A review and perspective of existing research on the release of nanomaterials from solid nanocomposites

Particle and Fibre Toxicology

Volumn 11, Issue 1, 2014, Pages

  Froggett, Stephan J ^a   Clancy, Shaun F ^b   Boverhof, Darrell R ^c   Canady, Richard A ^d  

^a Froggett and Associates LLC   (United States)

^b Evonik Degussa Corporation   (United States)

^c DOW CHEMICAL COMPANY   (United States)

^d International Life Sciences Institute   (United States)

Author keywords

Consumer products; Exposure; Nanocomposite; Nanomaterial release; Nanotechnology; Release methodology

Indexed keywords

NANOCOMPOSITE; NANOMATERIAL; NANOPARTICLE;

AQUEOUS WEATHERING; CUTTING; DENTAL MACHINING; DRILL; FILTRATION; GRINDING; INCINERATION; INVESTIGATIVE PROCEDURES; MACHINING; NANOBIOTECHNOLOGY; PRIORITY JOURNAL; RECYCLING; REVIEW; RISK ASSESSMENT; SANDING; SHREDDING; WASHING; WASTE DISPOSAL;

ANIMALS; DENTAL MATERIALS; HUMANS; INCINERATION; NANOCOMPOSITES; NANOSTRUCTURES; NANOTECHNOLOGY; RISK ASSESSMENT; SWEAT; ULTRAVIOLET RAYS;

EID: 84900795547     PISSN: None     EISSN: 17438977     Source Type: Journal    
DOI: 10.1186/1743-8977-11-17     Document Type: Review

References (131)

