Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects

Journal of Nuclear Materials

Volumn 448, Issue 1-3, 2014, Pages 448-476

  Katoh, Yutai ^a   Ozawa, Kazumi ^a,d   Shih, Chunghao ^a   Nozawa, Takashi ^a   Shinavski, Robert J ^b   Hasegawa, Akira ^c   Snead, Lance L ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

^b Hyper Therm High Temperature Composites Inc   (United States)

^c TOHOKU UNIVERSITY   (Japan)

^d JAPAN ATOMIC ENERGY AGENCY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

FIBERS; NEUTRON IRRADIATION; VAPORS;

FIBER-REINFORCED; HIGH RADIATION ENVIRONMENT; IRRADIATION EFFECT; NUCLEAR APPLICATION; NUCLEAR ENVIRONMENTS; SIC MATRIX COMPOSITES; SIC/SIC COMPOSITES; SILICON CARBIDES (SIC);

SILICON CARBIDE;

EID: 84899659191     PISSN: 00223115     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jnucmat.2013.06.040     Document Type: Article

References (159)

1. L.L. Snead, T. Nozawa, M. Ferraris, Y. Katoh, R. Shinavski, and M. Sawan J. Nucl. Mater. 417 2011 330 339
2. L. Giancarli, H. Golfier, S. Nishio, A.R. Raffray, C.P.C. Wong, and R. Yamada Fusion Eng. Des. 61-62 2002 307 318
3. Y. Katoh, L.L. Snead, I. Szlufarska, and W.J. Weber Curr. Opin. Solid State Mater. Sci. 16 2012 143 152
4. L.L. Snead, Y. Katoh, and T. Nozawa R.J.M. Konings, Comprehensive Nuclear Materials 2012 Elsevier Amsterdam 215 240
5. R. Naslain Compos. Sci. Technol. 64 2004 155 170
6. K. Yueh, D. Carpenter, and H. Feinroth Nucl. Eng. Int. 2010 14 16
7. K.E. Barrett, M.P. Teague, I. van Rooyen, S. Bragg-Sitton, K. Ellis, C. Glass, G. Roth, K. McHugh, J. Garnier, G. Griffith, M.C. Teague, G. Bell, L.L. Snead, and Y. Katoh Trans. Am. Nucl. Soc. 2012
8. S. Fazluddin, K. Smit, J. Slabber, The use of advanced materials in VHTR's, in: 2nd International Topical Meeting on High Temperature Reactor Technology, Beijing, 2004, p. E06.
9. L.L. Snead, Y. Katoh, W. Windes, and K. Smit Trans. Am. Nucl. Soc. 98 2008 1019 1020
10. C.W. Forsberg, P.F. Peterson, and R.A. Kochendarfer ICAPP 2008 2008 733 749
11. A. Kohyama, T. Hinoki, T. Mizuno, T. Kunugi, M. Sato, Y. Katoh, J.S. Park, R&D of advanced material systems for reactor core component of gas coolded fast reactor, in: Proceedings of 2005 International Congress on Advances in Nuclear Power Plants (ICAPP-05), 2005.
12. L. Charpentier, K. Dawi, M. Balat-Pichelin, E. Beche, and F. Audubert Corros. Sci. 59 2012 127 135
13. A.R. Raffray, R. Jones, G. Aiello, M. Billone, L. Giancarli, H. Golfier, A. Hasegawa, Y. Katoh, A. Kohyama, S. Nishio, B. Riccardi, and M.S. Tillack Fusion Eng. Des. 55 2001 55 95
14. N.B. Morley, Y. Katoh, S. Malang, B.A. Pint, A.R. Raffray, S. Sharafat, S. Smolentsev, and G.E. Youngblood Fusion Eng. Des. 83 2008 920 927
15. R.J. Price J. Nucl. Mater. 33 1969 17 22
16. R.J. Price Nucl. Technol. 35 1977 320 336
17. L.L. Snead, T. Nozawa, Y. Katoh, T.S. Byun, S. Kondo, and D.A. Petti J. Nucl. Mater. 371 2007 329 377
