Control-oriented model for integrated diesel engine and aftertreatment systems thermal management

Control Engineering Practice

Volumn 22, Issue 1, 2014, Pages 81-93

  Chen, Pingen ^a   Wang, Junmin ^a  

^a The Ohio State University   (United States)

Author keywords

Control oriented models; Diesel engine aftertreatment systems; Thermal management

Indexed keywords

AFTERTREATMENT SYSTEMS; CONTROL ORIENTED MODELS; DIESEL ENGINE AFTERTREATMENT SYSTEMS; DIESEL OXIDATION CATALYST; DIESEL PARTICULATE FILTERS; FUEL INJECTION RATE; SELECTIVE CATALYTIC REDUCTION SYSTEMS; TEMPERATURE DYNAMICS;

ATMOSPHERIC THERMODYNAMICS; SELECTIVE CATALYTIC REDUCTION; TEMPERATURE CONTROL; UREA;

DIESEL ENGINES;

EID: 84889604802     PISSN: 09670661     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conengprac.2013.09.009     Document Type: Article

References (43)

1. Allansson, R., Blakeman, P. G., Cooper, B. J., Hess, H., Silcock, P. J., & Walker, A. P., Optimising the low temperature performance and regeneration efficiency of the continuously regenerating diesel particulate filter (CR-DPF) system. SAE Technical Paper. 2002-01-0428, 2002.
2. Bobba M., Musculus M., Neel W. Effect of post injections on in-cylinder and exhaust soot for low-temperature combustion in a heavy-duty diesel engine. SAE International Journal of Engines 2010, 3:496-516.
3. Chen, P., & Wang, J., Observer-based estimation of air-fractions for a diesel engine coupled with aftertreatment systems. Control Systems Technology, IEEE Transactions on (in press),. http://dx.doi.org/10.1109/TCST.2012.2229390.
4. Chen., P., & Wang, J. (2013). Nonlinear and adaptive control of NO/NO2 ratio for improving selective catalytic reduction system performance. Journal of the Franklin Institute, 350, 1992-2012.
5. Chen, P., & Wang, J., Control-oriented modeling of thermal behaviors for a diesel oxidation catalyst. In American Control Conference (ACC), 2012, pp. 4987-4992, 2012a.
6. Chen P., Wang J. Control-oriented modeling and observer-based estimation of solid and gas temperatures for a diesel engine aftertreatment system. Journal of Dynamic Systems, Measurement, and Control 2012, 134:061011.
7. Chen P., Wang J. Oxygen concentration dynamic model and observer-based estimation through a diesel engine aftertreatment system. Journal of Dynamic Systems, Measurement, and Control 2012, 134:031008.
8. Chi J.N., DaCosta H.F. Modeling and control of a urea-SCR aftertreatment system. SAE Transactions 2005, 114:449-464.
9. Eriksson, L., Mean value models for exhaust system temperatures. SAE Technical Paper. 2002-01-0374, 2002.
10. Frobert-IFP, A., Creff-IFP, Y., Raux-IFP, S. & Gagnepain-ADEME, L., SCR for passenger car: the ammonia-storage issue on a fe-ZSM5 catalyst. SAE Technical Paper. 2009-01-1929, 2009.
11. Grossale A., Nova I., Tronconi E. Study of a Fe-zeolite-based system as NH3SCR catalyst for diesel exhaust aftertreatment. Catalysis Today 2008, 136:18-27.
12. Guzzella L., Onder C. Introduction to modeling and control of internal combustion engine systems 2009, Springer.
13. Henein, N. A., Lai, M., Singh, I., Zhong, L. & Han, J., Characteristics of a common rail diesel injection system under pilot and post injection modes. SAE Technical Paper. 2002-01-0218, 2002.
14. Heywood J.B. Internal combustion engine fundamentals 1988, McGraw-Hill, New York.
15. Honardar, S., Busch, H., Schnorbus, T., Severin, C., Kolbeck, A. and Korfer, T., Exhaust temperature management for diesel engines assessment of engine concepts and calibration strategies with regard to fuel penalty. SAE Technical Paper. 2011-24-0176, 2011.
16. 2 concentration modeling and observer-based estimation across a diesel engine aftertreatment system. Journal of Dynamic Systems, Measurement, and Control 2011, 133:041005.
17. Hsieh M., Wang J. Development and experimental studies of a control-oriented SCR model for a two-catalyst urea-SCR system. Control Engineering Practice 2011, 19:409-422.
18. Hsieh M., Wang J. Adaptive and efficient ammonia storage distribution control for a two-catalyst selective catalytic reduction system. Journal of Dynamic Systems, Measurement, and Control 2012, 134:011012.
19. Johnson T.V. Diesel emission control in review. SAE International Journal of Fuels and Lubricants 2008, 1:68-81.
