Influence of surface roughness on the electrochemical behavior of carbon steel

Journal of Applied Electrochemistry

Volumn 43, Issue 5, 2013, Pages 507-514

  Kim, Su Kyeng ^a   Park, In Jun ^a   Lee, Dong Young ^a   Kim, Jung Gu ^a  

^a Sungkyunkwan University   (South Korea)

Author keywords

Atomic force microscopy; Corrosion; Kelvin probe force microscopy; Surface roughness; Volta potential

Indexed keywords

ATOMIC FORCE MICROSCOPY; CORROSION; CORROSION RATE; CORROSION RESISTANCE; CORROSIVE EFFECTS; GALVANIC CORROSION; LANDFORMS; PROBES; STEEL CORROSION; STEEL TESTING; SURFACE TESTING;

CORROSION PROPERTY; ELECTROCHEMICAL BEHAVIORS; ELECTROCHEMICAL TEST; ELECTRON WORK FUNCTIONS; KELVIN PROBE FORCE MICROSCOPY; VOLTA POTENTIAL; VOLTA-POTENTIAL DIFFERENCE;

SURFACE ROUGHNESS;

EID: 84893696785     PISSN: 0021891X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10800-013-0534-5     Document Type: Article

References (42)

1. Richardson T, Cottis B, Lindsay R., Lyon S, Scantlebury D, Scott H., Graham M. (2010) Shreir's corrosion, vol 4. Elsevier, Amsterdam
2. Fontana MG (1986) Corrosion engineering. McGraw-Hill, Singapore
3. Talbot DEJ, Talbot JDR (2007) Corrosion science and technology. CRC Press, Boca Raton
4. Schulze V (2006) Modern mechanical surface treatment. Wiley-VCH, Weinheim
5. Li W, Amirfazli A. (2005) A thermordynamic approach for determining the contact angle hysteresis for superhydrophobic surfaces. J Colloid Interface Sci 292:195-201. doi:10.1016/j.jcis. 2005.05.062
6. Li W, Amirfazli A. (2007) Microtextured superhydrophobic surfaces: a thermodynamic analysis. Adv Colloid Interface Sci 132:51-68. doi:10.1016/j.cis.2007.01.001
7. Silverman DC (2004) The rotating cylinder electrode for examining velocity-sensitive corrosion-a review. Corrosion 60:1003-1023. doi:10.5006/1.3299215
8. Ashcroft NW, Mermin N.D. (1976) Solid state physics. Saunders College Publishing, New York
9. Li W, Li D.Y. (2006) Influence of surface morphology on corrosion and electronic behavior. Acta Mater 54:445-452. doi:10.1016/j.actamat.2005.09.017
10. Ozawa R, Kaykham K, Hiraishi A., Suzuki Y, Mori N, Yaguchi T., Itoh J, Yamamoto S. (1999) Field emission from flat metal surfaces covered with Ba atoms. Appl Surf Sci 146:162-168. doi:10.1016/S0169-4332(99)00032-X
11. Kim JS, Cacialli F, Granstrom M., Friend RH, Johansson N, Salaneck WR, Daik R, Feast W.J. (1999) Characterisation of the properties of surface-treated indium-tin oxide thin films. Synth Met 101:111-112. doi:10.1016/S0379-6779(98) 01127-8
12. Bergveld P, Hendrikse J, Olthuis W. (1998) Theory and application of the material work function for chemical sensors based on the field effect principle. Meas Sci Technol 9:1801-1808. doi:10.1088/0957-0233/9/11/003
13. Nazarov A, Thierry D. (2007) Application of Volta potential mapping to determine metal surface defects. Electrochim Acta 52:7689-7696. doi:10.1016/j.electacta.2007.05.077
14. Apachitei I, Fratila-Apachitei LE, Duszczyk J. (2007) Microgal-vanic activity of an Mg-Al-Ca-based alloy studied by scanning Kelvin probe force microscopy. Scr Mater 57:1012-1015. doi:10.1016/j.scriptamat.2007.08.002
15. Cheran LE, Johnstone S, Sadeghi S., Thompson M. (2007) Work-function measurement by high-resolution scanning Kelvin nanoprobe. Meas Sci Technol 18:567-578. doi:10.1088/0957-0233/18/3/005
16. Schmutz P, Frankel G.S. (1998) Corrosion study of AA2024-T3 by scanning Kelvin probe force microscopy and in situ atomic force microscopy scratching. J Electrochem Soc 145:2295-2306. doi:10.1149/1.1838634
17. Bockris JOM, Reddy AKN (1998) Modern electrochemistry. Plenum Press, New York
18. Juzeliunas E, Sudavičius A, Jüttner K, Fürbeth W (2003) Study of initial stages of Al-Mg alloy corrosion in water, chloride and Cu(II) environment by a scanning Kelvin probe and XPS. Electrochem Commun 5:154-158. doi:10.1016/S1388-2481(03)00015-8
