A novel porous Ti6A14V: Characterization and cell attachment

Journal of Biomedical Materials Research - Part A

Volumn 73, Issue 2, 2005, Pages 223-233

  Li, J P ^a,c   Li, S H ^b   Van Blitterswijk, C A ^a   De Groot, K ^a,b  

^a UNIVERSITY OF TWENTE   (Netherlands)

^b CAM Implants   (Netherlands)

^c BEIHANG UNIVERSITY   (China)

Author keywords

Cell attachment; Mechanical properties; Porous; Sintering; Ti6A14V

Indexed keywords

BIOMATERIALS; BIOMEDICAL ENGINEERING; BONE; CELLS; CYTOLOGY; DRYING; ELECTRON MICROSCOPY; ENERGY DISPERSIVE SPECTROSCOPY; POROUS MATERIALS; PYROLYSIS; SINTERING; VACUUM APPLICATIONS;

BIOMEDICAL APPLICATIONS; CELL ATTACHMENT BEHAVIORS; POLYMERIC SPONGE; TI6A14V;

TITANIUM ALLOYS;

ALLOY; ALUMINUM DERIVATIVE; BIOMATERIAL; POLYMER; TITANIUM DERIVATIVE; VANADIUM DERIVATIVE; DNA; TITANIUM; TITANIUM ALLOY (TIAL6V4);

ARTICLE; BIOMECHANICS; CELL ADHESION; CHEMICAL COMPOSITION; COMPRESSIVE STRENGTH; IMPLANT; METALLURGY; MICROSCOPY; POROSITY; POWDER; SCANNING ELECTRON MICROSCOPY; TOOTH IMPLANTATION; X RAY ANALYSIS; ANIMAL; CELL STRAIN 3T3; METABOLISM; MOUSE; OSTEOBLAST; TIME;

3T3 CELLS; ANIMALS; BIOCOMPATIBLE MATERIALS; CELL ADHESION; DNA; MICE; MICROSCOPY, ELECTRON, SCANNING; OSTEOBLASTS; TIME FACTORS; TITANIUM;

EID: 17644384335     PISSN: 00219304     EISSN: None     Source Type: Journal    
DOI: 10.1002/jbm.a.30278     Document Type: Article

References (50)

