New porous polycaprolactone-silica composites for bone regeneration

Materials Science and Engineering C

Volumn 40, Issue , 2014, Pages 418-426

  Plazas Bonilla, Clara E ^a,b   Trujillo, Sara ^b   Demirdögen, Bermali ^c   Perilla, Jairo E ^a   Murat Elcin, Y ^c   Gómez Ribelles, José L ^b,d  

^a UNIVERSIDAD NACIONAL DE COLOMBIA   (Colombia)

^b UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^c ANKARA UNIVERSITY   (Turkey)

^d BIOMATERIALES Y NANOMEDICINA CIBER BBN   (Spain)

Author keywords

Bioactivity; Bone regeneration; Polycaprolactone silica composite; Porous polymer composites; Sol gel reaction

Indexed keywords

BIOACTIVITY; CATALYSIS; CATALYSTS; COMPOSITE MATERIALS; COMPOSITE MEMBRANES; ETHERS; HYDROXYAPATITE; MORPHOLOGY; POLYMERS; POLYOLS; POROUS MATERIALS; SOL-GEL PROCESS; SOL-GELS;

BONE REGENERATION; HOMOGENEOUS LAYERS; HYDROXYAPATITE LAYERS; INTERCONNECTED STRUCTURES; POROUS COMPOSITE MEMBRANES; POROUS POLYMERS; SOL-GEL REACTION; TETRAETHYL ORTHOSILICATES;

SILICA;

GEL; HYDROXYAPATITE; POLYCAPROLACTONE; POLYESTER; SILANE DERIVATIVE; SILICON DIOXIDE; TETRAETHOXYSILANE; WATER;

BONE REGENERATION; CHEMISTRY; GEL; PHYSIOLOGY; POROSITY; TEMPERATURE;

BONE REGENERATION; DURAPATITE; GELS; POLYESTERS; POROSITY; SILANES; SILICON DIOXIDE; TEMPERATURE; WATER;

EID: 84899834754     PISSN: 09284931     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msec.2014.04.024     Document Type: Article

References (49)

