Fir [Abies balsamea (L.) Mill.] 1974, Institute of Paper Chemistry, Lawrence University, Appleton, WI.
30. Liese W. Elektronenmikroskopie des Holzes 1970, Umschau Verlag, Frankfurt.
31. Notley S.M., Norgren M. Surface energy and wettability of spin-coated thin films of lignin isolated from wood. Langmuir 2010, 26:5484-5490.
32. Good R.J., van Oss C.J. The Modern Theory of Contact Angle and the Hydrogen Bond Components of Surface Energies 1993, Marcel Dekker Inc., New York, NY.
33. Chen L., Gu X., Fasolka M.J., Martin J.W., Nguyen T. Effects of humidity and sample surface free energy on AFM probe-sample interactions and lateral force microscopy image contrast. Langmuir 2009, 25:3494-3503.
34. Gindl M. Effects of Surface Free Energy on the Coating Properties of Wood 2002, Institut für Holzforschung, Universität für Bodenkultur, Vienna.