Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys

Corrosion Science

Volumn 83, Issue , 2014, Pages 245-254

  Cvijovic Alagic I ^a   Cvijovic Z ^b   Bajat, J ^b   Rakin, M ^b  

^a UNIVERSITY OF BELGRADE   (Serbia)

^b UNIVERSITY OF BELGRADE   (Serbia)

Author keywords

A. Alloys; A. Titanium; B. EIS; B. Polarization; B. XRD; C. Passive films

Indexed keywords

ALLOYS; CORROSION RESISTANCE; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; POLARIZATION; ZIRCONIUM; ZIRCONIUM ALLOYS;

B. EIS; BIOMEDICAL TITANIUM ALLOY; ELECTROCHEMICAL BEHAVIOUR; ELECTROCHEMICAL CHARACTERISTICS; MARTENSITIC MICROSTRUCTURE; PASSIVE FILMS; THERMO-MECHANICAL PROCESSING; XRD;

TITANIUM ALLOYS;

EID: 84897113823     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2014.02.017     Document Type: Article

References (57)

1. Long M., Rack H.J. Titanium alloys in total joint replacement - a materials science perspective. Biomaterials 1998, 19:1621-1639.
2. Geetha M., Singh A.K., Asokamani R., Gogia A.K. Ti based biomaterials, the ultimate choice for orthopaedic implants - a review. Prog. Mater. Sci. 2009, 54:397-425.
3. Niinomi M. Mechanical biocompatibilities of titanium alloys for biomedical applications. J. Mech. Behav. Biomed. Mater. 2008, 1:30-42.
4. Lin C.-W., Ju C.-P., Chern Lin J.-H. A comparison of the fatigue behavior of cast Ti-7.5Mo with c.p. titanium, Ti-6Al-4V and Ti-13Nb-13Zr alloys. Biomaterials 2005, 26:2899-2907.
5. I. Cvijović-Alagić, Damage and Fracture Resistance of Titanium based Alloys for Medical Application, Ph.D. Thesis, University of Belgrade, 2013.
6. Sumner D.R., Galante J.O. Determinants of stress shielding: design versus materials versus interface. Clin. Orthop. Relat. Res. 1992, 274:202-212.
7. Niemeyer T.C., Grandini C.R., Pinto L.M.C., Angelo A.C.D., Schneider S.G. Corrosion behaviour of Ti-13Nb-13Zr alloy used as a biomaterial. J. Alloys Compd. 2009, 476:172-175.
8. Rack H.J., Qazi J.I. Titanium alloys for biomedical applications. Mater. Sci. Eng. C 2006, 26:1269-1277.
9. Geetha M., Singh A.K., Gogia A.K., Asokamani R. Effect of thermomechanical processing on evolution of various phases in Ti-Nb-Zr alloys. J. Alloys Compd. 2004, 384:131-144.
10. Geetha M., Singh A.K., Muraleedhavan K., Gogia A.K., Asokamani R. Effect of thermomechanical processing on microstructure of a Ti-13Nb-13Zr alloy. J. Alloys Compd. 2001, 329:264-271.
11. Khan M.A., Williams R.L., Williams D.F. The corrosion behaviour of Ti-6Al-4V, Ti-6Al-7Nb and Ti-13Nb-13Zr in protein solutions. Biomaterials 1999, 20:631-637.
12. Li J., Zhou L., Li Z.-C. Microstructures and mechanical properties of a new titanium alloy for surgical implant application. Int. J. Miner. Metall. Mater. 2010, 17:185-191.
13. Walker P.R., Le Blanc J., Sikorska M. Effects of aluminium and other cations on the structure of brain and liver chromatin. Biochemistry 1989, 28:3911-3915.
14. Rao S., Ushida T., Tateishi T., Okazaki Y., Asao S. Effect of Ti, Al, and V ions on the relative growth rate of fibroblasts (L929) and osteoblasts (MC3T3-E1) cells. Biomed. Mater. Eng. 1996, 6:79-86.
15. Steinemann S.G. Corrosion of surgical implants - in vivo and in vitro tests. Evaluation of Biomaterials 1980, 1-34. Wiley, New York. G.D. Winter (Ed.).
16. Assis S.L., Rogero S.O., Antunes R.A., Padilha A.F., Costa I. A comparative study of the in vitro corrosion behavior and cytotoxicity of a superferritic stainless steel, a Ti-13Nb-13Zr alloy, and an austenitic stainless steel in Hank's solution. J. Biomed. Mater. Res. B Appl. Biomater. 2005, 73:109-116.
17. Vasilescu C., Drob S.I., Neacsu E.I., Mirza Rosca J.C. Surface analysis and corrosion resistance of a new titanium base alloy in simulated body fluids. Corros. Sci. 2012, 65:431-440.
