Influence of temperature on passive film properties on Ni-Cr-Mo Alloy C-2000

Corrosion Science

Volumn 76, Issue , 2013, Pages 424-431

  Zhang, Xiangrong ^a   Shoesmith, David W ^a  

^a UNIVERSITY OF WESTERN ONTARIO   (Canada)

Author keywords

A: nickel; B: SIMS; B: XPS; C: crevice corrosion; C: passive films

Indexed keywords

CREVICE CORROSION; INCREASING TEMPERATURES; LAYERED STRUCTURES; MILD TEMPERATURES; PASSIVE CURRENT DENSITIES; PASSIVE FILM PROPERTIES; PASSIVE FILMS; TEMPERATURE INCREASE;

MOLYBDENUM; MOLYBDENUM ALLOYS; NICKEL; SECONDARY ION MASS SPECTROMETRY; X RAY PHOTOELECTRON SPECTROSCOPY;

COPPER;

EID: 84883232075     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2013.07.016     Document Type: Article

References (58)

1. R. Rebak, Corrosion of non-ferrous alloys, I-Nickel-, Cobalt-, Copper-, Zirconium-, and Titanium-based alloys, in: M. Schutze (Ed.), Corrosion and Environmental Degradation, Wiley-VCH, vol. 11, 2000, pp. 69-111.
2. Andresen P.L., Young L.M., Catlin G.M., Emigh P.W., Gordon G.M. Stress-corrosion-crack initiation and growth-rate studies on titanium grade 7 and alloy 22 in concentrated groundwater. Metall. Mater. Trans. A 2005, 36A(5):1187-1198.
3. Gray J.J., Hayes J.R., Gdowski G.E., Viani B.E., Orme C.A. Influence of solution pH, anion concentration, and temperature on the corrosion properties of alloy 22. J. Electrochem. Soc. 2006, 153(3):B61-B67.
4. Gray J.J., Hayes J.R., Gdowski G.E., Orme C.A. Inhibiting effects of nitrates on the passive film breakdown of alloy 22 in chloride environments. J. Electrochem. Soc. 2006, 153(5):B156-B161.
5. Rodríguez M.A., Carranza R.M., Rebak R.B. Passivation and depassivation of alloy 22 in acidic chloride solutions corrosion, passivation, and anodic films. J. Electrochem. Soc. 2010, 157(1):C1-C8.
6. Rodríguez M.A., Carranza R.M., Rebak R.B. Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22. Metall. Mater. Trans. A 2005, 36A(5):1179-1185.
7. Lloyd A.C., Shoesmith D.W., McIntyre N.S., Noël J.J. Effect of temperature and potential on the passive corrosion properties of alloys C 22 and C 276. J. Electrochem. Soc. 2003, 150(4):B120-B130.
8. Lloyd A.C., Noël J.J., McIntyre N.S., Shoesmith D.W. Cr, Mo and W alloying additions in Ni and their effect on passivity. Electrochim. Acta 2004, 49(17-18):3015-3027.
9. Lloyd A.C., Noël J.J., McIntyre N.S., Shoesmith D.W. The open-circuit ennoblement of alloy C-22 and other Ni-Cr-Mo alloys. JOM 2005, 57(1):31-35.
10. Zagidulin D., Zhang X., Zhou J., Noël J.J., Shoesmith D.W. Characterization of surface composition on alloy-22 in neutral chloride solutions. Surf. Interface Anal. 2013, 45:1014-1019.
11. Zhang X., Zagidulin D., Shoesmith D.W. Characterization of film properties on the Ni-Cr-Mo alloy C-2000. Electrochim. Acta 2013, 89:814-822.
12. Gray J.J., Orme C.A. Electrochemical impedance spectroscopy study of the passive films of alloy 22 in low pH nitrate and chloride environments. Electrochim. Acta 2007, 52(7):2370-2375.
13. MacDonald D.D., Sun A., Priyantha N., Jayaweera P. An electrochemical impedance study of alloy-22 in NaCl brine at elevated temperature: II. Reaction mechanism analysis. J. Electroanal. Chem. 2004, 572:421-431.
14. Priyantha N., Jayaweera P., Macdonald D.D., Sun A. An electrochemical impedance study of alloy 22 in NaCl brine at elevated temperature. I. Corrosion behavior. J. Electroanal. Chem. 2004, 572:409-419.
15. MacDonald D.D., Sun A. An electrochemical impedance spectroscopic study of the passive state on alloy 22. Electrochim. Acta 2006, 51:1767-1779.