19. Williams G, Holness RJ, Worsley D.A., McMurray H.N. (2004) Inhibition of corrosion-driven organic coating delamination on zinc by polyaniline. Electrochem Commun 6:549-555. doi:10.1016/j.elecom.2004.04.004
20. Dubuisson E, Lavie P, Dalard F., Caire JP, Szunerits S. (2006) Study of the atmospheric corrosion of galvanised steel in a mi-crometric electrolytic droplet. Electrochem Commun 8:911-915. doi:10.1016/j.elecom.2006.03.024
21. Schütze M., Cahn RW, Haasen P, Kramer E.J. (2000) Corrosion and environmental degradation. Wiley-VCH, Weinheim
22. Kim JG, Kim YW, Kang M.C. (2002) Corrosion characteristics of rigid polyurethane thermally insulated pipeline with insulation defects. Corrosion 58:175-181. doi:10.5006/1.3277318
23. Nam ND, Kim J.G. (2010) Effect of niobium on the corrosion behaviour of low alloy steel in sulfuric acid solution. Corros Sci 52:3377-3384. doi:10.1016j.corsci.2010.06.010
24. Moretti G, Guidi F, Grion G. (2004) Tryptamine as a green iron corrosion inhibitor in 0.5 M deaerated sulphuric acid. Corros Sci 46:387-403. doi:10.1016/S0010-938X(03)00150-1
25. Cottis R, Turgoose S. (1999) Electrochemical impedance and noise. NACE International, Houston
26. 2 corrosion. EIS studies on the inhibition efficiency of benzimidazole. Electrochim Acta 48:845-854. doi:10.1016/S0013-4686(02)00776-4
27. Bentiss F, Lebrini M, Vezin H., Traisnel M, Lagrené M (2009) Enhanced corrosion resistance of carbon steel in normal sulfuric acid medium by some macrocyclic polyether compounds containing a 1, 3, 4-thiadiazole moiety: AC impedance and computational studies. Corros Sci 51:2165-2173. doi:10.1016/j.corsci.2009.05.049
28. Roberge PR (2000) Handbook of corrosion engineering. McGraw-Hill, New York
29. Flis J, Pickering HW, Osseo-Asare K (1998) Interpretation of impedance data for reinforcing steel in alkaline solution containing chlorides and acetates. Electrochim Acta 43:1921-1929. doi:10.1016/S0013-4686(97)10004-4
30. Kramer M, Tomkiewicz M. (1984) Porous electrodes. J Electro-chem Soc 131:1283-1288. doi:10.1149/1.2115807
31. Nyikos L, Pajkossy T. (1985) Fractal dimension and fractional power frequency-dependent impedance of blocking electrodes. Electro-chim Acta 30:1533-1540. doi:10.1016/0013-4686(85)80016-5
32. Jonse DA (1996) Principles and prevention of corrosion. Prentice-Hall, NJ
33. Pound BG, Abdurrahman MH, Glucina M.P., Wright GA, Sharp R.M. (1985) The corrosion of carbon steel and stainless steel in simulated geothermal media. Aust J Chem 38:1133-1140. doi:10.1071/CH9851133
34. Smoluchowski R (1941) Anisotropy of the electronic work function of metals. Phys Rev 60:661-674. doi:10.1103/PhysRev.60.661
35. Kim MJ, Jang YW, Yoo Y.H., Kim JJ, Kim J.G. (2010) Effect of specimen area on the corrosion rate of low alloy steel. J Korean Electrochem Soc 13:96-102. doi:10.5229/JKES.2010.13.2.096
36. Salvago G, Magagnin L, Bestetti M. (2002) Unified approach to localized and general corrosion of stainless steels. Electrochim Acta 47:1787-1793. doi:10.1016/S0013-4686(02)00014-2
37. Saito S, Takeda K, Soumura T., Tani T, Maeda T. (1994) Effects of surface roughness and patches on the work function of cobalt. Phys Status Solid A 142:K29-K32. doi:10.1002/pssa.2211420140
38. Lang ND, Kohn W. (1973) Surface-dipole barriers in simple metals. Phys Rev B 8:6010-6012. doi:10.1103/PhysRevB.8.6010
39. Błoński P, Kiejna A (2007) Structural, electronic, and magnetic properties of bcc iron surfaces. Surf Sci 601:123-133. doi:10.1016/j.susc.2006.09.013
40. Li W, Li D.Y. (2005) On the correlation between surface roughness and work function in copper. J Chem Phys 122:064708. doi:10.1063/1.1849135
41. Li W, Li D.Y. (2005) Effect of surface geometrical configurations induced by microcracks on the electron work function. Acta Mater 53:3871-3878. doi:10-1016/j.actamat.2005.04.042
42. Li W, Cai M, Zong Z., Yu S. (2006) Variation of surface morphology and electronic behavior under dynamic tensile conditions. Appl Phys Lett 88:181902. doi:10.1063/1.2193048