Influence of polymer interdiffusion and clay concentration on gas barrier of polyelectrolyte/clay nanobrick wall quadlayer assemblies

Journal of Membrane Science

Volumn 452, Issue , 2014, Pages 46-53

  Tzeng, Ping ^a   Maupin, Cale R ^a   Grunlan, Jaime C ^a  

^a Department of Electrical and Computer Engineering   (United States)

Author keywords

Gas barrier; Ionization; Layer by layer assembly; Nanobrick wall; PVAm

Indexed keywords

GAS BARRIER; LAYER-BY-LAYER ASSEMBLIES; LAYER-BY-LAYER ASSEMBLY TECHNIQUE; NANOBRICK WALL; OXYGEN TRANSMISSION RATES; POLY(ETHYLENE TEREPHTHALATE) (PET); PVAM; SODIUM MONTMORILLONITE;

IONIZATION; IONIZATION OF GASES; THIN FILMS; TRANSMISSION ELECTRON MICROSCOPY;

POLYMERS;

OXYGEN; POLYACRYLIC ACID; POLYELECTROLYTE; POLYETHYLENE TEREPHTHALATE; POLYETHYLENEIMINE; POLYMER; POLYVINYLAMINE; UNCLASSIFIED DRUG;

ARTICLE; ATOMIC FORCE MICROSCOPY; CLAY; ELECTRONICS; FOOD PACKAGING; GAS DIFFUSION; IONIZATION; PRIORITY JOURNAL; THICKNESS; TRANSMISSION ELECTRON MICROSCOPY;

EID: 84887145709     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2013.10.039     Document Type: Article

References (77)

