Modeling Reactions in Porous Media

Modeling and Simulation of Heterogeneous Catalytic Reactions

Volumn , Issue , 2011, Pages 149-186

  Keil, Frerich J ^a  

^a HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Carbon nanotubes; Chemisorption; Density functional theory; Dusty gas model; Effective medium theory; Kinetic Monte Carlo

Indexed keywords

EID: 84882156582     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527639878.ch5     Document Type: Chapter

References (253)

1. Metiu, H. (2008) Preface to special topic: a survey of some new developments in heterogeneous catalysis. J. Chem. Phys., 128, 182501.
2. Becker, E.R. and Pereira, C.J. (eds) (1993) Computer-Aided Design of Catalysts, Marcel Dekker, New York.
3. Hegedus, L.L. (ed.) (1987) Catalyst Design, John Wiley & Sons, Inc., New York.
4. Morbidelli, M., Gavriilidis, A., and Varma, A. (2001) Catalyst Design: Optimal Distribution of Catalyst in Pellets, Reactors and Membranes, Cambridge University Press, Cambridge, UK.
5. Bell, A.T. (1990) Impact of catalyst science on catalyst design and development. Chem. Eng. Sci., 45, 2013-2026.
6. Gates, B.C. and Knoezinger, H. (eds) (2000) Impact of Surface Science on Catalysis, Academic Press, New York.
7. Reuter, K. and Scheffler, M. (2006) First-principles kinetic Monte Carlo simulations for heterogeneous catalysis: application to the CO oxidation at RuO2(110). Phys. Rev. B, 73, 045433.
8. Cinquini, F., Di Valentin, C., Finazzi, E., Giordano, L., and Pacchioni, G. (2007) Theory of oxides surfaces, interfaces and supported nano-clusters. Theor. Chem. Acc., 117, 827-845.
9. Stampfl, C. (2005) Surface processes and phase transitions from ab initio atomistic thermodynamics and statistical mechanics. Catal. Today, 105, 17-35.
10. Stampfl, C. (2007) Predicting surface phase transitions from ab initio based statistical mechanics and thermodynamics. Phase Transit., 80, 311-332.
11. Somorjai, G.A. and Park, J.Y. (2008) Evolution of the surface science of catalysis from single crystals to metal nanoparticles under pressure. J. Chem. Phys., 128, 182504.
12. Woodruff, D.P. and Delchar, T.A. (1994) Modern Techniques of Surface Science, 2nd edn, Cambridge University Press, Cambridge.
13. Niemantsverdriet, J. (2000) Spectroscopy in Catalysis: An Introduction, 2nd edn, John Wiley & Sons, Inc., New York.
14. Kolasinski, K.W. (2002) Surface Science: Foundations of Catalysis and Nanoscience, John Wiley & Sons, Inc., New York.
15. de Avila Arturo Soler-Illia, G.J., Sanchez, C., Lebeau, B., and Patarin, J. (2004) Chemical strategies to design textured materials: from microporous and mesoporous oxides to nanonetworks and hierarchical structures. Chem. Rev., 102, 4093-4138.
16. Thomas, J.M. (2008) Heterogeneous catalysis: enigmas, illusions, challenges, realities, and emergent strategies of design. J. Chem. Phys., 128, 182502.
17. Hellmann, A., Baerends, E.J., Biczysko, M., Bligaard, T., Christensen, C.H., Clary, D.G., Dahl, S., van Harrevelt, R., Honkala, K., Johnsson, H., Kroes, G.J., Luppi, M., Manthe, U., Norskov, J.K., Olsen, R.A., Rossmeisl, J., Skulason, E., Tautermann, C.S., Varandas, A.J.C., and Vincnet, J.K. (2006) Predicting catalysis: understanding ammonia synthesis from first-principles calculations. J. Phys. Chem. B, 110, 17719-17735.
18. Norskov, J.K., Scheffler, M., and Toulhat, H. (2006) Density functional theory in surface science and heterogeneous catalysis. MRS Bull., 31, 669-674.
19. van Santen, R.A. and Neurock, M. (2006) Molecular Heterogeneous Catalysis: A Conceptual and Computational Approach, John Wiley & Sons, Inc., New York.
20. Heyden, A., Bell, A.T., and Keil, F.J. (2005) Efficient methods for finding transition states in chemical reactions: comparison of improved dimer method and partitioned rational function optimization method. J. Chem. Phys., 123, 224101.
21. Heyden, A., Bell, A.T., and Keil, F.J. (2005) Kinetic modeling of nitrous decomposition on Fe-ZSM-5 based on parameters obtained from firstprinciples calculations. J. Catal., 233, 26-35.
22. Brüggemann, T.C. and Keil, F.J. (2008) Theoretical investigation of the selective catalytic reduction of nitric oxide with ammonia of H-form zeolites. J. Phys. Chem. C, 112, 17378-17387.
23. Brüggemann, T.C. and Keil, F.J. (2009) Theoretical investigation of the selective catalytic oxidation of ammonia of H-form zeolites. J. Phys. Chem. C, 113, 13860-13876.
24. Brüggemann, T.C., Przybylski, M.-D., Balaji, S.P., and Keil, F.J. (2010) Theoretical investigation of the selective catalytic reduction of nitric dioxide with ammonia of H-form zeolites andthe role of nitric and nitrous acids as intermediates. J. Phys. Chem. C, 114, 6567-6587.
25. Masel, R.I. (1996) Principles of Adsorption and Reaction on Solid Surfaces, John Wiley & Sons, Inc., New York.
26. Masel, R.I. (2001) Chemical Kinetics and Catalysis, John Wiley & Sons, Inc., New York.
27. van Santen, R.A., van Leeuwen, P.W.N.M., Averill, B.A., and Moulijn, J.A. (1999) Catalysis: An Integrated Approach, 2nd edn, vol., 123, Studies in Surface Science and Catalysis, Elsevier, Amsterdam.