16. Bojinov M., Kinnunen P., Sundholm G. Electrochemical behavior of Nickel-Chromium alloys in a high-temperature aqueous electrolyte. Corrosion 2003, 59(2):91-103.
17. Bojinov M., Galtayries A., Kinnunen P., Machet A., Marcus P. Estimation of the parameters of oxide film growth on nickle-based alloys in high-temperature water electrolytes. Electrochim. Acta 2007, 52:7475-7483.
18. Jakupi P., Zagidulin D., Noël J.J., Shoesmith D.W. The impedance properties of the oxide film on the Ni-Cr-Mo alloy-22 in neutral concentrated sodium chloride solution. Electrochim. Acta 2011, 56(17):6251-6259.
19. Gordon G.M.F.N. Speller award lecture: corrosion considerations related to permanent disposal of high-level radioactive waste. Corrosion 2002, 58(10):811-825.
20. Dunn D.S., Yang L., Wu C., Cragnolino G.A. Effect of inhibiting oxyanions on the localized corrosion susceptibility of waste package container materials. Mater. Res. Soc. Sympos. 2004, 33-38.
21. Day S.D., Whalen M.T., King K.J., Hust G.A., Wong L.L., Estill J.C., Rebak R.B. Corrosion behavior of alloy 22 in oxalic acid and sodium chloride solutions. Corrosion 2004, 60(9):804-814.
22. Macdonald D.D., Engelhardt G., Jayaweera P., Priyantha N., Davydov A. The deterministic prediction of localized corrosion damage to alloy C-22 HLNW canisters. Eur. Federat. Corros. Publ. 2003, 36:103-117.
23. Kehler B.A., Ilevbare G.O., Scully J.R. Crevice corrosion stabilization and repassivation behavior of alloy 625 and alloy 22. Corrosion 2001, 57:1042-1065.
24. Evans K.J., Yilmaz A., Day S.D., Wong L.L., Estill J.C., Rebak R.B. Using electrochemical methods to determine alloy 22's crevice corrosion repassivation potential. JOM 2005, 57(1):56-61.
25. Dunn D.S., Pan Y.M., Chiang K.T., Yang L., Cragnolino G.A., He X. The localized corrosion resistance and mechanical properties of alloy 22 waste package outer containers. JOM 2005, 57(1):49-55.
26. V. Jain, D. Dunn, N. Sridhar, L. Yang, Effects of measurement methods and solution chemistry on the evaluation of the localized corrosion of candidate high-level waste container materials, Corrosion 2003, paper No. 03690, Houston, TX, NACE International.
27. D.S. Dunn, L. Yang, Y.M. Pan, G.A. Cragnolino, Localized Corrosion Susceptibility of Alloy 22, Corrosion 2003, Paper No. 03697, Houston, TX, NACE International.
28. R.B. Rebak, Factors Affecting the Crevice Corrosion Susceptibility of Alloy 22, Corrosion 2005, Paper No. 05610, Houston, TX, NACE International.
29. Mishra A.K., Frankel G.S. Crevice corrosion repassivation of alloy 22 in aggressive environments. Corrosion 2008, 64(11):836-844.
30. Ortíz M.R., Rodríguez M.A., Carranza R.M., Rebak R.B. Corroison 2010, 66(10). 105002-105002-12.
31. Giordano1 C.M., Ortíz M.R., Rodríguez M.A., Carranza R.M., Rebak R.B. Crevice corrosion testing methods for measuring repassivation potential of alloy 22. Corrosion Eng., Sci. Technol. 2011, 46(2):129-133.
32. Carranza R.M., Rodríguez M.A., Rebak R.B. Effect of fluoride ions on crevice corrosion and passive behavior of alloy 22 in hot chloride solutions. Corrosion 2007, 63(5):480-490.
33. He X., Brettman B., Jung H. Effects of test methods on crevice corrosion repassivation potential measurements of alloy 22. Corrosion 2009, 65(7):449-460.
34. Rodríguez M.A., Carranza R.M., Rebak R.B. Effect of potential on crevice corrosion kinetics of alloy. Corrosion 2010, 66(1). 015007-015007-14.
35. Jakupi P., Zagidulin D., Noël J.J., Shoesmith D.W. Crevice corrosion of Ni-Cr-Mo alloys. Electrochem. Soc. Trans. 2007, 3(31):259-271.
36. Jakupi P., Noël J.J., Shoesmith D.W. Intergranular corrosion resistance of σ3 grain boundaries in alloy 22. Electrochem. Solid- State Lett. 2010, 13(3):C1-C3.
