Preparation, characterization and performance of ZnCl2 incorporated polysulfone (PSF)/polyethylene glycol (PEG) blend low pressure nanofiltration membranes

Desalination

Volumn 347, Issue , 2014, Pages 52-65

  Panda, Swapna Rekha ^a   De, Sirshendu ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Low pressure; Nanofiltration; Polyethylene glycol; Polysulfone; Zinc chloride

Indexed keywords

AZO DYES; CHLORINE COMPOUNDS; DYES; MOLECULAR WEIGHT; NANOFILTRATION; NANOFILTRATION MEMBRANES; ORGANIC SOLVENTS; POLYSULFONES; SALTS; ZINC CHLORIDE;

CRYSTAL VIOLET; LOW PRESSURES; MOLECULAR WEIGHT CUTOFF; NF MEMBRANES; PERMEATE FLUX; SIMULTANEOUS USE; SIZE EXCLUSION; TRANSMEMBRANE PRESSURES;

POLYETHYLENE GLYCOLS;

CHLORIDE; FILTRATION; LOW PRESSURE; MEMBRANE; SOLVENT; ZINC;

EID: 84902147464     PISSN: 00119164     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.desal.2014.05.030     Document Type: Article

References (64)

1. Vatanpour V., Madaeni S.S., Moradian R., Zinadini S., Astinchap B. Fabrication and characterization of novel antifouling nanofiltration membrane prepared from oxidized multiwalled carbon nanotube/polyethersulfone nanocomposite. J. Membr. Sci. 2011, 375:284-294.
2. Brink L.E.S., Elbers S.J.G., Robbertsen T., Both P. The anti-fouling action of polymers preadsorbed on ultrafiltration and microfiltration membranes. J. Membr. Sci. 1993, 76:281-291.
3. Su Y., Cheng W., Li C., Jiang Z. Preparation of antifouling ultrafiltration membranes with poly(ethylene glycol)-graft-polyacrylonitrile copolymers. J. Membr. Sci. 2009, 329:246-252.
4. Ulbricht M., Richau K., Kamusewitz H. Chemically and morphologically defined ultrafiltration membrane surfaces prepared by heterogeneous photo-initiated graft polymerization. Colloids Surf. A Physicochem. Eng. Asp. 1998, 138:353-366.
5. Tran T.D., Mori S., Suzuki M. Plasma modification of polyacrylonitrile ultrafiltration membrane. Thin Solid Films 2007, 515(9):4148-4152.
6. Kim J.H., Lee K.H. Effect of PEG additive on membrane formation by phase inversion. J. Membr. Sci. 1998, 138:153-163.
7. Panda S.R., De S. Role of polyethylene glycol with different solvents for tailor-made polysulfone membranes. J. Polym. Res. 2013, 20:179-195.
8. Liub Y., Koopsa G.H., Strathmanna H. Characterization of morphology controlled polyethersulfone hollow fiber membranes by the addition of polyethylene glycol to the solution and bore liquid solution. J. Membr. Sci. 2003, 223:187-199.
9. Matsuyama H., Maki T., Teramoto M., Kobayashi K. Effect of PVP additive on porous polysulfone membrane formation by immersion precipitation method. Sep. Sci. Technol. 2003, 38(14):3449-3458.
10. Marchese J., Ponce M., Ochoa N.A., Pradanos P., Palacio L., Hernandez A. Fouling behaviour of polyethersulfone UF membranes made with different PVP. J. Membr. Sci. 2003, 211:1-11.
11. Han M.J., Nam S.T. Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane. J. Membr. Sci. 2002, 202:55-61.
12. Chaturvedi B.K., Ghosh A.K., Ramachandhran V., Trivedi M.K., Hanra M.S., Misra B.M. Preparation, characterization and performance of polyethersulfone ultrafiltration membranes. Desalination 2001, 133:31-40.
13. Barth C., Gonclalves M.C., Pires A.T.N., Roeder J., Wolf B.A. Asymmetric PSF and PES membranes: effects of thermodynamic conditions during formation on their performance. J. Membr. Sci. 2000, 169:287-299.
14. Swinyard T.B., Barrie A.J. Phase separation in nonsolvent/DMF/PES and nonsolvent/DMF/PSF systems. Br. Polym. J. 1988, 20:317-321.
15. Han M.J., Bhattacharyya D. Morphology and transport study of phase inversion polysulfone memrbanes. Chem. Eng. Commun. 1994, 128:197-209.
16. Kim I.C., Lee K.H. Effect of poly(ethylene glycol) 200 on the formation of a polyetherimide asymmetric membrane and its performance in aqueous solvent mixture permeation. J. Membr. Sci. 2004, 230:183-188.
17. Hagmeyer G., Gimbel R. Modelling the rejection of nanofiltration membranes using zeta potential measurements. Sep. Purif. Technol. 1999, 15:19-30.
