Data cleaning for RFID and WSN integration

IEEE Transactions on Industrial Informatics

Volumn 10, Issue 1, 2014, Pages 408-418

  Wang, Li ^a   Xu, Li Da ^b,c   Bi, Zhuming ^d   Xu, Yingcheng ^e  

^a BEIHANG UNIVERSITY   (China)

^b SHANGHAI JIAO TONG UNIVERSITY   (China)

^c OLD DOMINION UNIVERSITY   (United States)

^d INDIANA UNIVERSITY PURDUE UNIVERSITY FORT WAYNE   (United States)

^e CHINA NATIONAL INSTITUTE OF STANDARDIZATION   (China)

Author keywords

Data cleaning; enterprise information system (EIS); industrial informatics; networks; radio frequency identification (RFID); system architecture; system integration; wireless sensor network (WSN)

Indexed keywords

DATA CLEANING; ENTERPRISE INFORMATION SYSTEM; INDUSTRIAL INFORMATICS; SYSTEM ARCHITECTURES; SYSTEM INTEGRATION;

ALGORITHMS; ENERGY UTILIZATION; INFORMATION SYSTEMS; MANUFACTURE; NETWORK ARCHITECTURE; NETWORKS (CIRCUITS); RADIO FREQUENCY IDENTIFICATION (RFID); TIME DELAY;

WIRELESS SENSOR NETWORKS;

EID: 84890916579     PISSN: 15513203     EISSN: None     Source Type: Journal    
DOI: 10.1109/TII.2013.2250510     Document Type: Article

References (79)

