Fabrication of polyethersulfone (PES) membranes with nano-porous surface using potassium perchlorate (KClO4) as an additive in the casting solution

Desalination

Volumn 258, Issue 1-3, 2010, Pages 79-86

  Rahimpour, Ahmad ^a   Madaeni, Sayed Siavash ^b   Mansourpanah, Yaghoub ^c  

^a BABOL NOSHIRVANI UNIVERSITY OF TECHNOLOGY   (Iran)

^b RAZI UNIVERSITY   (Iran)

^c LORESTAN UNIVERSITY   (Iran)

Author keywords

Immersion precipitation; Membrane preparation; Milk filtration; Nano porous surface; Polyethersulfone; Potassium perchlorate (KClO4)

Indexed keywords

IMMERSION PRECIPITATION; MEMBRANE PREPARATION; MILK FILTRATION; NANO-POROUS SURFACES; POLYETHERSULFONES; POTASSIUM PERCHLORATE;

ANGLE MEASUREMENT; CAPILLARY FLOW; COAGULATION; CONTACT ANGLE; MEMBRANES; PERMEATION; POROUS MATERIALS; POTASSIUM; SURFACE STRUCTURE; WATER FILTRATION;

MICROFILTRATION;

COAGULATION; FILTRATION; MEMBRANE; PERCHLORATE; PRECIPITATION (CHEMISTRY); SCANNING ELECTRON MICROSCOPY;

EID: 77953622512     PISSN: 00119164     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.desal.2010.03.042     Document Type: Article

References (31)

1. Li Norman N., Fane Anthony G., Winston Ho W.S., Matsuura T. Advanced membrane technologies and applications 2008, John Wiley Publication, New Jersey.
2. Ismail A.F., Hassan A.R. Effect of additive contents on the performances and structural properties of asymmetric polyethersulfone (PES) nanofiltration membranes. Sep. Purif. Technol. 2007, 55:98-109.
3. Rahimpour A., Madaeni S.S., Shockravi A., Ghorbani S. Preparation and characterization of hydrophile nano-porous polyethersulfone membranes using synthesized poly(sulfoxide-amide) as additive in the casting solution. J. Membr. Sci. 2009, 334:64-73.
4. Chakrabarty B., Ghoshal A.K., Purkait M.K. Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive. J. Membr. Sci. 2008, 315:36-47.
5. Alsari A.M., Khulbe K.C., Matsuura T. The effect of sodium dodecyl sulfate solutions as gelation media on the formation of PES membranes. J. Membr. Sci. 2001, 188:279.
6. Barth C., Goncalves M.C., Pires A.T.N., Roeder J., Wolf B.A. Asymmetric polysulfone and polyethersulfone membranes: effects of thermodynamic conditions during formation on their performance. J. Membr. Sci. 2000, 169:287.
7. Weatherley L.R. Engineering processes for Bio-separation 1994, Butter worth-Heinemann, Northern Ireland.
8. Arthanareeswaran G., Sriyamuna Devi T.K., Raajenthiren M. Effect of silica particles on cellulose acetate blend ultrafiltration membranes: Part I. Sep. Purif. Technol. 2008, 64:38.
9. Kraus M.A., Nemas M., Frommer M.A. The effect of lowmolecular weight additives on the properties of aromatic polyamide membranes. J. Appl. Polym. Sci. 1979, 23:445.
10. Tsai H.A., Li L.D., Lee K.R., Wang Y.C., Li C.L., Huang J., Lai J.Y. Effect of surfactant addition on the morphology and pervaporation performance of asymmetric polysulfone membranes. J. Membr. Sci. 2000, 176:97-103.
11. Qin J.-J., Wong F.-S., Li Y., Liu Y.-T. A high flux ultrafiltration membrane spun from PSU/PVP (K90)/DMF/1, 2-propanediol. J. Membr. Sci. 2003, 211:139.
12. Wang Y.Q., Su Y.L., Ma X.L., Sun Q., Jiang Z.Y. Pluronic polymers and polyethersulfone blend membranes with improved fouling-resistant ability and ultrafiltration performance. J. Membr. Sci. 2006, 283:440.
13. Deniz S. Effect of nonsolvent type on the surface morphology and preparation of microporous membranes from blends of poly(phenylene oxide) and poly(p-phenylene oxide-sulfone) or polysulfone. Desalination 2006, 200:52.
14. Marchese J., Ponce M., Ochoa N.A., Prádanos P., Palacio L., Hernández A. Fouling behaviour of polyethersulfone UF membranes made with different PVP. J. Membr. Sci. 2003, 211:1.
15. Laninovic V. Relationship between type of nonsolvent additive and properties of polyethersulfone membranes. Desalination 2005, 186:39.
16. Baker R.W. Membrane Technology and Applications 2004, John Wiley Publication, New York.
17. Mulder M. Basic Principles of Membrane Technology 1996, Kluwer Academic Publishers, London.
18. Liu Y., Koops G.H., Strathmann H. Characterization of morphology controlled polyethersulfone hollow fiber membranes by the addition of polyethylene glycol to the dope and bore liquid solution. J. Membr. Sci. 2003, 223:187.
19. 2 nanoparticles with UV irradiation for modification of polyethersulfone ultrafiltration membranes. J. Membr. Sci. 2008, 311:158.
20. Chaturvedi B.K., Ghosh A.K., Ramachandran V., Trivedi M.K., Hanar M.S., Misra B.M. Preparation, characterization and performance of polyethersulfone ultrafiltration membranes. Desalination 2001, 133:31.
21. Boom R.M., Wienk I.M., Van Den Boomgard T., Smolders C.A. Microstructure in phase inversion membranes. Part II. The role of a polymeric additive. J. Membr. Sci. 1992, 73:277.
22. Yeo H.T., Lee S.T., Han M.J. Role of polymer additive in casting solution in preparation of phase inversion polysulfone membrane. J. Chem. Eng. Jpn. 2000, 33:180.
23. Jung B., Yoon J.K., Kim B., Rhee H.W. Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes. J. Membr. Sci. 2004, 243:45.
24. Ping H.T., Hua D.S., Ying Z.L. The study of mechanism of organic additives action in the PS membranes casting solution. Desalination 1991, 83:343.
25. Rahimpour A., Madaeni S.S., Mehdipour-Ataei S. Synthesis of a novel poly(amide-imide) (PAI) and preparation and characterization of PAI blended polyethersulfone (PES) membranes. J. Membr. Sci. 2008, 311:349.
26. Rahimpour A., Madaeni S.S. Polyethersulfone (PES)/cellulose acetate phthalate (CAP) blend ultrafiltration membranes: preparation, morphology, performance and antifouling properties. J. Membr. Sci. 2007, 305:299.
27. Bradford M.M. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal. Biochem. 1976, 72:248.
28. Kim J.H., Kim C.K. Ultrafiltration membranes prepared from blends of polyethersulfone and poly(1-vinylpyrrolidone-co-styrene) copolymers. J. Membr. Sci. 2005, 262:60.
29. Singh S., Khulbe K.C., Matsuura T., Ramamurthy P. Membrane characterization by solute transport and atomic force microscopy. J. Membr. Sci. 1998, 142:111.
30. Khayet M., Matsuura T. determination of surface and bulk pore sizes of flat sheet and hollow fiber membranes by atomic force microscopy, gas permeation and solute transport method. Desalination 2003, 158:57.
31. Richard Bowen W., Doneva Teodora A. Atomic force microscopy characterization of ultrafiltration membranes: correspondence between surface pore dimensions and molecular weight cut-off. Surf. Interface Anal. 2000, 29:544.