The rotating cylinder electrode for examining velocity-sensitive corrosion - A review

Corrosion

Volumn 60, Issue 11, 2004, Pages 1003-1023

  Silverman, D C ^a  

^a Argentum Solutions Inc   (United States)

Author keywords

Fluid flow; Impinging jet; Mass transfer; Pipes; Rotating cylinder electrode; Shear stress (fluid); Turbulence; Velocity

Indexed keywords

CYLINDERS (SHAPES); ELECTRODES; HYDRODYNAMICS; MASS TRANSFER; REYNOLDS NUMBER; SURFACE ROUGHNESS; TURBULENT FLOW;

SCHMIDT NUMBER; SHERWOOD NUMBER;

CORROSION;

CORROSION; CYLINDER; ELECTRODE; MASS TRANSFER; PIPE; TURBULENT FLOW;

EID: 10344254335     PISSN: 00109312     EISSN: None     Source Type: Journal    
DOI: 10.5006/1.3299215     Document Type: Review

References (123)

1. "State-of-the-Art Report on Controlled-Flow Laboratory Corrosion Tests," NACE Publication 5A195 (Houston, TX: NACE International, 1995).
2. D.R. Gabe, J. Appl. Electrochem. 4 (1974): p. 91.
3. D.R. Gabe, F.C. Walsh, J. Appl. Electrochem. 13 (1983): p. 3.
4. D.R. Gabe, G.D. Wilcox, J. Gonzalez-Garcia, F.C. Walsh, J. Appl. Electrochem. 28 (1998): p. 759.
5. H. Schlichting, Boundary Layer Theory (New York, NY: McGraw-Hill Book Co., 1979).
6. M. Eisenberg, C.W. Tobias, C.R. Wilke, J. Electrochem. Soc. 101, 6 (1954): p. 306.
7. T. Theodorsen, A. Regier, "Experiments on Drag of Revolving Disks, Cylinders, and Streamline Rods at High Speeds," Nat. Advisory Comm. Aeronaut., Report no. 793 (Washington, DC: U.S. Government Printing Office, 1945), p. 367.
8. T.H. Chilton, A.P. Colburn, Ind. Eng. Chem. 26 (1934): p. 1,183.
9. D.C. Silverman, Corrosion 59, 3 (2003): p. 207.
10. N.A. Darby, C.J. Newton, J.D.B. Sharman, Light Metals 1999, ed. C.E. Eckert (Warrendale, PA: The Minerals, Metals, and Materials Society, 1999), p. 87.
11. B. Morrison, K. Striebel, P.N. Ross, J. Electroanal. Chem. 215 (1986): p. 151.
12. M.Kh. Kishinevskii, T.S. Kornienko, Elektrokhim. 25, 6 (1989): p. 821.
13. D.R. Gabe, D.J. Robinson, Electrochim. Acta 17 (1972): p: 1,121.
14. D.J. Robinson, D.R. Gabe, Trans. Inst. Met. Finish. 48 (1970): p. 35.
15. A.J. Arvia, J.S.W. Carrozza, S.L. Marchiano, Electrochim. Acta 9 (1964): p. 1,483.
16. P.C. Singh, P. Mishra, Chem. Eng. Sci. 35 (1980): p. 1,657.
17. I. Cornet, R. Kappesser, Trans. Inst. Chem. Eng. 47 (1969): p. T194.
18. D.C. Silverman, unpublished results, Monsanto Corp. 1980. Details summarized in Table 1 and available at www.argentumsolutions.com.
19. A.C. Makrides, N. Hackerman, J. Electrochem. Soc. 105, 3 (1958): p. 156.
20. R. Kappesser, I. Cornet, R. Greif, J. Electrochem. Soc. 118, 12 (1971): p. 1,957.
21. P.A. Makanjuola, D.R. Gabe, Surf. Technol. 24 (1985): p. 29.
22. D.R. Gabe, F.C. Walsh, J. Appl. Electrochem. 14 (1984): p. 555.
23. D.R. Gabe, F.C. Walsh, J. Appl. Electrochem. 14 (1984): p. 565.
24. D.R. Gabe, P.A. Makanjuola, J. Appl. Electrochem. 17 (1987): p. 370.
25. F.S. Holland, Chem. Ind. (1978): p. 453.
26. B. Poulson, Corros. Sci. 30. 6/7 (1990): p. 743.
27. G.H. Sedahmed, K. Abdell, A.M. Abdallah, J. Appl. Electrochem. 9 (1979): p. 563.
28. D.C. Silverman, Corrosion 40, 5 (1984): p. 221.
29. D.C. Silverman, Corrosion 44, 1 (1988): p. 42.
