Influence of interfacial roughness on fiber sliding in oxide composites with La-monazite interphases

Journal of the American Ceramic Society

Volumn 86, Issue 2, 2003, Pages 305-316

  Davis, Janet B ^a   Hay, Randall S ^b   Marshall, David B ^a   Morgan, Peter E D ^a   Sayir, Ali ^c  

^a ROCKWELL SCIENTIFIC COMPANY   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

^c CASE WESTERN RESERVE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC FIBERS; CRYSTAL MICROSTRUCTURE; DEBONDING; DISLOCATIONS (CRYSTALS); EUTECTICS; FRACTURE; FRICTION; INTERFACES (MATERIALS); MONAZITE; PLASTIC DEFORMATION; POLYCRYSTALLINE MATERIALS; RESIDUAL STRESSES; SCANNING ELECTRON MICROSCOPY; SURFACE ROUGHNESS; TRANSMISSION ELECTRON MICROSCOPY;

FIBER SLIDING;

CERAMIC MATRIX COMPOSITES;

EID: 0037302321     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.2003.tb00016.x     Document Type: Article

References (63)

1. P. E. D. Morgan and D. B. Marshall, "Ceramic Composites of Monazite and Alumina," J. Am. Ceram. Soc., 78, 1553-63 (1995).
2. P. E. D. Morgan, D. B. Marshall, and R. M. Housley, "High Temperature Stability of Monazite-Alumina Composites," Mater. Sci. Eng., A, A195, 215-22 (1995).
3. 4 System," J. Am. Ceram. Soc., 81 [4] 951-56 (1998).
4. D. B. Marshall, J. B. Davis, P. E. D. Morgan, and J. R. Porter, "Interface Materials for Damage-Tolerant Oxide Composites," Key Eng. Mater., 127-131, 27-36 (1997).
5. 4." J. Eur. Ceram. Soc., 19, 2421-26 (1999).
6. J. B. Davis, D. B. Marshall, and P. E. D. Morgan, "Monazite Containing Oxide-Oxide Composites," J. Eur. Ceram. Soc., 20 [5] 583-87 (2000).
7. K. A. Keller, T.-I. Mah, E. E. Boakye, and T. A. Parthasarathy, "Gel-Casting and Reaction Bonding of Oxide-Oxide Minicomposites with Monazite Interphase," Ceram. Eng. Sci. Proc., 21 [4] 525-34 (2000).
8. T. A. Parthasarathy, E. Boakeye, M. K. Cinibulk, and M. D. Perry, "Fabrication and Testing of Oxide/Oxide Microcomposites with Monazite and Hibonite as Interlayers," J. Am. Ceram. Soc., 82 [12] 3575-83 (1999).
9. S. M. Johnson, Y. Blum, C. Kanazawa, H.-J. Wu, J. R. Porter, P. E. D. Morgan, D. B. Marshall, and D. Wilson, "Processing and Properties of an Oxide/Oxide Composite," Key Eng. Mater., 127-131, 231-38 (1997).
10. S. M. Johnson, Y. Blum, and C. H. Kanazawa, "Development and Properties of an Oxide Fiber- Oxide Matrix Composite," Key. Eng. Mater., 164-165, 85-90 (1999).
11. K. A. Keller, T. Mah, T. A. Parthasarathy, E. E. Boakye, and M. Cinibulk, "Evaluation of All-Oxide Composites Based on Coated Nextel 610 and 650 Fibers," Ceram. Eng. Sci. Proc., in press (2001).
12. Y. Hikichi and T. Nomura, "Melting Temperatures of Monazite and Xenotime," J. Am. Ceram. Soc., 70 [10] C-252-C-253 (1987).
13. 4," J. Am. Ceram. Soc., 80 [7] 1677-83 (1997).
14. D.-H. Kuo and W. M. Kriven, "Characterization of Yttrium Phosphate and a Yttrium Phosphate/Yttrium Aluminate Laminate," J. Am. Ceram. Soc., 78 [11] 3121-24 (1995).
15. M. G. Cain, R. L. Cain, A. Tye, P. Rian, M. H. Lewis, and J. Gent, "Structure and Stability of Synthetic Interphases in CMCs," Key Eng. Mater., 127-131, 37-49 (1997).
16. D.-H. Kuo, W. M. Kriven, and T. J. Mackin, "Control of Interfacial Properties through Fiber Coatings: Monazite Coatings in Oxide-Oxide Composites," J. Am. Ceram. Soc., 80 [12] 2987-96 (1997).