18. Calderon Moreno J.M., Vasilescu E., Drob P., Osiceanu P., Vasilescu C., Drob S.I., Popa M. Surface and electrochemical characterization of a new ternary titanium based alloy behaviour in electrolytes of varying pH. Corros. Sci. 2013, 77:52-63.
19. Duarte L.T., Biaggio S.R., Rocha-Filho R.C., Bocchi N. Surface characterization of oxides grown on the Ti-13Nb-13Zr alloy and their corrosion protection. Corros. Sci. 2013, 72:35-40.
20. Baptista C.A.R.P., Schneider S.G., Taddei E.B., da Silva H.M. Fatigue behavior of arc melted Ti-13Nb-13Zr alloy. Int. J. Fatigue 2004, 26:967-973.
21. Robin A., Carvalho O.A.S., Schneider S.G., Schneider S. Corrosion behavior of Ti-xNb-13Zr alloys in Ringer's solution. Mater. Corros. 2008, 59:929-933.
22. Choubey A., Basu B., Balasubramaniam R. Electrochemical behavior of Ti-based alloys in simulated human body fluid environment. Trends Biomater. Artif. Organs 2005, 18:64-72.
23. Khan M.A., Williams R.L., Williams D.F. In-vitro corrosion and wear of titanium alloys in the biological environment. Biomaterials 1996, 17:2117-2126.
24. Geetha M., Kamachi Mudali U., Gogia A.K., Asokamani R., Raj B. Influence of microstructure and alloying elements on corrosion behavior of Ti-13Nb-13Zr alloy. Corros. Sci. 2004, 46:877-892.
25. Khan M.A., Williams R.L., Williams D.F. Conjoint corrosion and wear in titanium alloys. Biomaterials 1999, 20:765-772.
26. Oliveira N.T.C., Ferreira E.A., Duarte L.T., Biaggio S.R., Rocha-Filho R.C., Bocchi N. Corrosion resistance of anodic oxides on the Ti-50Zr and Ti-13Nb-13Zr alloys. Electrochim. Acta 2006, 51:2068-2075.
27. Atapour M., Pilchak A., Frankel G.S., Williams J.C., Fathi M.H., Shamanian M. Corrosion behavior of Ti-6Al-4V with different thermomechanical treatments and microstructures. Corrosion 2010, 66(6):065004.1-065004.9.
28. Yu S.Y., Scully J.R. Corrosion and passivity of Ti-13%Nb-13%Zr in comparison to other biomedical implant alloys. Corrosion 1997, 53:965-976.
29. Assis S.L., Costa I. Electrochemical evaluation of Ti-13Nb-13Zr, Ti-6Al-4V and Ti-6Al-7Nb alloys for biomedical application by long-term immersion tests. Mater. Corros. 2007, 58:329-333.
30. Assis S.L., Wolynec S., Costa I. The electrochemical behaviour of Ti-13Nb-13Zr alloy in various solutions. Mater. Corros. 2008, 59:739-743.
31. Vasilescu E., Drob P., Raducanu D., Cinca I., Mareci D., Calderon Moreno J.M., Popa M., Vasilescu C., Mirza Rosca J.C. Effect of thermo-mechanical processing on the corrosion resistance of Ti6Al4V alloys in biofluids. Corros. Sci. 2009, 51:2885-2896.
32. Milošev I., Metikoš-Huković M., Strehblow H.-H. Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy. Biomaterials 2000, 21:2103-2113.
33. Popa M.V., Raducanu D., Vasilescu E., Drob P., Cojocaru D., Vasilescu C., Ivanescu S., Mirza Rosca J.C. Mechanical and corrosion behaviour of a Ti-Al-Nb alloy after deformation at elevated temperatures. Mater. Corros. 2008, 59:919-928.
34. Alves V.A., Reis R.Q., Santos I.C.B., Souza D.G., de T., Goncalves F., Pereira-da-Silva M.A., Rossi A., da Silva L.A. In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti-6Al-4V in simulated body fluid at 25°C and 37°C. Corros. Sci. 2009, 51:2473-2482.
35. Lavos-Valereto I.C., Wolynec S., Ramires I., Guastaldi A.C., Costa I. Electrochemical impedance spectroscopy characterization of passive film formed on implant Ti-6Al-7Nb alloy in Hank's solution. J. Mater. Sci. Mater. Med. 2004, 15:55-59.
36. 2 pretreatment. J. Biomed. Mater. Res. 1998, 40:244-256.
37. Cvijović-Alagić I., Cvijović Z., Mitrović S., Panić V., Rakin M. Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution. Corros. Sci. 2011, 53:796-808.
