Bio-based thermosetting polymers from vegetable oils

Journal of Renewable Materials

Volumn 1, Issue 1, 2013, Pages 3-27

  Xia, Ying ^a   Quirino, Rafael L ^b   Larock, Richard C ^c  

^a Iowa State University of Science and Technology   (United States)

^b GEORGIA SOUTHERN UNIVERSITY   (United States)

^c IOWA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

THERMOSETS;

BIO-BASED; ENVIRONMENTAL CONCERNS; LATEST DEVELOPMENT; LOW COSTS; POLYMERIZATION METHOD; RENEWABLE RESOURCE; THERMOMECHANICAL PROPERTIES; THERMOSETTING POLYMERS;

VEGETABLE OILS;

EID: 84884198694     PISSN: 21646325     EISSN: 21646341     Source Type: Journal    
DOI: 10.7569/JRM.2012.634103     Document Type: Article

References (147)

1. J. P. Pascault, H. Sa utereau, J. Verdu and R. J. J. Williams, Thermosetting Polymers, pp. 1-4, Marcel Dekker, New York (2002).
2. D. Ratna, Handbook o f Thermoset Resins, pp. 1-2, iSmithers Rapra Publishing, Shawbury, Shrewsbury, Shropshire (2009).
3. S. H. Goodman, Introd uction, in Handbook of Thermoset Plastics (Second Edition), H. G. Sidney, (Ed.), pp. 1-22, William Andrew Publishing, Westwood NJ (1999).
4. C. K. Williams and M. A. Hillmyer, Polymers from renewable resources: a perspective for a special issue of polymer reviews. Polym. Rev. 48, 1 (2008).
5. Y. Xia and R. C. Laro ck, Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem. 12, 1893 (2010).
6. Y. S. Lu and R. C. Lar ock, Novel polymeric materials from vegetable oils and vinyl monomers: preparation, properties, and applications. Chemsuschem. 2, 136 (2009).
7. A. Gandini, The irru ption of polymers from renewable resources on the scene of macromolecular science and technology. Green Chem. 13, 1061 (2011).
8. A. Gandini, Polymers from renewable resources: a challenge for the future of macromolecular materials. Macromolecules 41, 9491 (2008).
9. Y. S. Lu and R. C. Lar ock, Novel polymeric materials from vegetable oils and vinyl monomers: preparation, properties, and applications. ChemSusChem. 2, 136 (2009).
10. M. N. Belgacem and A. Gandini, Materials from Vegetable Oils: Major Sources, Properties and Applications, in Monomers, Polymers and Composites from Renewable Resources, M. N. Belgacem and A. Gandini, (Ed.), pp. 39-66, Elsevier, Amsterdam (2008).
11. M. R. Van De Mark an d K. Sandefur, Vegetable Oils in Paint and Coatings, in Industrial Uses of Vegetable Oil, S. Z. Erhan, (Ed.), pp. 143-162, AOCS Publishing, Peoria IL (2009).
12. U. Poth, Drying Oil s and Related Products, in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co. Weinheim, (2001).
13. D. B. Turley, Introd uction to Chemicals from Biomass, pp. 21-46, John Wiley & Sons, New York (2008).
14. A. Demirbas, New bi orenewable fuels from vegetable oils. Energy Sources. A 32, 628 (2010).
15. M. Galià, L. M. de E spinosa, J. C. Ronda, G. Lligadas, and V. Cadiz, Vegetable oil-based thermosetting polymers. Eur. J. Lipid Sci. Technol. 112, 87 (2010).
16. B. Cakmakli, B. Haz er, I. O. Tekin, and F. B. Comert, Synthesis and characterization of polymeric soybean oil-g-methyl methacrylate (and n-butyl methacrylate) graft copolymers: biocompatibility and bacterial adhesion. Biomacromolecules 6, 1750 (2005).
17. D. D. Andjelkovic, M. Valverde, P. Henna, F. K. Li, and R. C. Larock, Novel thermosets prepared by cationic copolymerization of various vegetable oils-synthesis and their structure-property relationships. Polymer 46, 9674 (2005).
