Materials selection and scaffold fabrication for tissue engineering in orthopaedics

Advanced Bioimaging Technologies in Assessment of the Quality of Bone and Scaffold Materials: Techniques and Applications

Volumn , Issue , 2007, Pages 259-288

  Wang, Min ^a  

^a UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84885823393     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-540-45456-4_16     Document Type: Chapter

References (101)

1. Arnst C, Carey J. (1998) "Biotech bodies,". Business Week, Issue 3588 (07/27/98), pp 56-63
2. Ashby MF, Evans A, Fleck N.A., Gibson LJ, Hutchinson JW, Wadley HNG (2000) Metal Foams: a design guide, Butterworth-Heinemann, Boston
3. Atala A, Lanza RP (eds) (2002) Methods of tissue engineering, Academic Press, San Diego
4. 3 substitutions in hydroxyapatite. Chem Mater 17:4125-4133
5. Bagot D'Arc M, Daculsi G (2003) Micro macroporous biphasic ceramics and fibrin sealant as a moldable material for bone reconstruction in chronic otitis media surgery. A 15-year experience. J Mater Sci Mater Med 14:229-233
6. Bonfield W, Grynpas MD, Tully A.E., Bowman J., Abram J. (1981) Hydroxyapatite reinforced polyethylene: a mechanically compatible implant material for bone replacement. Biomaterials 2:185-186
7. Branemark R, Branemark P-I, Rydevik B, Myers R.R. (2001) Osseointegration in skeletal reconstruction and rehabilitation: a review. J Rehab Res Develop 38:175-181
8. Callcut S, Knowles J.C. (2002) Correlation between structure and compressive strength in a reticulated glass-reinforced hydroxyapatite foam. J Mater Sci Mater Med 13:485-489
9. Chen Y (2006) Developing bioactive composite scaffolds for bone tissue engineering. PhD Tesis, Hong Kong Polytechnic University, Hong Kong
10. Chen Y, Mak AFT, Li J, Wang M., Shum AWT (2005a) Formation of apatite on poly(a-hydroxy acid) in an accelerated biomimetic process. J Biomed Mater Res Appl Biomater 73B:68-76
11. Chen Y, Mak AFT, Wang M. (2005b) Formation of apatite/collagen composite coating on poly(L-lactic acid) scaffolds in an accelerated biomimetic process. Trans Soc Biomater 30th Annual Meeting, Memphis, Tennessee, p 442
12. Chen Y, Mak AFT, Wang M, Li J. (2006a) Composite coating of bone-like apatite particles and collagen fibers on poly (L-lactic acid) formed through an accelerated biomimetic copre-cipitation process. J Biomed Mater Res B 77B:315-322
13. Chen Y, Mak AFT, Wang M, Li J., Wong M.S. (2006b) PLLA scaffolds with biomimetic apatite coating and biomimetic apatite/collagen composite coating to enhance osteoblast-like cells attachment and activity. Surface Coatings Technol 201:575-580
14. Chua CK, Leong KF, Lim C.S. (2003) Rapid prototyping: principles and applications, 2nd edn. World Scientific, Singapore
15. Cooper KG (2001) Rapid prototyping technology: selection and application. Dekker, New York
16. Cowan JA (ed) (1995) The biological chemistry of magnesium. VCH, New York
17. Degischer H-P, Kriszt B (eds) (2002) Handbook of cellular metals: production, processing, applications, Wiley-VCH, Weinheim
18. Devin JE, Attawia MA, Laurencin C.T. (1996) Tree dimensional degradable porous polymer-ceramic matrices for use in bone repair. J Biomater Sci Polymer Ed 7:661-669
19. Du C, Cui FZ, Zhu X.D., de Groot K (1999) Tree-dimensional nano-HAp/collagen matrix loading with osteogenic cells in organ culture. J Biomed Mater Res 44:407-415
20. Fabbri M, Celotti GC, Ravaglioli A. (1995) Hydroxyapatite-based porous aggregates: physico-chemical nature, structure, texture and architecture. Biomaterials 16:225-228
21. Fong H, Reneker D.H. (2000) Electrospinning and the formation of nanofibers. In: Salem DR (ed) Structure formation in polymeric fibers. Hanser Publishers, Munich, pp 225-246
22. Fujibayashi S, Neo M, Kim H.M., Kokubo T., Nakamura T. (2004) Osteoinduction of porous bioactive titanium metal. Biomaterials 25:443-450
23. Fung YC (1993) Biomechanics: mechanical properties of living tissues, 2nd edn. Springer, Berlin Heidelberg New York