1. ISO TC 229 ISO/WI TS 80004-4 2010, International Standards Organization, ISO TC 229.
2. Bauer F, Saunderland V, Gläsel H, Ernst H, Findeisen M, Hartmann E, Langguth H, Marquardt B, Mehnert R. Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles, 3. Effect of filler particles and grafting agents. Macromol Mater Eng 2002, 287:546-552.
3. Gläsel H, Bauer F, Ernst H, Findeisen M, Hartmann E, Langguth H, Mehnert R, Schubert R. Preparation of scratch and machining resistant polymeric nanocomposites by monomer grafting onto nanoparticles, 2. Characterization of radiation-cured polymeric nanocomposites. Macromol Chem Phys 2000, 201:2765-2770.
4. Sepeur S, Kunze N, Schmidt W. UV curable hard coatings on plastics. Thin Solid Films 1999, 351:216-9.
5. Hendren C, Mesnard X, Droge J, Wiesner M. Estimating production data for five engineered nanomaterials as a basis for exposure assessment. Environ Sci Technol 2011, 45:2562-2569. 10.1021/es103300g, 21391627.
6. Piccinno F, Gottschalk F, Seeger S, Nowack B. Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world. J Nanopart Res 2012, 14:1109.
7. Forster S, Olveria S, Seeger S. Nanotechnology in the market: promises and realities. Int J Nanotechnol 2011, 8:592-613.
8. Lam C, James JT, McCluskey R, Arepalli S, Hunter R. A review of carbon nanotubes toxicity and assessment of potential occupational and environmental health risks. Crit Rev Toxicol 2006, 36:189-217. 10.1080/10408440600570233, 16686422.
9. Maynard A. Nanotechnology: the next big thing, or much ado about nothing?. Ann Occup Hyg 2007, 5:1.
10. Warheit DB. Nanoparticles: Health impacts?. Mater Today 2004, 7:32-35.
11. Gottschalk F, Nowack B. The release of engineered nanomaterials to the environment. J Environ Monit 2011, 13:1145. 10.1039/c0em00547a, 21387066.
12. Nowack B. Is anything out there? What life cycle perspectives of nano-products can tell us about nanoparticles in the environment. Nano Today 2009, 4:11-12.
13. Petersen E, Zhang L, Mattison N, O'Carroll D, Whelton A, Uddin N, Nguyen T, Huang Q, Henry T, Holbrook R, Chen K. Potential release pathways, environmental fate, and ecological risks of carbon nanotubes. Environ Sci Technol 2011, 45:9837-9856. 10.1021/es201579y, 21988187.
14. Kuempel E, Castranova V, Geraci C, Schulte P. Development of risk-based nanomaterial groups for occupational exposure control. J. Nanopart Res 2012, 14:1029.
15. Methner M, Birch M, Evans D, Ku B, Crouch K, Hoover M. Identification and characterization of potential sources of worker exposure to carbon nanofibers during polymer composite laboratory operations. J Occup Environ Hyg 2007, 4:125-130.
16. Kuhlbusch T, Asbach C, Fissan H, Göhler D, Stintz M. Nanoparticle exposure at nanotechnology workplaces: a review. Part Fibre Toxicol 2011, 8:22. 10.1186/1743-8977-8-22, 3162892, 21794132.
17. Reijnders L. The release of TiO2 and SiO2 nanoparticles from nanocomposites. Poly Degrad Stab 2009, 94:873-876.
18. Froggett S. Review of release from solids embedded or coated with nanomaterials. 2011, [http://www.ilsi.org/ResearchFoundation/Documents/NanoRelease%20Background%20Doc.pdf].
19. Göhler D, Nogowski A, Fiala P, Stintz M. Nanoparticle release form nanocomposites due to mechanical treatment at two stages of the life-cycle. J Phys: Conf Ser 2013, 429:012045.
20. Keller A, McFerran S, Lazareva A, Suh S. Global life cycle releases of engineered nanomaterials. J Nanopart Res 2013, 15:1692.
21. Nowack B, Ranville J, Diamond S, Gallego-Urrea J, Metcalfe C, Rose J, Horne N, Koelmans A, Klaine S. Potential scenarios for nanomaterial release and subsequent alteration in the environment. Environ Tox Chem 2012, 31:50-59.