18. Xu Y., Lebrun R.E. Comparison of nanofiltration properties of two membranes using electrolyte and non-electrolyte solutes. Desalination 1999, 122:95-106.
19. Yaroschuck A., Staude E. Charged membranes for low pressure reverse osmosis properties and applications. Desalination 1992, 86:115-134.
20. Garba Y., Taha S., Gondrexon N., Dorange G. Ion transport modelling through nanofiltration membranes. J. Membr. Sci. 1999, 160:187-200.
21. Peeters J.M.M., Mulder M.H.V., Strathmann H. Streaming potential measurements as a characterization method for nanofiltration membranes. Colloids Surf. A 1999, 150:247-259.
22. Padaki M., Isloor A.M., Belavadi G., Prabhu K.N. Preparation, characterization and performance study of poly(isobutylene-alt-maleic anhydride) [PIAM] and polysulfone [PSf] composite membranes before and after alkali treatment. Ind. Eng. Chem. Res. 2011, 50:6528-6534.
23. Ganesh B.M., Isloor A.M., Padaki M. Preparation and characterization of polysulfone and modified poly isobutylene-alt-maleic anhydride blend NF membrane. Desalination 2012, 287:103-108.
24. Padaki M., Isloor A.M., Ismail A.F., Abdullah M.S. Synthesis, characterization and desalination study of novel PSAB and mPSAB blend membranes with polysulfone. Desalination 2012, 295:35-42.
25. Padaki M., Isloor A.M., Kumar R., Ismail A.F., Matsuura T. Synthesis, characterization and desalination study of composite NF membranes of novel poly[(4aminophenyl)sulfonylbutanediamide (PASB) and methyalated poly[(4-aminophenyl)sulfonyl]butanediamide (mPASB) with polysulfone. J. Membr. Sci. 2013, 428:489-497.
26. Zhong P.S., Widjojo N., Chung T.S., Weber M., Maletzko C. Positively charged nanofiltration (NF) membranes via UV grafting on sulfonated polyphenylenesulfone (sPPSU) for effective removal of textile dyes from wastewater. J. Membr. Sci. 2012, 417:52-60.
27. Tweddle T.A., Kutowy O., Thayer W.L., Sourirajan S. Polysulfone ultrafiltration membranes. Ind. Eng. Chem. Prod. Res. Dev. 1983, 22:320.
28. 2 on formation of asymmetric PEI membranes by phase inversion process. J. Ind. Eng. Chem. 2000, 6(2):93-99.
29. 2 on the formation of polysulfone membrane. J. Membr. Sci. 1996, 119:59-64.
30. Ba C., Ba C. Design of advanced reverse osmosis and nanofiltration membranes for water purification. Materials Science and Engineering 2010, University of Illinois, Urbana-Champaign.
31. Bottino A., Capannelli G., Munari S., Turturro A. High performance ultrafiltration membranes cast from LiCl-solutiond solutions. Desalination 1988, 68:167-177.
32. Yuliwati E., Ismail A.F. Effect of additives concentration on the surface properties and performance of PVDF ultrafiltration membranes for refinery produced wastewater treatment. Desalination 2011, 273:226-234.
33. Fontananova E., Jansen J.C., Cristiano A., Curcio E., Drioli E. Effect of additives in the casting solution on the formation of PVDF membranes. Desalination 2006, 192:190-197.
34. Idris A., Ahmed I., Misran M. Novel high performance hollow fiber ultra filtration membranes spun from LiBr solutiond solutions. Desalination 2009, 249:541-548.
35. Ahmed I., Idris A., Pa N.F.C. Novel method of synthesizing poly(ether sulfone) membranes containing two solvents and a lithium chloride additive and their performance. J. Appl. Polym. Sci. 2010, 115:1428-1437.
36. 4) as an additive in the casting solution. Desalination 2010, 258:79-86.
37. C.D. Vecitis, J.C. Mierzwa, US Patent number WO 2013/142141 A1.
38. Singh S., Khulbe K.C., Matsuura T., Ramamurthy P. Membrane characterization by solute transport and atomic force microscopy. J. Membr. Sci. 1998, 142:111.
39. Sarkar B., De S., DasGupta S. Pulsed electric field enhanced ultrafiltration of synthetic and fruit juice. Sep. Purif. Technol. 2008, 63:582-591.
40. Chhaya S., Mondal G.C., Majumdar S.De Clarifications of stevia extract using cross flow ultrafiltration and concentration by nanofiltration. Sep. Purif. Technol. 2012, 89:125-134.
41. Idris A., Yet L.K. The effect of different molecular weight PEG additives on cellulose acetate asymmetric dialysis membrane performance. J. Membr. Sci. 2006, 280:920-927.
