A novel pneumatic micropipette aspiration method using a balance pressure model

Review of Scientific Instruments

Volumn 84, Issue 12, 2013, Pages

  Zhao, Qili ^a   Wu, Ming ^a   Cui, Maosheng ^b   Qin, Yanding ^a   Yu, Jin ^a   Sun, Mingzhu ^a   Zhao, Xin ^a   Feng, Xizeng ^a  

^a NANKAI UNIVERSITY   (China)

^b Tianjin Institute of Animal Science   (China)

Author keywords

[No Author keywords available]

Indexed keywords

CAPILLARY EFFECTS; DIFFERENT SIZES; MICRO-INJECTION; MICRO-PIPETTE; MICROPIPETTE ASPIRATION; PRESSURE MODELING;

CELL MEMBRANES; ELASTICITY; PNEUMATICS;

CYTOLOGY;

ANIMAL; ARTICLE; CYTOLOGY; EQUIPMENT; FEASIBILITY STUDY; NEURAL STEM CELL; PRESSURE; RAT; SUCTION; THEORETICAL MODEL; YOUNG MODULUS;

ANIMALS; ELASTIC MODULUS; FEASIBILITY STUDIES; MODELS, THEORETICAL; NEURAL STEM CELLS; PRESSURE; RATS; SUCTION;

EID: 84891720216     PISSN: 00346748     EISSN: 10897623     Source Type: Journal    
DOI: 10.1063/1.4832979     Document Type: Conference Paper

References (53)

