A review on the study of the generation of (nano)particles aerosols during the mechanical solicitation of materials

Journal of Nanomaterials

Volumn 2014, Issue , 2014, Pages

  Shandilya, Neeraj ^a,b   Le Bihan, Olivier ^a   Morgeneyer, Martin ^b  

^a INSTITUT NATIONAL DE L ENVIRONNEMENT INDUSTRIEL ET DES RISQUES INERIS   (France)

^b UNIVERSITÉ DE TECHNOLOGIE DE COMPIÈGNE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84894713630     PISSN: 16874110     EISSN: 16874129     Source Type: Journal    
DOI: 10.1155/2014/289108     Document Type: Review

References (78)

1. Kulkarni P., Baron P. A., Willeke K., Aerosol Measurement: Principle, Techniques and Applications 2011 3rd Hoboken, NJ, USA John Wiley and Sons
2. Oberdörster G., Oberdörster E., Oberdörster J., Nanotoxicology: an emerging discipline evolving from studies of ultrafine particles. Environmental Health Perspectives 2005 113 823 839
3. Houdy P., Lahmani M., Marano F., Nanoethics and Nanotoxicology 2011 1st Heidelberg, Germany Springer
4. Bekker C., Brouwer D. H., Tielemans E., Pronk A., Industrial production and professional application of manufactured nanomaterials-enabled end products in Dutch industries, potential for exposure. The Annals of Occupational Hygiene 2012 57 3 314 327 10.1093/annhyg/mes072
5. Kaluza S., Balderhaar J. K., Orthen B., Honnert B., Jankowska E., Rosell M. G., Tanarro C., Tejedor J., Zugasti A., Workplace exposure to nanoparticles. 2010
6. Buzea C., Blandino I. I. P., Robbie K., Nanomaterials and nanoparticles: sources and toxicity. Biointerphases 2007 2 4 MR17 MR172
7. Scientific Committee on Emerging, Newly Identified Health Risks (SCENIHR), The appropriateness of existing methodologies to assess the potential risks associated with engineered and adventitious products of nanotechnologies. Health and Consumer Protection Directorate-General, European Commission, 2006
8. Ostiguy C., Roberge B., Ménard L., Endo C. A., Best Practices Guide to Synthetic Nanoparticle Risk Management, L'Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST). Report 2009 R-599
9. National Institute for Occupational Safety and Health (NIOSH), Centers for Disease Control and Prevention (CDC), Approaches to Safe Nanotechnology. Publication 2009 2009-125
10. Zimmer A. T., Maynard A. D., Investigation of the aerosols produced by a high-speed, hand-held grinder using various substrates. Annals of Occupational Hygiene 2002 46 8 663 672 2-s2.0-0036832797 10.1093/annhyg/mef089
11. Guiot A., Golanski L., Tardif F., Measurement of nanoparticle removal by abrasion. Journal of Physics 2009 170 2-s2.0-67650954627 10.1088/1742-6596/170/ 1/012014 012014
12. Kukutschová J., Roubíček V., Malachová K., Pavlíčková Z., Holuša R., Kubačková J., Mička V., MacCrimmon D., Filip P., Wear mechanism in automotive brake materials, wear debris and its potential environmental impact. Wear 2009 267 5-8 807 817 2-s2.0-65749111305 10.1016/j.wear.2009.01.034
13. Vorbau M., Hillemann L., Stintz M., Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings. Journal of Aerosol Science 2009 40 3 209 217 2-s2.0-59849083720 10.1016/j.jaerosci.2008.10.006
14. Schlagenhauf L., Chu B. T. T., Buha J., Nüesch F., Wang J., Release of carbon nanotubes from an epoxy-based nanocomposite during an Abrasion process. Environmental Science and Technology 2012 46 7366 7372
15. Wohlleben W., Brill S., Meier M. W., Mertler M., Cox G., Hirth S., Von Vacano B., Strauss V., Treumann S., Wiench K., Ma-Hock L., Landsiedel R., On the lifecycle of nanocomposites: comparing released fragments and their in-vivo hazards from three release mechanisms and four nanocomposites. Small 2011 7 16 2384 2395 2-s2.0-80051720430 10.1002/smll.201002054
16. Zhang Z.-Z., Su F.-H., Wang K., Jiang W., Men X.-H., Liu W.-M., Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles. Materials Science and Engineering A 2005 404 1-2 251 258 2-s2.0-23844529455 10.1016/j.msea.2005.05.084