18. Y. Pramono, M. Imai, and T. Yano J. Nucl. Sci. Technol. 40 2003 531 536
19. T.D. Burchell T.D. Burchell, Carbon Materials for Advanced Technologies 1999 Elsevier Science Ltd. Oxford 429 484
20. B.T. Kelly J. Vac. Sci. Technol., A 4 1986 1171 1178
21. B.T. Kelly Fusion Technol. 16 1989 96 103
22. Y.S. Virgil'ev, and I.G. Lebedev Inorg. Mater. 38 2002 668 673
23. S. Yajima, and J. Hayashi Nature 261 1976 683 685
24. H. Ichikawa J. Ceram. Soc. Jpn. 114 2006 455 460
25. L.L. Snead, M.C. Osborne, and K.L. More J. Mater. Res. 10 1995 736 747
26. L.L. Snead, and E. Lara-Curzio Mater. Res. Soc. Symp. Proc. 540 1999 273 278
27. G.W. Hollenberg, C.H. Henager Jr., G.E. Youngblood, D.J. Trimble, S.A. Simonson, G.A. Newsome, and E. Lewis J. Nucl. Mater. 219 1995 70 86
28. A.R. Bunsell, and A. Piant J. Mater. Sci. 41 2006 823 839
29. M. Takeda, A. Saeki, J. Sakamoto, Y. Imai, and H. Ichikawa J. Am. Ceram. Soc. 83 2000 1063 1069
30. T. Tanaka, S. Shibayama, M. Takeda, and A. Yokoyama Ceram. Eng. Sci. Proc. 24 2003 217 223
31. T. Ishikawa, Y. Kohtoku, K. Kumagawa, T. Yamamura, and T. Nagasawa Nature 391 1998 773 775
32. H.M. Yun, and J.A. DiCarlo R.H. Jones, A. Kohyama, The Third International Energy Agency Workshop on SiC/SiC Ceramic Composites for Fusion Structural Applications 1999 Cocoa Beach Florida 37 52
33. A. Kohyama, J.S. Park, and H.C. Jung J. Nucl. Mater. 417 2011 340 343
34. J.B. Davis, R.S. Hay, D.B. Marshall, P.E.D. Morgan, and A. Sayir J. Am. Ceram. Soc. 86 2003 305 316
35. C. Sauder, A. Brusson, and J. Lamon Int. J. Appl. Ceram. Technol. 7 2010 291 303
36. L.L. Snead, Y. Katoh, A. Kohyama, J.L. Bailey, N.L. Vaughn, and R.A. Lowden J. Nucl. Mater. 283 2000 551 555
37. Y. Katoh, A. Kohyama, L.L. Snead, T. Hinoki, A. Hasegawa, Neutron tolerance of advanced SiC-fiber/CVI-SiC composites, in: 19th IAEA Fusion Energy Conference, 2002, pp. FT/P1-03.
38. T. Hinoki, L.L. Snead, Y. Katoh, A. Hasegawa, T. Nozawa, and A. Kohyama J. Nucl. Mater. 307 2002 1157 1162
39. C. Droillard, and J. Lamon J. Am. Ceram. Soc. 79 1996 849 858
40. R. Naslain, R. Pailler, and J. Lamon Int. J. Appl. Ceram. Technol. 7 2010 263 275
41. Y. Katoh, S. Kondo, and L.L. Snead J. Nucl. Mater. 386 2009 639 642
42. L.L. Snead, T.D. Burchell, and Y. Katoh J. Nucl. Mater. 381 2008 55 61
43. Y. Katoh, T. Nozawa, L.L. Snead, K. Ozawa, and H. Tanigawa J. Nucl. Mater. 417 2011 400 405
44. W. Yang, H. Araki, T. Noda, J.Y. Park, Y. Katoh, T. Hinoki, J.N. Yu, and A. Kohyama Mater. Trans. 43 2002 2568 2573
45. W. Yang, A. Kohyama, Y.T. Katoh, H. Araki, J.N. Yu, and T. Noda J. Am. Ceram. Soc. 86 2003 851 856
46. Y. Katoh, L.L. Snead, T. Nozawa, T. Hinoki, A. Kohyama, N. Igawa, and T. Taguchi Mater. Trans. 46 2005 527 535
47. Y. Katoh, T. Nozawa, and L.L. Snead J. Am. Ceram. Soc. 88 2005 3088 3095
48. R.A. Lowden Characterization and Control of the Fiber-Matrix Interface in Ceramic Matrix Composites, ORNL/TM-11039 1989 Oak Ridge National Laboratory Oak Ridge