1. Z. M. Bi, S. Y. T. Lang, W. M. Shen, and L.Wang, "Reconfigurable manufacturing systems: The state of the art," Int. J. Production Res., vol. 46, no. 4, pp. 967-992, 2008 (Pubitemid 350136927)
2. L. D. Xu, "Enterprise systems: State-of-the-art and future trends," IEEE Trans. Ind. Inf., vol. 7, no. 4, pp. 630-640, Nov. 2011
3. Z. M. Bi and B. Kang, "Sensing and responding to the changes of geometric surfaces in reconfigurable manufacturing and assembly," Enterprise Inf. Syst., 2012, DOI: 10.1080/17517575.2012.654826
4. Z.M. Bi and L.Wang, "Energy modeling of machine tool for optimization of machine setup," IEEE Trans. Autom. Sci. Eng., vol. 9, no. 3, pp. 607-613, Jul. 2012
5. Z. M. Bi and B. Kang, "Reconfigurable parallel kinematic machines with an adjustable platform for higher adaptability," ASME J. Manuf. Sci. Eng., vol. 132, no. 6, 2010, Art. ID 061016
6. F. Jammes and H. Smit, "Service-oriented paradigms in industrial automation," IEEE Trans. Ind. Inf., vol. 1, no. 1, pp. 62-70, Feb. 2005 (Pubitemid 40541397)
7. Z. M. Bi and L.Wang, "Visualisation and verification of communication protocols for networked distributed systems," in Enterprise Networks and Logistics for Agile Manufacturing, L. Wang and S. C. L. Koh, Eds. Berlin, Germany: Springer, 2010
8. Z. M. Bi, "Revisit system architecture for sustainable manufacturing," J. Sustainability, vol. 3, no. 9, pp. 1323-1340, 2011
9. Z. M. Bi and W. J. Zhang, "Modularity technology in manufacturing: Taxonomy and issues," Int. J. Adv. Manuf. Technol., vol. 18, no. 5, pp. 381-390, 2001 (Pubitemid 32914693)
10. A. Bratukhin and T. Sauter, "Functional analysis of manufacturing execution system distribution," IEEE Trans. Ind. Inf., vol. 7, no. 4, pp. 740-749, Nov. 2011
11. C. Zhang and Y. Fan, "Complex event processing in enterprise information systems based on RFID," Enterprise Inf. Syst., vol. 1, no. 1, pp. 2-23, 2007
12. A. Bonivento, C. Fischione, L. Necchi, F. Pianegiani, and A. Sangiovanni- Vincentelli, "System level design for clustered wireless sensor networks," IEEE Trans. Ind. Inf., vol. 3, no. 3, pp. 202-214, Aug. 2007
13. S. Vitturi, I. Carreras, D. Mirorandi, L. Schenato, and A. Sona, "Experimental evaluation of an industrial application layer protocol over wireless systems," IEEE Trans. Ind. Inf., vol. 3, no. 4, pp. 275-287, Nov. 2007
14. A. Koubaa, R. Severino, R. M. Alves, and E. Tovar, "Improving quality-of-service in wireless sensor networks by mitigating 'hidden-node' collisions," IEEE Trans. Ind. Inf., vol. 5, no. 3, pp. 299-313, Aug. 2009
15. J. Ploennings,V.Vasyutynskyk, and K.Kabitzsch, "Comparative study of energy efficient sampling approaches forwireless control networks," IEEE Trans. Ind. Inf., vol. 6, no. 3, pp. 416-424, Aug. 2010
16. J. Vales-Alonso, V. Bueno-Delgado, E. Egea-Lopez, F. J. Gonzalez- Castano, and J. Alcaraz, "Multiframe maximum-likelihood tag estimation for RFID anticollision prorocols," IEEE Trans. Ind. Inf., vol. 7, no. 3, pp. 487-496, Aug. 2011
17. "Embedded WiSeNts consortium," Embedded WiSeNts Research Roadmap, (deliverable 3.3)
18. [Online]. Available: http://www.embedded- wisenets.org
19. R. Moraes, F. Vasques, P. Portugal, and J. A. Fonseca, "VTP-CSMA: A virtual token passing approach for real-time communication in IEEE 802.11 wireless networks," IEEE Trans. Ind. Inf., vol. 3, no. 3, pp. 215-224, Aug. 2007 (Pubitemid 47237096)
20. G. Anastasi, M. Conti, and M. D. Francesco, "A comprehensive analysis of the MAC unreliability problem in IEEE 802.15.4 wireless sensor networks," IEEE Trans. Ind. Inf., vol. 7, no. 1, pp. 52-64, Feb. 2011
21. A. K. bashir, S.-J. Lim, C. S. Hussain, and M.-S. Park, "Energy efficient in-network RFID data filtering scheme in wireless sensor networks," Sensors, vol. 11, pp. 7004-7021, 2011
