An optimisation strategy for industrial metal forming processes : MModelling, screening and solving of optimisation problems in metal forming

Structural and Multidisciplinary Optimization

Volumn 35, Issue 6, 2008, Pages 571-586

  Bonte, M H A ^a   Van Den Boogaard, A H ^a   Huetink J ^a  

^a UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

Finite element method; Metal forming; Optimisation

Indexed keywords

COST REDUCTION; FINITE ELEMENT METHOD; INDUSTRIAL APPLICATIONS; OPTIMIZATION; PROBLEM SOLVING;

HYDROFORMING PROCESS; METAL FORMING PROBLEMS;

METAL FORMING;

EID: 42649114774     PISSN: 1615147X     EISSN: 16151488     Source Type: Journal    
DOI: 10.1007/s00158-007-0206-3     Document Type: Conference Paper

References (77)

1. Abedrabbo N, Zafar N, Averill R, Pourboghrat F, Sidhu R (2004) Optimization of a tube hydroforming process. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
2. António C, Castro C, Sousa L (2004) Optimization of metal forming processes. Comput Struct 82:1425-1433
3. Aydemir A, de Vree J, Brekelmans W, Geers M, Sillekens W, Werkhoven R (2005) An adaptive simulation approach design for tube hydroforming processes. J Mater Process Technol 159:303-310
4. Ben Ayed L, Delamézière A, Batoz J, Knopf-Lenoir C (2004a) Optimization and control of the blankholder force in sheet metal stamping with application to deep drawing of a cylindrical cup. In: Proceedings of ECCOMAS, Jyväskylä, 24-28 July 2004
5. Ben Ayed L, Delamézière A, Batoz J, Knopf-Lenoir C (2004b) Optimization of the blankholder force with application to the numisheet'02 deep drawing benchmark test b1. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
6. Ben Ayed L, Delamézière A, Batoz J, Knopf-Lenoir C (2005) Optimization of the blankholder force distribution in deep drawing. In: Proceedings of APOMAT, Morschach, 30-31 May 2005
7. Bonte MHA (2007) Optimisation strategies for metal forming processes. University of Twente, Enschede, The Netherlands, ISBN: 978-90-365-2523-7
8. Bonte M, van den Boogaard A, Huétink J (2005a) Metamodelling techniques for the optimisation of metal forming processes. In: Proceedings of ESAFORM, Cluj-Napoca, pp 155-158
9. Bonte M, van den Boogaard A, Huétink J (2005b) Solving optimisation problems in metal forming using finite element simulation and metamodelling techniques. In: Proceedings of APOMAT, Morschach, pp 242-251
10. Bonte M, Do T, Fourment L, van den Boogaard A, Huétink J, Habbal A (2006) A comparison of optimisation algorithms for metal forming processes. In: Proceedings of ESAFORM, Glasgow, pp 883-886
11. Bonte M, van den Boogaard A, Huétink J (2007) A metamodel based optimisation algorithm for metal forming processes. In: Banabic D. (ed) Advanced methods in material forming. Springer Verlag, Heidelberg, Germany, pp 55-72
12. Breitkopf P, Naceur H, Rassineux A, Villon P (2004) Optimizing metal forming processes using response surface approximation and inverse approach surrogate model. In: Proceedings of ESAFORM, Trondheim, April 2004
13. Breitkopf P, Naceur H, Rassineux A, Villon P (2005) Moving least squares response surface approximation: Formulation and metal forming applications. Comput Struct 83(17-18):1411-1428
14. Byon S, Hwang S (2001) FEM-based process optimal design in steady-state metal forming considering strain-hardening. Comput Struct 79(14):1363-1375
15. Cao J, Li S, Xia Z, Tang S (2001) Analysis of an axisymmetric deep-drawn part forming using reduced forming steps. J Mater Process Technol 117(1-2):193-200
16. Carrino L, Giuliano G, Napolitano G (2003a) A posteriori optimisation of the forming pressure in superplastic forming processes by the finite element method. Finite Elem Anal Des 39:1083-1093
17. Carrino L, Giuliano G, Palmieri C (2003b) On the optimisation of superplastic forming processes by the finite-element method. J Mater Process Technol 143-144(1):373-377
18. Castro C, António C, Sousa L (2004) Optimisation of shape and process parameters in metal forging using genetic algorithms. Int J Mater Process Technol 146:356-364
19. Debray K, Sun Z, Radjai R, Guo Y, Dai L, Gu Y (2004) Optimum design of addendum surfaces in sheet metal forming process. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
20. Di Lorenzo R, Filice L, Umbrello D, Micari F (2004) An integrated approach to the design of tube hydroforming processes: artificial intelligence, numerical analysis and experimental investigation. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
21. Do T, Fourment L, Laroussi M (2004) Sensitivity analysis and optimization algorithms for 3D forging process design. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