24. Gibson LJ, Ashby M.F. (1997) Cellular solids: structure and properties, 2nd edn. Cambridge University Press, Cambridge
25. Griffith L, Naughton G. (2002) Tissue engineering: current challenges and expanding opportunities. Science 295:1009-1013
26. Helsen JA, Breme HJ (eds) (1998) Metals as biomaterials. Wiley, Chichester
27. Hench LL (2001) The story of Bioglass®: from concept to clinic. In: Pashley DW (ed) Imperial college inaugural lectures in materials science and materials engineering. Imperial College Press, London, pp 203-229
28. Heywood HK, Sembi PK, Lee D.A., Bader D.L. (2004) Cellular utilization determines viability and matrix distribution profiles in chondrocyte-seeded alginate constructs. Tissue Eng 10:1467-1479
29. Hing KA, Best SM, Tanner K.E., Bonfield W., Revell P.A. (1999) Quantification of bone ingrowth within bone-derived porous hydroxyapatite implants of varying density. J Mater Sci Mater Med 10:663-670
30. Hollander AP, Hatton PV (eds) (2004) Biopolymer methods in tissue engineering. Humana Press, Totowa
31. Hollister SJ, Maddox RD, Taboas J.M. (2002) Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 23:4095-4103
32. Hutmacher DW (2000) Polymeric scaffolds in tissue engineering bone and cartilage. Biomaterials 21:2529-2543
33. Huygh A, Schepers EJG, Barbier L, Ducheyne P. (2002) Microchemical transformation of bioactive glass particles of narrow size range, a 0-24 month study. J Mater Sci Mater Med 13:315-320
34. Iannace S, Maffezzoli A, Leo G., Nicolais L. (2001) Influence of crystal and amorphous phase morphology on hydrolytic degradation of PLLA subjected to different processing conditions. Polymer 42:3799-3807
35. 3 substrate for bone substitutes. J Biomed Mater Res (Appl Biomater) 43:77-81
36. Jiang G, Shi D. (1999) Coating hydroxyapatite on porous alumina substrate through a thermal decomposition method. J Biomed Mater Res (Appl Biomater) 48:117-120
37. Kim SR, Lee JH, Kim Y.T., Riu DH, Jung SJ, Lee YJ, Chung S.C., Kim Y.H. (2003) Synthesis of Si, Mg substituted hydroxyapatites and their sintering behaviour. Biomaterials 24:1389-1398
38. Kohn J, Abramson S, Langer R. (2004) Bioresorbable and bioerodible materials. In: Ratner BD, Hoffman AS, Schoen FJ, Lemons JE (eds) Biomaterials science: an introduction to materials in medicine, 2nd edn. Academic Press, San Diego, pp 115-127
39. Kokubo T, Kim HM, Kawashita M, Nakamura T. (2004) Bioactive metals: preparation and properties. J Mater Sci Mater Med 15:99-107
40. Lam CXF, Mo XM, Teoh S.H., Hutmacher D.W. (2002) Scaffold development using 3D printing with a starch-based polymer. Mater Sci Eng 20:49-56
41. Langer R, Vacanti J.R. (1993) Tissue engineering. Science 260:920-926
42. Lanza RP, Langer R, Vacanti J (eds) (2000) Principles of tissue engineering, 2nd edn. Academic Press, San Diego
43. Lee SH, Zhou WY, Cheung W L, Wang M (2005) Producingpolymeric scaffolds for bone tissue engineering using the selective laser sintering technique. Trans Soc Biomater 30th Annual Meeting, Memphis, Tennessee, p 348
44. LeGeros RZ, LeGeros J.P. (1993) Dense hydroxyapatite. In: Hench LL, Wilson J (eds) An introduction to bioceramics. World Scientific, Singapore, pp 139-180
45. Leong KW, Brott BC, Langer R. (1985) Bioerodible polyanhydrides as drug carrier matrices I: characterization, degradation and release characteristics. J Biomed Mater Res 19:941-955
46. Li J (2004) Polymer hydrogels. In: Teoh SH (ed) Engineering materials for biomedical applications. World Scientific, Singapore, pp 7-1 to 7-18
47. Li JP, Li SH, Van Bltterswijk CA, de Groot K (2005) A novel porous Ti6Al4V characterisation and cell attachment. J Biomed Mater Res 73A:223-233
48. Li L, Gao J, Wang Y. (2004) Evaluation of cytotoxicity and corrosion behaviour of alkali-heat-treated magnesium in simulated body fluid. Surface Coatings Technol 185:92-98
49. Li S (1999) Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids. J Biomed Mater Res (Appl Biomater) 48:342-353
50. Li WJ, Laurencin CT, Caterson E.J., Tuan RS, Ko F.K. (2002) Electrospun nanofibrous structure: a novel scaffold for tissue engineering. J Biomed Mater Res 60:613-621