18. R. C. Larock, X. Y. D ong, S. Chung, C. K. Reddy, and L. E. Ehlers, Preparation of conjugated soybean oil and other natural oils and fatty acids by homogeneous transition metal catalysis. J. Am. Oil Chem. Soc. 78, 447 (2001).
19. M. Valverde, D. And jelkovic, P. P. Kundu, and R. C. Larock, Conjugated low-saturation soybean oil thermosets: free-radical copolymerization with dicyclopentadiene and divinylbenzene. J. Appl. Polym. Sci. 107, 423 (2008).
20. D. D. Andjelkovic an d R. C. Larock, Novel rubbers from cationic copolymerization of soybean oils and dicyclopentadiene. 1. Synthesis and characterization. Biomacromolecules. 7, 927 (2006).
21. J. Lu, S. Khot and R. P. Wool, New sheet molding compound resins from soybean oil. I. Synthesis and characterization. Polymer. 46, 71 (2005).
22. S. G. Tan and W. S. C how, Biobased epoxidized vegetable oils and its greener epoxy blends: a review. Polym. Plast. Technol. Eng. 49, 1581 (2010).
23. U. Biermann, J. O. M etzger, and M. A. R. Meier, Acyclic triene metathesis oligo-and polymerization of high oleic sun flower oil. Macromol. Chem. Phys. 211, 854 (2010).
24. Y. Xia and R. C. Lar ock, Castor oil-based thermosets with varied crosslink densities prepared by ring-opening metathesis polymerization (ROMP). Polymer 51, 2508 (2010).
25. N. Dutta, N. Karak, and S. K. Dolui, Synthesis and characterization of polyester resins based on Nahar seed oil. Prog. Org. Coat. 49, 146 (2004).
26. A. Zlatanic, C. Lav a, W. Zhang, and Z. S. Petrovic, Effect of structure on properties of polyols and polyurethanes based on different vegetable oils. J. Polym. Sci. B 42, 809 (2004).
27. M. A. R. Meier, J. O. Metzger and U. S. Schubert, Plant oil renewable resources as green alternatives in polymer science. Chem. Soc. Rev. 36, 1788 (2007).
28. K. A. Tallman, B. Ro schek, and N. A. Porter, Factors influencing the autoxidation of fatty acids: effect of olefin geometry of the nonconjugated diene. J. Am. Chem. Soc. 126, 9240 (2004).
29. B. Cakmakli, B. Haz er, I. O. Tekin, S. Kizgut, M. Koksal, and Y. Menceloglu, Synthesis and characterization of polymeric linseed oil grafted methyl methacrylate or styrene. Macromol. Biosci. 4, 649 (2004).
30. V. Sharma, J. S. Ban ait, R. C. Larock, and P. P. Kundu, Synthesis and characterization of styrene-co-divinylbenzene-graft-linseed oil by free radical polymerization. Express Polym. Lett. 2, 265 (2008).
31. R. L. Quirino and R. C. Larock, Rh-based biphasic isomerization of carbon-carbon double bonds in natural oils. J. Am. Oil Chem. Soc. 89, 1113 (2012).
32. D. D. Andjelkovic, B. Min, D. Ahn, and R. C. Larock, Elucidation of structural isomers from the homogeneous rhodium-catalyzed isomerization of vegetable oils. J. Agric. Food Chem. 54, 9535 (2006).
33. P. H. Henna, D. D. A ndjelkovic, P. P. Kundu, and R. C. Larock, Biobased thermosets from the free-radical copolymerization of conjugated linseed oil. J. Appl. Polym. Sci. 104, 979 (2007).
34. S. N. Khot, J. J. Las cala, E. Can, S. S. Morye, G. I. Williams, G. R. Palmese, S. H. Kusefoglu, and R. P. Wool, Development and application of triglyceride-based polymers and composites. J. Appl. Polym. Sci. 82, 703 (2001).
35. J. La Scala and R. P. Wool, Property analysis of triglyceride-based thermosets. Polymer. 46, 61 (2005).
36. L. M. Bonnaillie and R. P. Wool, Thermosetting foam with a high bio-based content from acrylated epoxidized soybean oil and carbon dioxide. J. Appl. Polym. Sci. 105, 1042 (2007).