1. H. Chim, D.W. Hutmacher, A.M. Chou, A.L. Oliveira, R.L. Reis, T.C. Lim, and J. Schantz A comparative analysis of scaffold material modifications for load-bearing applications in bone tissue engineering Int. J. Oral Maxillofac. Surg. 35 2006 928 934 (Pubitemid 44566018)
2. S.A. Abbah, C.X.L. Lam, D.W. Hutmacher, J.C.H. Goh, and H. Wong Biological performance of a polycaprolactone-based scaffold used as fusion cage device in a large animal model of spinal reconstructive surgery Biomaterials 30 2009 5086 5093
3. M.T. Arafat, C.X.F. Lam, A.K. Ekaputra, S.Y. Wong, X. Li, and I. Gibson Biomimetic composite coating on rapid prototyped scaffolds for bone tissue engineering Acta Biomater. 7 2011 809 820
4. D.W. Hutmacher, T. Schantz, I. Zein, K.W. Ng, S.H. Teoh, and K.C. Tan Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling J. Biomed. Mater. Res. 55 2001 203 216 (Pubitemid 32198503)
5. J.M. Williams, A. Adewunmi, R.M. Schek, C.L. Flanagan, P.H. Krebsbach, S.E. Feinberg, S.J. Hollister, and S. Das Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering Biomaterials 26 2005 4817 4827 (Pubitemid 40347312)
6. L. Lu, Q. Zhang, D. Wootton, R. Chiou, D. Li, B. Lu, P. Lelkes, and J. Zhou Biocompatibility and biodegradation studies of PCL/β-TCP bone tissue scaffold fabricated by structural porogen method J. Mater. Sci. Mater. Med. 23 2012 2217 2226
7. J.C. Rodríguez Hernández, Á. Serrano Aroca, J.L. Gómez Ribelles, and M. Monleón Pradas Three-dimensional nanocomposite scaffolds with ordered cylindrical orthogonal pores J. Biomed. Mater. Res. B Appl. Biomater. 84B 2008 541 549
8. M. Lebourg, J. Suay Antón, and J.L. Gómez Ribelles Porous membranes of PLLA-PCL blend for tissue engineering applications Eur. Polym. J. 44 2008 2207 2218
9. L.A. Gaona, J.L. Gómez Ribelles, J.E. Perilla, and M. Lebourg Hydrolytic degradation of PLLA/PCL microporous membranes prepared by freeze extraction Polym. Degrad. Stab. 97 2012 1621 1632
10. D. Puppi, F. Chiellini, A.M. Piras, and E. Chiellini Polymeric materials for bone and cartilage repair Prog. Polym. Sci. 35 2010 403 440
11. H. Seyednejad, D. Gawlitta, R.V. Kuiper, A. de Bruin, C.F. van Nostrum, T. Vermonden, W.J.A. Dhert, and W.E. Hennink In vivo biocompatibility and biodegradation of 3D-printed porous scaffolds based on a hydroxyl-functionalized poly(ε-caprolactone) Biomaterials 33 2012 4309 4318
12. S. Eshraghi, and S. Das Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering Acta Biomater. 6 2010 2467 2476
13. K. Shin, Y. Koh, W. Choi, and H. Kim Production of porous poly(ε-caprolactone)/silica hybrid membranes with patterned surface pores Mater. Lett. 65 2011 1903 1906
14. M. Avella, M.E. Errico, P. Laurienzo, E. Martuscelli, M. Raimo, and R. Rimedio Preparation and characterisation of compatibilised polycaprolactone/ starch composites Polymer 41 2000 3875 3881 (Pubitemid 30116888)
15. M. Lebourg, R. Sabater Serra, J. Más Estellés, F. Hernández Sánchez, J.L. Gómez Ribelles, and J. Suay Antón Biodegradable polycaprolactone scaffold with controlled porosity obtained by modified particle-leaching technique J. Mater. Sci. Mater. Med. 19 2008 2047 2053 (Pubitemid 351422700)
16. M. Lebourg, J. Suay Antón, and J.L. Gómez Ribelles Hybrid structure in PCL-HAp scaffold resulting from biomimetic apatite growth J. Mater. Sci. Mater. Med. 21 2010 33 44
17. M.A. Woodruff, and W.D. Hutmacher The return of a forgotten polymer - polycaprolactone in the 21st century Prog. Polym. Sci. 35 2010 1217 1256
18. I. Kotela, J. Podporska, E. Soltysiak, K.J. Konsztowicz, and M. Blazewicz Polymer nanocomposites for bone tissue substitutes Ceram. Int. 35 2009 2475 2480
19. J. Wei, F. Chen, J. Shin, H. Hong, C. Dai, J. Su, and C. Liu Preparation and characterization of bioactive mesoporous wollastonite-polycaprolactone composite scaffold Biomaterials 30 2009 1080 1088
20. G. Chouzouri, and M. Xanthos In vitro bioactivity and degradation of polycaprolactone composites containing silicate fillers Acta Biomater. 3 2007 745 756 (Pubitemid 47209500)
21. P. Fabbri, V. Cannillo, A. Sola, A. Dorigato, and F. Chiellini Highly porous polycaprolactone-45S5 Bioglass® scaffolds for bone tissue engineering Compos. Sci. Technol. 70 2010 1869 1878
22. L. Shor, S. Güçeri, X. Wen, M. Gandhi, and W. Sun Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro Biomaterials 28 2007 5291 5297 (Pubitemid 47532190)
23. S.C. Rizzi, D.J. Heath, A.G.A. Coombes, N. Bock, M. Textor, and S. Downes Biodegradable polymer/hydroxyapatite composites: surface analysis and initial attachment of human osteoblasts J. Biomed. Mater. Res. 55 2001 475 486 (Pubitemid 32336277)
24. N. Moussaif, C. Crespo, J.G. Meier, and M.A. Jimenez Synergistic reinforcement of nanoclay and mesoporous silicate fillers in polycaprolactone: the effect of nanoclay on the compatibility of the components Polymer 53 2012 3741 3748