17. Rendón J., Olsson M., Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear 2009 267 11 2055 2061 2-s2.0-71749115772 10.1016/j.wear.2009.08.005
18. Bowden F. P., Tabor D., The Friction and Lubrication of Solids 1954 Oxford, UK Clarendon Press
19. Green A. P., Friction between unlubricated metals: a theoretical analysis of the junction model. Proceedings of the Royal Society A 1955 228 191 204
20. Kapoor A., Williams J. A., Johnson K. L., The steady state sliding of rough surfaces. Wear 1994 175 1-2 81 92 2-s2.0-0028450445
21. Olofsson U., Hagman L., Model for micro-slip between flat surfaces based on deformation of ellipsoidal elastic bodies. Tribology International 1997 30 8 599 603 2-s2.0-0031197431 10.1016/S0301-679X(97)00028-5
22. Blau P. J., Friction, Lubrication, and Wear Technology Vol. 18 1992 ASM Handbook
23. Le Bihan O., Shandilya N., Gheerardyn L., Guillon O., Dore E., Morgeneyer M., Investigation of the release of particles from a nanocoated producted. Advances in Nanoparticles 2013 2 39 44
24. Hokkirigawa K., Kato K., An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear. Tribology International 1988 21 1 51 57 2-s2.0-0023964517
25. McCawley M. A., Kent M. S., Berakis M. T., Ultrafine beryllium number concentration as a possible metric for chronic beryllium disease risk. Applied Occupational and Environmental Hygiene 2001 16 5 631 638 2-s2.0-0035024726
26. Choe K. T., Trunov M., Grinshpun S. A., Willeke K., Harney J., Trakumas S., Mainelis G., Bornschein R., Clark S., Friedman W., Particle settling after lead-based paint abatement work and clearance waiting period. The American Industrial Hygiene Association Journal 2000 61 6 798 807 2-s2.0-0034452147
27. Koponen I. K., Jensen K. A., Schneider T., Sanding dust from nanoparticle-containing paints: physical characterisation. Journal of Physics 2009 151 2-s2.0-65649115118 10.1088/1742-6596/151/1/012048 012048
28. Garg B. D., Cadle S. H., Mulawa P. A., Groblicki P. J., Laroo C., Parr G. A., Brake wear particulate matter emissions. Environmental Science and Technology 2000 34 21 4463 4469 2-s2.0-0034331383 10.1021/es001108h
29. Sanders P. G., Xu N., Dalka T. M., Maricq M. M., Airborne brake wear debris: size distributions, composition, and a comparison of dynamometer and vehicle tests. Environmental Science and Technology 2003 37 18 4060 4069 2-s2.0-0041689552 10.1021/es034145s
30. Gläsel H.-J., Bauer F., Ernst H., Findeisen M., Hartmann E., Langguth H., Mehnert R., Schubert R., Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles. Macromolecular Chemistry and Physics 2000 201 18 2765 2770 2-s2.0-4243506498
31. Knotek O., Lugscheider E., Löffler F., Krämer G., Zimmermann H., Abrasive wear resistance and cutting performance of complex PVD coatings. Surface and Coatings Technology 1994 68-69 489 493 2-s2.0-0028671109
32. 2 nanoparticles from nanocomposites. Polymer Degradation and Stability 2009 94 5 873 876 2-s2.0-63349100925 10.1016/j.polymdegradstab.2009.02.005
33. Pandey J. K., Raghunatha Reddy K., Pratheep Kumar A., Singh R. P., An overview on the degradability of polymer nanocomposites. Polymer Degradation and Stability 2005 88 2 234 250 2-s2.0-14544291405 10.1016/j.polymdegradstab.2004. 09.013
34. 2 nanoparticles in photooxidation of polyurethane. Polymer Testing 2007 26 2 202 208 2-s2.0-33846705749 10.1016/j.polymertesting. 2006.10.002
35. 2 nanoparticle emission from exterior facades into the aquatic environment. Environmental Pollution 2008 156 2 233 239 2-s2.0-58149143190 10.1016/j.envpol.2008.08.004
36. Wohlleben W., Meier M. W., Vogel S., Landsiedel R., Cox G., Hirth S., Tomovi Z., Elastic CNT-polyurethane nanocomposite: synthesis, performance and assessment of fragments released during use. Nanoscale 2013 5 369 380
37. 2 nanopowder coating materials. Journal of Nanoparticle Research 2007 9 1 157 163 2-s2.0-33845916565 10.1007/s11051-006-9185-3