49. T. Nozawa, Y. Katoh, and L.L. Snead J. Nucl. Mater. 367 2007 685 691
50. T.M. Besmann, B.W. Sheldon, R.A. Lowden, and D.P. Stinton Science 253 1991 1104 1109
51. T.M. Besmann, J.C. McLaughlin, and H. Lin J. Nucl. Mater. 219 1995 31 35
52. T. Noda, A. Kohyama, and Y. Katoh Phys. Scr. T91 2001 124 129
53. T. Noda, H. Araki, H. Suzuki, and F. Abe Mater. Trans., JIM 34 1993 1122 1129
54. A. Kohyama, Present status of NITE-SiC/SiC for advanced nuclear energy systems, in: 31st International Conference on Advanced Ceramics and Composites, Daytona Beach, 2007.
55. T. Hinoki, and A. Kohyama Ann. Chim. (Sci. Mater.) 30 2005 659 671
56. Y. Katoh, S.M. Dong, and A. Kohyama Fusion Eng. Des. 61-2 2002 723 731
57. S.M. Dong, Y. Katoh, and A. Kohyama J. Eur. Ceram. Soc. 23 2003 1223 1231
58. T. Koyanagi, T. Hinoki, K. Ozawa, and Y. Katoh J. Nucl. Mater. 2013 (submitted for publication)
59. R.B. Matthews J. Nucl. Mater. 51 1974 203 208
60. A.M. Carey, F.J. Pineau, C.W. Lee, and J.C. Corelli J. Nucl. Mater. 103&104 1981 789 794
61. S. Suyama, Y. Itoh, A. Kohyama, and Y. Katoh J. Ceram. Soc. Jpn. 109 2001 315 321
62. Y. Katoh, M. Kotani, H. Kishimoto, W. Yang, and A. Kohyama J. Nucl. Mater. 289 2001 42 47
63. T. Nozawa, T. Hinoki, Y. Katoh, and A. Kohyama J. Nucl. Mater. 307 2002 1173 1177
64. S. Bertrand, R. Pailler, and J. Lamon J. Am. Ceram. Soc. 84 2001 787 794
65. J.Y. Yan, C.W. Chen, P.C. Fang, K.M. Yin, F.R. Chen, Y. Katoh, A. Kohyama, and J.J. Kai J. Nucl. Mater. 329 2004 513 517
66. C.S. Kim Oxidation Beahvior of SiC/SiC Composites in Chemically Controlled Gas Envrionment 2010 Seminar at Oak Ridge National Laboratory Oak Ridge
67. G.A. Newsome, L.L. Snead, T. Hinoki, Y. Katoh, and D. Peters J. Nucl. Mater. 371 2007 76 89
68. Y. Katoh, K. Ozawa, T. Hinoki, Y.B. Choi, L.L. Snead, and A. Hasegawa J. Nucl. Mater. 417 2011 416 420
69. T. Nozawa, Y. Katoh, L.L. Snead, T. Hinoki, and A. Kohyama Ceram. Eng. Sci. Proc. 26 2005 311 318
70. T. Nozawa, E. Lara-Curzio, Y. Katoh, and R.J. Shinavski E. Lara-Curzio, Mechanical Properties and Performance of Engineering Ceramics and Composites III 2007 Wiley 223 234
71. T. Nozawa, K. Ozawa, Y.B. Choi, A. Kohyama, and H. Tanigawa Fusion Eng. Des. 87 2012 803 807
72. Y. Katoh, T. Nozawa, L.L. Snead, T. Hinoki, and A. Kohyama Fusion Eng. Des. 81 2006 937 944
73. Y. Katoh, L.L. Snead, T. Nozawa, S. Kondo, and J.T. Busby J. Nucl. Mater. 403 2010 48 61
74. G.N. Morscher, and V.V. Pujar Int. J. Appl. Ceram. Technol. 6 2009 151 163
75. D.B. Marshall J. Am. Ceram. Soc. 67 1984 C259 C260
76. A.G. Evans, J.-M. Domergue, and E. Vagaggini J. Am. Ceram. Soc. 77 1994 1425 1435
77. J. Lamon, F. Rebillat, and A.G. Evans J. Am. Ceram. Soc. 78 1995 401 405
78. J.W. Hutchinson, and H.M. Jensen Mech. Mater. 9 1990 139 163
79. T. Nozawa, K. Ozawa, S. Kondo, T. Hinoki, Y. Katoh, L.L. Snead, and A. Kohyama J. ASTM Int. 2 2005 12884-12881-12813
80. E. Lara-Curzio, D. Bowers, and M.K. Ferber J. Nucl. Mater. 230 1996 226 232
