Modulation the morphologies and performance of polyacrylonitrile-based asymmetric membranes containing reactive groups: Effect of non-solvents in the dope solution

Journal of Membrane Science

Volumn 278, Issue 1-2, 2006, Pages 447-456

  Wang, Zhen Gang ^a   Xu, Zhi Kang ^a   Wan, Ling Shu ^a  

^a ZHEJIANG UNIVERSITY   (China)

Author keywords

Gelation; Macrovoid; Morphology; Non solvent; Poly(acrylonitrile co acrylic acid); Ultrafiltration membrane

Indexed keywords

GELATION; MECHANICAL PERMEABILITY; MORPHOLOGY; POLYACRYLONITRILES; SOLVENTS; SURFACE PROPERTIES; SURFACE TREATMENT; ULTRAFILTRATION;

MACROVOID; NON-SOLVENTS; POLY(ACRYLONITRILE-CO-ACRYLIC ACID); ULTRAFILTRATION MEMBRANES;

POLYMERIC MEMBRANES;

ACRYLIC ACID DERIVATIVE; BOVINE SERUM ALBUMIN; MACROGOL 200; MACROGOL 400; POLY(ACRYLONITRILE CO ACRYLIC ACID); POLYACRYLONITRILE; UNCLASSIFIED DRUG; WATER;

GELATION; MECHANICAL PERMEABILITY; MORPHOLOGY; POLYACRYLONITRILES; POLYMERIC MEMBRANES; SOLVENTS; SURFACE PROPERTIES; SURFACE TREATMENT; ULTRAFILTRATION;

ARTICLE; CHEMICAL REACTION; GELATION; MORPHOLOGY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; ULTRAFILTRATION;

EID: 33646801199     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2005.11.031     Document Type: Article

References (43)