25. V. Cannillo, F. Chiellini, P. Fabbri, and A. Sola Production of Bioglass® 45S5 - polycaprolactone composite scaffolds via salt-leaching Compos. Struct. 92 2010 1823 1832
26. S. Deb, R. Mandegaran, and L. Di Silvio A porous scaffold for bone tissue engineering/45S5 Bioglass® derived porous scaffolds for co-culturing osteoblasts and endothelial cells J. Mater. Sci. Mater. Med. 21 2010 893 905
27. L. Calandrelli, M. Annunziata, F. Della Ragione, P. Laurienzo, M. Malinconico, and A. Oliva Development and performance analysis of PCL/silica nanocomposites for bone regeneration J. Mater. Sci. Mater. Med. 21 2010 2923 2936
28. D.M. Reffitt, N. Ogston, R. Jugdaohsingh, H.F.J. Cheung, B.A.J. Evans, R.P.H. Thompson, J.J. Powell, and G.N. Hampson Orthosilicic acid stimulates collagen type 1 synthesis and osteoblastic differentiation in human osteoblast-like cells in vitro Bone 32 2003 127 135 (Pubitemid 36299140)
29. J. Ródenas-Rochina, J.L. Gómez Ribelles, and M. Lebourg Comparative study of PCL-HAp and PCL-bioglass composite scaffolds for bone tissue engineering J. Mater. Sci. Mater. Med. 24 2013 1293 1308
30. H. Deplaine, M. Lebourg, P. Ripalda, A. Vidaurre, P. Sanz-Ramos, G. Mora, F. Prósper, I. Ochoa, M. Doblaré, J.L. Gómez Ribelles, I. Izal-Azcárate, and G. Gallego Ferrer Biomimetic hydroxyapatite coating on pore walls improves osteointegration of poly(l-lactic acid) scaffolds J. Biomed. Mater. Res. B Appl. Biomater. 101B 2013 173 186
31. H. Deplaine, J.L. Gómez Ribelles, and G. Gallego Ferrer Effect of the content of hydroxyapatite nanoparticles on the properties and bioactivity of poly(l-lactide) - hybrid membranes Compos. Sci. Technol. 70 2010 1805 1812
32. A. Hoppe, N.S. Güldal, and A.R. Boccaccini A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics Biomaterials 32 2011 2757 2774
33. J. Korventausta, M. Jokinen, A. Rosling, T. Peltola, and A. Yli-Urpo Calcium phosphate formation and ion dissolution rates in silica gel-PDLLA composites Biomaterials 24 2003 5173 5182 (Pubitemid 37272281)
34. D. Wang, and G.P. Bierwagen Sol-gel coatings on metals for corrosion protection Prog. Org. Coat. 64 2009 327 338
35. P. Fabbri, B. Singh, Y. Leterrier, J.A.E. Manson, M. Messori, and F. Pilati Cohesive and adhesive properties of polycaprolactone/silica hybrid coatings on poly(methyl methacrylate) substrates Surf. Coat. Technol. 200 2006 6706 6712 (Pubitemid 43884254)
36. J.L. Gurav, I. Jung, H. Park, E.S. Kang, and D.Y. Nadargi Silica aerogel: synthesis and applications. Review article J. Nanomater. 2010 10.1155/2010/409310 Article ID 409310, 11 pages
37. L. Hench, and J. West The sol-gel process Chem. Rev. 90 1990 33 72
38. M. Catauro, M.G. Raucci, F. de Gaetano, A. Buri, A. Marotta, and L. Ambrosio Sol-gel synthesis, structure and bioactivity of polycaprolactone/ CaO·SiO2 hybrid material J. Mater. Sci. Mater. Med. 15 2004 991 995 (Pubitemid 39318716)
39. S. Rhee, J. Choi, and H. Kim Preparation of a bioactive and degradable poly(ε-caprolactone)/silica hybrid through a sol-gel method Biomaterials 23 2002 4915 4921 (Pubitemid 35286714)
40. T. Kokubo, and H. Takadama How useful is SBF in predicting in vivo bone bioactivity? Biomaterials 27 2006 2907 2915 (Pubitemid 43208916)
41. H. Lu, B. Wang, J. Ma, G. Huang, and H. Viswanathan Measurement of creep compliance of solid polymers by nanoindentation Mech. Time-Depend. Mater. 7 2003 189 207
42. A.F. Mak, W.M. Lai, and V.C. Mow Biphasic indentation of articular cartilage I. Theoretical analysis J. Biomech. 20 1987 703 714 (Pubitemid 17654722)
43. W.C. Hayes, L.M. Keer, G. Herrmann, and L.F. Mockros A mathematical analysis for indentation test of articular cartilage J. Biomech. 5 1972 541 551
44. E.H. Lee, and J.R.M. Radok The contact problem for viscoelastic bodies J. Appl. Mech. 27 1960 438 444
45. W. Stöber, A. Fink, and E. Bohn Controlled growth of monodisperse silica spheres in the micron size range J. Colloid Interface Sci. 26 1968 62 69
46. L. Borum, and O.C. Wilson Jr. Surface modification of hydroxyapatite. Part II. Silica Biomaterials 24 2003 3681 3688 (Pubitemid 36773604)
47. A. Vallés Lluch, G. Gallego Ferrer, and M. Monleón Pradas Effect of the silica content on the physico-chemical and relaxation properties of hybrid polymer/silica nanocomposites of P(EMA-co-HEA) Eur. Polym. J. 46 2010 910 917
48. A. Vallés Lluch, J.C. Rodríguez-Hernández, G. Gallego Ferrer, and M. Monleón Pradas Synthesis and characterization of poly(EMA-co-HEA)/SiO2 nanohybrids Eur. Polym. J. 46 2010 1446 1455
49. B. Demirdögen, C.E. Plazas Bonilla, S. Trujillo, J.E. Perilla, A.E. Elcin, Y.M. Elcin, and J.L. Gómez Ribelles Silica coating of the pore walls of a microporous polycaprolactone membrane to be used in bone tissue engineering J. Biomed. Mater. Res. oct 16 2013 10.1002/jbma.34999 (Accepted manuscript online:)