Eco-friendly face milling of titanium alloy

International Journal of Precision Engineering and Manufacturing

Volumn 15, Issue 6, 2014, Pages 1159-1164

  Park, Kyung Hee ^a   Yang, Gi Dong ^a   Lee, Myung Gyu ^a   Jeong, Hoon ^a   Lee, Seok Woo ^a   Lee, Dong Yoon ^a  

^a Korea Institute of Industrial Technology   (South Korea)

Author keywords

Cryogenic machining; Eco friendly machining; Laser assisted machining; Minimum quantity lubrication; Titanium alloy; Tool wear

Indexed keywords

AEROSPACE INDUSTRY; COOLING; CRYOGENICS; CUTTING; CUTTING FLUIDS; ENERGY UTILIZATION; ENVIRONMENTAL PROTECTION; ENVIRONMENTAL TECHNOLOGY; FLOODS; GREEN MANUFACTURING; LUBRICATION; MILLING (MACHINING); TITANIUM ALLOYS; WEAR OF MATERIALS;

CRYOGENIC MACHINING; ECO-FRIENDLY; LASER ASSISTED MACHINING; MINIMUM QUANTITY LUBRICATION; TOOL WEAR;

CUTTING TOOLS;

EID: 84901919987     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-014-0451-5     Document Type: Article

References (26)

