Robust optimization of the energy efficiency of the cold roll forming process

International Journal of Advanced Manufacturing Technology

Volumn 69, Issue 1-4, 2013, Pages 461-481

  Paralikas, John ^a   Salonitis, Konstantinos ^a   Chryssolouris, George ^a  

^a UNIVERSITY OF PATRAS   (Greece)

Author keywords

Cold roll forming; Energy efficiency; Noise factors; Optimization; Robust design

Indexed keywords

COMPUTATIONAL EFFICIENCY; OPTIMIZATION;

COLD ROLL FORMING; CROSS-SECTIONAL DISTRIBUTION; ENERGY EFFICIENCY INDICATOR; FINITE ELEMENTS MODELS; NOISE FACTOR; QUALITY CONSTRAINTS; ROBUST DESIGN OPTIMIZATION; ROBUST DESIGNS;

ENERGY EFFICIENCY;

EID: 84887825395     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-013-5011-0     Document Type: Article

References (39)

1. Chryssolouris, G. (2005) Manufacturing systems - theory and practice, 2nd edn. Springer, Berlin
2. Lange, K. (1985) Handbook of metal forming. McGraw-Hill, New York
3. Bonte MHA, Boogaard AH, Huetink J (2008) An optimization strategy for industrial metal forming processes. Struct Multidisc Optim 35:571-586. doi: 10.1007/s00158-007-0206-3
4. Jurecka, F. (2007) Robust design optimization based on metamodeling techniques. PhD thesis, Technical University of Munich
5. Hou B, Wang W, Li S, Lin S, Xia ZC (2010) Stochastic analysis and robust optimization for a deck lid inner panel stamping. Mater Des 31:1191-1199. doi: 10.1016/j.matdes.2009.09.033
6. Zeng G, Li SH, Yu ZQ, Lai XM (2009) Optimization design of roll profiles for cold roll forming based on response surface method. Mater Des 30:1930-1938. doi: 10.1016/j.matdes.2008.09.018
7. Hu W, Yao L-G, Hua Z-Z (2008) Optimization of sheet metal forming processes by adaptive response surface based on intelligent sampling method. J Mater Process Technol 197:77-88. doi: 10.1016/j.jmatprotec.2007.06.018
8. Sun G, Li G, Gong Z, Cui Z, Yang X, Li Q (2010) Multiobjective robust optimization method for drawbead design in sheet metal forming. Mater Des 31:1917-1929. doi: 10.1016/j.matdes.2009.10.050
9. Tang Y, Chen Y (2009) Robust design of sheet metal forming process based on adaptive importance sampling. Struct Multidisc Optim 39:531-544. doi: 10.1007/s00158-008-0343-3
10. Ingarao G, Lorenzo R, Micari F (2009) Internal pressure and counterpunch action design in Y-shaped tube hydroforming processes: a multi-objective optimization approach. Comput Struct 87:591-602. doi: 10.1016/j.compstruc.2009. 02.003
11. Oh M, Kim N (2008) Optimum design of roll forming process of slide rail using design of experiments. J Mech Sci Technol 22:1537-1543. doi: 10.1007/s12206-008-0430-9
12. Wei L, Yuying Y (2008) Multi-objective optimization of sheet metal forming process using Pareto-based genetic algorithm. J Mater Process Technol 208:499-506. doi: 10.1016/j.jmatprotec.2008.01.014
13. Donglai W, Zhenshan C, Jun C (2008) Optimization and tolerance prediction of sheet metal forming process using response surface model. Comput Mater Sci 42:228-233. doi: 10.1016/j.commatsci.2007.07.014
14. Bonte MHA, van den Boogaard AH, Huétink J (2008) An optimization strategy for industrial metal forming processes modeling, screening and solving of optimization problems in metal forming. Struct Multidisc Optim 35:571-586. doi: 10.1007/s00158-007-0206-3
15. Li DY, Peng YH, Yin JL (2007) Optimization of metal-forming process via a hybrid intelligent optimization technique. Struct Multidisc Optim 34:229-241. doi: 10.1007/s00158-006-0075-1