28. Groß, A. (2003) Theoretical Surface Science: A Microscopic Perspective, Springer, New York.
29. Rudzinski,W., Nieszporek, K., Moon, H., and Rhee, H.-K. (1994) Fundamentals of mixed-gas adsorption on heterogeneous solid surfaces. Hetero. Chem. Rev., 1, 275-308.
30. Mezaki, R. and Inoue, H. (1991) Rate Equations of Solid-Catalyzed Reactions, University of Tokyo Press, Tokyo.
31. Froment, G.F. and Bischoff, K.B. (1990) Chemical Reactor Analysis and Design, 2nd edn, John Wiley & Sons, Inc., New York.
32. Chorkendorff, I. and Niemantsverdriet, J.W. (2003) Concepts of Modern Catalysis and Kinetics, John Wiley & Sons, Inc., New York.
33. Nilsson, A., Petterson, L.G.M., and Norskov, J. (eds) (2007) Chemical Bonding at Surfaces and Interfaces, Elsevier, Amsterdam.
34. Lanzani, G., Martinazzo, R., Materzanini, G., Pini, J., and Tantardini, G.F. (2007) Chemistry at surfaces: from ab initio to quantum dynamics. Theor. Chem. Acc., 117, 805-825.
35. Ertl, G., Knoezinger, H., Schüth, F., and Weitkamp, J. (2008) Handbook of Heterogeneous Catalysis, 2nd edn, Wiley-VCH Verlag GmbH, Weinheim.
36. Somorjai, G.A. (2010) Introduction to Surface Chemistry and Catalysis, 2nd edn, John Wiley & Sons, Inc., New York.
37. Baker, J. (1986) An algorithm for the location of transition states. J. Comput. Chem., 7, 385-395.
38. Banerjee, A., Adams, N., Simons, J., and Shepard, R. (1985) Search for stationary points on surfaces. J. Phys. Chem., 89, 52-57.
39. Henkelman, G., Uberuaga, B.P., and Jonsson, H. (2000) A climbing image nudge elastic band method for finding saddle points and minimum energy paths. J. Chem. Phys., 113, 9901-9904.
40. Heyden, A., Peters, B., Bell, A.T., and Keil, F.J. (2005) A comprehensive DFT study on nitrous oxide decomposition over Fe-ZSM-5. J. Phys. Chem. B, 109, 1857-1873.
41. Peters, B., Heyden, A., Bell, A.T., and Chakraborty, A. (2004) A growing string method for determining transition states: comparison to the nudged elastic band and string methods. J. Chem. Phys., 120, 7877-7886.
42. Sheppard, D., Terrell, R., and Henkelman, G. (2008) Optimization methods for finding minimum energy paths. J. Chem. Phys., 128, 134106.
43. Truhlar, D.G., Garrett, B.C., and Klippenstein, S.J. (1996) Current Status of Transition-State Theory. J. Phys. Chem., 100, 12771-12800.
44. Broadbelt, L.J. and Snurr, R.Q. (2000) Applications of molecular modeling in heterogeneous catalysis research. Appl. Catal. A, 200, 23-46.
45. Kjelstrup, S., Bedeaux, D., and Johannessen, E. (2006) Elements of Irreversible Thermodynamics for Engineers, 2nd edn, Tapir Academic Press, Trondheim.
46. Kohn, W. and Sham, L. (1965) Self-consistent equations including exchange and correlation effects. Phys. Rev. A, 14, 1133-1138.
47. Parr, R.G. and Yang, W. (1989) Density Functional Theory of Atoms and Molecules, Oxford University Press, Oxford.
48. Kohanoff, J. (2006) Electronic Structure Calculations for Solids and Molecules, Cambridge University Press,Cambridge.
49. Martin, R. (2004) Electronic Structure: Basic Theory and Practical Methods, Cambridge University Press,Cambridge.
50. Kaxiras, E. (2003) Atomic and Electronic Structure of Solids, Cambridge University Press, Cambridge.
51. von Barth, U. (2004) Basic density functional theory: an overview. Phys. Scr., T109, 9-39.
52. Langreth, D.C., Dion, M., Rydberg, H., Schröder, E., Hyldgaard, P., and Lundqvist, B.I. (2005) Van der Waals density functional theory with applications. Int. J. Quantum Chem., 101, 599-610.
53. Thonhauser, T., Cooper, V.R., Li, S., Puzder, A., Hyldgaard, P., and Langreth, D.C. (2007) Van der Waals density functional: self-consistent potential and the nature of the van der Waals bond. Phys. Rev. B, 76, 125112.
54. Helgaker, T., Jorgensen, P., and Olsen, J. (2002) Molecular Electronic-Structure Theory, John Wiley & Sons, Inc., New York.
55. Tuma, C. and Sauer, J. (2006) Treating dispersion effects in extended systems by hybrid MP2: DFT calculations -protonation of isobutene in zeolite ferrierite. Phys. Chem. Chem. Phys., 8, 3955-3965.
56. Hansen, N., Kerber, T., Sauer, J., Bell, A.T., and Keil, F.J. (2010) Quantum chemical modeling of benzene ethylation over H-ZSM-5 approaching chemical accuracy: a hybrid MP2:DFTstudy. J. Am. Chem. Soc., 132, 11525-11538.
57. Szabo, A. and Ostlund, N.S. (1996) Modern Quantum Chemistry: An Introduction to Advanced Electronic Structure Theory, Dover Publications, Mineola, NY.
58. Allen, M.P. and Tildesley, D.J. (1993) Computer Simulation of Liquids, Clarendon Press, Oxford.
59. Tuckerman, M.E. and Martyna, G.J. (2000) Understanding modern molecular dynamics: techniques and applications. J. Phys. Chem. B, 104, 159-178.