51. Lindsay DT (1996) Functional human anatomy. Mosby, St. Louis
52. Lloyd-Evans M (2004) Regulating tissue engineering. Materials Today 7:48-55
53. Lysaght MJ, Hazlehurst A.L. (2004) Tissue engineering: the end of the beginning. Tissue Eng 10:309-320
54. McIntire LV (ed) (2003) WTEC panel on tissue engineering research: final report. Academic Press, San Diego
55. Mooney DJ, Mikos A.G. (1999) Growing new organs. Sci Am 280:38-43
56. Mwale F, Iordanova M, Demers C.N., Steffen T., Roughley P, Antoniou J. (2005) Biological evaluation of chitosan salts cross-linked to genipin as a cell scaffold for disk tissue engineering. Tissue Eng 11:130-140
57. Nerem RM (1992) Tissue engineering in the USA. Med Biol Engin Comput 30: CE8-CE12
58. Patrick CW J.r., Mikos AG, McIntire LV (eds) (1998) Frontiers in tissue engineering. Pergamon, Oxford
59. Peppas NA (2004) Hydrogels. In: Ratner BD, Hoffman AS, Schoen FJ, Lemons JE (eds) Bio-materials science: an introduction to materials in medicine, 2nd edn. Academic Press, San Diego, pp 100-107
60. Pereira MM, Jones JR, Hench L.L. (2005) Bioactive glass and hybrid scaffolds prepared by sol-gel method for bone tissue engineering. Adv Appl Ceram 104:35-42
61. Peter SJ, Miller ST, Zhu G, Yasko A.W., Mikos A.G. (1998) In vivo degradation of a poly(propylene fumarate)//3-tricalcium phosphate injectable composite scaffold. J Biomed Mater Res 41:1-7
62. Rahaman MN (2003) Ceramic processing and sintering, 2nd edn. Dekker, New York
63. Rice RW (2002) Ceramic fabrication technology. Dekker, New York
64. Roether JA, Boccaccini AR, Hench L.L., Maquet V., Gautier S, Jerome R. (2002) Development and in vitro characterisation of novel bioresorbable and bioactive composite materials based on polylactide foams and Bioglass® for tissue engineering applications, Biomaterials 23:3871-3878
65. Shah R, Sinanan ACM, Knowles JC, Hunt N.P., Lewis M.P. (2005) Craniofacial muscle engineering using a 3-dimensional phosphate glass fiber construct. Biomaterials 26:1497-1505
66. 3 substrate for hard tissue prosthetics. Mater Sci Engin C 6:175-182
67. 3. J Biomed Mater Res (Appl Biomater) 53:457-466
68. Skalak R, Fox CF (eds) (1988) Tissue engineering. Liss, New York
69. Song G (2005) Recent progress in corrosion and protection of magnesium alloys. Adv Engin Mater 7:563-586
70. Stile RA, Burghardt WR, Healy K.E. (1999) Synthesis and characterization of injectable poly(N-isopropylacrylamide)-based hydrogels that support tissue formation. Macromolecules 32:7370-7379
71. Sultana N Wang M (2007), Fabrication and characterisation of polymer and composite scaffolds based on polyhydroxybutyrate and polyhydroxybutyrate-co- hydroxyvalerate, Key Engineering Materials, 334-335:1229-1232
72. Tong HW Wang M (2006), Electrospinning of PHBV fibers: the processing window and elimination of defects, Proceedings of the Biomedical Engineering Conference BME2006, Hong Kong, 2006, pp 55-58
73. Wang CX, Wang M. (2000) Fabrication and characterisation of porous tricalcium phosphate. Proc 10th Int Conf on Biomedical Engineering, Singapore, pp 547-548
74. Wang M (2002) Bioceramics. In: Ikada Y (ed) Recent research developments in biomaterials. Research Signpost, Trivandrum, pp 33-76
75. Wang M (2003) Developing bioactive composite materials for tissue replacement. Biomaterials 24:2133-2151
76. Wang M, Ni J. (2004) In vitro evaluation of bioactive and biodegradable composites based on polyhydroxybutyrate. Ann Chimie 29:17-28
77. Wang M, Yong H.S. (2001) Production and evaluation of a glass reinforced hydroxyapatite composite. Proc 5th Asian Symp on Biomedical Materials, Hong Kong, pp 101-102
78. Wang M, Chen LJ, Ni J, Weng J., Yue C.Y. (2001) Manufacture and evaluation of bioactive and biodegradable materials and scaffolds for tissue engineering. J Mater Sci Mater Med 12:855-860
79. Wang M, Shum DKY, Chu CS, Lam K.O. (2006) Fabrication and evaluation of chitosan devices for peripheral nerve regeneration: an initial study. Proc Biomedical Engineering Conference BME2006, Hong Kong, pp 47-50