37. S. P. Bunker and R. P. Wool, Synthesis and characterization of monomers and polymers for adhesives from methyl oleate. J. Polym. Sci. A. 40, 451 (2002).
38. S. P. Hui, T. Yoshim ura, T. Murai, H. Chiba, and T. Kurosawa, Determination of regioisomeric hydroperoxides of fatty acid cholesterol esters produced by photosensitized peroxidation using HPLC. Analyt. Sci. 16, 1023 (2000).
39. A. Samadi, L. A. Mar tinez, M. A. Miranda, and I. M. Morera, Mechanism of lipid peroxidation photosensitized by tiaprofenic acid: product studies using linoleic acid and 1,4-cyclohexadienes as model substrates. Photochem. Photobiol. 73, 359 (2001).
40. L. M. de Espinosa, J. C. Ronda, M. Galia, and V. Cadiz, A new route to acrylate oils: crosslinking and properties of acrylate triglycerides from high oleic sunflower oil. J. Polym. Sci. A. 47, 1159 (2009).
41. R. Wool, S. Kusefog lu, G. Palmese, S. Khot, and R. Zhao, High modulus polymers and composites from plant oils, US Patent 6121398, assigned to University of Delaware (September 19, 2000).
42. E. Can, S. Kusefoglu, and R. P. Wool, Rigid, thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleates. J. Appl. Polym. Sci. 81, 69 (2001).
43. E. Can, S. Kusefogl u, and R. P. Wool, Rigid thermosetting liquid molding resins from renewable resources. II. Copolymers of soybean oil monoglyceride maleates with neopentyl glycol and bisphenol A maleates. J. Appl. Polym. Sci. 83, 972 (2002).
44. M. Mosiewicki, M. I. Aranguren, and J. Borrajo, Mechanical properties of linseed oil monoglyceride maleate/styrene copolymers. J. Appl. Polym. Sci. 97, 825 (2005).
45. E. Can, R. P. Wool, and S. Kusefoglu, Soybean-and castor oil-based thermosetting polymers: mechanical properties. J. Appl. Polym. Sci. 102, 1497 (2006).
46. E. Can, R. P. Wool, and S. Kusefoglu, Soybean and castor oil based monomers: synthesis and copolymerization with styrene. J. Appl. Polym. Sci. 102, 2433 (2006).
47. S. M. Stoesser and A. R. Gabel, Styrene-tung oil copolymer, US Patent 2190906, assigned to The Dow Chemical Company (February 20, 1940).
48. F. K. Li and R. C. La rock, New soybean oil-styrenedivinylbenzene thermosetting copolymers. VI. Timetemperature-transformation cure diagram and the effect of curing conditions on the thermoset properties. Polym. Int. 52, 126 (2003).
49. P. P. Kundu and R. C. Larock, Novel conjugated linseed oil-styrene-divinylbenzene copolymers prepared by thermal polymerization. 1. Effect of monomer concentration on the structure and properties. Biomacromolecules. 6, 797 (2005).
50. P. P. Kundu and R. C. Larock, Effect of drying catalysts on the properties of thermal copolymers from conjugated linseed oil-styrene-divinylbenzene. Prog. Org. Coat. 65, 10 (2009).
51. F. K. Li and R. C. La rock, Thermosetting polymers from cationic copolymerization of tung oil: synthesis and characterization. J. Appl. Polym. Sci. 78, 1044 (2000).
52. F. K. Li, J. Hasjim, and R. C. Larock, Synthesis, structure, and thermophysical and mechanical properties of new polymers prepared by the cationic copolymerization of corn oil, styrene, and divinylbenzene. J. Appl. Polym. Sci. 90, 1830 (2003).
53. M. Sacristan, J. C. Ronda, M. Galia, and V. Cadiz, Synthesis and properties of boron-containing soybean oil based thermosetting copolymers. Polymer 51, 6099 (2010).
54. M. Sacristan, J. C. Ronda, M. Galia, and V. Cadiz, Siliconcontaining soybean oil-based copolymers. Synthesi and properties. Biomacromolecules 10, 2678 (2009).