38. Souto R.M., Laz M.M., Reis R.L. Degradation characteristics of hydroxyapatite coatings on orthopaedic TiAlV in simulated physiological media investigated by electrochemical impedance spectroscopy. Biomaterials 2013, 24:4213-4221.
39. Duarte L.T., Biaggio S.R., Rocha-Filho R.C., Bocchi N. Influence of hydroxyapatite on the corrosion resistance of the Ti-13Nb-13Zr alloy. J. Mater. Sci. Mater. Med. 2009, 20:1009-1015.
40. Oliveira N.T.C., Biaggio S.R., Piazza S., Sunseri C., Di Quarto F. Photo-electrochemical and impedance investigation of passive layers grown anodically on titanium alloys. Electrochim. Acta 2004, 49:4563-4576.
41. Shukla A.K., Balasubramaniam R. Effect of surface treatment on electrochemical behavior of CP Ti, Ti-6Al-4V and Ti-13Nb-13Zr alloys in simulated humanbody fluid. Corros. Sci. 2006, 48:1696-1720.
42. Marino C.E.B., Biaggio S.R., Rocha-Filho R.C., Bocchi N. Voltammetric stability of anodic films on the Ti6Al4V alloy in chloride medium. Electrochim. Acta 2006, 51:6580-6583.
43. Burstein G.T., Liu C., Souto R.M. The effect of temperature on the nucleation of corrosion pits on titanium in Ringer's physiological solution. Biomaterials 2005, 26:245-256.
44. Paszenda Z., Walke W., Jadacka S. Electrochemical investigations of Ti6Al4V and Ti6Al7Nb alloys used on implants in bone surgery. J. Achievements Mater. Manuf. Eng. 2010, 38:24-32.
45. Zhang X.L., Jiang Zh.H., Yao Zh.P., Song Y., Wu Zh.D. Effects of scan rate on the potentiodynamic polarization curve obtained to determine the Tafel slopes and corrosion current density. Corros. Sci. 2009, 51:581-587.
46. Vasilescu C., Drob P., Vasilescu E., Demetrescu I., Ionita D., Prodana M., Drob S.I. Characterisation and corrosion resistance of the electrodeposited hydroxyapatite and bovine serum albumin/hydroxyapatite films on Ti-6Al-4V-1Zr alloy surface. Corros. Sci. 2011, 53:992-999.
47. Pohrelyuk I.M., Fedirko V.M., Tkachuk O.V., Proskurnyak R.V. Corrosion resistance of Ti-6Al-4V alloy with nitride coatings in Ringer's solution. Corros. Sci. 2013, 66:392-398.
48. Davidson J.A., Mishra A.K., Kovacks P., Poggie R.A. New surface-hardened, lowmodulus, corrosion-resistant Ti-13Nb-13Zr alloy for total hip arthroplasty. Biomed. Mater. Eng. 1994, 4:231-243.
49. Ahmed T., Rack H.J. Phase transformations during cooling in α+β titanium alloys. Mater. Sci. Eng. A 1998, 243:206-211.
50. Metikoš-Huković M., Kwokal A., Piljac J. The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution. Biomaterials 2003, 24:3765-3775.
51. Stern M., Geary A.L. Electrochemical polarization. I. A theoretical analysis of the shape of polarization curves. J. Electrochem. Soc. 1957, 104:56-63.
52. Ramires I., Guastaldi A.C. Study of Ti-6Al-4V biomaterial using electrochemistry and XPS techniques. Química Nova 2002, 25:10-14.
53. Marino C.E.B., de Oliveira E.M., Rocha-Filho R.C., Biaggio S.R. On the stability of thin-anodic-oxide films of titanium in acid phosphoric media. Corros. Sci. 2001, 43:1465-1476.
54. Ask M., Lausama K.B. Preparation and surface spectroscopic characterization of oxide films on Ti6Al4V. Appl. Surf. Sci. 1989, 35:283-301.
55. Okazaki Y., Tateishi T., Ito Y. Corrosion resistance of implant alloys in pseudo physiological solution and role of alloying elements in passive films. Mater. Trans. JIM 1997, 38:78-86.
56. Wolner C., Nauer G.E., Trummer J., Putz V., Tschegg S. Possible reasons for the unexpected bad biocompatibility of metal-on-metal hip implants. Mater. Sci. Eng. C 2006, 26:34-40.
57. Wang W., Mohammadi F., Alfantazi A. Corrosion behaviour of niobium in phosphate buffered saline solutions with different concentrations of bovine serum albumin. Corros. Sci. 2012, 57:11-21.