Wear

Biomedical Materials

Volumn , Issue , 2009, Pages 183-199

  Jin, Chunming ^a   Wei, Wei ^b  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

^b North Carolina State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84885101043     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-0-387-84872-3_6     Document Type: Chapter

References (64)

1. Wright TM and Goodman SB, eds. Implant Wear in Total Joint Replacement: Clinical and Biologic Issues, Material and Design Considerations, American Academy of Orthopaedic Surgeons: Rosemont, 2001.
2. Zhu YH, Chiu KY and Tang WM. Polyethylene wear and osteolysis in total hip arthroplasty, J Orthop Surg, 2001, 9:91-99.
3. Teoh SH. Fatigue of biomaterials: a review, Int J Fatigue, 2000, 22:825-837.
4. Kelpetko V, Moritz A, Schurawitzki H, Domanig E and Wolner E. Leaflet fracture in Edwards-Duromedics bileaflet valves. J Thoracic Cardiovascular Surg, 1989, 97, 90-94.
5. Hutchings IM, ed. Biotribology - A Personal View, Friction, Lubrication and Wear of Artificial Joints, Professional Engineering Publishing Ltd.: Bury St. Edmunds, UK, 2003.
6. Buckley DH, Jones WR Jr, Sliney HE, Zaretsky EV, Townsend DP, and Loewenthal SH. Tribology: The Story of Lubrication and Wear, NASA Technical Memorandum 101430, 1985.
7. Bhushan B, ed. Modern Tribology Handbook, CRC Press: Boca Raton, FL, 2001.
8. Black J. Biological performance of materials: Fundamentals of biocompatibility, Marcel Dekker: New York, NY, 1992.
9. Standard terminology relating to wear and erosion, standard G-40-01, American Society for Testing and Materials, 2001.
10. Hutchings IM, The Challenge of Wear, in Stachowiak GW, ed. Wear-Materials, Mechanisms and Practice: Chichester, England, JohnWiley & Sons Ltd.: Hoboken, NJ, UK, 2005, Chapter 1, pp. 1-7.
11. Bayer RG, Mechanical wear: fundamentals and testing, Marcel Dekker Inc.: New York, NY, 2004.
12. McKellop HA. The lexicon of polyethylene wear in artificial joints. Biomaterials, 2007, 28:5049-5057.
13. Stachowiak GW and Batchelor AW. Engineering Tribology, Elsevier Butterworth-Heinemann: Amsterdam, 2005.
14. Buckley DH and Miyoshi K. Friction and wear of ceramics. Wear, 1984, 100:333-353.
15. Archard JF. Contact and Rubbing of Flat Surfaces. J Appl Phys, 1953, 24:981-988.
16. Burwell JT Jr. Survey of possible wear mechanisms. Wear, 1957, 1:119-141.
17. Burwell JT and Strang CD. On the Empirical Law of Adhesive Wear, J Appl Phys, 1952, 23, 18-28.
18. Rabinowicz E. Adhesive wear. Friction and Wear of Materials. John Wiley and Sons: New York, NY, 1965.
19. Bhushan B and Gupta B. Handbook of Tribology. Section 3.3. McGraw-Hill: New York, NY, 1991.
20. Santavirta S, Konttinen YT, Lappalainen R, Anttila A, Goodman SB, Lind M, Smith L, Takagi M, Gdmez-Barrena E, Nordsletten L, and Xu J-W. Materials in total joint replacement, Current Orthopaedics, 1998, 12, 51-57.
21. Kurtz SM, Muratoglu OK, Evans M, and Edidin AA. Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty. Biomaterials, 1999, 20:1659-1688.
22. Li S and Burstein AH. Ultra high molecular weight polyethylene. The material and its use in total hip joint implants. J Bone Joint Surg Am, 1994, 76:1080-1090.
23. Klapperich C, Komvopoulos K, and Pruitt L. Tribological properties and microstructure evolution of ultra-high molecular weight polyethylene. Trans ASME, 1999, 121:394-402.
24. McKellop H, Clarke IC, Markolf KL, and Amstutz HC. Wear characteristics of UHMW polyethylene: a method for accurately measuring extremely low wear rates, J Biomed Mater Res, 1978, 12:895-927.
