General corrosion of alloy 22: Experimental determination of model parameters from electrochemical impedance spectroscopy data

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 5, 2005, Pages 1129-1141

  McMillion, L Glen ^a   Sun, Adan ^c   MacDonald, Digby D ^c   Jones, D A ^b  

^a UNIVERSITY OF NEVADA   (United States)

^b Pennsylvania State University ^*  (United States)

^c PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CORROSION; CURRENT DENSITY; DATA REDUCTION; PARAMETER ESTIMATION; POINT DEFECTS; QUALITY ASSURANCE; SPECTROSCOPIC ANALYSIS;

BARRIER OXIDE LAYER; HIGH LEVEL NUCLEAR WASTE (HLNW); PASSIVE CURRENT DENSITY; POINT DEFECT MODEL (PDM);

RADIOACTIVE WASTES;

EID: 21244463965     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0206-0     Document Type: Conference Paper

References (54)

1. Civilian Radioactive Waste Management System, Management and Operating Contractor, Licensing Application Design Selection Report No. B00000000-01717-4606-00123, Revision 01, ICN 01, Civilian Radioactive Waste Management System, Management and Operating Contractor, Las Vegas, NV, 1999.
2. ASTM Standard B575, ASTM, West Conshohocken, PA, 2002, vol. 02.04.
3. D.S. Dunn and C.S. Brossia: Corrosion 2002 Symp., Denver, CO, Apr. 2002, NACE, Houston, TX, paper no. 02548.
4. F. Hua, J. Sarver, J. Jevec, and G. Gordon: Corrosion 2002 Symp., Denver, CO, Apr. 2002, NACE, Houston, TX, paper no. 02530.
5. Civilian Radioactive Waste Management System, Management and Operating Contractor, Civilian Radioactive Waste Management System, Management and Operating Contractor Report No. TDR-EBS-MD-000010, Revision 00, ICN 01, Las Vegas, NV, 2000.
6. Civilian Radioactive Waste Management System, Management and Operating Contractor, Civilian Radioactive Waste Management System, Management and Operating Contractor Report No. SDD-UDC-SE-000001, Revision 01, Las Vegas, NV, 2000.
7. G.O. Ilevbare, T. Lian, and J.C. Farmer: Corrosion 2002 Symp., Denver, CO, Apr. 2002, NACE, Houston, TX, paper no. 02539.
8. T.P. Moffatt, H. Yang, F.-R.F. Fan, and A.J. Bard: J. Electrochem. Soc., 1992, vol. 139 (11), pp. 3158-67.
9. M. Gojic, D. Marijan, and L. Kosec: Corrosion, 2000, vol. 56 (8), pp. 839-48.
10. T.B. Du: Br. Corr. J., 2002, vol. 37 (1), pp. 18-22.
11. K. Sugimoto, S. Matsuda, Y. Ogiwara, and K. Kitamura: J. Electrochem. Soc., 1985, vol. 132 (8), pp. 1791-95.
12. T.P. Moffatt and R.M. Latanision: J. Electrochem. Soc., 1992, vol. 139 (7), pp. 1869-79.
13. F. Falkenberg, V.S. Raja, and E. Ahlberg: J. Electrochem. Soc., 2001, vol. 148(4), pp. B123-B137.
14. M. Sakashita and N. Sato: Corr. Sci., 1977, vol. 17, p. 473.
15. R.C. Newman: Corr. Sci., 1985, vol. 25, p. 331.
16. I. Olefjord and B.O. Elfstrom: Corrosion, 1982, vol. 38, p. 46.
17. C.R. Clayton and Y.C. Lu: J. Electrochem. Soc., 1986, vol. 133, p. 2465.
18. K. Hashimoto, K. Asami, and K. Teramoto: Corr. Sci., 1979, vol. 19, p. 3.
19. G. Beranger: Proc. Int. Workshop, Cadarache, France, 2002, European Federation of Corrosion, Publications No. 36, Maney Publishing, London, 2003, pp. xiv-xx.
20. R.B. Rebak and P. Crook: "Influence of the Environment on the General Corrosion Rate of Alloy 22 (N06022)," PVP-Vol. 483, PVP2004-2793, Transportation, Storage, and Disposal of Radioactive Materials-2004, July 25-29, 2004, San Diego, CA.