55. F. Li, M. V. Hanson, and R. C. Larock, Soybean oil-divinylbenzene thermosetting polymers: synthesis, structure, propertie and their relationships. Polymer 42, 1567 (2001).
56. F. K. Li and R. C. L arock, New soybean oil-styrene-divinylbenzene thermosetting copolymers. I. Synthesis and caracterization. J. Appl. Polym. Sci. 80, 658 (2001).
57. F. K. Li and R. C. L arock, New soybean oil-styrenedivinylbenzene thermosetting copolymers. V. Shap memory effect. J. Appl. Polym. Sci. 84, 1533 (2002).
58. P. Badrinarayanan, Y. S. Lu, R. C. Larock, and M. R. Kessler, Cure characterization of soybean oil-styrenedivinylbenzene thermoseting copolymers. J. Appl. Polym. Sci. 113, 1042 (2009).
59. Y. Xia, P. H. Henna , and R. C. Larock, Novel thermosets from the cationic copolymerization of modified linseed oils andicyclopentadiene. Macromol. Mat. Eng. 294, 590 (2009).
60. M. S. Kim, K. W. Le e, T. Endo, and S. B. Lee, Benzylpyrazinium salts as thermally latent initiators in the polymerization of glycidyl phenyl ether: substituent effect on the initiator activity and mechanistic aspects. Macromolecules. 37, 5830 (2004).
61. S. J. Park, F. L. J in, and J. R. Lee, Effect of biodegradable epoxidized castor oil on physicochemical and mechanical propertie of epoxy resins. Macromol. Chem. Phys. 205, 2048 (2004).
62. F. L. Jin and S. J. Park, Thermomechanical behavior of epoxy resins modified ith epoxidized vegetable oils. Polym. Int. 57, 577 (2008).
63. F. L. Jin and S. J. Park, Impact-strength improvement of epoxy resins reinforced witha biodegradable polymer. Mat. Sci. Eng. A 478, 402 (2008).
64. R. L. Banks and G. C. Bailey, Olefin disproportionation-A new catalytic process. Indust. Eng. Chem. Prod. Res. Dev. 3, 170 (1964).
65. J. L. Herisson and Y. Chauvin, Transformation catalysis of olefins by tungsten complexes. 2. Telomerization of cyclic olefins inpresence of acyclic olefins. Makromol. Chem. 141, 161 (1971).
66. J. C. Mol, Catalyti c metathesis of unsturated fatty acid esters and oils. Top. Catal. 27, 97 (2004).
67. T. M. Trnka and R. H. Grubbs, The development of L2X2Ru=CHR olefin metathesis catalysts:an organometallic success story. Acc. Chem. Res. 34, 18 (2001).
68. J. C. Mol, Applicat ion of olefin metathesis in oleocemistry: an example of green chemistry. Green Chem. 4, 5 (2002).
69. P. B. Vandam, C. Bo elhouw, and M. C. Mittelme, Metathesis of unsaturated fatty-acid esters by a homogeneous tungsten hexachloride-tetmethyltin catalyst. J. Chem. Soc. Chem. Commun. 22, 1221 (1972).
70. W. Buchowicz and J. C. Mol, Catalytic activity and selectivity of Ru(=CHPh)Cl2(PCy3)2 in the metathesis of linear alkenes. J. Mol. Catal. A 148, 97 (1999).
71. R. R. Schrock and C. Czekelius, Recent advances in the syntheses and applications of molybdenum and tungsten alkylidene and alkylidyne catalysts for the metathesis of alkenes and alkynes. Adv. Synth. Catal. 349, 55 (2007).
72. R. R. Schrock and A. H. Hoveyda, Molybdenum and tungsten imido alkylidene complexes as efficien olefin-metathesis catalysts. Angew. Chem. Int. Ed. 42, 4592 (2003).
73. P. Henna and R. C. Larock, Novel thermosets obtained by the ring-opening metathesis polymerization of a functionalized vegetble oil and dicyclopentadiene. J. Appl. Polym. Sci. 112, 1788 (2009).
74. P. H. Henna, M. R. K essler, and R. C. Larock, Fabrication and properties of vegetable-oil-based glass fiber composites by ring-pening metathesis polymerization. Macromol. Mat. Eng. 293, 979 (2008).