17. R. J. Kerans and T. A. Parthasarathy, "Debond Crack Roughness, Interface Properties and Fiber Coating Design in Ceramic Composites," Key Eng. Mater., 127-131, 51-62 (1977).
18. A. Sayir, "Directional Solidification of Euteclic Ceramics"; pp. 197-211 in Computer Aided Design of High Temperature Materials. Edited by A. Pechenik, R. Kalia, and P. Vashishta. Oxford University Press, Oxford, U.K., 1999.
19. A. Sayir and S. C. Farmer, "Directionally Solidified Mullite Fibers," Mater. Res. Soc. Symp. Proc., 365, 11-21 (1995).
20. 3) Eutectic," Acta Mater., 48 [18-19] 4691-97 (2000).
21. (r)12 (YAG) Eutectic Fibers," Proc. 2nd Ann. HITEMP Rev., 83, 1-14 (1991).
22. T. A. Hahn, "Thermal Stress Relaxation due to Plastic Flow in the Fiber Coating of a Continuous Fiber Reinforced Composite," J. Compos. Mater., 27 [16] 1545-77 (1993).
23. W. M. Kriven, J. W. Palko, S. Sinogeikin, J. D. Bass, A. Sayir, G. Brunauer, H. Boysen, F. Frey, and J. Schneider, "High Temperature Single Crystal Properties of Mullite," J. Eur. Ceram. Soc., 19, 2529-41 (1999).
24. Y. S. Touloukian, R. K. Kirby, R. E. Taylor, and T. Y. R. Lee, Thermal Expansion - Non-Metallic Solids. New York, Plenum, 1977.
25. S. Geller, G. P. Espinosa, and P. B. Crandall, "Thermal Expansion of Yttrium and Gadolinium Iron, Galluim and Aluminum Garnets," J. Appl. Crystallogr., 2, 86-88 (1969).
26. R. S. Hay, J. R. Welch, and M. K. Cinibulk, "TEM Specimen Preparation and Characterization of Ceramic Coatings on Fiber Tows," Thin Solid Films, 308-309, 389-92 (1997).
27. M.-Y. He and J. W. Hutchinson, "Crack Deflection at an Interface between Dissimilar Materials," Im. J. Solids Struct., 25, 1053-67 (1989).
28. D. B. Marshall, J. B. Davis, P. E. D. Morgan, J. R. Waldrop, and J. P. Porter, "Properties of La-Monazite as an Interphase in Oxide Composites," Z. Metallkd., 90 [12] 1048-52 (1999).
29. D. B. Marshall, J. R. Waldrop, and P. E. D. Morgan, "Thermal Grooving at the Interface between Alumina and Monazite," Acta Mater., 48, 4471-74 (2000).
30. M. S. Paterson, Experimental Rock Deformation-The Brittle Field; p. 254. Springer-Verlag, Heidelberg, New York, and Berlin, 1978.
31. R. S. Hay, "Monazite and Scheelite Deformation Mechanisms," Ceram. Eng. Sci. Proc., 21 [4] 203-28 (2000).
32. M.-Y. He, A. G. Evans, and J. W. Hutchinson, "Crack Deflection at an Interface Between Dissimilar Elastic Materials: Role of Residual Stresses," Int. J. Solids Struct., 31 [24] 3443-55 (1994).
33. R. S. Hay, E. Boakeye, M. D. Petty, Y. Berta, K. Von Lehmden, and J. Welch, "Grain Growth and Tensile Strength of 3M Nextel 720™ after Thermal Exposure," Ceram. Eng. Sci. Proc., 20 [3] 165-72 (1999).
34. D. M. Wilson and L. R. Visser, "Nextel 650 Ceramic Oxide Fiber: New Alumina-based Fiber for High Temperature Composite Reinforcement," Ceram. Eng. Sci. Proc., 21 [4] 363-73 (2000).
35. A. Romoscanu, "Topography Characterization of Alumina-Mullite Fibers Using Atomic Force Microscopy and Relationship to Mechanical Properties," Masters Thesis. University of Pennsylvania, Philadelphia, PA (1998).
36. L. E. Matson and N. Hecht, "Microstructural Stability and Mechanical Properties of Directionally Solidified Alumina/YAG Eutectic Monofilaments," J. Eur. Ceram. Soc., 19, 2487-503 (1999).