22. Kruschov M. Principles of abrasive wear. Wear 1974, 28:69-88.
23. Mulhearn T, Samuels L. The machining of metals: a model of the process. Wear 1962, 5:478-798.
24. Rabinowicz E. Friction and Wear of Materials 1995, 192-195. New York: Wiley, 2.
25. Bello D, Wardle BL, Yamamoto N, De Villoria RG, Garcia EJ, Hart AJ, Ahn K, Ellenbecker MJ, Hallock M. Exposure to nanoscale particles and fiber during Abrasion of hybrid advanced composites containing carbon nanotubes. J Nanopart Res 2009, 11:231-249.
26. Methner M, Crawford C, Geraci C. Evaluation of the potential airborne release of carbon nanofibers during the preparation, grinding and cutting of epoxy-based nanocomposite material. J Occup Environ Hyg 2012, 9:308-318. 10.1080/15459624.2012.670790, 22545869.
27. Ogura I, Kotake M, Shigeta M, Ueijima M, Saito K, Hashimoto N, Kishimoto A. Potential release of carbon nanotubes from their composites during grinding. J Phys: Conf Ser 2013, 429:012049.
28. Raynor P, Cebula J, Spangenberger J, Olson B, Dasch J, D'Arcy J. Assessing potential nanoparticle release during nanocomposite shredding using direct-reading instruments. J Occup Environ Hyg 2012, 9:1-13. 10.1080/15459624.2012.633061, 22168254.
29. Koponen IK, Jensen KA, Schneider T. Sanding dust from nanoparticle containing paints: physical characterization. J Phys: Conf Ser 2009, 151:012048.
30. Choe P, Trunov M, Grinshpun S, Willeke K, Harney J, Trakumas S, Mainelis G, Bornschein R, Clark S, Friedman W. Particle setting after lead-based paint abatement work and clearance waiting period. Am Ind Hyg Assoc J 2000, 61:798-807.
31. Scholz P, Materna B, Harrington D, Uratsu C. Residential and commercial painters' exposure to lead during surface preparation. Am Ind Hyg Assoc J 2002, 63:22-28.
32. Thorpe A, Brown R. Measurements of the effectiveness of dust extraction systems of hand sanders used on wood. Ann Occup Hyg 1994, 38:279-302. 10.1093/annhyg/38.3.279, 8048789.
33. Szymanczak W, Menzel N, Keck L. Emission of ultrafine copper particles by universal motors controlled by phase angle modulation. J Aerosol Sci 2007, 38:520-531.
34. Koponen IK, Jensen KA, Schneider T. Comparison of dust released from sanding conventional and nanoparticle doped wall and wood coatings. J Expo Sci Environ Epidemiol 2011, 21:408-418. 10.1038/jes.2010.32, 3119175, 20485339.
35. Saber A, Koponen I, Jensen K, Jacobsen N, Mikkelsen L, Moller P, Loft S, Vogel U, Wallin H. Inflammatory and genotoxic effects of sanding dust generated from nanoparticle-containing paints and lacquers. Nanotoxicology 2012, 6:776-788. 10.3109/17435390.2011.620745, 21995293.
36. Göhler D, Stintz M, Hillemann L, Vorbau M. Characterization of nanoparticle release from surface coatings by the simulation of a sanding process. Ann Occup Hyg 2010, 54:615-624. 10.1093/annhyg/meq053, 2918492, 20696941.
37. Wohlleben W, Brill S, Meier M, Mertler M, Cox G, Hirth S, von Vacano B, Strauss V, Treumann S, Wiench K, Ma-Hock L, Landsiedel R. On the lifecycle of nanocomposites: comparing released fragments and their in-vivo hazards from three release mechanisms and four nanocomposites. Small 2011, 7:2384-2395. 10.1002/smll.201002054, 21671434.
38. Cena L, Peters T. Characterization and control of airborne particles emitted during production of epoxy/carbon nanotube nanocomposites. J Occup Environ Hyg 2011, 8:86-92. 10.1080/15459624.2011.545943, 21253981.
39. Wohlleben W, Meier MW, Vogel S, Landsiedel R, Cox G, Hirth S, Tomovic Z. Elastic CNT-polyurethane nanocomposite: synthesis, performance and assessment of fragments released during use. Nanoscale 2013, 5:369-380. 10.1039/c2nr32711b, 23172121.