60. Frenkel, D. and Smit, B. (2001) Understanding Molecular Simulation, 2nd edn, Academic Press, New York.
61. Leach, A. (2001) Molecular Modelling, Prentice hall, New York.
62. Rapaport, D.C. (2004) The Art of Molecular Dynamics Simulations, 2nd edn, Cambridge University Press,Cambridge.
63. Thijsen, J.M. (2007) Computational Physics, 2nd edn, Cambridge University Press, Cambridge.
64. Landau, D.P. and Binder, K. (2005) A Guide to Monte Carlo Simulations in Statistical Physics, 2nd edn, Cambridge University Press, Cambridge.
65. Raimondeau, S. and Vlachos, D.G. (2002) Recent developments on multiscale, hierarchical modeling of chemical reactors. Chem. Eng. J., 90, 3-23.
66. Vlachos, D.G. (2005) A review of multiscale analysis: examples from systems biology, materials engineering, and other fluid-surface interacting systems. Adv. Chem. Eng., 30, 1-61.
67. Berendsen, H.J.C. (2007) Simulating the PhysicalWorld:Hierarchical Modeling from Quantum Mechanics to Fluid Dynamics, Cambridge University Press,Cambridge.
68. Santiso, E. and Gubbins, K.E. (2004) Multi-scale molecular modeling of chemical reactivity. Mol. Simul., 30, 699-748.
69. Lerou, J.J. and Ng, K.M. (1996) Chemical reaction engineering: a multiscale approach to a multiobjective task. Chem. Eng. Sci., 51, 1595-1614.
70. Hansen, N., Krishna, R., van Baten, J.M., Bell, A.T., and Keil, F.J. (2010) Reactor simulation of benzene ethylation and ethane dehydrogenation catalyzed by ZSM-5: a multiscale approach. Chem. Eng. Sci., 65, 2472-2480.
71. Wheeler, A. (1951) Reaction rates and selectivity in catalyst pores. Adv. Catal., 3, 249-327.
72. Do, D.D. (1998) Adsorption Analysis: Equilibria and Kinetics, Imperial College Press, London.
73. Carman, P.C. (1937) Fluid flow through granular beds. Trans. Inst. Chem. Eng., 17, 150-166.
74. Johnson, M.F. and Stewart, W.E. (1965) Pore structure and gaseous diffusion in solid catalysts. J. Catal., 4, 248-252.
75. Wakao, N. and Smith, J.M. (1962) Diffusion in catalyst pellets. Chem. Eng. Sci., 17, 825-834.
76. Foster, R.N. and Butt, J.B. (1966) A computational model for the structure of porous materials employed in catalysis. AIChE J., 12, 180-185.
77. Mann, R. and Thomson, G. (1987) Deactivation of a supported zeolite catalyst: simulation of diffusion, reaction and coke deposition in a parallel bundle. Chem. Eng. Sci., 42, 555-563.
78. Epstein, N. (1989) On tortuosity and the tortuosity factor in flow and diffusion through porous media. Chem. Eng. Sci., 44, 777-779.
79. Sharratt, P.N. and Mann, R. (1987) Some observations on the variation of tortuosity with Thiele modulus and pore size distribution. Chem. Eng. Sci., 42, 1565-1576.
80. Wicke, E. and Kallenbach, R. (1941) Surface diffusion of carbon monoxide in active carbons. Kolloidzeitschrift, 97, 135-151 (in German).
81. Feng, C. and Stewart, W.E. (1973) Practical models for isothermal diffusion and flow of gases in porous solids. Ind. Eng. Chem. Fund., 12, 143-147.
82. Wang, C.-T. and Smith, J.M. (1983) Tortuosity factors for diffusion in catalyst pellets. AIChE J., 29, 132-136.
83. Jackson, R. (1977) Transport in Porous Catalysts, Elsevier, Amsterdam.
84. Beeckmann, J.W. and Froment, G.F. (1980) Catalyst deactivation by site coverage and pore blockage. Finite rate of growth of the carbonaceous deposit. Chem. Eng. Sci., 35, 805-812.
85. Reyes, S. and Jensen, K.F. (1985) Estimation of effective transport coefficients in porous solids based on percolation concepts. Chem. Eng. Sci., 40, 1723-1734.
86. Stauffer, D. and Aharony, A. (1994) Introduction to Percolation Theory, 2nd edn (revised). Taylor & Francis, London.
87. Hoshen, J. and Kopelman, R. (1976) Percolation cluster distribution. I. Cluster multiple labeling technique and critical concentration algorithm. Phys. Rev. B, 24, 3438-3445.
88. Sahimi, M., Gavalas, G.R., and Tsotsis, T.T. (1990) Statistical and continuum models of fluid solid reactions in porous media. Chem. Eng. Sci., 45, 1443-1502.
89. Sahimi, M. and Tsotsis, T.T. (2003) Molecular pore network models of nanoporous materials. Physica B, 338, 291-297.
90. Sahimi, M. (1994) Applications of Percolation Theory, Taylor & Francis, London.
91. Fisher, M.E. (1971) The theory of critical point singularities, in Critical Phenomena (ed. M.S.Green) (Proceedings of the 1970 Enrico Fermi International School of Physics), Academic Press, New York, pp. 1-99.
92. Mohanty, K.K., Ottino, J.M., and Davis, H.T. (1982) Reaction and transport in disordered composite media: introduction of percolation concepts. Chem. Eng. Sci., 37, 905-924.
93. Voronoi, G. (1908) Novel applications of continuous parameters on the theory of quadratic forms. J. Reine Angew Math., 134, 198-287 (in French).
94. Winterfeld, P.H., Scriven, L.E., and Davis, H.T. (1981) Percolation and conductivity of random two-dimensional composites. J. Phys. Chem., 14, 2361-2376.
95. Okabe, A., Boots, B., and Sugihara, K. (1992) Spatial Tessellations: Concepts and Applications of Voronoi Diagrams, John Wiley & Sons, Inc., New York.
96. Reyes, S.C. and Iglesia, E. (1991) Effective diffusivities in catalyst pellets: new model porous structures and transport simulation techniques. J. Catal., 129, 457-472.