81. E. Lara-Curzio, M.K. Ferber, Shear strength of continuous fiber ceramic composites, in: Thermal and Mechanical Test Methods and Behavior of Continuous Fiber Ceramic Composites, ASTM STP 1309, ASTM International, West Conshohocken, PA, 1997, pp. 31-48. (Pubitemid 127613898)
82. T. Hinoki, Y. Maki, A. Kohyama, E. Lara-Curzio, and L.L. Snead Ceram. Eng. Sci. Proc. 25 2004 65 70
83. Y.B. Choi, T. Hinoki, K. Ozawa, Y. Katoh, K. Matsugi, and T. Kelimu Mater. Trans. 53 2012 2060 2063
84. T. Nozawa, H. Tanigawa, J.S. Park, and A. Kohyama Ceram. Eng. Sci. Proc. 30 2009
85. L.L. Snead, A.M. Williams, and A.L. Qualls M.L. Grossbeck, T.D. Allen, R.G. Lot, A.S. Kumar, The Effects of Radiation on Materials: 21st International Symposium, ASTM STP 1447 2003 ASTM International West Conshohocken, PA
86. E. Lara-Curzio Compr. Compos. Mater. 4 2000 533 577
87. K. Ozawa, T. Nozawa, Y. Katoh, T. Hinoki, and A. Kohyama J. Nucl. Mater. 367 2007 713 718
88. M. Sawan, Y. Katoh, and L.L. Snead J. Nucl. Mater. 2013 10.1016/j.bbr.2011.03.031 (in press)
89. K. Ozawa, Y. Katoh, L.L. Snead, T. Nozawa, T. Hinoki, A. Hasegawa, The effects of neutron irradiation on dimensional change in advanced siicon carbide composites, DOE/ER-0313/46 Fusion Reactor Materials Semiannual Progress Report for Period Ending June 30, 2009, pp. 4-15.
90. R. Blackstone, and E.H. Voice J. Nucl. Mater. 39 1971 319 322
91. R.J. Price J. Nucl. Mater. 48 1973 47 57
92. L.L. Snead, M.C. Osborne, R.A. Lowden, J. Strizak, R. Shinavski, K.L. More, W.S. Eatherly, J.L. Bailey, and A.M. Williams J. Nucl. Mater. 253 1998 20 30
93. L.L. Snead, Y. Katoh, and S. Connery J. Nucl. Mater. 367 2007 677 684
94. J.B.J. Hegeman, J.G. van der Laan, M. van Kranenburg, M. Jong, D.S. d'Hulst, and P. ten Pierick Fusion Eng. Des. 75-59 2005 789 793
95. Y. Katoh, Final Report on Irradiation of Bonded-fiber SiC Composite, ORNL/TM-2012/201, Oak Ridge National Laboratory, Oak Ridge, 2010.
96. Y. Katoh, L.L. Snead, and S.I. Golubov E. Lara-Curzio, Mechanical Properties and Performance of Engineering Ceramics and Composites III 2007 Wiley 297 306
97. Y. Katoh, A. Clerk, K. Ozawa, Dilatometry of irradiated silicon carbide as a method for determination of irradiation temperature, Fusion Reactor Materials, DOE/ER-0313/48, vol. 48, 2010, pp. 158-163.
98. T. Ishikawa, K. Bansaku, N. Watanabe, Y. Nomura, M. Shibuya, and T. Hirokawa Compos. Sci. Technol. 58 1998 51 63
99. G.E. Youngblood, R.H. Jones, A new type of SiC composite for fusion, Fusion Materials, Oak Ridge National Laboratory, 2000, pp. 112-120.
100. Y. Katoh, T. Nozawa, A.M. Williams, T. Cheng, P. Dou, L.L. Snead, Properties of Hi-Nicalon Type-S CVI SiC Composite Irradiated to 70 dpa at Elevated Temperatures, ORNL/TM-2012/459, Oak Ridge National Laboratory, 2012.
101. L.L. Snead, S.J. Zinkle, and D.P. White J. Nucl. Mater. 340 2005 187 202
102. R.J. Price J. Nucl. Mater. 46 1973 268 272