22. C. Hsu, D. M. Levermore, C. Carothers, and G. Babin, "Enterprise collaboration: On-demand information exchange using enterprise databases, wireless sensor networks, and RFID systems," IEEE Trans. Syst., Man, Cybern. A, Syst. Humans, vol. 37, no. 4, pp. 519-532, Apr. 2007 (Pubitemid 47018766)
23. Y.-I. Kim, B. Yi, J. Song, J. Shin, and J. Lee, "Implementing a prototype system for power facility management using RFID/WSN," Int. J. Appl. Math. Comput. Sci., vol. 2, no. 2, pp. 70-75, 2006
24. W. Wang, J. Sung, and D. Kim, "Complex event processing in EPC sensor network middleware for both RFID and WSN," in Proc. 11th IEEE Symp. Object Oriented Real-Time Distrib. Computing, 2008, pp. 165-169
25. J.-F. Zeng, R. Li, J. Luo, and Y. Liu, "SOA-based RFID public services infrastructure: Architecture and its core services," J. Syst. Eng. Electron., vol. 20, no. 3, pp. 577-582, 2009
26. T. C. Poon, K. L. Choy, and H. K. H. Chowa, "A RFID case-based logistics resource management system for managing order-picking operations in warehouses," Expert Syst. Applic., vol. 36, pp. 8277-8301, 2009
27. J. Zhu and N. Sun, "Research on integration of WSN and RFID technology for agricultural product inspection," Amer. J. Eng. Technol. Res,, vol. 11, no. 9, pp. 2299-2305, 2011
28. T.-H. Shin, S. Chin, S.-W. Yoon, and S.-W. Kwon, "A service-oriented integrated information framework for RFID/WSN-based intelligent construction supply chain management," Autom. Construction, vol. 20, pp. 706-715, 2011
29. P. Garcia-Ansola, A. Garcia, and J. de lasMorenas, "ZigID: Improving visibility in industrial environments by combiningWSN and RFID," J. Zhejiang Univ. Sci. A Appl. Phys. Eng., vol. 12, no. 11, pp. 849-859, 2011
30. H. Liu, M. Bolic, A. Nayak, and I. Stojmenovic, "Taxonomy and challenges of the integration of RFIDand wireless sensors networks," IEEE Network, vol. 22, no. 6, pp. 26-32, 2008
31. T. S. Lopez, D. Kim, G. H. Canepa, and K. Koumad, "Integrating wireless sensors and RFID tags into energy-efficient and dynamic context networks," Computer J., vol. 52, no. 2, pp. 240-267, 2009
32. J. Cho, Y. Shim, T. Kwon, Y. Choi, S. Pack, and S. Kim, "SARIF: A novel framework for integrating wireless sensor and RFID networks," IEEE Wireless Commun., vol. 14, no. 6, pp. 50-56, Jun. 2007 (Pubitemid 350281214)
33. S. Lee, B. Kim, H. Kim, R. Ha, and H. Cha, "Inertial sensor-based indoor pedestrian localization with minimum 802.15.4a configuration," IEEE Trans. Ind. Inf., vol. 7, no. 3, pp. 455-465, Aug. 2012
34. S. Li, X. Wang, and D. Zhang, "Node localization in wireless sensor network based on self-organizing isometric embedding," Enterprise Inf. Syst., vol. 2, no. 3, pp. 259-273, 2008
35. S. Li, X. Wang, and D. Zhang, "An adaptive distributed localization in wireless sensor network," Enterprise Inf. Syst., vol. 3, no. 2, pp. 115-132, 2009
36. Y.-H. Chen, S.-J. Horng, R.-S. Run, J.-L. Lai, R.-J. Chen,W.-C. Chen, Y. Pan, and T. Takao, "A novel anti-collision algorithm in RFID systems for identifying passive tags," IEEE Trans. Ind. Inf., vol. 6, no. 1, pp. 105-121, 2011
37. L. Palopoli, E. Passerone, and T. Rizano, "Scalable offline optimization of industrial wireless sensor networks," IEEE Trans. Ind. Inf., vol. 7, no. 2, pp. 328-339, 2011
38. H. Ning, H. Liu, J. Mao, and Y. Zhang, "Scalable and distributed key array authentication protocol in radio frequency identification-based sensor systems," IET Commun., vol. 5, no. 12, pp. 1755-1768, 2011
39. L. Zhang and Z. Wang, "Integration of RFID into wireless sensor networks: Architectures, opportunities and challenging problems," in Proc. 5th Int. Conf. Grid Cooperative Computing Workshops, Hunan, China, Oct. 2006, pp. 463-469