80. Wen CE, Yamada Y, Shimojima K., Mabuchi M, Nakamura M, Asahina T. (2000) Mechanical properties of cellular magnesium materials. Mater Sci Forum 350:359-364
81. Wen CE, Mabuchi M, Yamada Y., Shimojima K, Chino Y, Asahina T. (2001) Processing of biocompatible porous Ti and Mg. Scripta Materialia 45:1147-1153
82. Weng J, Wang M. (2001a) Producing chitin scaffolds with controlled pore size and intercon-nectivity for tissue engineering. J Mater Sci Let 20:1401-1403
83. Weng J, Wang M. (2001b) In vitro formation of bone-like apatite on the surface of solution-cast partially crystalline hydroxyapatite/chitin composite. Key Eng Mater 192-195:657-660
84. Weng J, Wang M, Chen J. (2002) Plasma sprayed calcium phosphate particles with high bioac-tivity and their use in bioactive scaffolds. Biomaterials 23:2623-2629
85. Williams D (2004) Benefit and risk in tissue engineering. Materials Today 7:24-29
86. Wu JM, Wang M (in press) Surface modification of titanium and its alloys for orthopaedic and dental applications. In: Tanaka J (ed) Surface design and modification of biomaterials for clinical application. Research Signpost, Trivandrum
87. Wu JM, Wang M, Hayakawa S., Tsuru K, Osaka A. (2006a) In vitro bioactivity of hydrogen peroxide modified titanium: effects of surface morphology and film thickness. Key Engin Mater 309-311:407-410
88. Wu JM, Wang M, Li Y.W., Zhao FD, Ding XJ, Osaka A. (2006b) Crystallization of amorphous titania gel by hot water aging and induction of in vitro apatite formation by crystallized titania. Surface Coatings Technol 201:755-761
89. Wu JM, Wang M, Osaka A (in press) Bioactive composite coating on titanium implants for hard tissue repair. Key Engin Mater
90. Wu JM, Zhang S, Zhao F.D., Li YW, Wang M, Osaka A. (2006c) Influence of film thickness on in vitro bioactivity of thin anatase films produced through direct deposition from an aqueous titanium tetrafluoride solution, Surface and Coatings Technology 201:3181-3187
91. Yang HY, Wang M. (1999) Investigation into manufacture of porous hydroxyapatite via three different routes and effects of porosifiers. Bioceramics 12:349-352
92. Yang F, Murugan R, Wang S., Ramakrishna S. (2005) Electrospinning of nanomicro scale poly(L-lactic acid) aligned fibers and their potential in neural tissue engineering. Biomaterials 26:2603-2610
93. Yang S, Leong KF, Du Z, Chua C.K. (2002) The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng 8:1-11
94. Yang XB, Bhatnagar RS, Li S, Oreffo ROC (2004) Biomimetic collagen scaffolds for human bone cell growth and differentiation. Tissue Eng 10:1148-1159
95. Yannas IV (2004) Natural materials. In: Ratner BD, Hoffman AS, Schoen FJ, Lemons JE (eds) Biomaterials science: an introduction to materials in medicine, 2nd edn. Academic Press, San Diego, pp 127-137
96. Zein I, Hutmacher DW, Tan K.C., Teoh S.H. (2002) Fuse deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23:1169-1185
97. Zhang R, Ma P.X. (1999) Poly(alpha-hydroxyl acids)/hydroxyapatite porous composites for bone-tissue engineering. I. Preparation and morphology. J Biomed Mater Res 44:446-455
98. Zhang Y, Zhang M. (2001) Synthesis and characterization of macroporous chitosan/calcium phosphate composite scaffolds for tissue engineering. J Biomed Mater Res 55:304-312
99. Zhou WY, Wang M, Cheung W.L. (2005) Synthesis of nanospheres of carbonated hydroxy-apatite by nanoprecipitation, Proceedings of the 3rd International Symposium on Apatite and Correlative Biomaterials, Wuhan, China, p 107
100. Zhou WY, Lee SH, Cheung W.L., Wang M Ip WY (2006), Selective laser sintering of porous scaffolds from poly(L-lactide) microspheres and its nanocomposite with carbonated hydroxyapatite nanospheres, Proceedings of the 20th European Conference on Biomaterials (ESB2006), Nantes, France, p 175
101. Zreiqat H, Howlett CR, Zannettino A, Evans P., Schulze-Tanzil G, Knabe C, Shakibaei M. (2002) Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants. J Biomed Mater Res 62:175-184