21. D.D. Macdonald: Proc. Int. Workshop, Cadarache, France, 2002, European Federation of Corrosion, Publication No. 36, Maney Publishing, London, 2003, pp. 75-90.
22. L.L. Wong, D.V. Fix, J.C. Estill, R.D. McCright, and R.B. Rebak: Mater. Res. Soc. Symp. Proc., 2003, vol. 757.
23. E.J.W. Verwey. Physica 2, 1935, pp. 1059-1063.
24. N. Cabrera and N.F. Mott: Rep. Progr. Phys., 1948, vol. 12, pp. 163-84.
25. K.J. Vetter and F. Gorn: Electrochim. Acta, 1973, vol. 18, pp. 321-26.
26. N. Sato and M. Cohen: J. Electrochem. Soc., 1964, vol. 111 (5), pp. 512-19.
27. N. Sato and M. Cohen: J. Electrochem. Soc., 1964, vol. 111 (5), pp. 519-22.
28. R. Kirchheim: Electrochim. Acta, 1987, vol. 32 (11), pp. 1619-29.
29. C.Y. Chao, L.F. Lin, and D.D. Macdonald: J. Electrochem. Soc., 1981, vol. 128 (6), pp. 1187-94.
30. C.Y. Chao, L.F. Lin, and D.D. Macdonald: J. Electrochem. Soc., 1981, vol. 128 (6), pp. 1194-98.
31. Digby D. Macdonald: J. Electrochem. Soc., 1992, vol. 139 (12), pp. 3434-49.
32. Digby D. Macdonald, Sonia R. Biaggio, and Herking Song: J. Electrochem. Soc., 1992, vol. 139 (1), pp. 170-77.
33. Digby D. Macdonald and Mirna Urquidi-Macdonald: J. Electrochem. Soc., 1990, vol. 137 (8), pp. 2395-402.
34. Digby D. Macdonald: Pure Appl. Chem., 1999, vol. 17 (6), pp. 951-78.
35. D.D. Macdonald, Adan Sun, Namal Priyantha, and Palitha Jayaweera: J. Electroanalytical Chem., 2004, vol. 572 (2), pp. 421-31.
36. J.S. Llewelyn Leach and B.R. Pearson: Proc. 7th Int. Congr. on Metallic Corrosion, Rio de Janeiro, Oct. 1978, pp. 151-63.
37. Digby D. Macdonald: Proc. Symp. on Critical Factors in Localized Corrosion, G.S. Frankel and R.C. Newman, eds., The Electrochemical Society, 1992, vol. 92 (9).
38. Petra Keller and Hans-Henning Strehblow: Corr. Sci., 2004, vol. 46, pp. 1939-52.
39. M.F. Montemor, M.G.S. Ferreira, N.B. Hakiki, and M. Da Cunha Belo: Corr. Sci., 2000, vol. 42, pp. 1635-50.
40. Digby D. Macdonald: Pure Appl. Chem., 1999, vol. 17 (6), pp. 951-78.
41. ASTM International, Standard B575, ASTM, West Conshohocken, PA, 2002, vol. 02.04.
42. ASTM G 61-86 (reapproved 1998), ASTM, West Conshohocken, PA.
43. ASTM G5-94 (reapproved 1999), ASTM, West Conshohocken, PA.
44. ASTM E542-01, ASTM, West Conshohocken, PA.
45. G. Englehardt: OLI Systems, private communication, Morris Plains, NJ, 2004.
46. Reference Electrodes Theory and Practice, 1st ed., David J.G. Ives and George J. Janz, eds., Academic Press, New York, 1961, pp. 207-09.
47. Electrochemical Impedance: Analysis and Interpretation, John R. Scully, David C. Silverman, and Martin W. Kendig, eds., ASTM, Philadelphia, PA, 1993, pp. 115-70.
48. L.G. McMillion: Ph.D. Dissertation, University of Nevada, Reno, NV, 2004.
49. V.A. Alves and C.M.A. Brett: Electrochim. Acta, 2002, vol. 47, pp. 2081-91.
50. ASTM G102-89 (reapproved 1999), ASTM, West Conshohocken, PA.
51. M.A. Rodriguez, R. Carranza, and R. Rebak: Corrosion 2004, NACE, Houston, TX, paper no. 04700.
52. K.J. Evans, L.L. Wong, and R. Rebak: "Determination of the Crevice Repassivation Potential of Alloy 22 by a Potentiodynamic-Galvanostatic- Potentiostatic Method," PVP-Vol. 483, Transportation, Storage, and Disposal of Radioactive Materials-2004, July 25-29, 2004, San Diego, CA, PVP2004-2794.
53. C.-Y. Chao, L.-F. Lin, and D. D. Macdonald: J. Electrochem. Soc. 1982, vol. 129, pp. 1874-79.
54. M. Bojinov, G. Fabricus, T. Laitinen, K. Makela, T. Saario, and G. Sundholm: Electrochim. Acta 2000, vol. 45, pp. 2029-48.