22. Duan X, Sheppard T (2002) Shape optimisation using FEA software: A V-shaped anvil as an example. J Mater Process Technol 120(1-3):426-431
23. Emmerich M, Giotis A, Özdemir M, Bäck T, Giannakoglou K (2002) Metamodel-assisted evolution strategies. In: Proceedings of the international conference on parallel problem solving from nature, Granada, 7-11 September 2002
24. Endelt B (2003) Least square optimization techniques applied on sheet metal forming. PhD thesis, Aalborg University, Aalborg
25. Endelt B, Nielsen K (2001) Least-square formulation of the object function, applied on hydro mechanical tube forming. In: Proceedings of SheMet, Leuven, 2-4 April 2001
26. Fann K, Hsiao P (2003) Optimization of loading conditions for tube hydroforming. J Mater Process Technol 140(1-3):520-524
27. Fourment L, Do T, Habbal A, Bouzaiane M (2005a) Gradient, non-gradient and hybrid algorithms for optimizing 2D and 3D forging sequences. In: Proceedings of ESAFORM, Cluj-Napoca, April 2005
28. Fourment L, Do T, Habbal A, Bouzaiane M (2005b) Optimization of forging sequences using gradient, non-gradient and hybrid algorithms. In: Proceedings of APOMAT, Morschach, 30-31 May 2005
29. Jansson T (2002) Optimization of sheet metal forming processes. Licentiate thesis, Universitet Linköping, Linköping
30. Jansson T, Andersson A, Nilsson L (2005) Optimization of draw-in for an automotive sheet metal part-an evaluation using surrogate models and response surfaces. J Mater Process Technol 159:426-234
31. Jirathearanat S, Altan T (2004) Optimization of loading paths for tube hydroforming. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
32. Johnson K, Nguyen B, Dawies R, Grant G, Khaleel M (2004) A numerical process control method for circular-tube hydroforming prediction. Int J Plast 20:1111-1137
33. Kim N, Choi K, Chen J (2001a) Die shape design optimization of sheet metal stamping process using meshfree method. Int J Numer Methods Eng 51:1385-1405
34. Kim Y, Lee J, Hong S (2001b) Optimal design of superplastic forming processes. J Mater Process Technol 112(2-3):166-173
35. Kleinermann J (2001) Identification paramétrique et optimisation des procédés de mise à forme par problèmes inverses. PhD thesis, Université de Liège, Liège (in French)
36. Kleinermann J, Ponthot J (2003) Parameter identification and shape/process optimization in metal forming simulation. J Mater Process Technol 139(1-3):521-526
37. Koc M, Allen T, Jiratheranat S, Altan T (2000) Use of FEA and design of experiments to establish design guidelines for simple hydroformed parts. Int J Mach Tools Manuf 40(15):2249-2266
38. Labergère C, Gelin J (2004a) Comparison between optimization and control strategies to determine command laws in hydroforming processes. In: Proceedings of ESAFORM, Trondheim, April 2004
39. Labergère C, Gelin J (2004b) New strategies for optimal control of command laws for tube hydroforming processes. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
40. Labergère C, Lejeune A, Gelin J (2004) Control of damage in flanges hydroforming. In: Proceedings of ECCOMAS, Jyväskylä, 24-28 July 2004
41. Lenoir H, Boudeau N (2003) An optimization procedure for springback compensation. In: Proceedings of ESAFORM, Salerno, 28-30 April 2003
42. Liew K, Tan H, Ray T, Tan M (2004) Optimal process design of sheet metal forming for minimum springback via an integrated neural network evolutionary algorithm. Struct Multidisc Optim 26:284-294
43. Lin Z, Juchen X, Xinyun W, Guoan H (2002) Sensitivity based optimization of sheet metal forming tools. J Mater Process Technol 124(3):319-328
44. Lin Z, Juchen X, Xinyun W, Guoan H (2003) Optimization of die profile for improving die life in the hot extrusion process. J Mater Process Technol 142(3):659-664
45. Lophaven S, Nielsen H, Søndergaard J (2002a) Aspects of the MATLAB toolbox DACE. Technical report IMM-REP-2002-13. Technical University of Denmark-Department of Informatics and Mathematical Modelling, Lyngby
46. Lophaven S, Nielsen H, Søndergaard J (2002b) DACE - A MATLAB Kriging Toolbox. Technical report IMM-TR-2002-12. Technical University of Denmark-Department of Informatics and Mathematical Modelling, Lyngby
47. McKay M, Beckman R, Conover W (1979) A comparison of three methods for selecting values of input variables in the analysis of output from a computer code. Technometrics 21:239-245
48. Myers R, Montgomery D (2002) Response surface methodology: process and product optimization using designed experiments, 2nd edn. Wiley, New York