25. Chiesa R, Tanzi MC, Alfonsi S, Paracchini L, Moscatelli M, and Cigada A. Enhanced wear performance of highly crosslinked UHMWPE for artificial joints. J Biomed Mater Res A, 2000, 50:381-387.
26. Buford A and Goswami T. Review of wear mechanisms in hip implants: Paper I - General. Mater Design, 2004, 25:385-393.
27. Buford A and Goswami T. Review of wear mechanisms in hip implants: Paper II - ceramics IG004712. Mater Design, 2004, 25:385-393.
28. Daly BM and Yin J. Subsurface oxidation of polyethylene. J Biomed Mater Res, 1998, 42:523-529.
29. Goldman M, Lee M, Gronsky R, and Pruitt L. Oxidation of ultrahigh molecular weight polyethylene characterized by Fourier Transform Infrared Spectrometry. J BiomedMater Res, 1997, 37:43-50.
30. Lee CS, Yoo SH, and Jho JY, Mechanical properties of ultra-high molecular weight polyethylene irradiated with gamma rays. Macromol Res, 2004, 12:112-118.
31. Rose RM, Goldfarb EV, Ellis E, and Crugnola AN. Radiation sterilization and the wear rate of polyethylene. J Orthop Res, 1984, 2:393-400.
32. Goldman M and Pruitt L. Comparison of the effects of gamma radiation and low temperature hydrogen peroxide gas plasma sterilization on the molecular structure, fatigue resistance, and wear behavior of UHMWPE. J Biomed Mater Res, 1998, 40:378-384.
33. McKellop H, Shen F-W, Lu B, Campbell P, and Salovey R. Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. J Bone Joint Surg, 2000, 82:1708-1725.
34. Maher SA, Furman BD, Babalola OM, Cottrell JM, and Wright TM. Effect of crosslinking, remelting, and aging on UHMWPE damage in a linear experimental wear model. J Orthop Res, 2007, 25:849-857.
35. Bracco P, Brunella V, Luda MP, Zanetti M, and Costa L, Radiation-induced crosslinking of UHMWPE in the presence of co-agents: chemical and mechanical characterisation, Polymer, 2005, 46:10648-10657.
36. Wright TM and Bartel DL. The problem of surface damage in polyethylene total knee components. Clin Orthop, 1986, 205:67-74.
37. Wright TM, Astion DJ, Bansal M, Rimnac CM, Green T, Insall JN, and Robinson RP. Failure of carbon fiber-reinforced polyethylene total knee-replacement components. A report of two cases. J Bone Joint Surg A, 1988, 70:926-932.
38. Wright TM, Rimnac CM, Faris PM, and Bansal M. Analysis of surface damage in retrieved carbon fiber-reinforced and plain polyethylene tibial components from posterior stabilized total knee replacements. J Bone Joint Surg A, 1988, 70:1312-1319.
39. Heisel C, Silva M, Dela Rosa MA, and Schmalzried TP. Short-term in vivo wear of crosslinked polyethylene. J Bone Joint Surg Am, 2004, 86:748-751.
40. Dorr LD, Wan Z, Shahrdar C, Sirianni L, Boutary M, and Yun A. Clinical performance of a durasul highly cross-linked polyethylene acetabular liner for total hip arthroplasty at five years. J Bone Joint Surg Am, 2005, 87:1816-1821.
41. Martell JM, Verner JJ, and Incavo SJ. Clinical performance of a highly cross-linked polyethylene at two years in total hip arthroplasty: a randomized prospective trial. J Arthroplasty, 2003, 18:55-59.
42. Steinberg DR and Steinberg ME. The early history of arthroplasty in the United States. Clin. Orthop Relat Res, 2000, 374:55-89.
43. Rieker CB, K̈ottig P, Scḧon R, Windler M, and Wyss UP. Clinical wear performance of metalonmetal hip arthroplasties, in Jacobs JJ and Craig TL, ed. Alternative Bearing Surfaces in Total Joint Replacement, ASTM International: West Conshohocken, PA, 1998.
44. Rahaman MN, Yao A, Bal BS, Garino JP, and Ries MD. Ceramics for prosthetic hip and knee joint replacement. J Am Ceram Soc, 2007, 90:1965-1988.