75. H. Y. Cui and M. R. Kessler, Glass fiber reinforced ROMP-based bio-renewable polymers: enhancement of the intrface with silane coupling agents. Comp. Sci. Technol. 72, 1264 (2012).
76. K. Haman, P. Badri narayanan, and M. R. Kessler, Cure characterization of the ring-opening metathesis polymerizatin of linseed oil-based thermosetting resins. Polym. Int. 58, 738 (2009).
77. T. C. Mauldin, K. H aman, X. Sheng, P. Henna, R. C. Larock, and M. R. Kessler, Ring-opening metathesis polymerization of a modified linseed ol with varying levels of crosslinking. J. Polym. Sci. A 46, 6851 (2008).
78. W. Jeong, T. C. Mau ldin, R. C. Larock, and M. R. Kessler, Bio-based rubbers by concurrent cationic and ring-opening metathesis polmerization of a modified linseed oil. Macromol. Mat. Eng. 294, 756 (2009).
79. P. H. Henna and R. C. Larock, Rubbery thermosets by ring-opening metathesis polymerization of a funconalized castor oil and cyclooctene. Macromol. Mat. Eng. 292, 1201 (2007).
80. Y. Xia, Y. S. Lu, and R. C. Larock, Ring-opening metathesis polymerization (ROMP) of norbornenyl-functionalized fatty alcohols. Polymer. 51, 53 (2010).
81. Q. P. Tian and R. C. Larock, Model studies and he ADMET polymerization of soybean oil. J. Am. Oil Chem. Soc. 79, 479 (2002).
82. M. D. Refvik, R. C. Larock, and Q. Tian, Ruthenimcatalyzed metathesis of vegetable oils. J. Am. Oil Chem. Soc. 76, 93 (1999).
83. P. A. Fokou and M. A. R. Meier, Acyclic triene metathesis polymerization with chain-stoppers: molecular weight controlin the synthesis of branched polymers. Macromol. Rapid Commun. 29, 1620 (2008).
84. C. Ozturk, H. Mutl u, M. A. R. Meier, and S. H. Kusefoglu, 4-Vinylbenzenesulfonic acid adduct of epoxidized soybean oil: snthesis, free radical and ADMET polymerizations. Eur. Polym. J. 47, 1467 (2011).
85. E. del Rio, G. Lli gadas, J. C. Ronda, M. Galia, M. A. R. Meier, and V. Cadiz, Polyurethanes from polyols obtained by ADMET polymerization of a castor oilbased dien: characterization and shape memory properties. J. Polym. Sci. A. 49, 518 (2011).
86. E. del Rio, G. Lli gadas, J. C. Ronda, M. Galia, V. Cadiz, and M. A. R. Meier, Shape memory polyurethanes from renewable polyols obtained by ATMET polymerization of glceryl triundec-10-enoate and 10-undecenol. Macromol. Chem. Phys. 212, 1392 (2011).
87. L. M. De Espinosa, M. A. R. Meier, J. C. Ronda, M. Galia, and V. Cadiz, Phosphorus-containing renewable polyester-polyols via ADMET polymerization: syntheis, functionalization, and radical Crosslinking. J. Polym. Sci. A. 48, 1649 (2010).
88. I. O. Igwe and O. O gbobe, Studies on the properties of polyesters ad polyester blends of selected vegetable oils. J. Appl. Polym. Sci. 75, 1441 (2000).
89. V. Sharma and P. Kundu, Condensation polymers from natural oils. Prog. Polym. Sci. 33, 1199 (2008).
90. T. Eren, S. H. Kus efoglu, and R. Wool, Polymerization of maleic anhydride-modified plant oils with polyols. J. Appl. Polym. Sci. 90, 197 (2003).
91. Z. S. Petrovic, I. Cvetkovic, D. Hong, X. Wan, W. Zhang, T. Abraham, and J. Malsam, Polyeste polyols and polyurethanes from ricinoleic acid. J. Appl. Polym. Sci. 108, 1184 (2008).