38. Sachse S., Silva F., Zhu H., Irfan A., Leszczynska A., Pielichowski K., The effect of nanoclay on dust generation during drilling process of polyamide 6 nanocomposites. Nanomaterials 2012 2012 8 189386 10.1155/2012/189386
39. Gohler D., Stintz M., Hillemann L., Vorbau M., Characterization of Nanoparticle release from surface coatings by the simulation of a sanding process. Annals of Occupational Hygiene 2010 54 615 624
40. Morgeneyer M., Le Bihan O., Ustache A., Aguerre-Chariol O., Experimental study of the aerosolization of fine alumina particles from bulk by a vortex shaker. Powder Technology 2013 246 583 589
41. 2 Nanopowders. Kona 2007 25 190 204
42. Baron P. A., Maynard A. D., Foley M., Evaluation of Aerosol Release during the handling of Unrefined Single Walled Carbon Nanotube Material. NIOSH 2003 DART-02-191
43. Maynard A. D., Baron P. A., Foley M., Shvedova A. A., Kisin E. R., Castranova V., Exposure to carbon nanotube material: aerosol release during the handling of unrefined single-walled carbon nanotube material. Journal of Toxicology and Environmental Health A 2004 67 1 87 107 2-s2.0-1642503815
44. Ogura I., Sakurai H., Gamo M., Dustiness testing of engineered nanomaterials. Journal of Physics 2009 170 2-s2.0-67651007541 10.1088/1742-6596/170/1/012003 012003
45. Plitzko S., Gierke E., Dziurowitz N., Brobell D., Generation of CNT/CNF dusts by a shaker aerosol generator in combination with a thermal precipitator as the collection system for characterization of the fibre morphology. Gefahrstoffe Reinhaltung der Luft 2010 70 1-2 31 35 2-s2.0-77956004914
46. Kuhlbusch T. A. J., Asbach C., Fissan H., Göhler D., Stintz M., Nanoparticle exposure at nanotechnology workplaces: a review. Particle and Fibre Toxicology 2011 8, article 22 2-s2.0-79960660048 10.1186/1743-8977-8-22
47. Thorpe A., Brown R. C., Measurements of the effectiveness of dust extraction systems of hand sanders used on wood. Annals of Occupational Hygiene 1994 38 3 279 302 2-s2.0-0028454903
48. Le Bihan O., Morgeneyer M., Shandilya N., Chariol O. A., Bressot C., Handbook on Safe Use of Nanomaterials Chapter 7.2: Emission Chambers, A Method for Nanosafety 2014 San Diego, Calif, USA Academic Press
49. R'mili B., Le Bihan O., Dutouquet C., Aguerre-Charriol O., Frejafon E., Particle sampling by TEM grid filtration. Aerosol Science and Technology 47 767 775
50. George M., Goddard D. T., The characterisation of rough particle contacts by atomic force microscopy. Journal of Colloid and Interface Science 2006 299 2 665 672 2-s2.0-33744775063 10.1016/j.jcis.2006.03.021
51. Drelich J., Adhesion forces measured between particles and substrates with nano-roughness. Minerals and Metallurgical Processing 2006 23 4 226 232 2-s2.0-33846432009
52. Esayanur M. S., Yeruva S. B., Rabinovich Y. I., Moudgil B. M., Interaction force measurements using atomic force microscopy for characterization and control of adhesion, dispersion and lubrication in particulate systems. Journal of Adhesion Science and Technology 2005 19 8 611 626 2-s2.0-25444479969 10.1163/1568561054890516
53. Jallo L. J., Chen Y., Bowen J., Etzler F., Dave R., Prediction of inter-particle adhesion force from surface energy and surface roughness. Journal of Adhesion Science and Technology 2011 25 4-5 367 384 2-s2.0-78751676320 10.1163/016942410X525623
54. Ding W. Q., Micro/nano-particle manipulation and adhesion studies. Adhesion Science and Technology 2008 22 457 480
55. Yuan C., Jin Z., Tipper J. L., Yan X., Numerical surface characterization of wear debris from artificial joints using atomic force microscopy. Chinese Science Bulletin 2010 54 24 4583 4588 2-s2.0-74749086400 10.1007/s11434-009- 0588-2
56. Haris A., Adachi T., Araki W., Nano-scale characterization of fracture surfaces of blended epoxy resins related to fracture properties. Materials Science and Engineering A 2008 496 1-2 337 344 2-s2.0-51749088335 10.1016/j.msea.2008.06.030