45. Boutin P, Christel P, Dorlot JM, Meunier A, De Roquancourt A, Blanquaert D, Herman S, Sedel L, and Witvoet J. The use of dense alumina-alumina ceramic combination in total hip replacement, J Biomed Mater Res, 1988, 22:1203-1232.
46. Hutchings IM, ed. Friction, Lubrication and Wear of Artificial Joints, Professional Engineering Publishing Ltd.: Bury St. Edmunds, UK, 2003.
47. Sato T, Ohtaki S, Endo T, and Shimada M. Science and technology of zirconia. Advances in Ceramics. American Ceramic Society: Westerville, OH, 1988.
48. Affatato S, Frigo M, and Toni A. An in vitro investigation of diamond-like carbon as a femoral head coating. J Biomed Mater Res (Appl Biomater), 2000, 53:221-226.
49. Dearnaley PA. A review of metallic, ceramic and surface treated metals used for bearing surfaces in human joint replacements. Proc Inst Mech Eng, 1999, 213-H:107-135.
50. Enke K, Dimigen H, and Hubsch H. Frictional properties of diamond-like carbon layers, Appl Phys Lett, 1980, 36:291-292.
51. Pharr GM, Callahan DL, McAdams SD, Tsui TY, Anders S, Anders A, Ager JW, Brown IG, Bhatia CS, Silva SR P, and Robertson J. Hardness, elastic modulus, and structure of very hard carbon films produced by cathodic-arc deposition with substrate pulse-biasing. Appl Phys Lett, 1996, 68:779-781.
52. Ronkainen H, Varjus S, Koskinen J, and Holmberg K. Differentiating the tribological performance of hydrogenated and hydrogen-free DLC coatings. Wear, 2001, 249:260-266.
53. Holmberg K and Mathews A. Coatings tribology: A concept, critical aspects, and future directions, Thin Solid Films, 1994, 253:173-178.
54. Collins CB, Davanloo F, Lee TJ, Park H, and You JH. Noncrystalline films with the chemistry, bonding, and properties of diamond. J Vac Sci Technol B, 1993, 11:1936-1941.
55. Schneider D, Schwarz T, Scheibe HJ, and Panzner M. Non-destructive evaluation of diamond and diamond-like carbon films by laser induced surface acoustic waves. Thin Solid Films, 1997, 295:107-116.
56. Erdemir A, Bindal C, Pagan J, and Wilbur P. Characterization of transfer layers on surfaces sliding against diamond-like hydrocarbon films in dry nitrogen. Surf Coatings Technol, 1995, 76-77, 559-563.
57. Liu Y, Erdemir A, and Meletis EI. An investigation of the relationship between graphitization and frictional behavior of DLC coatings, Surf Coatings Technol, 1996, 86:564-568.
58. Lappalainen R, Heinonen H, Anttila A, and Santavirta S. Some relevant issues related to the use of amorphous diamond coatings for medical applications. Diamond Rel Mater, 1998, 7:482-485.
59. Dearnaley G and Mccabe A. Bioapplications of diamond-like carbon coatings. 4th World Biomater Cong, Berlin, 1992.
60. Sheeja D, Tay BK, Lau SP, and Nung LN. Tribological characterization of diamond-like carbon coatings on Co-Cr-Mo alloy for orthopaedic applications. Sur Coatings Technol, 2001, 146:410-416.
61. Morshed MM, McNamara BP, Cameron DC, and Hashmi M S J, Effect of surface treatment on the adhesion of DLC film on 316L stainless steel. Surf Coatings Technol, 2003, 163:541-545.
62. Schwan J, Ulrich S, Theel T, Roth H, Ehrhardt H, Becker P, and Silva S R P. Stress-induced formation of high-density amorphous carbon thin films. J Appl Phys, 1997, 82:6024-6030.
63. Morrison ML, Buchanan RA, Liaw PK, Berry CJ, Brigmon R, Riester L, Jin C, and Narayan RJ. Electrochemical and antimicrobial properties of diamond-like carbon-metal composite films. Diamond Related Mater, 2006, 15:138-146.
64. Bell BF, Scholvin D, Jin C, and Narayan RJ. Pulsed laser deposition of hydroxyapatitediamondlike carbon multilayer films and their adhesion aspects. J Adhesion Sci Technol, 2006, 18:221-232.