97. Drewry, H.P.G. and Seaton, N.A. (1995) Continuum random walk simulations of diffusion and reaction in catalyst particles. AIChE J., 41, 880-893.
98. Jerauld, G.R.,Hatfield, J.C., Scriven, L.E., and Davis, H.T. (1984) Percolation and conduction on Voronoi and triangular networks: a case study in topological disorder. J. Phys. C, 17, 1519-1529.
99. Hollewand, M.P. and Gladden, L.F. (1992) Modeling of diffusion and reaction in porous catalysts using a random three-dimensional network model. Chem. Eng. Sci., 47, 1761-1770.
100. Hollewand, M.P. and Gladden, L.F. (1992) Representation of porous catalysts using random pore networks. Chem. Eng. Sci., 47, 2757-2762.
101. Hollewand, M.P. and Gladden, L.F. (1995) Transport heterogeneity in porous pellets: I. PGSENMRstudies. Chem. Eng. Sci., 50 (2), 309-326.
102. Hollewand, M.P. and Gladden, L.F. (1995) Transport heterogeneity in porous pellets: II. NMR imaging studies under transient and steady-state conditions. Chem. Eng. Sci., 50 (2), 327-344.
103. Aris, R. (1975) The Mathematical Theory of Diffusion and Reaction in Permeable Catalysts, vol. 2, Clarendon Press, Oxford.
104. Dullien, F.A.L. (1992) PorousMedia: Fluid Transport and Pore Structure, 2nd edn, Academic Press, New York.
105. Torquato, S. (2002) Random Heterogeneous Materials: Microstructure and Macroscopic Properties, Springer, New York.
106. Mann, R. (1993) Development in chemical reaction engineering: issues relating to particle pore structures and porous materials. Trans. IChem E (Part A), 71, 551-562.
107. Sahimi, M. (2003) Heterogeneous Materials. I. Linear Transport and Optical Properties, Springer, New York.
108. Rolison, D.R. (2003) Catalytic nanoarchitectures: the importance of nothing and the unimportance of periodicity. Science, 299, 1698-1701.
109. Keil, F.J. (1996) Modelling of phenomena within catalyst particles. Chem. Eng. Sci., 51, 1543-1567.
110. Keil, F.J. (1999) Diffusion and reaction in porous networks. Catal. Today, 53, 245-258.
111. Keil, F. (1999) Diffusion and Chemical Reactions in Gas/Solid Catalysis, Springer, New York (in German).
112. Burganos, V.N. and Sotirchos, S.V. (1987) Diffusion in pore networks: effective medium theory and smooth field approximation. AIChE J., 33, 1678-1689.
113. Gregg, S.J. and Sing, K.S. (1982) Adsorption, Surface Area and Porosity, 2nd edn, Academic Press, London.
114. Zgrablich, G., Mendioroz, S., Daza, L., Pajares, J., Mayagoita, V., Rojas, F., and Conner, W.C. (1991) Effect of porous structure on the determination of pore size distribution by mercury porosimetry and nitrogen sorption. Langmuir, 7, 779-785.
115. Conner, W.C., Christensen, S., Topsoe, H., Ferrero, M., and Pullen, A. (1994) The estimation of pore-network dimensions and structure: analysis of sorption and comparison with porosimetry. Stud. Surf. Sci. Catal., 87, 151-163.
116. Groen, J.C., Peffer, L.A.A., and Pérez-Ramirez, J. (2003) Pore size determination in modified micro-and macroporous materials. Pitfalls and limitations in gas adsorption data analysis. Micropor. Mesopor. Mater., 60, 1-17.
117. Seaton, N.A. (1991) Determination of the connectivity of porous solids from nitrogen sorption measurements. Chem. Eng. Sci., 46, 1895-1909.
118. Liu, H., Zhang, L., and Seaton, N.A. (1992) Determination of the connectivity of porous solids from nitrogen sorption measurements: II. Generalisation. Chem. Eng. Sci., 47, 4393-4404.
119. Naumov, S., Valiullin, R., Kärger, J., Pithcumani, R., and Coppens, M.-O. (2008) Tracing pore connectivity and architecture in nanostructured silica SBA-15. Micropor. Mesopor. Mater., 110, 37-40.
120. Calo, J.M. and Hall, P.J. (2004) The application of small angle scattering techniques to porosity characterization in carbons. Carbon, 42, 1299-1304.
121. Adler, P.M. (1992) Porous Media: Geometry and Transport, Butterworth-Heinemann, Stoneham.
122. Yeong, C.L.Y. and Torquato, S. (1998) Reconstructing porous media. Phys. Rev. E, 57, 495-506.
123. Yeong, C.L.Y. and Torquato, S. (1998) Reconstructing porous media. Phys. Rev. E, 58, 224-233.
124. Meyerhoff, K. and Hesse, D. (1997) Determination of effective macropore diffusion coefficients by digital image processing. Chem. Eng. Technol., 20, 230-239.
125. Manwart, C. and Hilfer, R. (1999) Reconstruction of random media using Monte Carlo methods. Phys. Rev. E, 59, 5596-5599.
126. Gelb, L.D. and Gubbins, K.E. (1998) Characterization of porous glasses: simulation models, adsorption isotherms, and the Brunauer-Emmettt-Teller analysis method. Langmuir, 14, 2097-2111.
127. Gelb, L.D. and Gubbins, K.E. (1999) Characterization of porous glasses: simulation models, adsorption isotherms, and the Brunauer-Emmettt-Teller analysis method. Langmuir, 15, 305-308.
128. Mandelbrot, B.B. (1983) The Fractal Geometry of Nature, 2nd edn, Freeman, San Francisco.
129. Avnir, D. (ed.) (1989) The FractalApproach to Heterogeneous Chemistry, John Wiley & Sons, Ltd, Chichester.
130. Coppens, M.-O. and Froment, G.F. (1994) Diffusion and reaction in a fractal catalyst pore: III. Application to the simulation of vinyl acetate production. Chem. Eng. Sci., 49, 4897-4907.
