A method for creating actuated joints via fiber embedding in a polyjet 3D printing process

22nd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2011

Volumn , Issue , 2011, Pages 583-592

  Justin Stiltner, L ^a   Elliott, Amelia M ^a   Williams, Christopher B ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

3D printing; Actuated joints; Fiber embedding

Indexed keywords

3D PRINTERS; MANUFACTURE; PRINTING PRESSES; THREE DIMENSIONAL;

3-D PRINTING; 3D PRINTING PROCESS; ACTUATED JOINT; DIRECT FABRICATIONS; EMBEDDING METHOD; FIBER EMBEDDING; FLEXIBLE JOINTS; PHOTOPOLYMER MATERIAL;

PRINTING;

EID: 84898462532     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (42)

1. Alam, M., C. Mavroidis, N. Langrana, and P. Bidaud, 1999, "Mechanism Design using Rapid Prototyping, " Proceedings of the 10th World Congress on the Theory of Machines and Mechanisms, Oulu, Finland, 3, pp. 930-938.
2. Bailey, S. A., J. G. Cham, and M.R. Cutkosky, "Comparing the Locomotion Dynamics of a Cockroach and a Shape Deposition Manufacturing Biomimetic Hexapod, " Department of Integrative Biology, University of California at Berkley.
3. Bailey, S. A., J. G. Cham, M. R. Cutkosky, and R.J. Full, 2000, "Biomimetic Robotic Mechanisms via shape Deposition Manufacturing, " Robotics Research: The Ninth International Symposium, John Hollerbach and Dan Koditschek (Eds), Springer-Verlag, London.
4. Bailey, S. and J. Clark, "Sprawlita. " 25 January 2000. Standford University Biomemetics. .
5. Beck, J.E., F. B. Prinz, D. P. Siewiorek and L.E. Weiss, 1992, "Manufacturing Mechatronics Using Thermal Spray Shape Deposition, " Solid Freeform Fabrication Symposium, pp. 272-279.
6. Calvert, P., H. Denham, and T. Anderson, 1999, "Freeform Fabrication of Composites with Embedded Sensors, " Proceedings of SPIE-The International Society for Optical Engineering, Vol. 3670, pp. 128-133.
7. Cham, J. G., B. L. Pruitt, M. R. Cutkosky, M. Binnard, L. E. Weiss and G. Neplotnik, 1999, "Layered Manufacturing with Embedded Components: Process Planning Considerations, " Proceedings of 1999 ASME Design Engineering Technical Conference, September 12-15.
8. Cham, J. G., S. A. Bailey, J. E. Clark, R. J. Full and M. R. Cutkosky, 2002, "Fast and Robust: Hexapedal Robots via Shape Deposition Manufacturing, " The International Journal of Robotics Research, 21, 10-11: 869-882.
9. Danforth, S.C. and A. Safari, "Solid Freeform Fabrication: Novel Manufacturing Opportunities for Electronic Ceramics, " IEEE International Symposium on Applications of Ferroelectrics, v.1, 1996, pp.183-188.
10. Denham, H., G. George, L. Rintoul and P. Calvert, 1996, "Fabrication of Polymers and Composites Containing Embedded Sensors, " Proceedings of SPIE -The International Society for Optical Engineering, v.2779, pp.742-747.
11. Denham, H.B., T. A. Anderson, E. Madenci and P.D. Calvert, 1997, "Embedded PVF2 Sensors for Smart Composites, " Proceedings of SPIE - The International Society for Optical Engineering, v.3040, pp.138-147.
12. Finger, S., J. Stivoric, C. Amon, L. Gursoz, F. Prinz, D. Siewiorek, A. Smailagic and L. Weiss, 1996, "Reflections on a Concurrent Design Methodology: A Case Study in Wearable Computer Design, " Computer-Aided Design, 28 (5) pp. 393-404.
13. Geving, B., 1999, "Build Around a Screwdriver Shaft, " .
14. Geving, B., and I. Ebert-Uphoff, 2000, "Enhancement of Stereo-Lithography Technology to Support Building Around Inserts, " Proceedings of the 2000 ASME Mechanisms and Robotics Conference, Baltimore MD, September 10-13.
15. Golnas, A., 1999, "Thin-Film Thermo-Mechanical Sensors Embedded in Metallic Structures, " Doctoral Dissertation, Stanford University.
16. Hatanaka, M. and R. Mark, 2003, "Process Planning for Embedding Flexible Materials in Multi-Material Prototypes, " Proceedings of the ASME Design Engineering Technical Conference, vol. 3, pp. 325-333.
17. Hatanaka, M., 2005, "Design and Fabrication of Multimaterial Flexible Mechanisms With Embedded Components, " Doctoral Dissertation, Stanford University.
18. Janaki Ram, G.D., C. Robinson, Y. Yang, and B. E. Stucker, 2007, "Use of Ultrasonic Consolidation for Fabrication of Multi-Material Structures, " Rapid Prototyping Journal, 13 (4) pp. 226-235.
19. Kataria, A., 2000, "Standardization and Process Planning for Building Around Inserts in Stereolithography Apparatus, " Masters Thesis, Georgia Institute of Technology.
20. Kataria, A., and D. W. Rosen, 2001, "Building Around Inserts: Methods for Fabricating Complex Devices in Stereolithography, " Rapid Prototyping Journal, 7 (5), pp. 253-261.