40. J. Heo, J. Hong, and Y. Cho, "EARQ: Energy aware routing for real-time and reliable communication in wireless industrial sensor networks," IEEE Trans. Ind. Inf., vol. 5, no. 1, pp. 3-11, Feb. 2009
41. J. Haase, J.M. Molina, andD.Dietrich, "Power-aware system design of wireless sensor networks: Power estimation and power profiling strategies," IEEE Trans. Ind. Inf., vol. 7, no. 4, pp. 601-613, Nov. 2011
42. G. Vannucci, A. Bletsas, and D. Leigh, "A software-defined radio system for backscatter sensor networks," IEEE Trans. Wireless Commun., vol. 7, no. 6, pp. 2170-2179, Jun. 2008
43. Z. Zou, D. S. Mendoza, P. Wang, Q. Zhou, J. Mao, F. Jonsson, H. Tenhunen, and L.-R. Zheng, "A low-power and flexible energy detection IR-UWB receiver for RFID and wireless sensor networks," IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 58, no. 7, pp. 1470-1482, Jul. 2011
44. L. L. Bello and E. Toscano, "Coexistence issues of multiple co-located IEEE 802.15.4/zigbee network running on adjacent radio channels in industrial environment," IEEE Trans. Ind. Inf., vol. 5, no. 2, pp. 157-167, May 2009
45. G. Gamba, F. Tramarin, and A.Willing, "Retransmission strategies for cyclic polling over wireless channels in the presence of interference," IEEE Trans. Ind. Inf., vol. 6, no. 3, pp. 405-415, Aug. 2010
46. A. K. Bashir, S.-J. Lim, C. S. Hussain, and M.-S. Park, "Energy efficient in-network RFID data filtering scheme in wireless sensor networks," Sensors, vol. 11, pp. 7004-4021, 2011
47. R. Jeffrey, G. Alonso, M. Franklin, W. Hong, and J. Widom, "A pipelined framework for on line cleaning of sensor data streams," in Proc. IEEE Comput. Soc. Atlanta, 2006, pp. 140-142
48. R. Jeffery, M. Garofalakis, and M. J. Franklin, "Adaptive cleaning for RFID data streams," in Proc VLDB, Seoul, Korea, 2006, pp. 163-174
49. A. D. Sarma, S. R. Jeffery, M. J. Franklin, and J. Widom, Estimating Data Stream Quality for Object-Detection Applications. Berkeley, CA, USA: Univ. of California, 2005
50. B. Carbunar, M. Ramanathan, M. Koyuturk, C. Hoffmann, and A. Grama, "Redundant reader elimination in RFID systems," Sensor Ad Hoc Commun. Networks, pp. 176-184, 2005 (Pubitemid 44910425)
51. N. Khoussainova, M. Balazinska, and D. Suciu, "Towards correcting input data errors probabilistically using integrity constraints," in Proc. MobiDE, Chicago, IL, USA, 2006, pp. 43-50 (Pubitemid 44729442)
52. S. R. Jeffery, M. J. Franklin, and M. N. Garofalakis, "An adaptive RFID middleware for supporting metaphysical data independence," in Proc. Very Large Database, Auckland, New Zealand, 2008, pp. 265-289
53. B. Kochar and R. S. Chhillar, "Effective data warehousing system for RFID using novel data cleaning," A Data Transformation Loading Tech. 2011
54. W. Pan, Z. Li, Y. Nie, and Q. Chen, "An effective redundancy data cleaning technology in multi-data sources based on RFID network," J. Northwestern Polytechnic Univ., vol. 29, no. 3, pp. 435-442, 2011
55. [Online]. Available: http://www.ccis2k.org/iajit/PDF/vol.9,no.3/ 1910-2.pdf
56. L. Li, R. Ge, S. Zhou, and R. Valerdi, "Guest editorial: Integrated healthcare information systems," IEEE Trans. Inf. Technol. Biomed., vol. 16, no. 4, pp. 515-517, Oct. 2012
57. Y. Yin, Y. Fan, and L. Xu, "EMG and EPP-integrated human-machine interface between the paralyzed and rehabilitation exoskeleton," IEEE Trans. Inf. Technol. Biomed., vol. 16, no. 4, pp. 542-549, Oct. 2012
58. K. Xie, G. Chen, Q. Wu, Y. Liu, and P. Wang, "Research on the group decision-making about emergency event based on network technology," Inf. Technol. Management, vol. 12, no. 2, pp. 137-147, 2012