131. Coppens, M.-O. and Froment, G.F. (1995) Diffusion and reaction in a fractal catalyst pore: I. Geometrical aspects. Chem. Eng. Sci., 50, 1013-1026.
132. Coppens, M.-O. and Froment, G.F. (1997) The effectiveness of mass fractal catalysts. Fractals, 5, 493-505.
133. Coppens, M.-O. (1999) The effect of fractal surface roughness on diffusion and reaction in porous catalysts: from fundamentals to practical applications. Catal. Today, 53, 225-243.
134. Coppens, M.-O. (2005) Scaling up and down in a nature inspired way. Ind. Eng. Chem., 44, 5011-5019.
135. Coppens, M.-O. and Wang, G. (2009) Optimal design of hierarchically structured porous catalysts, in Design of Heterogeneous Catalysts (ed. U. Ozkan), John Wiley & Sons, Inc., New York.
136. Gutfraind, R., Sheintuch, M., and Avnir, D. (1991) Fractal and multifractal analysis of the sensitivity of catalytic reactions to catalyst structure. J. Chem. Phys., 95, 6100.
137. Havlin, S. and Ben-Avraham, D. (2002) Diffusion in disordered media. Adv. Phys., 51 (1), 187-292.
138. Sheintuch, M. (2001) Reaction engineering principles of processes catalyzed by fractal solids. Catal. Rev. Sci. Eng., 43, 233-289.
139. Malek, K. and Coppens, M.-O. (2001) Effects of surface roughness on self-and transport diffusion in porous media in the Knudsen regime. Phys. Rev. Lett., 87, 125505.
140. Feng, C.F., Kostrov, V.V., and Stewart, W.E. (1974) Multi-component diffusion of gases in porous solids: models and experiments. Ind. Eng. Chem. Fund., 13, 5-9.
141. Rieckmann, C. and Keil, F.J. (1999) Simulation and experiment of multicomponent diffusion and reaction in three-dimensional networks. Chem. Eng. Sci., 54, 3485-3493.
142. Reyes, S.C., Sinfelt, J.H., and DeMartin, G.J. (2000) Diffusion in porous solids: the parallel contribution of gas and surface diffusion processes in pores extending from the mesoporous region into the microporous region. J. Phys. Chem. B, 104, 5750-5761.
143. Skoulidas, A.I. and Sholl, D.S. (2001) Direct tests of the Darken approximation for molecular diffusion in zeolites using equilibrium molecular dynamics. J. Phys. Chem. B, 105, 3151-3154.
144. Snyder, M.A. and Vlachos, D.G. (2005) The role of molecular interactions and interfaces in diffusion: transport diffusivity and evaluation of the Darken approximation. J. Chem. Phys., 123, 184707.
145. Skoulidas, A.I. and Sholl, D.S. (2003) Molecular dynamics simulations of self-diffusivities, corrected diffusivities, and transport diffusivities of light gases in four silica zeolites to assess influences of pore shape and connectivity. J. Phys. Chem. A, 107, 10132-10141.
146. Kärger, J. and Ruthven, D.M. (1992) Diffusion in Zeolites and Other Microporous Solids, John Wiley&Sons, Inc., New York.
147. Cunningham, R.E. and Williams, R.J.J. (1980) Diffusion in Gases and Porous Media, Plenum Press, New York.
148. Evans, R.B., Watson, G.M., and Mason, E.A. (1961) Gaseous diffusion in porous media at uniform pressure. J. Chem. Phys., 35, 2076-2083.
149. Evans, R.B., Watson, G.M., and Mason, E.A. (1962) Gaseous diffusion in porous media. II: effects of pressure gradients. J. Chem. Phys., 36, 1894-1902.
150. Mason, E.A. and Malinauskas, A.P. (1983) Gas Transport in Porous Media: The Dusty Gas Model, Elsevier, Amsterdam.
151. Rothwell, L.B. (1963) Gaseous counterdiffusion in catalyst pellets. AIChE J., 9, 19-24.
152. Schneider, P. (1978) Multicomponent isothermal diffusion and forced flow of gases in capillaries. Chem. Eng. Sci., 33, 1311-1319.
153. Arnost, D. and Schneider, P. (1995) Dynamic transport of multicomponent mixtures of gases in porous solids. Chem. Eng. J., 57, 91-99.
154. Kerkhof, P.J.A.M. (1996) A modified Maxwell-Stefan model for transport through inert membranes: the binary friction model. Chem. Eng. J., 64, 319-343.
155. Kerkhof, P.J.A.M. and Geboers, M.A.M. (2005) Toward a unified theory of isotropic molecular transport phenomena. AIChE J., 51, 79-121.
156. Young, J.B. and Todd, B. (2005) Modelling of multi-component gas flows in capillaries and porous solids. Int. J. Heat Mass Transf., 48, 5338-5353.
157. Kjelstrup, S. and Bedeau, D. (2008) Non-Equilibrium Thermodynamics of Heterogeneous Systems, World Scientific, Singapore.
158. Düren, T., Keil, F.J., and Seaton, N.A. (2002) Molecular simulation of adsorption and transport diffusion of model fluids in carbon nanotubes. Mol. Phys., 100, 3741-3751.
159. Auerbach, S.M. (2000) Theory and simulation of jump dynamics, diffusion and phase equilibrium in nanopores. Int. Rev. Phys. Chem., 19, 155-198.
160. Keil, F.J., Krishna, R., and Coppens, M.-O. (2000) Modeling of diffusion in zeolites. Rev. Chem. Eng., 16, 71-197.
161. Sholl, D.S. (2006) Understanding macroscopic diffusion of adsorbed molecules in crystalline nanoporous materials via atomistic simulations. Acc. Chem. Res., 39, 403-411.