30. D.C. Silverman, "Rotating Cylinder Electrode - An Approach for Predicting Velocity-Sensitive Corrosion," in Flow-Induced Corrosion: Fundamental Studies and Industrial Experience, eds. K.J. Kennelley, R.H. Hausier, D.C. Silverman (Houston, TX: NACE. 1991), Chapter 20.
31. S. Nešić, G.T. Solvi, S. Skjerve, Br. Corros. J. 32, 4 (1997): p. 269.
32. G. Wranglen, J. Berendson, G. Karlberg, "Apparatus for Electrochemical Studies of Corrosion Processes in Flowing Systems," in Physico-Chemical Hydrodynamics, ed. B. Spalding (London, U.K.: Adv. Publications, 1977), p. 461.
33. R.A. Holser, G. Prentice, R.B. Pond, Jr., R. Guanti, Corrosion 46, 9 (1990): p. 764.
34. T.Y. Chen, A.A. Moccari, D.D. Macdonald, Corrosion 48, 3 (1992): p. 239.
35. D.C. Silverman, Corrosion 55, 12 (1999): p. 1,115.
36. F.P. Berger, K.-F. Hau, Int. J. Heat Mass Transf. 20 (1977): p. 1,185.
37. T. Mizushina, F. Ogino, Y. Oka, H. Fukuda, Int. J. Heat Mass Transf. 14 (1971): p. 1,705.
38. C.S. Lin, E.B. Denton, H.S. Gaskill, G.L. Putnam, Ind. Eng. Chem. 43, 9 (1951): p. 2,136.
39. F.L. LaQue, H.R. Copson, Corrosion Resistance of Metals and Alloys, ACS Monograph Series no. 158 (New York, NY: Reinhold Publishing Corporation, 1963), p. 79.
40. S. Papavinasam, R.W. Revie, M. Attard, A. Demoz, K. Michaelian, Corrosion 59, 10 (2003): p. 897.
41. A.F.S. Afshar, D.R. Gabe, B. Sewell, J. Appl. Electrochem. 21 (1991): p. 32.
42. B. Poulson, R. Robinson, Int. J. Heat Transf. 31, 6 (1988): p. 1,289.
43. B. Poulson, Wear 233-235 (1999): p. 497.
44. R.H. Perry, D.W. Green, J.O. Maloney, eds., Perry's Chemical Engineers Handbook, 7th ed., Section 6 (New York, NY: McGraw-Hill, 1997), p. 6/3-6/23.
45. S.M. Chouikhi, M.A. Patrick, A.A. Wragg, J. Appl. Electrochem. 17 (1987): p. 1,118.
46. B. Poulson, R. Robinson, Corros, Sci. 26, 4 (1986): p. 265.
47. D.C. Silverman, M.E. Zerr, Corrosion 42, 11 (1986): p. 633.
48. B.K. Mahato, C.Y. Cha, L.W. Shemilt, Corros. Sci. 20 (1980): p. 421
49. E.F.C. Somerscales, Br. Corros. J. 34, 2 (1999): p. 109.
50. K.D. Efird, E.J. Wright, J.A. Boros, T.G. Hailey, Corrosion 49, 2 (1993): p. 993.
51. N. Nordsveen, S. Nešić, R. Nyborg, A. Strangeland, Corrosion 59, 5 (2003): p. 443.
52. F. Giralt, O. Trass, Can. J. Chem. Eng. 53 (1975): p. 505.
53. F. Giralt, O. Trass, Can. J. Chem. Eng. 54 (1976): p. 148.
54. Z.A. Foroulis, H.H. Uhlig, J. Electrochem. Soc, 111, 1 (1964): p. 13.
55. A.C. Makrides, J. Electrochem. Soc. 107, 11 (1960): p. 869.
56. B.T. Ellison, W.R. Schmeal, J. Electrochem. Soc. 125, 4 (1978): p. 524.
57. I. Cornet, E.A. Barrington, G.U. Behrsing, J. Electrochem. Soc. 108, 10 (1961): p. 947.
58. A.J. Arvia, J.S.W. Carrozza, Electrochim. Acta 7 (1962): p. 65.
59. J.M. Maciel, S.M.L. Agostinho, J. Appl. Electrochem. 30, 8 (2000): p. 981.
60. J.R. Kish, M.B. Ives, J.R. Rodda, J. Electrochem. Soc. 147, 10 (2000): p. 3,637.
61. F. Zucchi, G. Trabanelli, G. Brunoro, "Effect of Flow Velocity on Corrosion Inhibition of Steel in HCl," Prog. Understanding Prev. Corros. (Pap. Eur. Corros. Congr.), 10th, vol. 2 (1993), p. 845.
62. V.M. Salinas-Bravo, J.G. Ganzalez-Rodriguez, Rev. Metal. 33, 3 (1997): p. 182.