40. Hirth S, Cena L, Cox G, Tomovic Z, Peters T, Wohlleben W. Scenarios and methods that induce protruding or released CNTs after degradation of nanocomposite materials. J Nanopart Res 2013, 15:1504. 3625415, 23596358.
41. Huang G, Park J, Cena L, Shelton B, Peters T. Evaluation of airborne particle emissions from commercial products containing carbon nanotubes. J Nanopart Res 2012, 14:1231. 3507461, 23204914.
42. Schlagenhauf L, Chu B, Buha J, Nüesch F, Wang J. Release of carbon nanotubes from an epoxy-based nanocomposite during an Machining process. Environ Sci Technol 2012, 46:7366-7372. 10.1021/es300320y, 22662874.
43. Sachse S, Silva F, Irfan A, Zhu H, Pielichowski K, Leszczynska A, Blazquez M, Kazmina O, Kuzmenko O, Njuguna J. Physical characteristics of nanoparticles emitted during drilling of silica based polyamide 6 nanocomposites. Conf Ser Mater Sci Eng 2012, 40:012012.
44. Sachse S, Silva F, Zhu H, Irfan A, Leszczynska A, Pielichowski K, Ermini V, Blazquez M, Kuzmenko O, Njuguna J. The effect of nanoclay on dust generation during drilling of PA6 nanocomposites. J Nanomater 2012, 2012:189386.
45. Bello D, Wardle BL, Zhang J, Yamamoto N, Santeufemio C, Hallock M, Virji MA. Characterization of exposures to nanoscale particles and fibers during solid core drilling of hybrid carbon nanotube advanced composites. Int J Occup Environ Health 2010, 16:434-450. 10.1179/107735210799159996, 21222387.
46. Golanski L, Guiot A, Tardif F. New Method for the Characterization of Machining-Induced Nanoparticle Release into air from Nanomaterials. Proceedings of the NSTI-NanoTech 2010 Conference: 21-24 June 2010, Anaheim, CA, Taylor & Francis.
47. Golanski L, Gaborieau A, Guiot A, Uzu G, Chatenet J, Tardif F. Characterization of machining-induced nanoparticle release from paints into liquids and air. J Phys: Conf Ser 2011, 304:012062.
48. Golanski L, Guiot A, Pras M, Malarde M, Tardif F. Release-ability of nano fillers from different nanomaterials (toward the acceptability of nanoproduct). J Nanopart Res 2012, 14:962.
49. Guiot A, Golanski L, Tardif F. Measurement of nanoparticle removal by machining. J Phys: Conf Ser 2009, 170:012014.
50. Vorbau M, Hillemann L, Stintz M, Vorbau M, Hillemann L, Stintz M. Method for the characterization of the Machining induced nanoparticles release into air from surface coatings. J Aerosol Sci 2009, 40:209-217.
51. ASTM G195-08 Standard guide for conducting wear tests using rotary platform, double-head abraser. 2008, American Society for Testing and Materials, ASTM G195-08.
52. ISO 5470-1 Rubber or Plastics-Coated Fabrics. Determination of Machining Resistance 1999, Taber Abrader: International Standards Organization, ISO 5470-1.
53. ISO 7784-1 Paints and Varnishes, Determination of Resistance to Machining: Rotating Abrasive-Paper-Covered-Wheel Method 1997, ISO 7784-1.
54. Tardiff F, Malarde M, Golanski L, Guiot A, Pras M. Release-ability of nano fillers from different nanomaterials Part 1: aerosolization of nanoparticles just deposited at the top surface. Proceedings of the NSTI-Nanotech 2011, Boston MA, Taylor & Francis.
55. Moreau J, Weir M, Giuseppetti A, Chow L, Antonucci J, Xu H. Long-term mechanical durability of dental nanocomposites containing amorphous calcium phosphate nanoparticles. J Biomed Mater Res Part B: Appl Biomater 2012, 100:1264-1273. 3373274, 22514160.
56. ISO 11341 Paints and varnishes - Artificial weathering exposure to artificial radiation - Exposure to filtered xenon-arc radiation 2004, International Standards Organization, ISO 11341.
57. ISO 3892-2 Metallic and Other Inorganic Coatings, Methods of Inspection and Coordination of Test Methods 2006, International Standards Organization, ISO 3892-2.