162. Dubbeldam, D. and Snurr, R. (2007) Recent developments in the molecular modeling of diffusion in nanoporous materials. Mol. Simul., 33, 305-324.
163. Smit, B. and Maesen, T. (2008) Molecular simulations of zeolites: adsorption, diffusion, and shape selectivity. Chem. Rev., 108, 4125-4184.
164. Dubbeldam, D., Beerdsen, E., Vlugt, T.J.H., and Smit, B. (2005) Molecular simulation of loading-dependent diffusion in nanoporous materials using extended dynamically corrected transition state theory. J. Chem. Phys., 122, 224712.
165. Beerdsen, E., Dubbeldam, D., and Smit, B. (2006) Understanding diffusion in nanoporous materials. Phys. Rev. Lett., 96, 044501.
166. Beerdsen, E., Dubbeldam, D., and Smit, B. (2006) Loading dependence of the diffusion coefficient of methane in nanoporous materials. J. Phys. Chem. B, 110, 22754-22772.
167. Demontis, P. and Suffritti, G. (1997) Structure and dynamics of zeolites investigated by molecular dynamics. Chem. Rev., 97, 2845-2878.
168. Fritzsche, S., Wolfsberg, M., and Haberlandt, R. (2003) The importance of various degrees of freedom in the theoretical study of the diffusion of methane in silicalite-1. Chem. Phys., 289, 321-333.
169. Leroy, F., Rousseau, B., and Fuchs, A.H. (2004) Self-diffusion of n-alkanes in silicalite using molecular dynamics simulation: a comparison between rigid and flexible frameworks. Phys. Chem. Chem. Phys., 6, 775-783.
170. Zimmermann, N.E.R., Jakobtorweihen, S., Beerdsen, E., Smit, B., and Keil, F.J. (2007) In-depth study of the influence of host-framework flexibility on the diffusion of small gas molecules in one-dimensional zeolitic pore systems. J. Phys. Chem. C, 111, 17370-17381.
171. Jakobtorweihen, S., Keil, F.J., and Smit, B. (2006) Temperature and size effects on diffusion in carbon nanotubes. J. Phys. Chem. B, 110, 16332-16336.
172. Krishna, R. and van Baten, J.M. (2005) Diffusion of alkane mixtures in zeolites. Validating the Maxwell-Stefan formulation using MD simulations. J. Phys. Chem. B, 109, 6386-6396.
173. Krishna, R. and van Baten, J.M. (2008) Onsager coefficients for binary mixture diffusion in nanopores. Chem. Eng. Sci., 63, 3120-3140.
174. Krishna, R. and van Baten, J.M. (2008) Insights into diffusion of gases in zeolites gained from molecular dynamics simulation. Micropor. Mesopor. Mater., 109, 91-108.
175. Skoulidas, A.I., Sholl, D.S., and Krishna, R. (2003) Correlation effects in diffusion of CH4/CF4 mixtures in MFI zeolite. A study linking MD simulations with the Maxwell-Stefan formulation. Langmuir, 19, 7977-7988.
176. Krishna, R., Pascheck, D., and Baur, R. (2004) Modeling the occupancy dependence of diffusivities in zeolites. Micropor. Mesopor. Mater., 76, 233-246.
177. Rao, M.B. and Sircar, S. (1999) Thermodynamic consistency for binary gas adsorption equilibria. Langmuir, 15, 7258-7267.
178. Krishna, R. and Baur, R. (2005) On the Langmuir-Hinshelwood formulation for zeolite catalysed reactions. Chem. Eng. Sci., 60, 1155-1166.
179. Ternel, B., Meskine, H., Reuter, K., Scheffler, M., and Metiu, H. (2007) Does phenomenological kinetics provide an adequate description of heterogeneous catalytic reactions? J. Chem. Phys., 126, 204711.
180. Corma, A., Llopis, F., Monton, J.B., and Weller, S. (1988) Comparison of models in heterogeneous catalysis for ideal and non-ideal surfaces. Chem. Eng. Sci., 43, 785-792.
181. Ostrovskii, V.E. (2004) Paradox of heterogeneous catalysis: paradox or regularity? Ind. Eng. Chem. Res., 43, 3113-3126.
182. Boudart, M. and Mariadassou, G.D. (1984) Kinetics of Heterogeneous Catalytic Reactions, Princeton University Press, Princeton, NJ.
183. Dumesic, J.A., Rudd, D.F., Aparacio, L.M., Rekoske, J.E., and Trevino, A.A. (1993) The Microkinetics of Heterogeneous Catalysis, American Chemical Society, Washington, DC.
184. Stoltze, P. (2000) Microkinetic simulation of catalytic reactions. Prog. Surf. Sci., 65, 65-150.
185. Garayhi, A. and Keil, F.J. (2001) Modeling of microkinetics in heterogeneous catalysis by means of frequency response techniques. Chem. Eng. J., 82, 329-346.
186. Keil, F.J. (2001) Development of microkinetic expressions by instationary methods. Stud. Surf. Sci. Catal., 133, 41-55.
187. Lynggaard, H., Andreasen, A., Stegelmann, C., and Stoltze, P. (2004) Analysis of simple kinetic models in heterogeneous catalysis. Prog. Surf. Sci., 77, 71-137.
188. Bligaard, T., Nørskov, J.K., Dahl, S., Matthiesen, J., Christensen, C.H., and Sehested, J. (2004) The Brønsted-Evans-Polanyi relation and the volcano curve in heterogeneous catalysis. J. Catal., 224, 206-217.
189. Lazo, C. and Keil, F.J. (2009) Thermodynamics from first principles: Phase diagram of oxygen adsorbed on Ni (111) and thermodynamic properties. Phys. Rev. B, 79, paper 245418.
190. Voter, A. (1997) Amethod for accelerating the molecular dynamics simulation of infrequent events. J. Chem. Phys., 106, 4665-4677.
191. Groot, R.D. and Warren, P.B. (1997) Dissipative particle dynamics: bridging the gap between atomistic and mesoscopic simulation. J. Chem. Phys., 107, 4423-4435.