92. B. Roy and N. Kara k, Modification of hyperbranched epxy by vegetable oil-based highly branched polyester resin. Polym. Bull. 68, 2299 (2012).
93. U. Konwar, N. Kara k, and T. Jana, Vegetable oil-based highly branched polyester modiied epoxy based low VOC high solid industrial paint. J. Appl. Polym. Sci. 125, E2 (2012).
94. S. Ataei, R. Yahya , and S. N. Gan, Coating performances of copolymers from a novel palm oil-based macromer and methyl methacrylate. Pigm. Resin Technol. 41, 112 (2012).
95. U. Konwar, N. Kara k, and M. Mandal, Mesua ferrea L. seed oil based highly therostable and biodegradable polyester/clay nanocomposites. Polym. Deg. Stab. 94, 2221 (2009).
96. U. Konwar, N. Kara k, and M. Mandal, Vegetable oil based highly branched polyester/clay silve nanocomposites as antimicrobial surface coating materials. Prog. Org. Coat. 68, 265 (2010).
97. M. Alam and N. M. A landis, Development of ambient cured polyeseramide coatings from linseed oil: a sustainable resource. J. Polym. Environ. 19, 391 (2011).
98. Y. Deng, X. D. Fan, and J. Waterhouse, Synthesis and characterizatio of soy-based copolyamides with different a-amino acids. J. Appl. Polym. Sci. 73, 1081 (1999).
99. H. Zhang, H. X. Pan , Q. H. Zhang, and D. J. Chen, Studies on the particle morphology of waterborne cationic polyurethane/polyacrylate microemulsions. J. Macromol. Sci. A. 43, 1793 (2006).
100. D. P. Pfister, Y. Xia, anR. C. Larock, Recent advances in vegetable oil-based polyurethanes. ChemSusChem. 4, 703 (2011).
101. E. Hablot, D. Zh eng, M. Bouquey, and L. Averous, Polyurethanes based on castor oil: kinetics, chemical, mechanical and thermal properties. Macromol. Mat. Eng. 293, 922 (2008).
102. H. Yeganeh and P. Hojati-Talemi, Preparation and properties of novel biodegradable polyurethane networks based on castor oil and poly(ethylene glycol). Polym. Deg. Stab. 92, 480 (2007).
103. V. B. Veronese, R. K. Menger, M. M. D. Forte, and C. L. Petzhld, Rigid polyurethane foam Based on modified vegetable oil. J. Appl. Polym. Sci. 120, 530 (2011).
104. S. D. Desai, J. V. Patel, and V. K. Sinha, Polyurethane adhesive system from biomaterial-based polyol for bonding wood. Int. J. Adhes. Adhes. 23, 393 (2003).
105. S. Dutta and N. K arak, Synthesis, characterization of poly(urethaneamide) resins from Nahar seed oil for surface coating applications. Prog. Org. Coat. 53, 147 (2005).
106. Z. S. Petrovic, L. T. Yang, A. Zlatanic, W. Zhang, and I. Javni, Netwrk structure and properties of polyurethanes from soybean oil. J. Appl. Polym. Sci. 105, 2717 (2007).
107. C. S. Wang, L. T. Y ang, B. L. Ni, and G. Shi, Polyurethane networks from different soy-based polyols by the ring opening of eoxidized soybean oil with methanol, glycol, and 1,2-propanediol. J. Appl. Polym. Sci. 114, 125 (2009).
108. S. D. Miao, S. P. Z hang, Z. G. Su, and P. Wang, A novel vegetale oil-lactate hybrid monomer for synthesis of high-Tg polyurethanes. J. Polym. Sci. A. 48, 243 (2010).
109. A. Zlatanic, Z. S. Petrovic, and K. Duk, Structure and properties of triolein-based polyurethane networks. Biomacromolecules. 3, 1048 (2002).
110. P. Rojek and A. Prociak, Effect of different rapeseed-oilbas polyols on mechanical properties of flexible polyurethane foams. J. Appl. Polym. Sci. 125, 2936 (2012).
111. H. Pawlik and A. Prociak, Influence of palm oil-based polyol on the properties of flexible polyurethane foams. J. Polym. Environ. 20, 438 (2012).