63. A.M.S. Abdennabi, A.I. Abdulhadi, S.T. Abu-Orabi, H. Saricimen, Corros. Sci. 38, 10 (1996): p. 1,791.
64. J. Carew, A. Al-Hashem, A. Al-Sayegh, "Flow Effects on the Corrosion Inhibition of Seawater Injection System," Proc. Corros. Prev. (Australasian Corrosion Association, 1998), p. 193.
65. F. Mansfeld, G. Liu, H. Xiao, C.H. Tsai, B.J. Little, Corros. Sci. 36, 12 (1994): p. 2,063.
66. R.J. Guanti, H.P. Hack, "Determination of the Best Hydrodynamic Parameter for Modeling Flow on Cathodically Polarized Surfaces," CORROSION/87, paper no. 267 (Houston, TX: NACE, 1987).
67. I. Cornet, R. Greff, F. Roehler, Heat Mass Transfer Metall. Syst. (Semin. Int. Cent. Heat Mass Transfer) (Washington, DC: Hemisphere, 1981), p. 721.
68. M.A.C. De Castro, B.E. Wilde, Corrosion 35, 12 (1979): p. 560.
69. F. Mansfeld, Corrosion 32, 9 (1976): p. 380.
70. P.V. Scheers, R. Mintek, J.S. Afr. Inst. Min. Metall. 92, 10 (1992): p. 275.
71. J.H. Kim, I.S. Kim, H.S. Chung, Can. Metall. Q. 42, 2 (2003): p. 253.
72. J.H. Kim, I.S. Kim, J. Korean Nucl. Soc. 32, 6 (2000): p. 595.
73. S. Giddey, B. Cherry, F. Lawson, M. Forsyth, Corros. Sci. 43, 8 (2001): p. 1, 497.
74. G.E. Englert, I.L. Muller, M.I. Da Costa, Jr., "Electrochemical Evaluation of Low-Carbon Steel in Wastewater Anaerobic Media," Proc. Electrochem. Soc. 97-26, Passivity and Breakdown (1998), p. 462.
75. D.C. Silverman, Corrosion 46, 7 (1990): p. 589.
76. D.C. Silverman, Electrochim. Acta 38, 14 (1993): p. 2,075.
77. S. Giddey, Y. Lu, Zheng, S. Cook, D.F. Koch, "Corrosion of Mild Steel in Turbulent Caustic Solution," Proc. 13th Int. Corros. Congr, paper no. 195/1-195/6 (Clayton, Australia: Australasian Corrosion Association, 1996).
78. Q. Lu, M.M. Stack, C.R. Wiseman, Mater. Corros. 51, 10 (2000): p. 705.
79. D.G. Kohlman, S.R. Taylor, Corrosion 49, 8 (1993): p. 622.
80. D.G. Kohlman, S.R. Taylor, Corrosion 49, 8 (1993): p. 635.
81. N.U. Obeyesekere, A.R. Naraghi, J.S. McMurray, "Synthesis and Evaluation of Biopolymers as Environmentally Friendly Corrosion Inhibitors," Abstr. Pap. Am. Chem. Soc., 221st Meeting (2001), p. 198.
82. 2 Corrosion of Cabon Steel," 9th Eur. Symp. Corrosion Inhibitors, vol. 2 (Ann. Univ. Ferrara, Sez., 5 Suppl., 2000), p. 1,013.
83. V. Jovancicevic, S. Ramchandran, P. Prince, Corrosion 55, 5 (1999): p. 449.
84. P. Altoe, G. Pimenta, C.F. Moulin, S.L. Diaz, O.R. Mattos, Electrochim. Acta 41, 7/8 (1996): p. 1,165.
85. J.A. Dougherty, D.W. Stegmann, Mater. Perform. 35, 4 (1996): p. 47.
86. K. Denpo, H. Ogawa, Corrosion 49, 6 (1993): p. 442.
87. G. Rubenis, D.F.A. Koch, S. Giddey, "The Evaluation of Acid Inhibitors Under Controlled Hydrodynamic Conditions," Proc. 13th Int. Corros. Congr. (Australia: Australasian Corrosion Congress, 1996), p. 351/1-351/7.
88. A. Frignani, G. Trabanelli, C. Wrubl, A. Mollica, Corrosion 52, 3 (1996): p. 177.
89. D.C. Silverman, D.J. Kalota, F.S. Stover, Corrosion 51, 11 (1995): p. 818.
90. D.J. Kalota, D.C. Silverman, Corrosion 50, 2 (1994): p. 138.
91. Yu.I. Kuznetzov, I.A. Valuev, Zashch. Met. 23, 1 (1987): p. 138.
92. G. Kar, T.W. Healy, D.W. Fuerstenau, Corros. Sci. 13, 5 (1973): p. 365.
93. H.-H. Huang, T.-H. Chuang, Mater. Sci. Eng. A, A292, 1 (2000): p. 90.