1. Frommer M.A., and Messalem R.M. Mechanism of membrane formation. VI. Convective flows and large void formation during membrane precipitation. Ind. Eng. Chem. Prod. Res. Develop. 12 (1973) 328
2. Herbig S.H., Carinal J.R., Korsmeyer R.W., and Smith K.L. Asymmetric membrane tablet coating for osmotic drug delivery. J. Control. Release 35 (1995) 127
3. Wang D.-M., Lin F.-C., Chen L.-Y., and Lai J.-Y. Application of TPX membrane to transdermal delivery of nitroglycerin. J. Control. Release 50 (1998) 187
4. Smolders C.A., Reuvers A.J., Boom R.M., and Wienk I.M. Microstructures in phase-inversion membranes. Part 1. Formation of macrovoids. J. Membr. Sci. 73 (1992) 259
5. Zeman L., and Fraser T. Formation of air-cast cellulose acetate membrane. Part I. Study of macrovoid formation. J. Membr. Sci. 84 (1993) 93
6. Strathmann H., Kock K., and Amar P. The formation mechanism asymmetric membranes. Desalination 16 (1975) 179
7. Matz R. The structure of cellulose acetate membrane. I. The development of porous structure in anisotropic membranes. Desalination 10 (1972) 1
8. Mckelvey S.A., and Koros W.J. Phase separation, vitrification, and the manifestation of macrovoids in polymeric asymmetric membranes. J. Membr. Sci. 112 (1996) 29
9. Kharea V.P., Greenberg A.R., Zartman J., Krantz W.B., and Todd P. Macrovoid growth during polymer membrane casting. Desalination 145 (2002) 17
10. Termonia Y. Fundamentals of polymer coagulation. J. Polym. Sci.: Polym. Phys. Ed. 33 (1995) 279
11. Lee H.J., Won J., Lee H., and Kang Y.S. Solution properties of poly(amic acid)-NMP containing LiCl and their effects on membrane morphologies. J. Membr. Sci. 196 (2002) 267
12. Nie F.-Q., Xu Z.-K., Wan L.-S., Ye P., and Wu J. Acrylonitrile-based copolymers containing reactive groups: synthesis and preparation of ultrafiltration membranes. J. Membr. Sci. 230 (2004) 1
13. Han M.J., and Nam S.T. Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase-inversion membrane. J. Membr. Sci. 202 (2002) 55
14. Kang J.S., and Lee Y.M. Effects of molecular weight of polyvinylpyrrolidone on precipitation kinetics during the formation of asymmetric polyacrylonitrile membrane. J. Appl. Polym. Sci. 85 (2002) 57
15. Xu J., and Xu Z.-L. Poly(vinyl chloride) (PVC) hollow fiber ultrafiltration membranes prepared from PVC/additives/solvent. J. Membr. Sci. 208 (2002) 203
16. Yoo S.H., Kim J.H., Jho J.Y., Won J., and Kang Y.S. Influence of the addition of PVP on the morphology of asymmetric polyimide phase-inversion membranes: effect of PVP molecular weight. J. Membr. Sci. 236 (2004) 203
17. Kim I.C., and Lee K.H. Effect of poly(ethylene glycol) 200 on the formation of a polyetherimide asymmetric membrane and its performance in aqueous solvent mixture permeation. J. Membr. Sci. 230 (2004) 183
18. Domszy R.C., Alamo R., Edwards C.O., and Mandelkern L. Thermoreversible gelation and crystallization of homopolymers and copolymers. Macromolecules 19 (1986) 310
19. Li S.-G., van den Boomgaard Th., Smolders C.A., and Strathmann H. Physical gelation of amorphous polymers in a mixture of solvent and non-solvent. Macromolecules 29 (1996) 2053
20. Lin K.-Y., Wang D.-M., and Lai J.-Y. Non-solvent-induced gelation and its effect on membrane morphology. Macromolecules 35 (2002) 6697
21. Kang J.S., Won J., Park H.C., Kim U.Y., Kang Y.S., and Lee Y.M. Morphology control of asymmetric membranes by UV irradiation on polyimide dope solution. J. Membr. Sci. 169 (2000) 229
22. Lin F.-C., Wang D.-M., Lai C.-L., and Lai J.-Y. Effect of surfactants on the structure of PMMA membranes. J. Membr. Sci. 123 (1997) 281
23. Wang D.-M., Lin F.-C., Wu T.-T., and Lai J.-Y. Formation mechanism of the macrovoids induced by surfactant additives. J. Membr. Sci. 142 (1998) 191
24. Lai J.-Y., Lin F.-C., Wu T.-T., and Wang D.-M. On the formation of macrovoids in PMMA membranes. J. Membr. Sci. 155 (1999) 31
25. Tsai H.-A., Ruaan R.-C., Wang D.-M., and Lai J.-Y. Effect of temperature and span series surfactant on the structure of polysulfone membranes. J. Appl. Polym. Sci. 86 (2002) 166
26. Shinde M.H., Kulkarni S.S., Musale D.A., and Joshi S.G. Improvement of the water purification capability of poly(acrylonitrile) ultrafiltration membranes. J. Membr. Sci. 162 (1999) 9
27. Nouzaki K., Nagata M., Araib J., Idemotob Y., Kourab N., Yanagishita H., Negishi H., Kitamoto D., Ikegami T., and Haraya K. Preparation of polyacrylonitrile ultrafiltration membranes for wastewater treatment. Desalination 144 (2002) 53
28. Jung B., Yoon J.K., Kim B., and Rhee H.-W. Effect of crystallization and annealing on polyacrylonitrile membranes for ultrafiltration. J. Membr. Sci. 246 (2005) 67
29. Bhat A.A., and Pangarkar V.G. Methanol-selective membranes for the pervaporative separation of methanol-toluene mixtures. J. Membr. Sci. 167 (2000) 187
30. Yang M.-C., and Lin C.-C. Urea permeation and hydrolysis through hollow fiber dialyzer immobilized with unease. Biomaterials 22 (2001) 891
31. Lin C.-C., and Yang M.-C. Cholesterol oxidation using hollow fiber dialyzer immobilized with cholesterol oxidase: preparation and properties. Biotechnol. Prog. 19 (2003) 361
32. Qin J.-J., Cao Y.-M., Li Y.Q., Li Y., Oo M.-H., and Lee H. Hollow fiber ultrafiltration membranes made from blends of PAN and PVP. Sep. Purif. Technol. 36 (2004) 149
33. Nie F.-Q., Xu Z.-K., Yang Q., Wu J., and Wan L.-S. Surface modification of poly (acrylonitrile-co-maleic acid) membranes by the immobilization of poly(ethylene glycol). J. Membr. Sci. 235 (2004) 147
34. Nie F.-Q., Xu Z.-K., Huang X.-J., Ye P., and Wu J. Acrylonitrile-based copolymer membranes containing reactive groups: surface modification by the immobilization of poly (ethylene glycol) for improving antifouling property and biocompatibility. Langmuir 19 (2003) 9889
35. Xu Z.-K., Nie F.-Q., Qu C., Wan L.-S., Wu J., and Yao K. Tethering poly(ethylene glycol) to improve the surface biocompatibility of poly(acrylonitrile-co-maleic acid) asymmetric membranes. Biomaterials 26 (2005) 589
36. Ye P., Xu Z.-K., Wu J., Wang Z.-G., and Seta P. Comparison of hydrolytic activity in aqueous and organic media for lipase immobilized on poly(acrylonitrile-co-maleic acid) ultrafiltration hollow fiber membranes. J. Mol. Catal. B: Enzym. 32 (2005) 115
37. Ye P., Xu Z.-K., Che A.-F., Wu J., and Seta P. Chitosan-tethered poly(acrylonitrile-co-maleic acid) ultrafiltration hollow fiber membrane for lipase immobilization. Biomaterials 26 (2005) 6394
38. Taniguchi M., and Belfort G. Low protein fouling synthetic membranes by UV-assisted surface grafting modification: varying monomer type. J. Membr. Sci. 231 (2004) 147
39. Vilker V.L., Colton C.K., and Smith K.A. The osmotic pressure of concentrated and pH in saline solutions of bovine serum albumin. J. Colloid Interface Sci. 79 (1981) 548
40. Wang D.-M., Lin F.-C., Chiang J.-C., and Lai J.-Y. Control of the porosity of asymmetric TPX membranes. J. Membr. Sci. 141 (1998) 1
41. Tan J.M.A., Noh S.-H., Chowdhurry G., and Matsuura T. Influence of surface tensions of solvent/non-solvent mixtures in membrane casting solutions on the performance of poly(2,6-dimethyl-1,4-phenylene) oxide membranes for gas separation applications. J. Membr. Sci. 174 (2000) 225
42. Kim J.H., and Lee K.H. Effect of PEG additive on membrane formation by phase-inversion. J. Membr. Sci. 138 (1998) 153
43. Kraus M.A., Nemas M., and Frommer M.A. The effect of low molecular weight additives on the properties of aromatic polyamide membranes. J. Appl. Polym. Sci. 23 (1979) 445