103. D.J. Senor, G.E. Youngblood, L.R. Greenwood, D.V. Archer, D.L. Alexander, M.C. Chen, and G.A. Newsome J. Nucl. Mater. 317 2003 145 159
104. L.L. Snead, in: A. Kohyama, R.H. Jones, B. Riccardi (Eds.), The Sixth IEA International Workshop on SiC/SiC Ceramic Composites for Fusion Applications, Boston, 2004, pp. 197-208.
105. A. Pacault, A. Marchand, J. Amiell, E. Dupart, J. Rappeneau, C. Micaud, and R. Wlodarsky Carbon 10 1971 355
106. G.E. Youngblood, R.J. Kurtz, R.H. Jones, SiC/SiC design for a flow channel insert, in: Fusion Materials, Oak Ridge National Laboratory, 2005, pp. 3-8.
107. G.N. Morscher Compos. Sci. Technol. 66 2006 2804 2814
108. Z. Hashin J. Appl. Mech. 46 1979 543 550
109. T.W. Chou Microstructural Design of Fiber Composites 1992 Cambridge University Press New York
110. M. Sakata, and H. Ohnabe M.G. Jenkins, S.T. Gonczy, E. Lara-Curzio, N.E. Ashbaugh, L.P. Zawada, Thermal and Mechanical Test Methods and Behavior of Continuous-Fiber Ceramic Composites, ASTM STP 1309 1997 American Society for Testing and Materials West Conshohocken, PA
111. E. Vagaggini, J.-M. Domergue, and A.G. Evans J. Am. Ceram. Soc. 78 1995 2709 2720
112. J.-M. Domergue, E. Vagaggini, and A.G. Evans J. Am. Ceram. Soc. 78 1995 2721 2731
113. T. Hinoki, E. Lara-Curzio, and L.L. Snead Fusion Sci. Technol. 44 2003 211 218
114. J.M. Hodgkinson Mechanical Testing of Advanced Fibre Composites 2000 Woodhead Publishing Limited Cambridge
115. S.W. Tsai, and E.M. Wu J. Compos. Mater. 5 1970 58 80
116. T. Nozawa, Y. Katoh, and A. Kohyama Mater. Trans. 46 2005 543 551
117. T. Nozawa, T. Hinoki, Y. Katoh, A. Kohyama, and E. Lara-Curzio M.A. Sokolov, J.D. Landes, G.E. Lucas, Small Specimen Test Techniques: Fourth Volume, ASTM STP 1418 2002 ASTM International West Conshohocken, PA 294 305
118. T. Nozawa, Y. Katoh, A. Kohyama, and E. Lara-Curzio J.P. Singh, N.P. Bansal, M. Singh, Advances in Ceramic Matrix Composites VIII: Ceramic Transactions vol. 139 2002 The American Ceramic Society Westerville, OH 127 138
119. Y. Katoh, T. Nozawa, L.L. Snead, and T. Hinoki J. Nucl. Mater. 367 2007 774 779
120. W.A. Curtin J. Am. Ceram. Soc. 74 1991 2837 2845
121. Y. Katoh, and L.L. Snead J. ASTM Int. 2 2005 12377-12371-12313
122. S.T. Gonczy, and M.G. Jenkins M.G. Jenkins, E. Lara-Curzio, S.T. Gonczy, Mechanical, Thermal and Environmental Testing and Performance of Ceramic Composites and Components, ASTM STP 1392 2000 American Society for Testing and Materials West Conshohocken, PA
123. E. Lara-Curzio, and M.K. Ferber J. Mater. Sci. 29 1994 6152 6158
124. P. Lawrence J. Mater. Sci. 7 1972 1 6
125. R.J. Kerans, and T.A. Parthasarathy J. Am. Ceram. Soc. 74 1991 1585 1596
126. C.-H. Hsueh Mater. Sci. Eng., A 154 1992 125 132
127. C.-H. Hsueh Mater. Sci. Eng., A 165 1993 189 195
128. C. Liang, and J.W. Hutchinson Mech. Mater. 14 1993 207 221
129. D.K. Shetty J. Am. Ceram. Soc. C107-109 1988
130. T. Nozawa, L.L. Snead, Y. Katoh, and J.H. Miller J. Nucl. Mater. 371 2007 304 313