192. Lowe, C.P. (1999) Analternative approach to dissipative particle dynamics. Europhys. Lett., 47, 145-151.
193. Damköhler, G. (1937) Influence of diffusion, fluid flow, and heat transport on the yield in chemical reactors, in Der Chemieingenieur, vol. 3 (Part 1) (eds A. Eucken and M. Jakob), Akademische Verlagsgesellschaft, Leipzig, pp. 359-485 (in German); English translation: Int. Chem. Eng. (1988), 28, 132-198.
194. Thiele, E.W. (1939) Relation between catalytic activity and size of particle. Ind. Eng. Chem., 31, 916-920.
195. Zeldovich, Ya. B. (1939) On the theory of reactions on powders and porous substances. Acta Phys., 10, 583-614.
196. Wicke, E. (1972) Physical phenomena in catalysis and in gas-solid surface reactions. Adv. Chem. Ser., 109, 183-208.
197. Schneider, P. (1975) Intraparticle diffusion in multicomponent catalytic reactions. Catal. Rev. Sci. Eng., 12, 201-278.
198. Burghardt, A. (1986) Transport phenomena and chemical reactions in porous catalysts for multicomponent and multireaction systems. Chem. Eng. Process., 21, 229-244.
199. Luss, D. (1987) Diffusion-reaction interactions in catalyst pellets, in Chemical Reaction and Reactor Engineering (eds J.J. Carberry and A. Varma), Marcel Dekker, New York.
200. Rieckmann, C. and Keil, F.J. (1997) Multicomponent diffusion and reaction in three-dimensional networks: general kinetics. Ind. Eng. Chem. Res., 36, 3275-3281.
201. Wood, J., Gladden, L.F., and Keil, F.J. (2002) Modelling of diffusion and reaction accompanied by capillary condensation using three-dimensional pore networks. Part 2: dusty gas model and general reaction kinetics. Chem. Eng. Sci., 57, 3047-3059.
202. Deepak, P.D. and Bhatia, S.K. (1994) Transport in capillary network models of porous media: theory and simulation. Chem. Eng. Sci., 49, 245-257.
203. Sotirchos, S.V. and Burganos, V.N. (1988) Analysis of multicomponent diffusion in pore networks. AIChE J., 34, 1106-1118.
204. Bischoff, K.B. (1965) Effectiveness factors for general reaction forms. AIChE J., 11, 351-355.
205. Kulkarni, B.D., Jayaraman, V.K., and Doraiswamy, L.K. (1981) Effectiveness factors in bidispersed catalysts: the general nth order case. Chem. Eng. Sci., 36, 943-945.
206. Zhang, L. and Seaton, N.A. (1992) Prediction of the effective diffusivity in pore networks close to a percolation threshold. AIChE J., 38, 1816-1824.
207. Zhang, L. and Seaton, N.A. (1994) The application of continuum equations to diffusion and reaction in pore networks. Chem. Eng. Sci., 49, 41-50.
208. Weisz, P.B. and Hicks, J.S. (1962) The behaviour of porous catalyst particles in view of internal mass and heat diffusion effects. Chem. Eng. Sci., 17, 265-275.
209. Kaza, K.R., Villadsen, J., and Jackson, R. (1980) Intraparticle diffusion effects in the methanation reaction. Chem. Eng. Sci., 35, 17-24.
210. Keil, F.J., Hinderer, J., and Garayhi, A.R. (1999) Diffusion and reaction in ZSM-5 and composite catalysts for the methanolto-olefines process. Catal. Today, 50, 637-650.
211. Dogu, T. (1998) Diffusion and reaction in catalyst pellets with bidisperse pore size distribution. Ind. Eng. Chem. Res., 37, 2158-2171.
212. Goettmann, F. and Sanchez, C. (2007) Howdoes confinement affect the catalytic activity of mesoporous materials. J.Mater. Chem., 17, 24-30.
213. Keil, F.J. and Coppens, M.-O. (2004) Dynamic Monte Carlo simulations of diffusion and reactions in zeolites, in Computer Modeling of Microporous Materials (eds C.R.A. Catlow, R.A. van Santen, and B. Smit), Elsevier, Amsterdam.
214. Turner, C.H., Brennan, J.K., Johnson, J.K., and Gubbins, K.E. (2002) Effect of confinement by porous materials on chemical reaction kinetics. J. Chem. Phys., 116, 2138-1248.
215. Turner, C.H., Brennan, J.K., Lisal, M., Smith, W.R., Johnson, J.K., and Gubbins, K.E. (2008) Simulation of chemical reaction equilibria by the reaction ensemble Monte Carlo method: a review. Mol. Simul., 34, 119-146.
216. Johnson, J.K., Panagiotopoulos, A.Z., and Gubbins, K.E. (1994) Reactive canonical Monte Carlo: a new simulation technique for reacting or associating fluids. Mol. Phys., 81, 717-733.
217. Smith, W.R. and Triska, B. (1994) The reaction ensemble method for the computer simulation of chemical and phase equilibria. J. Chem. Phys., 100, 3019-3027.
218. Hansen, N., Jakobtorweihen, S., and Keil, F.J. (2005) Reactive Monte Carlo and grand-canonical Monte Carlo simulations of the propene metathesis reaction system. J. Chem. Phys., 122, 164705.
219. Jakobtorweihen, S.,Hansen, N., and Keil, F.J. (2006) Combining reactive and configurational bias Monte Carlo: confinement influence on the propene metathesis reaction system in various zeolites. J. Chem. Phys., 125, 224709.
220. Smit, B. and Maesen, T.L.M. (2008) Towards a molecular understanding of shape selectivity. Nature, 451, 671-678.
221. Gounaris, C.E.,Wei, J., and Floudas, C.A. (2006) Rational design of shape selective separation and catalysis. Chem. Eng. Sci., 61, 7933-7962.