1. Ezugwu, E. O. and Wang, Z. M., "Titanium Alloys and their Machinability-a Review," Journal of Materials Processing Technology, Vol. 68, No. 3, pp. 262-274, 1997.
2. Ezugwu, E. O., "Key Improvements in the Machining of Difficultto-Cut Aerospace Superalloys," International Journal of Machine Tools and Manufacture, Vol. 45, No. 12, pp. 1353-1367, 2005.
3. Yang, X. and Richard Liu, C., "Machining Titanium and its Alloys," Machining Science and Technology, Vol. 3, No. 1, pp. 107-139, 1999.
4. Sandvik Coromant, "Milling of Titanium Alloys," http://www2. coromant. sandvik. com/coromant/pdf/aerospace/gas_turbines/C_2920_18_ENG_043_074. pdf (Accessed 20 MAY 2014).
5. Rahman, M., Wang, Z. G., and Wong, Y. S., "A Review on High-Speed Machining of Titanium Alloys," JSME International Journal, Series C, Vol. 49, No. 1, pp. 11-20, 2006.
6. Su, Y., He, N., Li, L., and Li, X., "An Experimental Investigation of Effects of Cooling/Lubrication Conditions on Tool Wear in High-Speed End Milling of Ti-6Al-4V," Wear, Vol. 261, No. 7, pp. 760-766, 2006.
7. Sun, J., Wong, Y. S., Rahman, M., Wang, Z. G., Neo, K. S., and et al., "Effects of Coolant Supply Methods and Cutting Conditions on Tool Life in End Milling Titanium Alloy," Machining Science and Technology, Vol. 10, No. 3, pp. 355-370, 2006.
8. Shokrani, A., Dhokia, V., and Newman, S. T., "Environmentally Conscious Machining of Difficult-to-Machine Materials with Regard to Cutting Fluids," International Journal of Machine Tools and Manufacture, Vol. 57, No. pp. 83-101, 2012.
9. Zeman, P. and Madl, J., "Milling of Ti6-Al-4V Alloy with Cemented Carbide Tools," Proc. of the 3rd International Conference on Manufacturing Engineering, pp. 155-164, 2008.
10. Yoo, S. S. and Kim, D. E., "Minimum Lubrication Technique using Silicone Oil for Friction Reduction of Stainless Steel," Int. J. Precis. Eng. Manuf., Vol. 14, No. 6, pp. 875-880, 2013.
11. Wang, C. D., Chen, M., An, Q. L., Wang, M., and Zhu, Y. H., "Tool Wear Performance in Face Milling Inconel 182 using Minimum Quantity Lubrication with Different Nozzle Positions," Int. J. Precis. Eng. Manuf., Vol. 15, No. 3, pp. 557-565, 2014.
12. Hong, S. Y. and Ding, Y., "Cooling Approaches and Cutting Temperatures in Cryogenic Machining of Ti-6Al-4V," International Journal of Machine Tools and Manufacture, Vol. 41, No. 10, pp. 1417-1437, 2001.
13. Venugopal, K., Paul, S., and Chattopadhyay, A., "Growth of Tool Wear in Turning of Ti-6Al-4V Alloy under Cryogenic Cooling," Wear, Vol. 262, No. 9, pp. 1071-1078, 2007.
14. Kim, G. H., Yoon, G. S., Son, J. I., and Cho, M. W., "Investigation on the Effect of Low Temperature Micro Cutting Process for Mold Core Material," Int. J. Precis. Eng. Manuf., Vol. 13, No. 5, pp. 783-788, 2012.
15. Hong, S. Y. and Ding, Y., "Cooling Approaches and Cutting Temperatures in Cryogenic Machining of Ti-6Al-4V," International Journal of Machine Tools and Manufacture, Vol. 41, No. 10, pp. 1417-1437, 2001.
16. Umbrello, D., Pu, Z., Caruso, S., Outeiro, J., Jayal, A., and et al., "The Effects of Cryogenic Cooling on Surface Integrity in Hard Machining," Procedia Engineering, Vol. 19, pp. 371-376, 2011.
17. Chryssolouris, G., Anifantis, N., and Karagiannis, S., "Laser Assisted Machining: an Overview," Journal of Manufacturing Science and Engineering, Vol. 119, No. 4B, pp. 766-769, 1997.
18. Ding, X. Z., Samani, M., and Chen, G., "Thermal Conductivity of PVD TiAlN Films using Pulsed Photothermal Reflectance Technique," Applied Physics A, Vol. 101, No. 3, pp. 573-577, 2010.
19. Kim, K. S., Kim, J. H., Choi, J. Y., and Lee, C. M., "A Review on Research and Development of Laser Assisted Turning," Int. J. Precis. Eng. Manuf., Vol. 12, No. 4, pp. 753-759, 2011.
20. Jung, J. W., Choi, J. Y., and Lee, C. M., "A Study on Laser Assisted Machining using a Laser Area Analysis Method," Int. J. Precis. Eng. Manuf., Vol. 14, No. 2, pp. 329-332, 2013.
21. Park, K. H. and Kwon, P. Y., "Flank Wear of Multi-Layer Coated Tool and Wear Prediction Using Abrasion Wear Model," Proc. of ASME International Manufacturing Science and Engineering Conference, pp. 331-340, 2009.
22. Dandekar, C. R., Shin, Y. C., and Barnes, J., "Machinability Improvement of Titanium Alloy (Ti-6Al-4V) Via LAM and Hybrid Machining," International Journal of Machine Tools and Manufacture, Vol. 50, No. 2, pp. 174-182, 2010.
23. Pusavec, F., Krajnik, P., and Kopac, J., "Transitioning to Sustainable Production-Part I: Application on Machining Technologies," Journal of Cleaner Production, Vol. 18, No. 2, pp. 174-184, 2010.
24. Sun, S., Harris, J., and Brandt, M., "Parametric Investigation of Laser-Assisted Machining of Commercially Pure Titanium," Advanced Engineering Materials, Vol. 10, No. 6, pp. 565-572, 2008.
25. Zamani, H., Hermani, J. P., Sonderegger, B., and Sommitsch, C., "Numerical and Experimental Investigation of Laser Assisted Side Milling of Ti6Al4V Alloy," Proc. of Materials Science & Technology Conference and Exhibition, pp. 1526-1533, 2012.
26. Sun, S., Brandt, M., Barnes, J. E., and Dargusch, M. S., "Investigation of the Cutting Forces and Tool Wear in Laser Assisted Milling of Ti6Al4V Alloy," Proc. of the 36th International MATADOR Conference, Vol. 3, pp. 255-258, 2010.