112. M. Jalilian, H. Y eganeh, and M. N. Haghighi, Preparation and characterization of polyurethane elecrical insulating coatings derived from novel soybean oil-based polyol. Polym. Adv. Technol. 21, 118 (2010).
113. M. Jalilian, H. Y eganeh, and M. N. Haghighi, Synthesis and properties of polyurethane networs derived from new soybean oil-based polyol and a bulky blocked polyisocyanate. Polym. Int. 57, 1385 (2008).
114. A. Guo, D. Demydo v, W. Zhang, and Z. Petrovic, Polyols and polyurethanes from hydroformylation of soybean oil. J. Polym. Environ. 10, 49 (2002).
115. Z. S. Petrovic, A. Guo, I. Javni, I. Cvetkovic, and D. P. Hog, Polyurethane networks from polyols obtained by hydroformylation of soybean oil. Polym. Int. 57, 275 (2008).
116. L. Hojabri, X. H. Kong, and S. S. Narine, Fatty acidderived diisocyanate and biobased polyurethane produced from vegetable oil: Synthesis, polymerization, and characterization. Biomacromolecules 10, 884 (2009).
117. X. Kong and S. S. Narine, Physical properties of polyurethane plastic sheets produced from polyols from canola oil. Biomacromolecules 8, 2203 (2007).
118. M. Desroches, S. Caillol, V. Lapinte, R. Auvergne, and B. outevin, Synthesis of biobased polyols by thiol-ene coupling from vegetable oils. Macromolecules 44, 2489 (2011).
119. Y. S. Lu and R. C. Larock, Soybean-oil-based waterborne polyurethane dispsions: effects of polyol functionality and hard segment content on properties. Biomacromolecules. 9, 3332 (2008).
120. Y. S. Lu and R. C. Larock, soybean oil-based, aqueous cationic polyurethane dispersions: synthesis and properties. Prog. Org. Coat. 69, 31 (2010).
121. Y. Lu and R. C. L arock, Aqueous cationic polyurethane dispersions from vegetable oils. ChemSusChem. 3, 329 (2010).
122. S. Sundar, N. Vij ayalakshmi, S. Gupta, R. Rajaram, and G. Radhakrishnan, Aqueous dispersions of polyurethane-polyvinyl pyrdine cationomers and their application as binder in base coat for leather finishing. Prog. Org. Coat 56, 178 (2006).
123. Y. Xia, Z. Y. Zhan g, M. R. Kessler, B. Brehm-Stecher, and R. C. Larock, Antibacterial soybean oil-basedcationic polyurethane coatings prepared from different amino polyols. ChemSusChem. (2012) doi: 10.1002/cssc.201200352.
124. Y. Xia and R. C. L arock, Castor-oil-based waterborne polyurethane dispersions cured with an aziridinebased crosslinker. Macromol. Mat. Eng. 296, 703 (2011).
125. Y. Xia and R. C. L arock, Preparation and properties of aqueous castor oi-based polyurethane-silica nanocomposite dispersions through a sol-gel process. Macromol. Rapid Commun. 32, 1331 (2011).
126. G. L. Tellez, E. V igueras-Santiago, S. Hernandez-Lopez, and B. Bilyeu, Synhesis and thermal cross-linking study of partially-aminated epoxidized linseed oil. Design. Monom. Polym. 11, 435 (2008).
127. J. D. Espinoza-Per ez, B. A. Nerenz, D. M. Haagenson, Z. G. Chen, C. A. Ulven, and D. P. Wesenborn, Comparison of curing agents for epoxidized vegetable oils applied to composites. Polym. Compos. 32, 1806 (2011).
128. G. Das and N. Kar ak, Epoxidized Mesua ferrea L. seed oil-based reactive diluent for BPA epoxy resin and their green nanocomposites. Prog. Org. Coat. 66, 59 (2009).
129. F. Mustata, N. Tu dorachi, and D. Rosu, Curing and thermal behavioof resin matrix for composites based on epoxidized soybean oil/diglycidyl ether of bisphenol A. Compos. B. 42, 1803 (2011).