21. Kathryn, J. and F.F. Kong, 2002, "Procedure for Rapid Fabrication of Non-assembly Mechanisms with Embedded Components, " Proceedings of the ASME Design Engineering Technical Conference, Montreal, Canada, September 29-October 2, pp. 1239-1245.
22. Kong, C. Y. and R. Soar, 2005, "Method for embedding optical fibers in an aluminum matrix by ultrasonic consolidation, " Applied Optics, 44, 6325-6333.
23. Kong, C.Y., R. C. Soar and P.M. Dickens, 2004, "Ultrasonic Consolidation for Embedding SMA Fibres Within Aluminum Matrices, " Composite Structures, 66 (1-4), pp.421-427.
24. Kumar, V., S. Rajagopalan, M. Cutkosky and D. Dutta, 1998, "Representation and Processing of Heterogeneous Objects for Solid Freeform Fabrication, " Geometric Modeling Workshop, Dec. 7-9, Tokyo.
25. Li, X., 2001, "Embedded Sensors in Layered Manufacturing, " Doctoral Dissertation, Stanford University.
26. Li, X., 2003, "Embedded Fiber Bragg Grating Sensors in Polymer Structures Fabricated by Layered Manufacturing, " Journal of Manufacturing Processes, 5(1), pp.78-86.
27. Li, X., 2003, "Metal Embedded Fiber Bragg Grating Sensors in Layered Manufacturing, " Journal of Manufacturing Science and Engineering, 125(3), pp. 577-586.
28. Li, X., A. Glonas and F. Prinz, 2000, "Shape Deposition Manufacturing of Smart Metallic Structures with Embedded Sensors, " SPIE's 7th International Symposium on Smart Structures and Materials, Vol. 3986, p.160-171.
29. Liao, Y.S., H. C. Li and M. T. Chen, 2006, "The Study of Rapid Prototyping Process with Embedded Functional Inserts, " Journal of Materials Processing Technology, Volumes 192-193, pp.68-74.
30. Lopes, A.J., A. V. Inamdar, F. Medina, R. E. Hennessey, J. A. Palmer, B. D. Chavez, D.W Davis, P. G. Gallegos and R. B. Wicker, 2005, "Rapid Electromechanical Device Manufacturing using a Hybrid Direct Write Stereolithography System, " TexMEMS VII International Conference on Micro Electro Mechanical Systems, Sept. 21-23, El Paso, TX.
31. Medina, F., A. J. Lopes, A. V. Inamdar, R. Hennessey, J. Palmer, B. Chavez, D. Davis, P. Gallegos, and R.B. Wicker, 2005, "Hybrid manufacturing: Integrating direct write and stereolithography, " The Sixteenth Solid Freeform Fabrication Proceedings, Austin, TX.
32. Nau, W. H., 1991, "Embedding Sensors Using Stereolithography, " Master of Science Thesis, Clemson University.
33. Palmer, J. A., 2005, "Realizing 3-D Interconnected Direct Write Electronics Within Smart Stereolithography Structures, " ASME International Mechanical Engineering Congress and Exposition, November 5-11, pp. 287-293, Orlando, FL.
34. Robinson, C.J., B. Stucker, A. J. Lopes, R. Wicker, and J.A. Palmer, 2006, "Integration of Direct Write (DW) and Ultrasonic Consolidation (UC) Technologies to Create Advanced Structures with Embedded Electrical Circuitry, " Solid Freeform Fabrication Symposium, Austin, TX.
35. Safari, A. and S.C. Danforth, 1998, "Development of Novel Piezoelectric Ceramics and Composites for Sensors and Actuators by Solid Freeform Fabrication, " IEEE International Symposium on Applications of Ferroelectrics, p.229-234.
36. Siggard, E.J., A. S. Madhusoodanan, B. Stucker and B. Eames, 2006, "Structurally Embedded Electrical Systems Using Ultrasonic Consolidation (UC)", Proceedings of the 17th Solid Freeform Fabrication Symposium, Austin, TX.
37. Siggard, E., 2007, "Investigative Research Into the Structural Embedding of Electrical and Mechanical Systems Using Ultrasonic Consolidation (UC), " Masters Thesis, Utah State University.
38. Smailagic, A. and D. P. Siewiorek, 1993, "A Case Study in Embedded-System Design: The VuMan 2 Wearable Computer, " IEEE Design and Test of Computers, 10 (3) pp. 56-67, September.
39. Sun, L. and L.L. Shaw, 1999, "Solid Freeform Fabrication of In-situ SiC/C Thermocouples in Macrocomponents, " Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 30 (9), pp. 2549-2552.
40. Sun, L., K. J. Jakubenas, J. E. Crocker, S. Harrison, L. L. Shaw and H.L. Marcus, 1998, "In Situ Thermocouples In Macro-components Fabricated Using SALD and SALDVI Techniques. II. Evaluation of processing parameters", Materials and Manufacturing Processes, 13 (6) pp.883-907.
41. Weiss, L.E. and F.B. Prinz, 1997, "Shape deposition Manufacturing of Heterogeneous Structures, " Journal of Manufacturing Systems, 16 (4) pp. 239-248.
42. Yang, Y., 2008, "Fabrication of Long-Fiber-Reinforced Metal Matrix Composites Using Ultrasonic Consolidation, " Doctoral Dissertation, Utah State University.