37. Jakupi P., Noël J.J., Shoesmith D.W. Crevice corrosion initiation and propagation on alloy-22 under galvanically-coupled and galvanostatic conditions. Corros. Sci. 2011, 53(10):3122-3130.
38. Jakupi P., Noël J.J., Shoesmith D.W. The evolution of crevice corrosion damage on the Ni-Cr-Mo-W alloy-22 determined by confocal laser scanning microscopy. Corros. Sci. 2012, 54:260-269.
39. Jakupi P., Wang F., Noël J.J., Shoesmith D.W. Corrosion product analysis on crevice corroded alloy-22 specimens. Corros. Sci. 2011, 53(5):1670-1679.
40. Ashida Y., McMillion L.G., Taylor M.L. The effect of temperature oscillation on the passive corrosion properties of alloy 22. Electrochem. Commun. 2007, 9(5):1102-1106.
41. Evans K.J., Rebak R.B. Passivity of alloy 22 in concentrated electrolytes effect of temperature and solution composition. Electrochem. Soc. Proc. 2002, 13:344-354.
42. Biesinger M.C., Payne B.P., Lau L.W.M., Gerson A., Smart R.S.C. X-ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems. Surf. Interface Anal. 2009, 41(4):324-332.
43. McMillion L.G., Sun A., MacDonald D.D., Jones D.A. General corrosion of alloy 22: experimental determination of model parameters from electrochemical impedance spectroscopy data. Metall. Mater. Trans. A 2005, 36A(5):1129-1141.
44. Norgren B.S., Somers M.A.J., Dewit J.H.W. Application of tougaard background subtraction to xps spectra of passivated Fe-17 Cr. Surf. Interface Anal. 1994, 21(6-7):378-381.
45. Biesinger M.C., Payne B.P., Grosvenor A.P., Lau L.W.M., Gerson A.R., Smart R.S.C. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni. Appl. Surf. Sci. 2011, 257(7):2717-2730.
46. Biesinger M.C., Brown C., Mycroft J.R., Davidson R.D., McIntyre N.S. X-ray photoelectron spectroscopy studies of chromium compounds. Surf. Interface Anal. 2004, 36(12):1550-1563.
47. Spevack P.A., McIntyre N.S. Thermal reduction of molybdenum trioxide. J. Phys. Chem. 1992, 96:9029-9035.
48. McIntyre N.S., Sunder S., Shoesmith D.W., Stanchell F.W. Chemical information from XPS-applications to the analysis of electrode surfaces. J. Vac. Sci. Technol. 1981, 18(3):714-721.
49. Schneider A., Kuron D., Hofmann S., Kirchheim R. AES analysis of pits and passive films formed on Fe-Cr, Fe-Mo and Fe-Cr-Mo alloys. Corros. Sci. 1990, 31:191-196.
50. Clayton C.R., Lu Y.C. A bipolar model of the passivity of stainless steel: the role of Mo addition. J. Electrochem. Soc. 1986, 133(12):2465-2473.
51. Zhang L., Macdonald D.D. Segregation of alloying elements in passive systems-I. XPS studies on the Ni-W system. Electrochim. Acta 1998, 43(18):2661-2671.
52. Ogle K., Baeyens J., Swiatowska J., Volovitch P. Atomic emission spectroelectrochemistry applied to dealloying phenomena: I. The formation and dissolution of residual copper films on stainless steel. Electrochim. Acta 2009, 54(22):5163-5170.
53. 4 environment. Corros. Sci. 1986, 26(1):49-54.
54. Ujiro T., Satoh S., Staehle R.W., Smyrl W.H. Effect of alloying Cu on the corrosion resistance of stainless steels in chloride media. Corros. Sci. 2001, 43(11):2185-2200.
55. 4. Mater. Sci. Eng., A 2004, 366(2):292-298.
56. Pourbaix Marcel. Atlas of Electrochemical Equilibria in Aqueous Solutions 1966, Pergamon Press, Cebelcor, Brussels.
57. Zadorozne N.S., Giordano C.M., Rodríguez M.A., Carranza R.M., Rebak R.B. Crevice corrosion kinetics of nickel alloys bearing chromium and molybdenum. Electrochim. Acta 2012, 76:94-101.
58. A.K. Mishra, D.W. Shoesmith, Effect of Alloying Elements on Crevice Corrosion Inhibition of Nickel-Chromium-Molybdenum-Tungsten Alloys under Aggressive Conditions: An Electrochemical Study, in press.