1. Ariga K., Hill J.P., Ji Q.M. Layer-by-layer assembly as a versatile bottom-up nanofabrication technique for exploratory research and realistic application. Phys. Chem. Chem. Phys. 2007, 9:2319-2340.
2. Decher G., Schlenoff J. Multilayer Thin Films: Sequential Assembly of Nanocomposite Materials 2012, Wiley-VCH, Weinheim. second ed.
3. Bertrand P., Jonas A., Laschewsky A., Legras R. Ultrathin polymer coatings by complexation of polyelectrolytes at interfaces: suitable materials, structure and properties. Macromol. Rapid Commun. 2000, 21:319-348.
4. Boulmedais F., Frisch B., Etienne O., Lavalle P., Picart C., Ogier J., Voegel J.C., Schaaf P., Egles C. Polyelectrolyte multilayer films with pegylated polypeptides as a new type of anti-microbial protection for biomaterials. Biomaterials 2004, 25:2003-2011.
5. Podsiadlo P., Paternel S., Rouillard J.M., Zhang Z.F., Lee J., Lee J.W., Gulari L., Kotov N.A. Layer-by-layer assembly of nacre-like nanostructured composites with antimicrobial properties. Langmuir 2005, 21:11915-11921.
6. Dvoracek C.M., Sukhonosova G., Benedik M.J., Grunlan J.C. Antimicrobial behavior of polyelectrolyte-surfactant thin film assemblies. Langmuir 2009, 25:10322-10328.
7. Podsiadlo P., Sui L., Elkasabi Y., Burgardt P., Lee J., Miryala A., Kusumaatmaja W., Carman M.R., Shtein M., Kieffer J., Lahann J., Kotov N.A. Layer-by-layer assembled films of cellulose nanowires with antireflective properties. Langmuir 2007, 23:7901-7906.
8. 2 nanoparticle multilayer thin films. Chem. Mater. 2007, 19:1427-1433.
9. Fujimoto K., Kyung K.H., Shiratori S. Self-assembled nano-heterostructural thin film for optical lens. Jpn. J. Appl. Phys. 2011, 50:045803.
10. Duong P.H.H., Zuo J., Chung T.-S. Highly crosslinked layer-by-layer polyelectrolyte FO membranes: understanding effects of salt concentration and deposition time on FO performance. J. Membr. Sci. 2013, 427:411-421.
11. Fadhillah F., Zaidi S.M.J., Khan Z., Khaled M., Rahman F., Hammond P. Development of multilayer polyelectrolyte thin-film membranes fabricated by spin assisted layer-by-layer assembly. J. Appl. Polym. Sci. 2012, 126:1468-1474.
12. Wang C.L., Such G.K., Widjaya A., Lomas H., Stevens G., Caruso F., Kentish S.E. Click poly(ethylene glycol) multilayers on RO membranes: fouling reduction and membrane characterization. J. Membr. Sci. 2012, 409:9-15.
13. Apaydin K., Laachachi A., Ball V., Jimenez M., Bourbigot S., Toniazzo V., Ruch D. Polyallylamine-montmorillonite as super flame retardant coating assemblies by layer-by layer deposition on polyamide. Polym. Degrad. Stab. 2013, 98:627-634.
14. Li Y.C., Mannen S., Morgan A.B., Chang S.C., Yang Y.H., Condon B., Grunlan J.C. Intumescent all-polymer multilayer nanocoating capable of extinguishing flame on fabric. Adv. Mater. 2011, 23:3926.
15. Laufer G., Kirkland C., Morgan A.B., Grunlan J.C. Intumescent multilayer nanocoating, made with renewable polyelectrolytes, for flame-retardant cotton. Biomacromolecules 2012, 13:2843-2848.
16. Chung A.J., Rubner M.F. Methods of loading and releasing low molecular weight cationic molecules in weak polyelectrolyte multilayer films. Langmuir 2002, 18:1176-1183.
17. Quinn J.F., Caruso F. Thermoresponsive nanoassemblies: layer-by-layer assembly of hydrophilic-hydrophobic alternating copolymers. Macromolecules 2005, 38:3414-3419.
18. Su X.F., Kim B.S., Kim S.R., Hammond P.T., Irvine D.J. Layer-by-layer-assembled multilayer films for transcutaneous drug and vaccine delivery. ACS Nano 2009, 3:3719-3729.
19. Ferreira M., Rubner M.F. Molecular-level processing of conjugated polymers. 1. Layer-by-layer manipulation of conjugated polyions. Macromolecules 1995, 28:7107-7114.
20. McAloney R.A., Sinyor M., Dudnik V., Goh M.C. Atomic force microscopy studies of salt effects on polyelectrolyte multilayer film morphology. Langmuir 2001, 17:6655-6663.
21. Shiratori S.S., Rubner M.F. pH-dependent thickness behavior of sequentially adsorbed layers of weak polyelectrolytes. Macromolecules 2000, 33:4213-4219.
22. Mermut O., Barrett C.J. Effects of charge density and counterions on the assembly of polyelectrolyte multilayers. J. Phys. Chem. B 2003, 107:2525-2530.
23. Buscher K., Graf K., Ahrens H., Helm C.A. Influence of adsorption conditions on the structure of polyelectrolyte multilayers. Langmuir 2002, 18:3585-3591.
24. Tan H.L., McMurdo M.J., Pan G.Q., Van Patten P.G. Temperature dependence of polyelectrolyte multilayer assembly. Langmuir 2003, 19:9311-9314.