16. Jakumeit J, Herdy M, Nitsche M (2005) Parameter optimization of the sheet metal forming process using an iterative parallel Kriging algorithm. Struct Multidisc Optim 29:498-507. doi: 10.1007/s00158-004-0455-3
17. Zhang, G.; Hu, S. J.; Wu, X. (2003) Numerical analysis and optimization of hemming processes. Journal of Manufacturing Processes 5(1):87-96
18. Paralikas J, Salonitis K, Chryssolouris G (2010) Optimization of the roll forming process parameters - a semi empirical approach. Int J Adv Manuf Technol 47:1041-1052. doi: 10.1007/s00170-009-2252-z
19. Li W, Hu SJ, Cheng S-W (2002) Robust design and analysis for manufacturing processes with parameter interdependency. SME journal of manufacturing systems 21/2:93-100
20. Yang, K.; El-Haik, B. (2003) Design for six sigma: a roadmap for product development. McGraw-Hill, Inc.; New York, ISBN 0-07-141208-5
21. Bucher, C. (2005) Stochastic analysis in structural optimization. Weimarer Optimierungs- und Stochastiktage 2.0-1./2
22. Roos, D.; Adam, U.; Bucher, C. (2006) Robust design optimization. Weimar Optimization and Stochastic Days 3.0
23. Phadke MS (1989) Quality engineering using robust design. Prentice Hall, Englewood Cliffs
24. Paralikas J, Salonitis K, Chryssolouris G (2012) Energy efficiency of cold roll forming process. Int J Adv Manuf Technol. doi: 10.1007/s00170-012- 4405-8
25. Arcelormittal (2012). Hot rolling according to requirements. http://www.arcelormittal.com/gent/prg/selfware.pl?id-sitemap=107&language= EN. Accessed 1 Nov 2012
26. Dreistern GmbH & Co. KG (2012). Roll forming machine. http://www.dreistern.com/eng/products/rollforming/rollforming.htm. Accessed 1 Nov 2012
27. Halmos, G.T. (2006) Roll forming handbook. CRC, Boca Raton
28. Kunitsyn GA, Golubchik EM, Smirnov PN (2011) Ongoing control of the transverse thickness fluctuation of cold-rolled high-strength strip. Steel in Translation 39(10):920-924. doi: 10.3103/S0967091209100192
29. Marciniak, Z.; Duncan, J.L.; Hu, S.J. (2002) Mechanics of sheet metal forming. Butterworth-Heinemann, Oxford, ISBN 0750653000
30. International Iron & Steel Institute (2006) Advanced High Strength Steel (AHSS) application guidelines. Committee on Automotive Applications, International Iron & Steel Institute, Brussels
31. Paralikas J, Salonitis K, Chryssolouris G (2011) Investigation of the effect of roll forming pass design on main redundant deformations on profiles from AHSS. Int J Adv Manuf Technol 56:475-491. doi: 10.1007/s00170-011-3208-7
32. Paralikas J, Salonitis K, Chryssolouris G (2009) Investigation of the effects of main roll-forming process parameters on quality for a V-section profile from AHSS. Int J Adv Manuf Technol 44:223-237. doi: 10.1007/s00170-008- 1822-9
33. Unirac website (2011). http://www.unirac.com. Accessed 28 March 2013
34. Gasparini Roll Forming machines website (2011). http://www.gasparini-spa. com/eng/. Accessed 28 March 2013
35. Samco Machinery Roll Forming solutions website (2011). http://www.samco-machinery.com/. Accessed 28 March 2013]
36. Samson Roll formed products company website (2011). http://www. samsonrollform.com/UChannels.aspx. Accessed 28 March 2013
37. Johnson Bros. metal forming co. website (2011). http://www. johnsonrollforming.com/display.php/display/A1/category/2. Accessed 28 March 2013
38. Athens International Airport Solar Park Press Release (2011). http://www.aia.gr/entry.asp?pageid=741&tablepageid=12&langid= 2&entryid=374. Accessed on 28 March 2013
39. Public Power Corporation S.A. website (2011). http://www.dei.gr. Accessed 28 March 2013