Delayed failure of hi-nicalon and hi-nicalon s multifilament tows and single filaments at intermediate temperatures (500°-800°C)

Journal of the American Ceramic Society

Volumn 92, Issue 3, 2009, Pages 702-709

  Gauthier, W ^a   Lamon, J ^a  

^a UNIVERSITÉ DE BORDEAUX   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CRACKING (CHEMICAL); CRACKS; SILICON CARBIDE;

APPLIED STRESS; CONSTANT LOADS; CONVENTIONAL POWER; DELAYED FAILURES; EXPERIMENTAL DATUM; FIBER TOWS; INTERMEDIATE TEMPERATURES; MODEL-BASED; MULTI FILAMENTS; POWER LAWS; SINGLE FILAMENTS; SLOW CRACK GROWTHS; STATIC FATIGUES; STRESS RUPTURES;

FILAMENTS (LAMP);

EID: 62549124109     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2009.02924.x     Document Type: Article

References (30)

1. J. Lamon A Micromechanics-Based Approach to the Mechanical Behaviour of Brittle-Matrix Composites Comp. Sci. Technol., 61, 2259 72 (2001).
2. V. Calard J. Lamon Failure of Fiber Bundles Comp. Sci. Technol., 64, 701 10 (2004).
3. N. Lissart J. Lamon Damage and Failure in Ceramic-Matrix Minicomposites: Experimental Study and Model Acta Mater., 45 [3] 226 30 (1997).
4. Ph. Forio, F. Lavaire J. Lamon Delayed Failure at Intermediate Temperatures (600°-700°C) in Air in Silicon Carbide Multifilament Tows J. Am. Ceram. Soc., 87 [5] 888 93 (2004).
5. M. Berger, N. Hochet A. R. Bunsell Small Diameter SiC-Based Fibers pp. 231 89 in Fine Ceramic Fibers, Edited by A. R. Bunsell M. H. Berger. Marcel Dekker, New York, 1999.
6. 3-Based Fibers pp. 17 26 in Ceramic Transactions, 74, Advances in Ceramic-matrix Composites II, Edited by N. P. Bansal J. P. Singh. American Ceramic Society, Westerville, OH, 1996.
7. J. Hurst, H. M. Yun D. Gorican A Comparison of the Mechanical Properties of Three Polymer-Derived Small Diameter SiC Fibres pp. 3 15 in Ceramic Transactions 74, Advances in Ceramic-Matrix Composites III, Edited by N. P. Bansal J. P. Singh. American Ceramic Society, Westerville, OH, 1996.
8. R. Bodet, X. Bourrat, J. Lamon R. Naslain Tensile Creep Behaviour of a Silicon Carbide Fiber with a Low Oxygen Content J. Mater. Sci., 30, 661 77 (1995).
9. A. R. Bunsell A. Piant A Review of the Development of Three Generations of Small Diameter Silicon Carbide Fibers J. Mater. Sci., 41, 823 39 (2006).
10. T. Shimoo, K. Okamura W. Mutoh Oxidation Behavior and Mechanical Properties of Low-Oxygen SiC Fibers Prepared by Vacuum Heat-Treatment of Electron-Beam-Cured Poly(Carbosilane) Precursor J. Mater. Sci., 38, 1653 60 (2003).
11. J. J. Sha, J. S. Park, T. Hinoki A. Kohyama Tensile Properties and Microstructure Characterization of Hi-Nicalon SiC Fibers after Loading at High Temperature Int. J. Fract., 142, 1 8 (2006).
12. Y. Gogoti M. Yoshima Oxidation and Properties Degradation of SiC Fibers below 850°C J. Mater. Sci. Lett., 13, 680 3 (1994).
13. E. Lara-Curzio Stress-Rupture of Nicalon/SiC Continuous Fiber Ceramic Composites in Air at 950°C J. Am. Ceram. Soc., 80 [12] 3268 72 (1997).
14. E. Lara-Curzio Oxidation Induced Stress-Rupture of Fiber Bundles J. Eng. Mater. Tech., 120, 105 9 (1998).
15. H. M. Yun J. A. Di Carlo, Ceram. Eng. Sci. Proc., 4, 61 7 (1996).
16. W. Gauthier, J. Lamon R. Pailler Oxidation of Silicon Carbide Fibers in Air at Intermediate Temperature During Static Fatigue J. Am. Ceram. Soc., accepted.
17. European Standard, Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements - Part 5: Determination of Distribution of Tensile Strength and of Tensile Strain to Failure of Filaments Within a Multifilament Tow at Ambient Temperature, ENV 1007 5, 1998.
18. S. M. Dong, G. Chollon, C. Labrugère, M. Lahaye, A. Guette, J. L. Bruneel, M. Couzi, R. Naslain D. L. Jiang Characterization of Nearly Stoichiometric SiC Ceramic Fibres J. Mater. Sci., 36, 2371 81 (2001).
19. R. W. Davidge, J. R. McLaren G. Tappin Strength-Probability-Time (SPT) Relationships in Ceramics J. Mater. Sci., 8, 1699 705 (1973).
20. M. Hori Statistical Aspects of Fracture in Concrete; I. An Analysis of Flexural Failure of Portland Cement Mortar from the Standpoint of Stochastic Theory J. Phys. Soc. Jpn., 14, 1444 52 (1959).
21. B. D. Coleman Time Dependence of Mechanical Breakdown in Bundles of Fibers. I. Constant Total Load J. Appl. Phys., 28, 1058 67 (1957).
22. K. Fukumori T. Kuranchi Static Fatigue of Rubbery Polymers: Statistical Approach to the Failure Process J. Mater. Sci., 19, 2501 12 (1984).
23. n" (in French); Ph.D. Thesis, no. 1927, University of Bordeaux 1, 1998.
24. E. Youngblood, C. Lewinsohn, R. H. Jones A. Kohyama Tensile Strength and Fracture Surface Characterization of Hi-Nicalon SiC Fibers J. Nucl. Mater., 289, 1 9 (2001).
25. Morishita, S. Ochiai, H. Okuda, T. Ishikawa, M. Sato T. Inone Fracture Toughness of a Crystalline Silicon Carbide Fiber (Tyranno SA3) J. Am. Ceram. Soc., 89 [8] 2571 6 (2006).
26. F. Pailler "Predictions of Lifetime at High Temperatures in Air for SiC/SiBC Composites" (in French); Ph.D. Thesis, no. 2808, University Bordeaux 1, 2004.
27. I. W. Smith The Intrinsic Reactivity of Carbons with Oxygen Fuel, 57 [7] 409 14 1978).
28. A. Laforêt "Lifetime of SiC/SiC Composites at High Temperatures" (in French); LCTS internal report, RT06-0695, 2006.
29. N. Lissart J. Lamon Statistical Analysis of Failure of SiC Fibers in the Presence of Bimodal Flaw Populations J. Mater. Sci., 32, 6107 17 (1997).
30. W. Gauthier "Delayed Failure at Intermediate Temperatures (<800°C) of SiC-Based Tows and Filaments" (in French); Ph.D. Thesis, no. 3303, University Bordeaux 1, 2006.