58. ISO 4892-2 Plastics - Methods of exposure to laboratory light sources 2006, International Standards Organization, ISO 4892-2.
59. Kaegi R, Ulrich A, Sinnet B, Vonbank R, Wichser A, Zuleeg S, Simmler H, Brunner S, Vonmont H, Burkhardt M, Boller M. Synthetic TiO2 nanoparticle emission from exterior facades into the aquatic environment. Environ Pollut 2008, 156:233-239. 10.1016/j.envpol.2008.08.004, 18824285.
60. Al-Kattan A, Wichser A, Vonbank R, Brunner S, Ulrich A, Zuin S, Nowack B. Release of TiO2 from paints containing pigment-TiO2 or nano-TiO2 by weathering. Environ Sci: Process Impacts 2013, 15:2186-2193. 10.1039/c3em00331k, 24056809.
61. Day R. The role of titanium dioxide pigments in the degradation and stabilization of polymers in the plastics industry. Polym Degrad Stab 1990, 29:73-92.
62. Kaempf G, Papernroth W, Holm R. Degradation processes in TiO2-pigmented paint films on exposure to weathering. J Paint Technol 1974, 46:56-63.
63. Allen N, Edge M, Ortega A, Sandoval G, Liauw C, Verran J, Stratton J, McIntyre R. Photocatalytic titania based surfaces: environmental benefits. Polym Degrad Stabil 2004, 85:927-946.
64. Nowack B, Bucheli T. Occurrence, behavior and effects of nanoparticles in the environment. Environ Pollut 2007, 150:5-22. 10.1016/j.envpol.2007.06.006, 17658673.
65. Zanna S, Saulou C, Mercier-Bonin M, Despax B, Raynaud P, Seyeux A, Marcus P. Ageing of plasma-mediated coatings with embedded silver nanoparticles on stainless steel: An XPS and ToF-SIMS investigation. Appl Surf Sci 2010, 256:6499-6505.
66. Vilar G, Fernández-Rosas E, Puntes V, Jamier V, Aubouy L, Vázquez-Campos S. Monitoring migration and transformation of nanomaterials in polymeric composites during accelerated aging. J Phys: Conf Ser 2013, 429:012044.
67. Busquets-Fité M, Fernandez E, Janer G, Vilar G, Vázquez-Campos S, Zanasca R, Citterio C, Mercante L, Puntes V. Exploring release and recovery of nanomaterials from commercial polymeric nanocomposites. J Phys: Conf Ser 2013, 429:012048.
68. Bernard C, Nguyen T, Pellegrin B, Holbrook R, Zhao M, Chin J. Fate of grapheme in polymer nanocomposite exposed to UV radiation. J Phys: Conf Ser 2011, 304:012063.
69. Gorham J, Nguyen T, Bernard C, Stanley D, Holbrook R. Photo-induced surface transformations of silica nanocomposites. Surf Interface Anal 2012, 44:1572-1581.
70. Nguyen T, Pellegrin B, Bernard C, Gu X, Gorham JM, Stutzman P, Stanley D, Shapiro A, Byrd E, Hettenhouser R, Chin J. Fate of nanoparticles during life cycle of polymer nanocomposites. J Phys: Conf Ser 2011, 304:012060.
71. Nguyen T, Pellegrin B, Bernard C, Rabb S, Stuztman P, Gorham J, Gu X, Yu L, Chin J. Characterization of surface accumulation and release of nanosilica during irradiation of polymer nanocomposites by ultraviolet light. J Nanoscience and Nanotechnology 2012, 12(8):6202-6215.
72. Rabb S, Yu L, Bernard C, Nguyen T. An Analytical Method to Quantify Silica Nanoparticles Accumulated on the Surface of Polymer Nanocomposites Exposed to UV Radiation. Proceedings of the NSTI-NanoTech.: June 21-24 2010 2010, Anaheim CA, Taylor & Francis, 978-1-4398-3401-5.
73. Hsu L, Chein H. Evaluation of nanoparticles emission for TiO2 nanopowder coating materials. J Nanopart Res 2007, 9:157-163.
74. Kaegi R, Sinnet B, Zuleeg S, Hagendorfer H, Mueller E, Vonbank R, Boller M, Burkhardt M. Release of silver nanoparticles from outdoor facades. Environ Pollut 2010, 158:2900-2905. 10.1016/j.envpol.2010.06.009, 20621404.
75. Olabarrieta J, Zorita S, Peña I, Rioja N, Monzón O, Benburia P, Scifo L. Aging of photocatalytic coatings under a water flow: Long run performance and TiO2 nanoparticle release. Appl Catal B: Environ 2012, 182:123-124.