1. Y. B. Lu, K. Franze, G. Seifert, C. Steinhauser, F. Kirchhoff, H. Wolburg, J. Guck, P. Janmey, E. Q. Wei, J. Kas, and A. Reichenbach, Proc. Natl. Acad. Sci. U.S.A. 103, 17759 (2006). 10.1073/pnas.0606150103
2. S. Suresh, J. Spatz, J. P. Mills, A. Micoulet, M. Dao, C. T. Lim, M. Beil, and T. Seufferlein, Acta Biomater. 1, 15 (2005). 10.1016/j.actbio.2004.09. 001
3. D.-H. Kim, P. K. Wong, J. Park, A. Levchenko, and Y. Sun, Annu. Rev. Biomed. Eng. 11, 203 (2009). 10.1146/annurev-bioeng-061008-124915
4. G. Bao and S. Suresh, Nature Mater. 2, 715 (2003). 10.1038/nmat1001
5. C. T. Lim, E. H. Zhou, A. Li, S. R. K. Vedula, and H. X. Fu, Mater. Sci. Eng., C 26, 1278 (2006). 10.1016/j.msec.2005.08.022
6. S. Fukuda, T. Uchihashi, R. Iino, Y. Okazaki, M. Yoshida, Rev. Sci. Instrum. 84, 073706 (2013). 10.1063/1.4813280
7. N. Kol, M. Gladnikoff, D. Barlam, R. Z. Shneck, A. Rein, and I. Rousso, Biophys. J. 91, 767 (2006). 10.1529/biophysj.105.079657
8. S. Suresh, Acta Biomater. 3, 413 (2007). 10.1016/j.actbio.2007.04.002
9. E. M. Darling, S. Zauscher, J. A. Block, and F. Guilak, Biophys. J. 92, 1784 (2007). 10.1529/biophysj.106.083097
10. E. C. Faria, N. Ma, E. Gazi, P. Gardner, M. Brown, N. W. Clarke, and R. D. Snook, Analyst 133, 1498 (2008). 10.1039/b803355b
11. S. E. Cross, Y. S. Jin, J. Y. Rao, and J. K. Gimzewski, Nat. Nanotechnol. 2, 780 (2007). 10.1038/nnano.2007.388
12. Y. Zhang, Y. Fang, J. Yu, and X. Dong, Rev. Sci. Instrum. 82, 056103 (2011). 10.1063/1.3592598
13. J. E. Sader, J. W. M. Chon, and P. Mulvaney, Rev. Sci. Instrum. 70, 3967 (1999). 10.1063/1.1150021
14. L. M. Rebelo, J. S. de Sousa, F. J. Mendes, Nanotechnology 24, 055102 (2013). 10.1088/0957-4484/24/5/055102
15. C. P. Green, H. Lioe, J. P. Cleveland, R. Proksch, P. Mulvaney, Rev. Sci. Instrum. 75, 1988 (2004). 10.1063/1.1753100
16. S. S. An, B. Fabry, X. Trepat, N. Wang, and J. J. Fredberg, Am. J. Respir. Cell Mol. Biol. 35, 55 (2006). 10.1165/rcmb.2005-0453OC
17. B. Fabry, G. Maksym, J. Butler, M. Glogauer, D. Navajas, and J. Fredberg, Phys. Rev. Lett. 87, 148102 (2001). 10.1103/PhysRevLett.87.148102
18. A. R. Bausch, W. Moller, and E. Sackmann, Biophys. J. 76, 573 (1999). 10.1016/S0006-3495(99)77225-5
19. P. Kollmannsberger and B. Fabry, Rev. Sci. Instrum. 78, 114301 (2007). 10.1063/1.2804771
20. M. Fischer, A. C. Richardson, S. Nader, S. Reihani, L. B. Oddershede, and K. Berg-Sørensen, Rev. Sci. Instrum. 81, 015103 (2010). 10.1063/1.3280222
21. J. P. Mills, L. Qie, M. Dao, C. T. Lim, and S. Suresh, Mech. Chem. Biosyst. 1, 169 (2004).
22. Y. Tan, D. Sun, J. Wang, and W. Huang, IEEE Trans. Biomed. Eng. 57, 1816 (2010). 10.1109/TBME.2010.2042448
23. P. L. Biancaniello and J. C. Crocker, Rev. Sci. Instrum. 77, 113702 (2006). 10.1063/1.2387893
24. G. Y. H. Lee and C. T. Lim, Trends Biotechnol. 25, 111 (2007). 10.1016/j.tibtech.2007.01.005
25. J. Guck, R. Ananthakrishnan, H. Mahmood, T. J. Moon, C. C. Cunningham, and J. Kas, Biophys. J. 81, 767 (2001). 10.1016/S0006-3495(01)75740-2
26. B. Daily and E. L. Elson, Biophys. J. 45, 671 (1984). 10.1016/S0006-3495(84)84209-5
27. W. B. McConnaughey and N. O. Petersen, Rev. Sci. Instrum. 51, 575 (1980). 10.1063/1.1136256
28. S. Yang and T. Saif, Rev. Sci. Instrum. 76, 044301 (2005). 10.1063/1.1863792
29. R. M. Hochmuth, J. Biomech. 33, 15 (2000). 10.1016/S0021-9290(99)00175-X
30. E. Evans and A. Yeung, Biophys. J. 56, 151 (1989). 10.1016/S0006-3495(89) 82660-8
31. K. Guevorkian, M. Colbert, M. Durth, S. Dufour, and F. Brochard-Wyart, Phys. Rev. Lett. 104, 218101 (2010). 10.1103/PhysRevLett.104.218101
32. F. K. Glenister, R. L. Coppel, A. F. Cowman, N. Mohands, and B. M. Cooke, Blood 99, 1060 (2002). 10.1182/blood.V99.3.1060
33. E. Shojaei-Baghini, Y. Zheng, and Y. Sun, Ann. Biomed. Eng. 41, 1208 (2013). 10.1007/s10439-013-0791-9
34. M. Khalilian, M. Navidbakhsh, M. R. Valojerdi, M. Chizari, and P. E. Yazdi, J. R. Soc., Interface 7, 687 (2010). 10.1098/rsif.2009.0380
35. Y. L. Wang, M. Z. Sun, X. Zhao, and B. Q. Zhao, Proceedings of IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, Xi'an, 2012, pp. 65-70.
36. Q. L. Zhao, X. Zhao, Y. L. Wang, M. Z. Sun, M. S. Cui, J. Z. Feng, and G. Z. Lu, J. Control Eng. Chin. 19, 389 (2012). 10.3969/j.issn.1671-7848.2012.03. 007
37. Q. L. Zhao, M. S. Cui, X. Zhao, M. Z. Sun, Y. L. Wang, and J. Z. Feng, Proceedings of Chinese Control Conference, Yantai, 2011, pp. 4089-4094.
38. A. L. Zhang, M. Wu, X. Zhao, and X. Z. Feng, " Coating method of micro pattern based on microscopic injection system.," Proc. IEEE (in press).
39. M. Yoshida, H. Imura, Y. Murayama, I. Sakuma, T. Tuji, and S. Omata, Biol. Reprod. 66, 518 (2000).
40. Y. Sun, K. T. Wan, K. P. Roberts, J. C. Bischof, and B. J. Nelson, IEEE Trans. Nanobiosci. 2, 279 (2003). 10.1109/TNB.2003.820273
41. Y. Tan, D. Sun, W. Huang, and S. H. Cheng, IEEE Trans. Nanobiosci. 9, 171 (2010). 10.1109/TNB.2010.2050598
42. M. Sato, D. P. Theret, N. Ohshima, R. M. Nerem, and L. T. Wheeler, J. Biomech. Eng. 112, 263 (1990). 10.1115/1.2891183
43. L. G. Alexopoulos, L. A. Setton, and F. Guilak, Acta Biomater. 1, 317 (2005). 10.1016/j.actbio.2005.02.001
44. D. P. Theret, M. J. Levesque, M. Sato, R. M. Nerem, and L. T. Wheeler, Trans. ASME 110, 190 (1988). 10.1115/1.3108430
45. W. R. Jones, H. P. Ting-Beall, G. M. Lee, S. S. Kelley, R. M. Hochmuth, and F. Guilak, J. Biomech. 32, 119 (1999). 10.1016/S0021-9290(98)00166-3
46. E. Drobnis, J. Andrew, and D. Katz, J. Exp. Zool. 245, 206 (1988). 10.1002/jez.1402450210
47. Y. Murayama, J. Mizuno, H. Kamakura, Hum. Cell 19, 119 (2006). 10.1111/j.1749-0774.2006.00019.x
48. S. S. Lu, L. F. Song, W. Z. Teng, L. F. Yang, and K. H. Lu, J. Sci. Agric. Sin. 40, 1573 (2007).
49. J. Y. Shao and J. Xu, J. Biomech. Eng. 124, 388 (2002). 10.1115/1.1486469
50. X. Yin, Y. Piao, Q. Liu, G. B. Suo, and Y. Luo, J. Coll. Phys. 27, 60 (2008).
51. R. F. Moghaddam and M. Cheriet, Pattern Recogn. 45, 2419 (2012). 10.1016/j.patcog.2011.12.013
52. X. Y. Liu, Z. Lu, and Y. Sun, IEEE/ASME Trans. Mechatron. 16, 918 (2011). 10.1109/TMECH.2010.2056380
53. H. B. Huang, D. Sun, J. K. Mills, and S. H. Cheng, IEEE Trans. Rob. 25, 727 (2009). 10.1109/TRO.2009.2017109