37. J. B. Davis, D. B. Marshall, P. E. D. Morgan, and R. M. Housley, "Machinable Ceramics Containing Rare-Earth Phosphates," J. Am. Ceram. Soc., 81 [8] 2169-75 (1998).
38. B. J. Hockey, "Plastic Deformation of Aluminum Oxide by Indentation and Abrasion," J. Am. Ceram. Soc., 54 [5] 223-31 (1971).
39. A. H. Heuer, "Deformation Twinning in Corundum," Philos. Mag. A, 13 [122] 379-93 (1966).
40. 3"; pp 818-38 in Advances in Ceramics, Vol. 10. Edited by W. D. Kingery. Columbus, Ohio, American Ceramic Society, 1984.
41. H. M. Chan and B. R. Lawn, "Indentation Deformation and Fracture of Sapphire," J. Am. Ceram. Soc., 71 [1] 29-35 (1988).
42. 3)," J. Am. Ceram. Soc., 77 [2] 385-97 (1994).
43. S. B. Ton and R. McPherson, "Plastic Deformation during the Abrasive Wear of Ceramics"; pp. 723-32 in Deformation of Ceramic Materials, Vol. 2. Edited by R. E. Tressler and R. C. Bradt. Plenum Press. New York and London, 1984.
44. I. J. McColm, Ceramic Hardness; p. 324. Plenum Press, New York, 1990.
45. I. A. Cutter and R. McPherson, "Plastic Deformation of Alumina during Abrasion," J. Am. Ceram. Soc., 56, 266 (1973).
46. S.-J. Cho, H. Moon, B. J. Hockey, and S. M. Hsu, "The Transition from Mild to Severe Wear in Alumina during Sliding," Acta Metall. Mater., 40 [1] 185-92 (1992).
47. B. J. Inkson, "Dislocations and Twinning Activated by the Abrasion of Alumina," Acta Mater., 48, 1883-95 (2000).
48. D. Kuhlmann-Wilsdorf, "What Role for Contact Spots and Dislocations in Friction and Wear," Wear, 200, 8-29 (1996).
49. 3 Matrix Composite," Ceram. Eng. Sci. Proc., 18 [3] 757-62 (1997).
50. F. J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 1st Ed.; p. 497. Pergamon, 1996.
51. B. J. Hockey, "Observations by Transmission Electron Microscopy of the Subsurface Damage Produced in Aluminum Oxide by Mechanical Polishing and Abrasion," Proc. Br. Ceram. Soc., 20, 95-115 (1972).
52. F. P. Bowden and D. Tabor, Friction and Lubrication of Solids, Parts I and II. Clarendon Press, Oxford. U. K., 1964.
53. J. C. Jaeger, "Moving Sources of Heat and Temperature at Sliding Contacts," J. Proc. R. Soc. NSW, 76, 203 (1942).
54. M. F. Ashby, J. Abulawi, and H. S. Kong, "Temperature Maps for Frictional Heating in Dry Sliding," Tribol. Trans., 34 [4] 577-87 (1991).
55. S. Brown, "Frictional Heating on Faults: Stable Sliding versus Stick-Slip," J. Geophys. Res., 103 [B4] 7413-20 (1998).
56. 2, and Monazite," Radiat. Eff. Lett. Sect., 58, 1-3 (1981).
57. T. C. Ehlert, K. A. Gowda, F. G. Karioris, and L. Cartz, "Differential Scanning Calorimetry of Heavy Ion Bombarded Synthetic Monazile," Radiat. Eff., 70, 173-81 (1983).
58. L. A. Boatner and B. C. Sales, "Monazite"; Ch. 8 in Radioactive Waste Forms for the Future. Edited by W. Lutze and R. C. Ewing. North-Holland, New York, 1988.
59. 4, and Zircon," J. Mater. Res., 12 [7] 1816-27(1997).
60. A. Meldrum, L. A. Boatner, and R. C. Ewing, "A Comparison of Radiation Effects in Crystalline ABO4-type Phosphates and Silicates," Mineral. Mag., 64 [2] 185-94 (2000).
61. 4," J. Am. Ceram. Soc., 73 [12] 3594-96 (1990).
62. F. P. Incropera and D. P. DeWitt, Introduction to Heat Transfer. New York, Wiley, 1996.
63. Y. S. Touloukian, R. W. Powell, C. Y. Ho, and P. G. Klemens, Thermal Conductivity - Non-Metallic Solids. Plenum New York, 1970.