76. Chin J, Byrd E, Embree N, Garver J, Dickens B. Accelerated UV weathering device based on integrating sphere technology. Review of Scientific Instruments 2004, 75(11):4951-4959.
77. Pellegrin B, Nguyen T, Mermet L, Shapiro A, Gu X, Chin J. Degradation and nanoparticle release of epoxy/nanosilica composites exposed to solar UV radiation. Nanotech 2009, 1:94-97.
78. Nanocyl PLASTICYL™ Carbon Nanotubes Conductive Masterbatches technical data sheet. 2013, [http://www.nanocyl.com/en/Products-Solutions/Products/PLASTICYL-Carbon-Nanotubes-Conductive-Masterbatches], Nanocyl.
79. Benn T, Westerhoff P. Nanoparticle silver released into water from commercially available sock fabrics. Environ Sci Technol 2008, 42:4133-4139. 10.1021/es7032718, 18589977.
80. Wijnhoven S, Peijnenburg W, Herberts C, Hagens W, Oomen A, Heugens E, Roszek B, Bisschops J, Gosens I, van de Meent D, Dekkers S, de Jong W, van Zijverden M, Sips A, Geertsma R. Nano-silver - a review of available data and knowledge gaps in human and environmental risk assessment. Nanotoxicology 2009, 3(2):109-138.
81. Geranio L, Heuberger M, Nowack B. The behavior of silver nanotextiles during washing. Environ Sci Technol 2009, 43:8113-8118. 10.1021/es9018332, 19924931.
82. Pasricha A, Jangra SL, Singh N, Dilbaghi N, Sood KN, Arora K, Pasricha R. Comparative study of leaching of silver nanoparticles from fabric and effective effluent treatment. J Environ Sci 2013, 24:852-859.
83. Benn T, Cavanagh B, Hristovski K, Posner J, Westerhoff P. The release of nanosilver from consumer products used in the home. J Environ Qual 2010, 39:1875-1882. 10.2134/jeq2009.0363, 21284285.
84. Lorenz C, Windler L, von Goetz N, Lehmann R, Schuppler M, Hungerbühler K, Heuberger M, Nowack B. Characterization of silver release from commercially available functional (nano) textiles. Chemosphere 2012, 89:817-24. 10.1016/j.chemosphere.2012.04.063, 22677521.
85. Windler L, Lorenz C, von Goetz N, Hungerbühler K, Amberg M, Heuberger M, Nowack B. Release of titanium dioxide from textiles during washing. Env Sci Technol 2012, 46:8181-8188.
86. Ren D, Smith J. Retention and transport of silver nanoparticles in a ceramic porous medium used for point-of-use water treatment. Environ Sci Technol 2013, 47:3825-3832. 10.1021/es4000752, 23496137.
87. Bielefeldt A, Stewart M, Mansfield E, Summers RS, Ryan J. Effects of chlorine and other water quality parameters on the release of silver nanoparticles from ceramic surface. Water Res 2013, 47:4032-4039. 10.1016/j.watres.2013.01.058, 23582350.
88. Nowack B, Krug H, Height M. 120 years of nanosilver history: Implications for policy makers. Environ Sci Technol 2011, 45:1177-1183. 10.1021/es103316q, 21218770.
89. ISO 105-C06 Tests for Color Fastness to Domestic and Commercial Laundering 1994, International Standards Organization, ISO 105-C06.
90. Clasen T, Robert I, Rabie T, Schmidt W, Cairncross S. Interventions to improve water quality for preventing diarrhea. Cochrane Database Syst Rev 2006, 3:104.
91. Hunter P. Household water treatment in developing countries: comparing different intervention types using meta-regression. Environ Sci Technol 2009, 137:407-415.
92. Rayner J. Current Practices in Manufacturing of Ceramic pot Filters for Water Treatment. Master's Thesis 2009, Loughborough University, UK: Department of Civil and Building Engineering.
93. Kallman E, Oyanedel-Craver V, Smith J. Ceramic filters impregnated with silver nanoparticles for point-of-use water treatment in rural Guatemala. J Environ Eng 2011, 137:407-415.