42. Wang Z.G., Xu Z.K., Wan L.S. Modulation the morphologies and performance of polyacrylonitrile-based asymmetric membranes containing reactive groups: effect of non-solvents in the dope solution. J. Membr. Sci. 2006, 278:447-456.
43. Chen J., Li J., Zhan X., Han X., Chen C. Effect of PEG additives on properties and morphologies of polyetherimide membranes prepared by phase inversion. Front. Chem. Eng. Chin. 2010, 4(3):300-306.
44. Choi J.H., Jegal J., Kim W.N. Fabrication and characterization of multi-walled carbon nanotubes/polymer blend membranes. J. Membr. Sci. 2006, 284:406-415.
45. Panda S.R., De S. Effects of polymer molecular weight, concentration, and role of polyethylene glycol as additive on polyacrylonitrile homopolymer membranes. Polym. Eng. Sci. 2013, 10.1002/pen.23792.
46. Ahmed I., Idris A., Yusof Noordin M., Rajput R. High performance ultrafiltration membranes prepared by the application of modified microwave irradiation technique. Ind. Eng. Chem. Res. 2011, 50:2272-2283.
47. Phadke M.A., Musale D.A., Kulkarni S.S., Karode S.K. Poly(acrylonitrile) ultrafiltration membranes. I. Polymer-salt-solvent interactions. J. Polym. Sci. B Polym. Phys. 2005, 43:2061-2073.
48. Kesting R.E. Synthetic Polymeric Membranes 1985, John Wiley & Sons, New York.
49. Kesting R.E. Phase inversion membranes. ACS Symposium Series 269 1985, 9131-9164. American Chemical Society, Washington, DC.
50. Bottino A., Capanelli G., Munari S., Turturro A. High performance ultrafiltration membranes cast from LiCl solution solutions. Desalination 1988, 68:167-177.
51. Ahmed I., Idris A., Pa N.F.C. Novel method of synthesizing polyethersulfone membrane containing two solvents and lithium chloride additive and its performance. J. Appl. Polym. Sci. 2010, 115:1428-1437.
52. Idris A., Ahmed I. Viscosity behavior of microwave-heated and conventionally heated poly(ether sulfone)/dimethylformamide/lithium bromide polymer solutions. J. Appl. Polym. Sci. 2008, 108:302-307.
53. Huang R.Y.M., Pheng X. Studies on solvent evaporation and polymer precipitation pertinent to the formation of asymmetric polyetherimide membranes. J. Appl. Polym. Sci. 1995, 57:613.
54. Song Y.Q., Sheng J.S., Wei M., Yuan X.B. Surface modification of polysulfone membranes by low-temperature plasma-graft poly(ethylene glycol) onto polysulfone membranes. J. Appl. Polym. Sci. 2000, 78:979-985.
55. Luo J., Wan Y. Effects of pH and salt on nanofiltration-a critical review. J. Membr. Sci. 2013, 438:18-28.
56. Katarzyna M.N. Synthesis and properties of polysulfone membranes. Desalination 1989, 71:83.
57. Purkait M.K., DasGupta S., De S. Performance of TX-100 and TX-114 for the separation of chrysoidine dye using cloud point extraction. J. Hazard. Mater. 2006, B137:827-835.
58. Sabnis R.W. Handbook of Acid Base Indicators 2008, CRC press, Taylor and Francis.
59. Rahimpour A., Rajaeian B., Hosienzadeh A., Madaeni S.S., Ghoreishi F. Treatment of oily wastewater produced by washing of gasoline reserving tanks using self-made and commercial nanofiltration membranes. Desalination 2011, 265:190-198.
60. Nystrom M., Kaipia L., Luque S. Fouling and retention of nanofiltration membranes. J. Membr. Sci. 1995, 98:249-262.
61. Manttari M., Pihlajamaki A., Nystrom M. Effect of pH on hydrophilicity and charge and their effect on the filtration efficiency of NF membranes at different pH. J. Membr. Sci. 2006, 280:311-320.
62. Padaki M., Isloor A.M., Fernandes J., Prabhu K.N. New polypropylene supported chitosan NF-membrane for desalination application. Desalination 2011, 280:419-423.
63. Shenvi S.S., Rashid S.A., Ismail A.F., Kassim M.A., Isloor A.M. Preparation and characterization of poly(1,4-phenylene ether ether sulfone) PPEES/chitosan composite nanofiltration membrane. Desalination 2011, 315:135-141.
64. Ganesh B.M., Isloor A.M., Ismail A.F. Enhanced hydrophilicity and salt rejection study of graphene oxide-polysulfone mixed matrix membrane. Desalination 2013, 313:199-207.