20. Kladopoulou E.A., Yang S.L., Johnson J.H., Parker G.G., Konstandopoulos A.G. A study describing the performance of diesel particulate filters during loading and regeneration: A lumped parameter model for control applications. SAE Transactions 2003, 112:647-668.
21. Koebel M., Elsener M., Kleemann M. Urea-SCR: a promising technique to reduce NOx emissions from automotive diesel engines. Catalysis Today 2000, 59:335-345.
22. Koltsakis G.C., Stamatelos A.M. Modeling thermal regeneration of wall-flow diesel particulate traps. AIChE Journal 1996, 42:1662-1672.
23. Konstandopoulos A.G., Kostoglou M. Reciprocating flow regeneration of soot filters. Combustion and Flame 2000, 121:488-500.
24. Laidler K.J. The development of the Arrhenius equation. Journal of Chemical Education 1984, 61:494-498.
25. Mahr, B., Future and potential of diesel injection systems. In THIESEL 2002 conference on thermo-and fluid-dynamic processes in diesel engines, pp. 5-17, 2002.
26. Markatou, P., Dai, J., Johansson, A., Klink, W., Castagnola, M., Watling, T., et al., Fe-Zeolite SCR model development, validation and application. SAE Technical Paper. 2011-01-1304, 2011.
27. Mentink, P., Willems, F., Kupper, F., & van den Eijnden, E., Experimental demonstration of a model-based control design and calibration method for cost optimal Euro-VI engine-aftertreatment operation. SAE Technical Paper. 2013-01-1061, 2013.
28. Moraal, P. & Kolmanovsky, I., Turbocharger modeling for automotive control applications. SAE Technical Paper. 1999-01-0908, 1999.
29. Neely G.D., Sasaki S., Huang Y., Leet J.A., Stewart D.W. New diesel emission control strategy to meet US tier 2 emissions regulations. SAE Transactions 2005, 114:512-524.
30. Parks, J., Huff, S., Kass, M., & Storey, J., Characterization of in-cylinder techniques for thermal management of diesel aftertreatment. SAE Technical Paper. 2007-01-3997, 2007.
31. Pauli, E., Lepperhoff, G., & Pischinger, F., The description of the regeneration behavior of diesel particulate traps with the aid of a mathematical model. SAE Technical Paper. 830180, 1983.
32. Payri, F., Benajes, J., Pastor, J. & Molina, S., Influence of the post-injection pattern on performance, soot and NOx emissions in a HD diesel engine. SAE Technical Paper. 2002-01-0502, 2002.
33. Piazzesi G., Devadas M., Kröcher O., Elsener M., Wokaun A. Isocyanic acid hydrolysis over Fe-ZSM5 in urea-SCR. Catalysis Communications 2006, 7:600-603.
34. Rose, D., & Boger, T., Different approaches to soot estimation as key requirement for DPF applications. SAE Technical Paper. 2009-01-1262, 2009.
35. Schär, C., Onder, C., & Geering, H., Mean-value model of the SCR system of a mobile application. in 15th Triennial in World Congress, Vol. 15, no.1, pp. 1519-1519, 2002.
36. Schär C., Onder C.H., Geering H.P. Control of an SCR catalytic converter system for a mobile heavy-duty application. Control Systems Technology, IEEE Transactions on 2006, 14:641-653.
37. Singh, P., Thalagavara, A. M., Naber, J. D., Johnson, J. H., & Bagley, S.T., An experimental study of active regeneration of an advanced catalyzed particulate filter by diesel fuel injection upstream of an oxidation catalyst. SAE Technical Paper. 2006-01-0879, 2006.
38. Sperl, A., The Influence of Post-Injection Strategies on the Emissions of Soot and Particulate Matter in Heavy Duty Euro V Diesel Engine. SAE Technical Paper. 2011-36-0350, 2011.
39. Stenning, L., Strategies for achieving pre DPF regeneration temperatures using in cylinder post injection on a common rail diesel engine with EGR, DOC and intake throttle. SAE Technical Paper. 2010-36-0306, 2010.
40. Wahlström J., Eriksson L. Modeling diesel engines with a variable-geometry turbocharger and exhaust gas recirculation by optimization of model parameters for capturing non-linear system dynamics. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 2011, 225:960-986.
41. Westerlund, C., Westerberg, B., Odenbrand, I., & Egnell, R., Model predictive control of a combined EGR/SCR HD Diesel engine. SAE Technical Paper. 2010-01-1175, 2010.
42. Yamamoto, K., Takada, K., Kusaka, J., Kanno, Y., & Nagata, M., Influence of diesel post injection timing on HC emissions and catalytic oxidation performance. SAE Technical Paper. 2006-01-3442, 2006.
43. Yezerets A., Currier N.W., Kim D.H., Eadler H.A., Epling W.S., Peden C.H.F. Differential kinetic analysis of diesel particulate matter (soot) oxidation by oxygen using a step-response technique. Applied Catalysis B: Environmental 2005, 61:120-129.