49. Naceur H, Guo Y, Batoz J, Knopf-Lenoir C (2001) Optimization of drawbead restraining forces and drawbead design in sheet metal forming process. Int J Mech Sci 43(10):2407-2434
50. Naceur H, Breitkopf P, Knopf-Lenoir C, Rassineux A, Villon P (2003) Response surface methods for the optimal design of the initial blank in sheet metal forming process. In: Proceedings of ESAFORM, Salerno, 28-30 April 2003
51. Naceur H, Ben-Elechi S, Batoz J (2004a) The inverse approach for the design of sheet metal forming parameters to control springback effects. In: Proceedings of ECCOMAS, Jyväskylä, 24-28 July 2004
52. Naceur H, Ben-Elechi S, Knopf-Lenoir C, Batoz J (2004b) Response surface methodology for the design of sheet metal forming parameters to control springback effects using the inverse approach. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
53. Naceur H, Delamézière A, Batoz J, Guo Y, Knopf-Lenoir C (2004c) Optimization of drawbead restraining forces and drawbead design in sheet metal forming process. J Mater Process Technol 146:250-262
54. Nielsen H (2002) DACE, a MATLAB Kriging toolbox. http://www.imm.dtu.dk/ ~hbn/dace/
55. Ohata T, Nakamura Y, Katayama T, Nakamachi E (2003) Development of optimum process design system for sheet fabrication using response surface method. J Mater Process Technol 143-144(1):667-672
56. Palaniswamy H, Ngaile G, Altan T (2004) Optimization of blank dimensions to reduce springback in the flexforming process. J Mater Process Technol 146:28-34
57. Papalambros P, Wilde D (2000) Principles of optimal design. Cambridge University Press, New York
58. Ponthot J, Kleinermann J (2005) Optimisation methods for initial/tool shape optimisation in metal forming processes. Int J Veh Des 39(1-2):14-24
59. Poursina M, António C, Parvizian J, Sousa L, Castro C (2003) Eliminating folding defect in forging parts using a genetic algorithm. In: Proceedings of ESAFORM, Salerno, 28-30 April 2003
60. Ray P, Mac Donald B (2004) Determination of the optimal load path for tube hydroforming processes using a fuzzy load control algorithm and finite element analysis. Finite Elem Anal Des 41:173-192
61. Repalle J, Grandhi R (2004) Optimum design of forging process parameters and preform shape under uncertainties. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
62. Revuelta A, Larkiola J (2004) Applying neural networks in the final thickness optimisation of a thin hydroformed part. In: Proceedings of ECCOMAS, Jyväskylä, 24-28 July 2004
63. Sacks J, Schiller S, Welch W (1989a) Design for computer experiments. Technometrics 31:41-47
64. Sacks J, Welch W, Mitchell T, Wynn H (1989b) Design and analysis of computer experiments. Stat Sci 4:409-423
65. Sahai A, Schramm U, Buranathiti T, Chen W, Cao J, Xia C (2004) Sequential optimization and reliability assessment method for metal forming processes. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
66. Santner T, Williams B, Notz W (2003) The design and analysis of computer experiments. Springer, Berlin Heidelberg New York
67. Schenk O, Hillmann M (2004) Optimal design of metal forming die surfaces with evolution strategies. Comput Struct 82:1695-1705
68. Sheng Z, Jirathearanat S, Altan T (2004) Adaptive FEM simulation for prediction of variable blank holder force in conical cup drawing. Int J Mach Tools Manuf 44:487-494
69. Shi X, Chen J, Peng Y, Ruan X (2004) A new approach of die shape optimization for sheet metal forming processes. J Mater Process Technol 152:35-42
70. Sillekens W, Werkhoven R (2001) Hydroforming processes for tubular parts: optimisation by means of adaptive and iterative FEM simulation. Int J Form Process 4(3-4):377-393
71. Sousa L, António C, Castro C (2003) Optimisation of multi-step hot forging operations. In: Proceedings of ESAFORM, Salerno, 28-30 April 2003
72. Strano M, Carrino L (2004) Adaptive selection of loads during FEM simulation of sheet forming processes. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
73. Thiyagarajan N, Grandhi R (2004) 3-D preform shape optimization in metal forming. In: Proceedings of NUMIFORM, Columbus, OH, 13-17 June 2004
74. Weyler R, Neamtu L, Duffett G (2004) An approach to the computer simulation of metal forming processes. In: Proceedings of ECCOMAS, Jyväskylä, 24-28 July 2004
75. Yang J, Jeon B, Oh S (2001) Design sensitivity analysis and optimization of the hydroforming process. J Mater Process Technol 113:666-672
76. Yang K, El-Haik B (2003) Design for six sigma; a roadmap for product development. McGraw-Hill, New York
77. Zhao G, Ma X, Zhao X, Grandhi R (2004) Studies on optimization of metal forming processes using sensitivity analysis methods. J Mater Process Technol 147:217-228