59. K. Xie, J. Liu, G. Chen, P. Wang, and S. Chaudhry, "Group decisionmaking in an unconventional emergency situation using agile Delphi approach," Inf. Technol. Management, vol. 13, no. 4, pp. 351-361, 2012
60. S. Shan, L. Wang, and L. Li, "Modeling of emergency response decision- making process using stochastic Petri net: An e-service perspective," Inf. Technol. Management, vol. 13, no. 4, pp. 363-376, 2012
61. S. Shan, L. Wang, L. Li, and Y. Chen, "An emergency response decision support system framework for application in e-government," Inf. Technol. Management, vol. 13, no. 4, pp. 411-427, 2012
62. Z. Zhou, R. Valerdi, and S. Zhou, "Guest editorial special section on enterprise systems," IEEE Trans. Ind. Inf., vol. 8, no. 3, p. 630, Aug. 2012
63. N. Niu, M. Jin, and J. Cheng, "A case study of exploiting enterprise resource planning requirements," Enterprise Inf. Syst., vol. 5, no. 2, pp. 183-206, 2011
64. W. Viriyasitavat, L. Xu, and A. Martin, "SWSpec: The requirements specification language in service workflow environments," IEEE Trans. Ind. Inf., vol. 8, no. 3, pp. 631-638, Aug. 2012
65. J. Yu, L. Xu, Z. Bi, and Wang, "Extended interference matrices for exploded view of assembly planning," IEEE Trans. Autom. Sci. Eng., vol. PP, no. 99, pp. 1-9, 2013
66. M. van Sinderen and J. Almeida, "Editorial empowering enterprises through next-generation enterprise computing," Enterprise Inf. Syst., vol. 5, no. 1, pp. 1-8, 2011
67. L. Xu, W. Viriyasitavat, P. Ruchikachorn, and A. Martin, "Using propositional logic for requirements verification of service workflow," IEEE Trans. Ind. Inf., vol. 8, no. 3, pp. 639-646, Aug. 2012
68. L. Xu, C. Wang, Z. Bi, and J. Yu, "Object-oriented templates for automated assembly planning of complex products," IEEE Trans. Autom. Sci. Eng., vol. PP, no. 99, pp. 1-12, 2013
69. S. Li, L. Xu, X. Wang, and J. Wang, "Integration of hybrid wireless networks in cloud services oriented enterprise information systems," Enterprise Inf. Syst., vol. 6, no. 2, pp. 165-187, 2012
70. J. Guo, L. Xu, G. Xiao, and Z. Gong, "Improvingmultilingual semantic interoperation in cross-organizational enterprise systems through concept disambiguation," IEEE Trans. Ind. Inf., vol. 8, no. 3, pp. 647-658, Aug. 2012
71. X. Wang and X. Xu, "DIMP: An interoperable solution for software integration and product data exchange," Enterprise Inf. Syst., vol. 6, no. 3, pp. 291-314, 2012
72. Y. Yin, J. Xie, L. Xu, and H. Chen, "Imaginal thinking-based humanmachine design methodology for the configuration of reconfigurable machine tools," IEEE Trans. Ind. Inf., vol. 8, no. 3, pp. 659-668, Aug. 2012
73. L. Li, "Effects of enterprise technology on supply chain collaboration: Analysis of China-linked supply chain," Enterprise Inf. Syst., vol. 6, no. 1, pp. 55-77, 2012
74. L.Xu, C.Wang,Z.Bi, and J.Yu, "AutoAssem:An automated assembly planning system for complex products," IEEE Trans. Ind. Inf., vol. 8, no. 3, pp. 669-678, Aug. 2012
75. D. Olson and J. Staley, "Case study of open-source enterprise resource planning implementation in a small business," Enterprise Inf. Syst., vol. 6, no. 1, pp. 79-94, 2012
76. L. Duan and L. Xu, "Business intelligence for enterprise systems: A survey," IEEE Trans. Ind. Inf., vol. 8, no. 3, pp. 679-687, Aug. 2012
77. L. Li, "Technology designed to combat fakes in the global supply chain," Business Horizons, vol. 56, pp. 167-177, 2013
78. X. Shi, L. Li, L. Yang, Z. Li, and J. Choi, "Information flow in reverse logistics: An industrial information integration study," Inf. Technol. Management, vol. 13, no. 4, pp. 217-232, 2012
79. L. Zeng, L. Li, and L. Duan, "Business intelligence in enterprise computing environment," Inf. Technol. Management, vol. 13, no. 4, pp. 297-310, 2012.