25. Shimazaki Y., Nakamura R., Ito S., Yamamoto M. Molecular weight dependence of alternate adsorption through charge-transfer interaction. Langmuir 2001, 17:953-956.
26. Sui Z.J., Salloum D., Schlenoff J.B. Effect of molecular weight on the construction of polyelectrolyte multilayers: stripping versus sticking. Langmuir 2003, 19:2491-2495.
27. Yang Y.H., Malek F.A., Grunlan J.C. Influence of deposition time on layer-by-layer growth of clay-based thin films. Ind. Eng. Chem. Res. 2010, 49:8501-8509.
28. Podsiadlo P., Michel M., Lee J., Verploegen E., Kam N.W.S., Ball V., Qi Y., Hart A.J., Hammond P.T., Kotov N.A. Exponential growth of LBL films with incorporated inorganic sheets. Nano Lett. 2008, 8:1762-1770.
29. Svagan A.J., Akesson A., Cardenas M., Bulut S., Knudsen J.C., Risbo J., Plackett D. Transparent films based on PLA and montmorillonite with tunable oxygen barrier properties. Biomacromolecules 2012, 13:397-405.
30. Ebina T., Mizukami F. Flexible transparent clay films with heat-resistant and high gas-barrier properties. Adv. Mater. 2007, 19:2450-2453.
31. Priolo M.A., Gamboa D., Holder K.M., Grunlan J.C. Super gas barrier of transparent polymer-clay multi layer ultrathin films. Nano Lett. 2010, 10:4970-4974.
32. Yang Y.H., Bolling L., Priolo M.A., Grunlan J.C. Super gas barrier and selectivity of graphene oxide-polymer multilayer thin films. Adv. Mater. 2013, 25:503-508.
33. Yang Y.H., Haile M., Park Y.T., Malek F.A., Grunlan J.C. Super gas barrier of all-polymer multilayer thin films. Macromolecules 2011, 44:1450-1459.
34. Clark S.L., Hammond P.T. The role of secondary interactions in selective electrostatic multilayer deposition. Langmuir 2000, 16:10206-10214.
35. Zacharia N.S., Modestino M., Hammond P.T. Factors influencing the interdiffusion of weak polycations in multilayers. Macromolecules 2007, 40:9523-9528.
36. Ploehn H.J., Liu C.Y. Quantitative analysis of montmorillonite platelet size by atomic force microscopy. Ind. Eng. Chem. Res. 2006, 45:7025-7034.
37. Liston E.M., Martinu L., Wertheimer M.R. Plasma modification of polymers for improved adhesion-a critical-review. J. Adhes. Sci. Technol. 1993, 7:1091-1127.
38. Grim R.E. Clay mineralogy. Science 1962, 135:890-898.
39. Jang W.S., Grunlan J.C. Robotic dipping system for layer-by-layer assembly of multifunctional thin films. Rev. Sci. Instrum 2005, 76:1-4.
40. Gamboa D., Priolo M.A., Ham A., Grunlan J.C. Note: Influence of rinsing and drying routines on growth of multilayer thin films using automated deposition system. Rev. Sci. Instrum 2010, 81:1-3.
41. Xie A.F., Granick S. Local electrostatics within a polyelectrolyte multilayer with embedded weak polyelectrolyte. Macromolecules 2002, 35:1805-1813.
42. Choi J., Rubner M.F. Influence of the degree of ionization on weak polyelectrolyte multilayer assembly. Macromolecules 2005, 38:116-124.
43. ASTM D3985-05 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor. ASTM International, West Conshohocken, PA, 2005.
44. Ladam G., Schaad P., Voegel J.C., Schaaf P., Decher G., Cuisinier F. In situ determination of the structural properties of initially deposited polyelectrolyte multilayers. Langmuir 2000, 16:1249-1255.
45. Porcel C., Lavalle P., Decher G., Senger B., Voegel J.C., Schaaf P. Influence of the polyelectrolyte molecular weight on exponentially growing multilayer films in the linear regime. Langmuir 2007, 23:1898-1904.
46. Kharlampieva E., Sukhishvili S.A. Ionization and pH stability of multilayers formed by self-assembly of weak polyelectrolytes. Langmuir 2003, 19:1235-1243.
47. van Treslong C.J.B. Evaluation of potentiometric data of weak polyelectrolytes taking account of nearest-neighbour interaction. Recl. Trav. Chim. Pays-Bas 1978, 97:13-21.
48. Shepherd E.J., Kitchener J.A. The ionization of ethyleneimine and polyethyleneimine. J. Chem. Soc. 1956, 2448-2452.
49. Choosakoonkriang S., Lobo B.A., Koe G.S., Koe J.G., Middaugh C.R. Biophysical characterization of PEI/DNA complexes. J. Pharm. Sci. 2003, 92:1710-1722.
50. Philippova O.E., Hourdet D., Audebert R., Khokhlov A.R. pH-responsive gels of hydrophobically modified poly(acrylic acid). Macromolecules 1997, 30:8278-8285.
51. Petrov A.I., Antipov A.A., Sukhorukov G.B. Base-acid equilibria in polyelectrolyte systems: from weak polyelectrolytes to interpolyelectrolyte complexes and multilayered polyelectrolyte shells. Macromolecules 2003, 36:10079-10086.
52. Lutkenhaus J.L., McEnnis K., Hammond P.T. Nano- and microporous layer-by-layer assemblies containing linear poly(ethylenimine) and poly(acrylic acid). Macromolecules 2008, 41:6047-6054.