57. Turri S., Torlaj L., Piccinini F., Levi M., Abrasion and nanoscratch in nanostructured epoxy coatings. Journal of Applied Polymer Science 2010 118 3 1720 1727 2-s2.0-77956422632 10.1002/app.32309
58. Degiampietro K., Colaço R., Nanoabrasive wear induced by an AFM diamond tip on stainless steel. Wear 2007 263 7-12 1579 1584 2-s2.0-34548040003 10.1016/j.wear.2006.10.020
59. Munz M., Kim J.-H., Krause O., Roy D., Imaging surfaces of nano-scale roughness by atomic force microscopy with carbon nanotubes as tips: a comparative study. Surface and Interface Analysis 2011 43 11 1382 1391 2-s2.0-80053957181 10.1002/sia.3727
60. Holm R., Electrical Contacts 1946 Stockholm, Sweden H. Gerbers
61. Mulhearn T. O., Samuels L. E., The abrasion of metals: a model of the process. Wear 1962 5 6 478 498 2-s2.0-0000488317
62. Rabinowicz E., Friction and Wear of Materials 1965 New York, NY, USA John Wiley and Sons
63. Lawn B. R., A model for the wear of brittle solids under fixed abrasive conditions. Wear 1975 33 2 369 372 2-s2.0-5544254254
64. Sundararajan G., A new model for two-body abrasive wear based on the localization of plastic deformation. Wear 1987 117 1 1 35 2-s2.0-0023360141
65. Torrance A. A., Buckley T. R., A slip-line field model of abrasive wear. Wear 1996 196 1-2 35 45 2-s2.0-0030208691
66. Olofsson U., Cyclic micro-slip under unlubricated conditions. Tribology International 1995 28 4 207 217 2-s2.0-0029313902
67. Jiang J., Sheng F., Ren F., Modelling of two-body abrasive wear under multiple contact conditions. Wear 1998 217 1 35 45 2-s2.0-0032048539
68. Fang L., Xing J., Liu W., Xue Q., Wu G., Zhang X., Computer simulation of two-body abrasion processes. Wear 2001 250-251 2 1356 1360 2-s2.0-0035482665
69. Fouvry S., Liskiewicz T., Kapsa P., Hannel S., Sauger E., An energy description of wear mechanisms and its applications to oscillating sliding contacts. Wear 2003 255 1-6 287 298 2-s2.0-0042128806 10.1016/S0043-1648(03) 00117-0
70. Torrance A. A., Modelling abrasive wear. Wear 2005 258 1-4 281 293 2-s2.0-10444235716 10.1016/j.wear.2004.09.065
71. Siniawski M. T., Harris S. J., Wang Q., A universal wear law for abrasion. Wear 2007 262 7-8 883 888 2-s2.0-33847177294 10.1016/j.wear.2006.08. 017
72. De Moerlooze K., Al-Bender F., Van Brussel H., A novel energy-based generic wear model at the asperity level. Wear 2011 270 11-12 760 770 2-s2.0-79954887068 10.1016/j.wear.2011.01.028
73. Eriten M., Polycarpou A. A., Bergman L. A., Physics-based modeling for partial slip behavior of spherical contacts. International Journal of Solids and Structures 2010 47 18-19 2554 2567 2-s2.0-77955270137 10.1016/j.ijsolstr.2010. 05.017
74. Eriten M., Polycarpou A. A., Bergman L. A., Physics-based modeling for fretting behavior of nominally flat rough surfaces. International Journal of Solids and Structures 2011 48 10 1436 1450 2-s2.0-79952985990 10.1016/j.ijsolstr.2011.01.028
75. Kato M., Tsuruta A., Kuroda S., Osawa Z., Effect of stereoregularity on the photo-oxidative degradation and weathering of polypropylenes. Polymer Degradation and Stability 2000 67 1 1 5 2-s2.0-0033897782 10.1016/S0141-3910(99) 00098-1
76. Castejon M. L., Tiemblo P., Gomez-Elvira J. M., Physicochemical processes along the early stages of the thermal degradation of isotactic polypropylene. Polymer Degradation and Stability 2000 70 297 302
77. Li J., Yang R., Yu J., Liu Y., Natural photo-aging degradation of polypropylene nanocomposites. Polymer Degradation and Stability 2008 93 1 84 89 2-s2.0-38349049423 10.1016/j.polymdegradstab.2007.10.022
78. Schütz E., Berger F., Dirckx O., Chambaudet A., Study of degradation mechanisms of a paint coating during an artificial aging test. Polymer Degradation and Stability 1999 65 1 123 130 2-s2.0-0344614646 10.1016/S0141-3910(98)00227-4