1. Long M, Rack HJ. Titanium alloys in total joint replacement: a materials science perspective. Biomaterials 1998;19:1621-1639.
2. Gu H, Xu G. Biomedical material science. Tianjin: Science Translation Press; 1993.
3. Wilke A, Landgraff M, Orth J, Kienapfel H, Grissand P, Franke R. Human bone marrow cell cultures: a sensitive method for determination of the biocompatibility of implant materials. ATLA 1999;27:137-151.
4. Pilliar RM. Powder metal-made orthopedic implants with porous surface for fixation by tissue ingrowth. Clin Orthop 1983; 176:42-51.
5. Pilliar RM, Cameron HU, Welsh RP, Binnington AG. Radiographic and morphologic studies of load-bearing porous-surfaced structured implants. Clin Orthop 1981;156:249-257.
6. Murray GA, Semple JC. Transfer of tensile loads from a prosthesis to bone using porous titanium. J Bone Joint Surg Br 1981;63-B(1):138-141.
7. Maniatopoulos C, Pilliar RM, Smith DC. Threaded versus porous-surfaced designs for implant stabilization in bone-endodontic implant model. J Biomed Mater Res 1986;20(9):1309-1333.
8. Maniatopoulos C, Pilliar RM, Smith DC. Evaluation of shear strength at the cement-endodontic post interface. J Prosthet Dent 1988;59(6):662-669.
9. Maniatopoulos C, Pilliar RM, Smith DC. Evaluation of the retention of endodontic implants. J Prosthet Dent 1988;59(4): 438-446.
10. Pilliar RM, Cameron HU, Macnab I. Porous surface layered prosthetic devices. Biomed Eng 1975;10(4):126-131.
11. Simmons CA, Valiquette N, Pilliar RM. Osseointegration of sintered porous-surfaced and plasma spray-coated implants: an animal model study of early postimplantation healing response and mechanical stability. J Biomed Mater Res 1999; 47(2):127-138.
12. Clemow AJ, Weinstein AM, Klawitter JJ, Koeneman J, Anderson J. Interface mechanics of porous titanium implants. J Biomed Mater Res 1981;15(1):73-82.
13. Bobyn JD, Pilliar RM, Cameron HU, Weatherly GC, Kent GM. The effect of porous surface configuration on the tensile strength of fixation of implants by bone ingrowth. Clin Orthop 1980(149):291-298.
14. Katz JL, Pilliar RM, Berkowitch J, Christel P, Higham P, Kempeneers R, Knox GF, Scott I, Sudanese A. Biomechanical stability and design. Stiffness and remodelling. Ann NY Acad Sci 1988;523:283-286.
15. Cameron HU, Pilliar RM, Macnab I. The rate of bone ingrowth into porous metal. J Biomed Mater Res 1976;10(2):295-302.
16. Chen PQ, Turner TM, Ronnigen H, Galante J, Urban R, Rostoker W. A canine cementless total hip prosthesis model. Clin Orthop 1983(176):24-33.
17. Landon GC, Galante JO, Maley MM. Noncemented total knee arthroplasry. Clin Orthop 1986(205):49-57.
18. Bobyn JD, Cameron HU, Abdulla D, Pilliar RM, Weatherly GC. Biologic fixation and bone modelling with an unconstrained canine total knee prosthesis. Clin Orthop 1982(166):301-312.
19. Hahn H, Palich W. Preliminary evaluation of porous metal surfaced titanium for orthopedic implants. J Biomed Mater Res 1970;4(4):571-577.
20. Galante J, Rostoker W, Lueck R. Sintered fiber metal composites as a basis for attachment of implants to bone. J Bone Joint Surg Am 1971;53(1):101-114.
21. Welsh RP, Pilliar RM, Macnab I. Surgical implants. The role of surface porosity in fixation to bone and acrylic. J Bone Joint Surg Am 1971;53(5):963-977.
22. Wu BD, Cui YF. Research on porous titanium for medical implant material. Rare Met Mater Eng 1988;4:55-58.
23. Wu BD, Guo FH. A study of preparation of man-made hipbone by using composite porous titanium. Technol Powder Metall 1990;8(4):145-149.
24. Pilliar RM. Overview of surface variability of metallic endosseous dental implants: textured and porous surface-structured designs. Implant Dent 1998;7(4):305-314.
25. Pilliar RM, Deporter DA, Watson PA, Todescan R. The Endopore implant-enhanced osseointegration with a sintered porous-surfaced design. Oral Health 1998;88(7):61-64.
26. Pilliar RM. P/M processing of surgical implants: sintered porous surfaces for tissue-to-implant fixation. Int J Powder Metall 1998;34(8):33-45.
27. Asaoka K, Kuwayama N, Okuno O, Miura I. Mechanical properties and biomechanical compatibility of porous titanium for dental implants. J Biomed Mater Res 1985;19(6):699-713.
28. Oliveira MV, Pereira LC, Cairo CAA. Porous structure characterization in titanium coating for surgical implants. Mater Res 2002;5(3):269-273.
29. Oh IH, Nomura N, Masahashi N. Mechanical properties of porous titanium compacts prepared by powder sintering. Scr Mater 2003;49:1197-1202.
30. Ducheyne P, Willems G, Martens M, Helsen J. In vivo metal-ion release from porous titanium-fiber material. J Biomed Mater Res 1984;18(3):293-308.
31. Kuo KN, Gitelis S, Sim FH. Segmental replacement of long bones using titanium fiber metal composite following tumor resection. Clin Orthop 1983;176:108-114.
32. Galante J, Rostoker W. Fiber metal composites in the fixation of skeletal prosthesis. J Biomed Mater Res 1973;4:43-61.
33. Matin B, Cornelia S, Bronkremer HP, Baur H. High-porosity titanium, stainless steel, and superalloy parts. Adv Eng Mater 2000;2(4):196-199.
34. Engh CA. Hip arthroplasty with a Moore prosthesis with porous coating. Clin Orthop 1983;176:52-66.
35. Pilliar RM. Porous-surfaced metallic implants for orthopedic applications. J Biomed Mater Res 1987;21(A1 Suppl):1-33.
36. Kwon S-H, Jun Y-K, Hong S-H. Calcium phosphate bioceramics with various porosities and dissolution rates. J Am Ceram Soc 2002;85(12):3129-3131.
37. Akiyama S, Imagawa K, Kitahara A, Nagata S, Morimoto SK, Nishikawa T, Itoh M. Foamed metal and method of producing the same. US Patent 4,713,277. 1987.
38. Gergely V, Curran DC, Clyne TW. The FOAMCARP process: foaming of aluminium MMCS by the chalk-aluminium reaction in precursors. Comp Sci Technol 2003;63(16):2301-2310.
39. Mu W, Deng GZ, Luo FC. Titanium metallurgy. Beijing: Metallurgy Industry Press; 1998.
40. Wilson CE, De Bruijn JD, Kruijt M, Van Blitterswijk CA, Verbout AJ, Dhert WV. Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research. J Biomed Mater Res 2004;68A:123-132.
41. Zhang C, Wang J, Zhang X. Osteoinductivity and biomechanics of a porous ceramic with autogenic periosteum. J Biomed Mater Res 2000;52:354-359.
42. Gibson LJ, Ashby MF. Cellular solids: structure and properties. Cambridge: Cambridge University Press; 1997.
43. Weinstein AM, Klawitter JJ, Koeneman JB. Structure properties relationship for porous Ti6A14V. In: Proceedings of the Third Annual Meeting of the Society for Biomaterials; 1977; New Orleans, LA.
44. Cook SD, Anderson RC, Thongpreda N, Haddad RJ Jr. The effect of post-sintering heat treatments on the tensile properties of Ti-6A1-4V alloy. Biomater Med Devices Artif Organs 1986; 14(3-4):167-180.
45. Cook SD, Renz EA, Haddad RJ. Post-sintering heat treatments for porous coated Ti-6A1-4V alloy. Biomater Med Devices Artif Organs 1985;13(1-2):37-50.
46. Kohn DH, Ducheyne P. A parametric study of the factors affecting the fatigue strength of porous coated Ti6A1-4V implant alloy. J Biomed Mater Res 1990;24(11):1483-1501.
47. Kohn DH, Ducheyne P. Materials for bone and joint replacement. In: Williams DF, editor. Materials science and technology. A comprehensive treatment. New York: VCH Publications; 1992. p 31.
48. Cook SD, Thongpreda N, Anderson RC, Haddad RJ Jr. The effect of post-sintering heat treatments on the fatigue properties of porous coated Ti-6A1-4V alloy. J Biomed Mater Res 1988;22(4):287-302.
49. Lin JY, Zhang Y. Effect of fabrication technology on the structures and properties of TiC ceramics foam. Powder Metall Technol 2000;18(1):12-15.
50. Wegmann G, Gerling R, Ebel T, Karl-Heinz O. Metal injection moulding of titanium alloys for medical applications. In: Proceedings from Europe Advance Materials Week Conference; 2001; Munich, Germany.