53. Lu X.Y., Jiang B.Z. Glass-transition temperature and molecular-parameters of polymer. Polymer 1991, 32:471-478.
54. Lee J.H., Park T.G., Park H.S., Lee D.S., Lee Y.K., Yoon S.C., Nam J.D. Thermal and mechanical characteristics of poly(l-lactic acid) nanocomposite scaffold. Biomaterials 2003, 24:2773-2778.
55. Kolarik L., Furlong D.N., Joy H., Struijk C., Rowe R. Building assemblies from high molecular weight polyelectrolytes. Langmuir 1999, 15:8265-8275.
56. Schoeler E., Poptoschev F. Caruso, Growth of multilayer films of fixed and variable charge density polyelectrolytes: effect of mutual charge and secondary interactions. Macromolecules 2003, 36:5258-5264.
57. Lee J.Y., Painter P.C., Coleman M.M. Hydrogen-bonding in polymer blends. 4. Blends involving polymers containing methacrylic-acid and vinylpyridine groups. Macromolecules 1988, 21:954-960.
58. Lu X.Y., Weiss R.A. Phase-behavior of blends of poly (ethylene glycol) and partially neutralized poly (acrylic acid). Macromolecules 1995, 28:3022-3029.
59. Kim D.K., Han S.W., Kim C.H., Hong J.D., Kim K. Morphology of multilayers assembled by electrostatic attraction of oppositely charged model polyelectrolytes. Thin Solid Films 1999, 350:153-160.
60. Sliverstein R.M., Bassler G.C., Morrill T.C. Spectrometric Identification of Organic Compounds 1981, John Wiley and Sons, New York. fourth ed.
61. Jang W.S., Rawson I., Grunlan J.C. Layer-by-layer assembly of thin film oxygen barrier. Thin Solid Films 2008, 516:4819-4825.
62. Priolo M.A., Gamboa D., Grunlan J.C. Transparent clay-polymer nano brick wall assemblies with tailorable oxygen barrier. ACS Appl. Mater. Interfaces 2010, 2:312-320.
63. Priolo M.A., Holder K.M., Gamboa D., Grunlan J.C. Influence of clay concentration on the gas barrier of clay-polymer nanobrick wall thin film assemblies. Langmuir 2011, 27:12106-12114.
64. Walther A., Bjurhager I., Malho J.M., Pere J., Ruokolainen J., Berglund L.A., Ikkala O. Large-area, lightweight and thick biomimetic composites with superior material properties via fast, economic, and green pathways. Nano Lett. 2010, 10:2742-2748.
65. Grunlan J.C., Grigorian A., Hamilton C.B., Mehrabi A.R. Effect of clay concentration on the oxygen permeability and optical properties of a modified poly(vinyl alcohol). J. Appl. Polym. Sci. 2004, 93:1102-1109.
66. Cussler E.L., Hughes S.E., Ward Iii W.J., Aris R. Barrier membranes. J. Membr. Sci. 1988, 38:161-174.
67. Triantafyllidis K.S., LeBaron P.C., Park I., Pinnavaia T.J. Epoxy-clay fabric film composites with unprecedented oxygen-barrier properties. Chem. Mater. 2006, 18:4393-4398.
68. Laachachi A., Ball V., Apaydin K., Toniazzo V., Ruch D. Diffusion of polyphosphates into (poly(allylamine)-montmorillonite) multilayer films: flame retardant-intumescent films with improved oxygen barrier. Langmuir 2011, 27:13879-13887.
69. Roberts A.P., Henry B.M., Sutton A.P., Grovenor C.R.M., Briggs G.A.D., Miyamoto T., Kano A., Tsukahara Y., Yanaka M. Gas permeation in silicon-oxide/polymer (SiOx/PET) barrier films: role of the oxide lattice, nano-defects and macro-defects. J. Membr. Sci. 2002, 208:75-88.
70. Inagaki N., Tasaka S., Hiramatsu H. Preparation of oxygen gas barrier poly(ethylene terephthalate) films by deposition of silicon oxide films plasma-polymerized from a mixture of tetramethoxysilane and oxygen. J. Appl. Polym. Sci. 1999, 71:2091-2100.
71. x-coated polyester films affect gas permeation. Thin Solid Films 2001, 397:176-185.
72. Mark J.E. Polymer Data Handbook 2009, Oxford University Press, Oxford. second ed.
73. I. Baxter, Advanced resistance deposition technology for productive roll coating, in: Procedings of the 36th Annual Technical Conference, Society of Vacuum Coaters, 1993, p. 197.
74. Jung H., Jang C.H., Yeo I.S., Song T.-H. Investigation of gas permeation through Al-metallized film for vacuum insulation panels. Int. J. Heat Mass Transfer 2013, 56:436-446.
75. Charton C., Schiller N., Fahland M., Holländer A., Wedel A., Noller K. Development of high barrier films on flexible polymer substrates. Thin Solid Films 2006, 502:99-103.
76. DeRocher J.P., Gettelfinger B.T., Wang J.S., Nuxoll E.E., Cussler E.L. Barrier membranes with different sizes of aligned flakes. J. Membr. Sci. 2005, 254:21-30.
77. Priolo M.A., Holder K.M., Greenlee S.M., Stevens B.E., Grunlan J.C. Precisely tuning the clay spacing in nanobrick wall gas barrier thin films. Chem. Mater. 2013, 25:1649-1655.