131. T. Nozawa, Y. Katoh, and L.L. Snead J. Nucl. Mater. 384 2009 195 211
132. C. Sauder, A. Brusson, and J. Lamon Int. J. Appl. Ceram. Technol. 7 2010 291 303
133. K. Ozawa, Y. Katoh, E. Lara-Curzio, L.L. Snead, and T. Nozawa Ceram. Eng. Sci. Proc. 31 2010 207 220
134. E. Lara-Curzio Comprehensive Composites Encyclopedia 2000 Elsevier
135. S.R. Choi, and N.P. Bansal Ceram. Trans. 175 2006 119 134
136. T. Nozawa, Y. Choi, T. Hinoki, H. Kishimoto, A. Kohyama, and H. Tanigawa IOP Conf. Ser.: Mater. Sci. Eng. 18 2011 162011
137. C. Shih, Y. Katoh, K. Ozawa, E. Lara-Curzio, and L.L. Snead Int. J. Appl. Ceram. Technol. 2013 (submitted for publication)
138. V. Kostopoulos, and Y.Z. Pappas Compr. Compos. Mater. 4 2000 95 114
139. T. Nozawa, and H. Tanigawa Int. J. Appl. Ceram. Technol. 7 2010 304 315
140. V. Kostopoulos, Y.P. Markopoulos, Y.Z. Pappas, and S.D. Peteves J. Eur. Ceram. Soc. 18 1998 69
141. M. Sakai, K. Urashima, and M. Inagaki J. Am. Ceram. Soc. 66 1983 868
142. K. Ozawa, Y. Katoh, T. Nozawa, and L.L. Snead J. Nucl. Mater. 417 2011 411 415
143. K. Ozawa, Y. Katoh, T. Nozawa, T. Hinoki, and L.L. Snead IOP Conf. Ser.: Mater. Sci. Eng. 18 2011 162005
144. H.M. Yun, J.A. DiCarlo, Thermomechanical Characterization and Implications for CMC, NASA TM-1999-0209283, 1999.
145. J.A. DiCarlo, and H.M. Yun N.P. Bansal, Handbook of Ceramic Composites 2005 Kluwer Academic Publishers Boston
146. A.R. Bunsell, and J. Renard Fundamentals of Fibre Reinforced Composite Materials 2005 Institute of Physics London
147. C. Sauder, and J. Lamon J. Am. Ceram. Soc. 90 2007 1146 1156
148. H.M. Yun, and J.A. DiCarlo Ceram. Eng. Sci. Proc. 20 1999 259 272
149. C.H. Carter Jr., R.F. Davis, and J. Bentley J. Am. Ceram. Soc. 67 1984 732 740
150. Y. Katoh, L.L. Snead, T.D. Burchell, W.E. Windes, Composite materials for high temperature reactors: technology development roadmap, in: 5th International Conference on High Temperature Reactor Technology, Prague, 2010.
151. ASME Boiler Code Section NH, Class 1 Components in Elevated Temperature Service, American Society for Mechanical Engineers, New York, 2007.
152. R.M. McMeeking S. Nair, K. Jakus, High Temperature Mechanical Behaviour of Ceramic Composites 1995 Butterworth-Heinemann Burlington
153. B. Schneider, A. Guette, R. Naslain, M. Cataldi, and A. Costecalde J. Mater. Sci. 33 1998 535 547
154. E.A. Gulbransen, K.F. Andrew, and F.A. Brassart J. Electrochem. Soc. 113 1966 1311 1314
155. R.H. Jones, C.H. Henager Jr., C.A. Lewinsohn, and C.F. Windisch J. Am. Ceram. Soc. 83 2000 1999 2005
156. W. Gauthier, and J. Lamon J. Am. Ceram. Soc. 92 2009 702 709
157. W. Gauthier, F. Pailler, J. Lamon, and R. Pailler J. Am. Ceram. Soc. 92 2009 2067 2073
158. J.K. Wright, W.R. Lloyd, Analysis of Potential Materials for the Control Rod Sleeves of the Next Generation Nuclear Plant, INL/EXT-06-11614, 2006.
159. Y. Katoh, L.L. Snead, C.M. Parish, and T. Hinoki J. Nucl. Mater. 434 2013 141 151