222. Hansen, N., Brüggemann, T., Bell, A.T., and Keil, F.J. (2008) Theoretical investigation of benzene alkylation with ethylene over H-ZSM-5. J. Phys. Chem. C, 112, 15402-15411.
223. Hansen, N., Krishna, R., van Baten, J.M., Bell, A.T., and Keil, F.J. (2009) Analysis of diffusion limitation in the alkylation of benzene over H-ZSM-5 by combining quantum chemical calculations, molecular simulations, and continuum approach. J. Phys. Chem. C, 113, 235-246.
224. Hegedus, L.L. and Pereira, C.J. (1990) Reaction engineering for catalyst design. Chem. Eng. Sci., 45, 2027-2044.
225. Hegedus, L.L. (1980) Catalyst pore structure by constrained nonlinear optimization. Ind. Eng. Chem. Prod. Res. Dev., 19, 533-537.
226. Keil, F.J. and Rieckmann, C. (1994) Optimization of three-dimensional catalyst pore structures. Chem. Eng. Sci., 49, 4811-4822.
227. El-Nafaty, U.A. and Mann, R. (1999) Support-pore architecture optimization in FCC catalyst particles using designed pore networks. Chem. Eng. Sci., 54, 3475-3484.
228. Prachayawarakorn, S. and Mann, R. (2007) Effects of pore assembly architecture on catalyst particle tortuosity and reaction effectiveness. Catal. Today, 128, 88-99.
229. Wang, G., Johannessen, E., Kleijn, C.R., de Leeuw, S.W., and Coppens, M.-O. (2007) Optimizing transport in nanostructured catalysts: a computational study. Chem. Eng. Sci., 62, 5110-5116.
230. Wang, G. and Coppens, M.-O. (2008) Calculation of the optimal macropore size in nanoporous heterogeneous catalysts and its application to DeNOx catalysis. Ind. Eng. Chem. Res., 37, 3847-3855.
231. Wang, G., Groen, J.C., Yue,W., Zhou,W., and Coppens, M.-O. (2008b) Facile synthesis of ZSM-5 composites with hierarchical porosity. J. Mater. Chem., 18, 468-474.
232. Wang, G. and Coppens, M.-O. (2010) Rational design of hierarchically structured porous catalysts for autothermal reforming of methane. Chem. Eng. Sci., 65,2344-2351
233. Gavriilidis, A., Varma, A., and Morbidelli, M. (1993) Optimal distribution of catalyst in pellets. Catal. Rev. Sci. Eng., 35, 399-456.
234. Davis, M.E. (2002) Ordered porous materials for emerging applications. Nature, 417, 813-821.
235. Hartmann, S., Brandhuber, D., and Hüsing, N. (2007) Glycol-modified silanes: novel possibilities for the synthesis of hierarchically organized (hybrid) porous materials. Acc. Chem. Res., 40, 885-894.
236. Schüth, F. (2005) Engineered porous catalytic materials. Annu. Rev.Mater. Res., 35, 209-238.
237. Taguchi, A. and Schüth, F. (2005) Ordered mesoporous materials in catalysis. Micropor. Mesopor. Mater., 77, 1-45.
238. Yuan, Z.-Y. and Su, B.-L. (2006) Insights into hierarchically meso-macroporous structured materials. J. Mater. Chem., 16, 663-677.
239. Zeng, H.C. (2006) Synthetic architecture of interior space for inorganic nanostructures. J. Mater. Chem., 16, 649-662.
240. Zhao, X.S., Su, F., Yan, Q., Guo, W., Bao, X.Y., Lo, L., and Zhou, Z. (2006) Templating methods for preparation of porous structures. J. Mater. Chem., 16, 637-648.
241. Groen, J.C., Moulijn, J.A., and Perez-Ramirez, J. (2006) Desilication: on the controlled generation of mesoporosity in MFI zeolites. J. Mater. Chem., 16, 2121-2131.
242. Cejka, J. and Mintova, S. (2007) Perspectives of micro/mesoporous composites in catalysis. Catal. Rev., 49, 457-509.
243. Egeblad, K., Christensen, C.H., and Kustova, M. (2008) Templating mesoporous zeolites. Chem. Mater., 20, 946-960.
244. Tao, Y.S., Kanoh, H., Abrams, L., and Kaneko, K. (2006) Mesopore-modified zeolites: preparation, characterization, and applications. Chem. Rev., 106, 896-910.
245. Hoffmann, F., Cornelius, M., Morell, J., and Fröba, M. (2006) Silica-based mesoporous organic-inorganic hybrid materials. Angew Chem., Int. Ed., 45, 3216-3251.
246. Marquez-Alvarez, C., Zilkova, N., Perez-Pariente, J., and Cejka, J. (2008) Synthesis, characterization and catalytic applications of organized mesoporous aluminas. Catal. Rev., 50, 222-286.
247. Stair, P.C. (2008) Advanced synthesis for advancing heterogeneous catalysis. J. Chem. Phys., 128, 182507.
248. Centi, G. and Perathoner, S. (2008) Catalysis by layered materials: a review. Micropor. Mesopor. Mater., 107, 3-15.
249. Kitagawa, S., Kitaura, R., and Noro, S.-I. (2004) Functional porous coordination polymers. Angew Chem., Int. Ed., 43, 2334-2375.
250. van Donk, S., Janssen, A.H., Bitter, J.H., and de Jong, K.P. (2003) Generation, characterization, and impact of mesopores in zeolite catalysts. Catal. Rev. Sci. Eng., 45, 297-319.
251. Stein, A. (2003) Advances in microporous and mesoporous solids: highlights of recent progress. Adv.Mater., 15, 763-775.
252. Carberry, J.J. (1962) The micro-macro effectiveness factor for the reversible catalytic reaction. AIChE J., 8, 557-558.
253. Ertl, G. (2000) Dynamics of Reactions at Surfaces (eds B. Gates and H. Knoezinger), Academic Press, New York.