94. Nardo R. Factory startup manual: for the production of ceramic water filter. 2005, [https://www.engineeringforchange.org/static/content/Water/S00067/Production%20Manual%20Iraq.pdf].
95. Oyanedel-Craver V, Smith J. Sustainable colloidal-silver-impregnated ceramic filter for point-of-use water treatment. Environ Sci Technol 2008, 42:927-933. 10.1021/es071268u, 18323124.
96. Choi O, Hu Z. Nitrification inhibition by silver nanoparticles. Water Sci Technol 2009, 59:1699-1702. 10.2166/wst.2009.205, 19448303.
97. Dankovich T, Gray D. Bactericidal paper impregnated with silver nanoparticles for point-of-use water treatment. Environ Sci Technol 2011, 45:1992-1998. 10.1021/es103302t, 21314116.
98. Bielefeldt A, Kowalski K, Schilling C, Schreier S, Kohler A, Summers R. Removal of virus to protozoan sized particles in point-of-use ceramic water filters. Water Res 2010, 44:1482-1488. 10.1016/j.watres.2009.10.043, 19926110.
99. Ward M, Buttry D. In situ interfacial mass detection with piezoelectric transducers. Science 1990, 249:1000-1007. 10.1126/science.249.4972.1000, 17789608.
100. Bechert T, Böswald M, Lugauer S, Regenfus A, Greil J, Guggenbichler J. The Erlanger silver catheter: In vitro results for antimicrobial activity. Infection 1999, 26(Suppl 1):S24-29.
101. Böswald M, Lugauer S, Regenfus A, Braun G, Martus P, Geis C, Scharf J, Bechert T, Greil J, Guggenbichler J. Reduced rates of catheter-associated infection by use of a new silver-impregnated central venous catheter. Infection 1999, 26(Suppl 1):S56-60.
102. Carbon R, Lugauer S, Geitner U, Regenfus A, Böswald M, Greil J, Bechert T, Hummer H, Guggenbicher J. Reducing catheter-associated infection with silver-impregnated catheters in long-term therapy children. Infection 1999, 26(Suppl 1):S69-73.
103. Kulthong K, Srisung S, Boonpavanitchakul K, Kangwansupamonkon W, Maniratanachote R. Determination of silver nanoparticle release from antibacterial fabrics into artificial sweat. Part Fibre Toxicol 2010, 7:8. 10.1186/1743-8977-7-8, 2861638, 20359338.
104. von Goetz N, Lorenz C, Windler L, Nowack B, Heuberger M, Hungerbühler K. Migration of Ag- and TiO2 (nano) particles from textiles into artificial sweat under physical stress: Experiments and exposure modeling. Environ Sci Technol 2013, 47:9979-9987. 10.1021/es304329w, 23786648.
105. Sachse S, Gendre L, Silva F, Zhu H, Leszczynska A, Pielichowski K, Ermini V, Njuguna J. On nanoparticles release from polymer nanocomposites for applications in lightweight automotive components. J Phys: Conf Ser 2013, 429:012046.
106. AATCC test Method 15 Color Fastness to Perspiration 2002, American Association of Textile Chemists and Colorists, AATCC test Method 15.
107. BS EN1811 Reference test method for nickel release from products intended to come into prolonged contact with the skin. 1999, British Standards Institute, BS EN1811.
108. ISO 105-E04 Textiles, Tests for Color Fastness to Perspiration Artificial Sweat 2013, International Standards Organization, ISO 105-E04.
109. Joyce-Wöhrmann R, Hentschel T, Münstedt H. Thermoplastic silver-filled polyurethanes for antimicrobial catheters. Adv Eng Mater 2000, 2:380-386.
110. Bourbigot S, Duquesne S, Jama C. Polymer nanocomposites: How to reach low flammability?. Macromol Symposia 2006, 233(1):180-190.
111. Bourbigot S, Duquesne S. Fire retardant polymers: recent developments and opportunities. J Mater Chem 2007, 17:2283-2300.
112. Bourbigot S, Vanderhart DL, Gilman JW, Bellayer S, Stretz H, Paul DR. Solid state NMR characterization and flammability of styrene-acrylonitrile copolymer montmorillonite nanocomposite. Polymer 2004, 45:7627-7638.
113. Bourbigot S, Samyn F, Turf T, Duquesne S. Nanomorphology and reaction to fire of polyurethane and polyamide nanocomposites containing flame retardants. Polym Degrad Stabl 2010, 95:320-326.