130. M. Stemmelen, F. Pessel, V. Lapinte, S. Caillol, J. P. Habas, and J. J. Robin, A fully biobased epoxy resin from vegetable oils: from the synthesis of the precursors by thiol-ene reaction to the study of the final material. J. Polym. Sci. A 49, 2434 (2011).
131. P. Czub, Synthes is of high-molecular-weight epoxy resins from modified natural oils and Bisphenol A or Bisphenol A-based epoxy resins. Polym. Adv. Technol. 20, 194 (2009).
132. P. Czub, A compar ison of the syntheses of high molar mass epoxy resins on the basis of two groups of modified vegetable oils. Macromol. Symp. 277, 162 (2009).
133. B. K. Ahn, S. Kraf t, D. Wang, and X. S. Sun, Thermally stable, transparent, pressure-sensitive adhesives from epoxidized and dihydroxyl soybean oil. Biomacromolecules. 12, 1839 (2011).
134. N. Supanchaiyamat , P. S. Shuttleworth, A. J. Hunt, J. H. Clar, and A. S. Matharu, Thermosetting resin based on epoxidised linseed oil and bio-derived crosslinker. Green Chem. 14, 1759 (2012).
135. Z. X. Liu, Y. D. Xu , L. Cao, C. Y. Bao, H. H. Sun, L. Wang, K. R. Dai, and L. Y. hu, Phosphoester cross-linked vegetable oil to construct a biodegradable and biocompatible elastomer. Soft Matter. 8, 5888 (2012).
136. D. D. Martini, B. A. Braga, and D. Saios, On the curing of linseed oil epoxidized methyl esters with different cyclic dicarboxylic anhydrides. Polymer. 50, 2919 (2009).
137. H. Miyagawa, M. M isra, L. T Drzal, and A. K. Mohanty, Fracture toughness and impact strength of anhydridecured biobased epoxy. Polym. Eng. Sci. 45, 487 (2005).
138. F. I. Altuna, L. H. Esposito, R. A. Ruseckaite, and P. M. Stefani, Thermal and mechanical properies of anhydride-cured epoxy resins with different contents of biobased epoxidized soybean oil. J. Appl. Polym. Sci. 120, 789 (2011).
139. C. Ozturk and H. Kusefoglu, New polymers from plant oil derivatives and styrene-maleic anhydride copolymers. J. Appl. Polym. Sci. 116, 355 (2010).
140. C. Ozturk and S. H. Kusefoglu, Polymerization of epoxized soybean oil with maleinized soybean oil and maleic anhydride grafted polypropylene mixtures. J. Appl. Polym. Sci. 118, 3311 (2010).
141. C. zturk and S. H. Kusefoglu, Polymerization of epoxidized soybean oil with maleinized polybutadiene. J. Appl. Polym. Sci. 120, 116 (2011).
142. J. Hong, Q. Luo, X. M. Wan, Z. S. Petrovic, and B. K. Shah, Biopolymers from vegetable oils via catalyst-and solvent-free "Click" chemistry: effects of cross-linking density. Biomacromolecules 13, 261 (2012).
143. J. A. Hong, Q. A. L uo, and B. K. Shah, Catalyst-andsolvent-Free "Click" chemistry: a facile approach to obtain cross-linked biopolymers from soybean oil. Biomacromolecules 11, 2960 (2010).
144. L. M. de Espinosa, J. C. Ronda, M. Galia, and V. Cdiz, A new enone-containing triglyceride derivative as prcursor of thermosets from renewable resources. J. Polym. Sci. A 46, 6843 (2008).
145. M. Moreno, G. Lli gadas, J. C. Ronda, M. Galia, and V. Caldiz, Phospha-Michael addition t enone-containing triglyceride derivatives as an efficient route to flame retardant renewable thermosets. J. Polym. Sci. A 50, 306 (2012).
146. M. Black and J. W. Rawlins, Thiol-ene UV-curable coatings using vegetable oil macromonomers. Eur. Polym. J 45, 1433 (2009).
147. A. F. Luo, X. S. Ji ang, H. Lin, and J. Yin, "Thiol-ene" photo-cured hybrid materials based on POSS and renewable vegetable oil. J. Mat. Chem. 21, 12753 (2011).