94. H.W. Wang, M.M. Stack, Surf. Coat. Technol. 105, 1-2 (1998): p. 141.
95. P. Novak, A. Macenauer, Corros. Sci. 35, 1-4 (1993): p. 635.
96. H.W. Wang, M.M. Stack, J. Mater. Sci. 35, 21 (2000): p. 5,263.
97. S. Zhou, M.M. Stack, R.C. Newman, Corrosion 52, 12 (1996): p. 934.
98. S. Zhou, M.M. Stack, R.C. Newman, Corros. Sci. 38, 7 (1996): p. 1,071.
99. S. Nešić, J. Bienkowski, K. Bremhorst, K.-S. Yang, Corrosion 56, 10 (2000): p. 1,005.
100. K.-S. Yang, J.-Y. Hwang, K. Bremhorst, S. Nešić, Can. J. Chem. Eng. 81 (2003): p. 26.
101. F. Mansfeld, M.W. Kendig, S. Tsai, Corros. Sci. 22, 5 (1982): p. 455.
102. Z.A. Foroulis, Corrosion 35, 8 (1979): p. 340.
103. H.P. Hack, R.J. Guanti, Mater. Perform. 28, 3 (1989): p. 29.
104. I. Cornet, R. Kappesser, Trans. Inst. Chem. Eng. 47 (1969): p. T194.
105. B. Einar, Corros. Sci. 9, 12 (1969): p. 887.
106. N. Pavel, V. Kucera, G. Tor, "The Effect of Flow Rate and Abrasion on the Efficiency of Anodic Protection of Stainless Steel in Sulfuric Acid," Proc. 10th Scand. Corros. Congr. (Stockholm, Sweden: Swed. Corros. Inst. 1986).
107. V.S. Pakhomov, A.S. Abramov, A.V. Chekhovskii, Zashch. Met. 23, 4 (1987): p. 722.
108. B.E. Brown, H.H. Lu, D.J. Duquette, Corrosion 48, 12 (1992): p. 970.
109. K. S. Ramp, C.C. Lin, G. Romeo, R.M. Kruger, Y.J. Kim, "ECP Prediction in the BWR Circuit," Proc. Symp. on Plant Aging and Life Prediction in Corrodible Structures (Houston, TX: NACE, 1997), p. 759.
110. R. Katsura, S. Nishimura, "Evaluation of the Flow Rate Effect on the Corrosion Potential of Stainless Steel in High-Temperature Water Using a Rotating Electrode System," Proc. Symp. on Plant Aging and Life Prediction in Corrodible Structures (Houston, TX: NACE, 1997), p. 389.
111. C.C. Lin, Y.J. Kim, L.W. Niedrach, K.S. Ramp, Corrosion 52, 8 (1996): p. 618.
112. Y.J. Kim, C.C. Lin, R. Pathania, Water Chem. Nucl. React. Syst. 6, 1 (1992): p. 139.
113. J.H. Kim, I.S. Kim, Mater. Corros. 54, 1 (2003): p. 23.
114. G.H. Sedahmed, B.A. Abd El-Naby, A. Abdel-Khali, Corros. Sci. 17 (1977): p. 865.
115. D.C. Silverman, "Corrosion Prediction from Circuit Models - Application to Evaluation of Corrosion Inhibitors," in Electro-chemical Impedance - Analysis and Interpretaion, ASTM STP 1188, eds. J.R. Scully, D.C. Silverman, M.W. Kendig (West Conshohocken, PA: ASTM International, 1993), p. 192.
116. A.M. El Din, El Din Shams, A.M.K. Tag, E.A. El Sum, Metaux-Corros.-Ind. 63, 752 (1988): p. 123.
117. J. Postlethwaite, S. Nešić, "Erosion-Corrosion in Single and Multiphase Flow," in Uhlig's Corrosion Handbook, 2nd ed., ed. R.W. Revie (New York, NY: John Wiley & Sons, 2000), Chapter 15.
118. C.M. Preece, "Cavitation Erosion," in Treatise on Materials Science and Technology, ed. C.M. Preece, vol. 16 (New York, NY: Academic Press, 1979). p. 252ff.
119. I.M.J. Hutchings, J. Microsc. 130, Pt 3 (1983): p. 331.
120. A.G. Petersen, D. Klenerman, W.M. Hedges, Corrosion 60, 2 (2004): p. 187.
121. A.G. Parshin, V.S. Pakhomov, Ya.M. Kolotyrkin, Corros. Sci. 22, 9 (1982): p. 845.
122. S.H. Alwash, V. Ashworth, M. Shirkhanzadeh, G.E. Thompson, Corros. Sci. 27, 12 (1987): p. 1,301.
123. S. Nešić, F. Carroll, Corrosion 59, 12 (2003): p. 1,085.