114. Kashiwagi T, Harris RH, Zhang X, Briber RM, Cipriano BH, Raghavan SR, Awad WH, Shields JR. Flame retardant mechanism of polyamide 6-clay nanocomposites. Polymer 2004, 45:881-891.
115. Qin H, Su Q, Zhang S, Zhaoa B, Yan M. Thermal stability and flammability of polyamide66/montmorillonite nanocomposites. Polymer 2003, 44:7533-38.
116. Song L, Hu Y, Tang Y, Zhang R, Chena Z, Fa W. Study of the properties of flame retardant polyurethane/organoclay nanocomposite. Polym Degrad Stab 2005, 87:111-116.
117. Zhu J, Morgan AB, Lamelas FJ, Wilkie CA. Fire properties of polystyrene-clay nanocomposites. Chem Mater 2001, 13:3774-3780.
118. Kashiwagi T, Grulke E, Hilding J, Groth KM, Harris R, Butler K, Shields JR, Kharchenko S, Douglas J. Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites. Polymer 2004, 45:4227-4239.
119. Kashiwagi T, Du F, Winey KI, Groth KM, Shields JR, Bellayer SP, Kim H, Douglas JF. Flammability properties of polymer nanocomposites with single-walled carbon nanotubes: effects of nanotube dispersion and concentration. Polymer 2005, 46:471-481.
120. Li J, Tong L, Fang Z, Gu A, Xu Z. Thermal degradation behavior of multi-walled carbon nanotubes/polyamide 6 composites. Poly degrade Stab 2006, 91:2046-2052.
121. Yang S, Castilleja J, Barrera E, Lozano K. Thermal analysis of an acrylonitrile-butadiene-styrene/SWNT composite. Poly Degrad and Stab 2004, 83:383-388.
122. Nyden M, Gilman J. Molecular dynamics simulations of the thermal degradation of nano-confined polypropylene. Comp Theor Polymer Sci 1997, 7:191-198.
123. Mosurkal R, Samuelson L, Smith K, Westmoreland P, Parmar V, Yan F, Kumar J, Watterson A. Nanocomposites of TiO2 and siloxane copolymers as environmentally safe flame-retardant materials. J Macromol Sci, Part A: Pure Appl Chem 2008, 45:943-947.
124. Motzkus C, Chivas-Joly C, Guillaume E, Ducourtieux S, Saragoza L, Lesenechal D, Mace T. Characterization of aerosol emitted by the combustion of nanocomposites. J Phys: Conf Ser 2011, 304:12020.
125. Uddin N, Nyden MR. Characterization of Nanoparticle Release from Polymer Nanocomposites due to Fire. Proceedings of the Nano-Tech 2011 Conference: 13-16 June 2011 2011, 526-532. Boston MA, Taylor & Francis.
126. Bouillard JX, R'Mili B, Moranviller D, Vignes A, Le Bihan O, Ustache A, Bomfim JAS, Frejafon E, Fleury D. Nanosafety by design: risks from nanocomposite/nanowaste combustion. J Nanopart Res 2013, 15:1519-1530.
127. ISO 5660-1 Reaction to fire tests - Heat release, smoke production and mass loss rate. Part 1: Heat release rate (cone calorimeter method) 2002, International Standards Organization, ISO 5660-1.
128. Brook R, Rajagopalan S, Pope C, Brook J, Bhatnagar A, Diez-Roux A, Holguin F, Hong Y, Luepker R, Mittleman M, Peters A, Siscovick D, Smith S, Whitsel L, Kaufman J. Particulate matter air pollution and cardiovascular disease: an update to the scientific statement from the American heart association. Circulation 2010, 121:2331-2378. 10.1161/CIR.0b013e3181dbece1, 20458016.
129. Weir A, Westerhoff P, Fabricius L, Hirstovski K, von Goetz N. Titanium dioxide nanoparticles in food and personal care products. Env Sci Technol 2012, 46:2242-2250.
130. Wigginton N, Haus K, Hochella M. Aquatic environmental nanoparticles. J Environ Monit 2007, 9:1306-1316. 10.1039/b712709j, 18049768.
131. Vargas I, Pavissich J, Olivares T, Jeria G, Cienfuegos R, Pastén P, Pizarro G. Increase of the concentration of dissolved copper in drinking water systems due to flow-induced nanoparticle release from surface corrosion by-products. Corr Sci 2010, 52:3492-3503.