Additive manufacturing (AM) and nanotechnology: Promises and challenges

Rapid Prototyping Journal

Volumn 19, Issue 5, 2013, Pages 353-364

  Ivanova, Olga ^a   Williams, Christopher ^b   Campbell, Thomas ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

^b Virginia Polytechnic Institute and State University   (United States)

Author keywords

3D printing; Additive manufacturing; Additives; Nanocomposite; Nanotechnology; Printing industry

Indexed keywords

3-D PRINTING; ADDITIVE MANUFACTURING; CARBON NANO-MATERIALS; INHERENT LIMITATIONS; LASER SINTERING; PRINTING INDUSTRY; SCIENCE AND TECHNOLOGY; THREE-DIMENSIONAL PRINTING;

LASER HEATING; MANUFACTURE; NANOCOMPOSITES; NANOSTRUCTURED MATERIALS; NANOTECHNOLOGY; PRINTING; RESEARCH;

ADDITIVES;

EID: 84881407567     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/RPJ-12-2011-0127     Document Type: Article

References (68)

1. Ahn, B.Y., Duoss, E.B., Motala, M.J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R.G., Rogers, J.A. and Lewis, J.A. (2009), " Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes", Science, Vol. 323, pp. 1590-1593.
2. Alivisatos, A.P. (1996), "Semiconductor clusters, nanocrystals, and quantum dots", Science, Vol. 271, pp. 933-937. (Pubitemid 126554899)
3. Alivisatos, A.P., Gu, W. and Larabell, C. (2005), "Quantum dots as cellular probes", Annu. Rev. Mater. Res., Vol. 7, pp. 55-76. (Pubitemid 41170185)
4. Andrews, R., Jacques, D., Qian, D. and Rantell, T. (2002), "Multiwall carbon nanotubes: synthesis and application", Accounts Chem. Res., Vol. 35, pp. 1008-1017.
5. Athreya, S.R., Kalaitzidou, K. and Das, S. (2010), "Processing and characterization of a carbon black-filled electrically conductive nylon-12 nanocomposites produced by selective laser sintering", Mater. Sci. Eng. A, Vol. 527, pp. 2637-2642.
6. Athreya, S.R., Kalaitzidou, K. and Das, S. (2011), "Mechanical and microstructural properties of nylon-12/ carbon black composites: selective laser sintering versus melt compounding and injection molding", Compos. Sci. Technol., Vol. 71, pp. 506-510.
7. Bai, J.G., Creehan, K.D. and Kuhn, H.A. (2007), "Inkjet printable nanosilver suspensions for enhanced sintering quality in rapid manufacturing", Nanotechnology, Vol. 18, pp. 185701-185705.
8. Barman, B. and Sarma, K.C. (2011), "Luminescence properties of ZnS quantum dots embedded in polymer matrix", Chalcogenide Lett., Vol. 8, pp. 171-176.
9. Baughman, R.H., Zakhidov, A.A. and Heer, W.A.D. (2002), "Carbon nanotubes - the route toward applications", Science, Vol. 297, pp. 787-792. (Pubitemid 34845917)
10. Bhattacharya, P., Ghosh, S. and Stiff-Roberts, A.D. (2004), "Quantum dot opto-electronic devices", Annu. Rev. Mater. Res., Vol. 34, pp. 1-40.
11. Buffat, P. and Borel, J.-P. (1976), "Size effect on the melting of gold particles", Phys. Rev. A, Vol. 13, pp. 2287-2298.
12. Burda, C., Chen, X., Narayanan, R. and El-Sayed, M.A. (2005), "Chemistry and properties of nanocrystals of different shapes", Chem. Rev., Vol. 105, pp. 1025-1102. (Pubitemid 40600877)
13. Cai, K., Sun, J., Li, Q., Wang, R., Li, B. and Zhou, J. (2011), "Direct-writing construction of layered meshes from nanoparticles-vaseline composite inks: rheological properties and structures", Appl. Phys. A, Vol. 102, pp. 501-507.
14. Campbell, T.A. (2009), "Measuring the nano-world", Nano Today, Vol. 4, pp. 380-381.
15. Campbell, T.A. and Henry, K.D. (2009), "Carbon nanotube nanometrology system", USA patent Application.
16. Chung, H. and Das, S. (2008), "Functionally graded nylon- 11/silica nanocomposites produced by selective laser sintering", Mater. Sci. Eng. A, Vol. 487, pp. 251-257. (Pubitemid 351676792)
17. Coleman, J.N., Khan, U. and Gun'ko, Y.K. (2006), "Mechanical reinforcement of polymers using carbon nanotubes", Adv. Mater., Vol. 18, pp. 689-706.
18. Corma, A. and Garcia, H. (2008), "Supported gold nanoparticles as catalysts for organic reactions", Chem. Soc. Rev., Vol. 37, pp. 2096-2126.
19. Crane, N.B., Wilkes, J., Sachs, E. and Allen, S.M. (2006), "Improving accuracy of powder-based SFF processes by metal deposition from a nanoparticle dispersion", Rapid Prototyping J., Vol. 12, pp. 266-274. (Pubitemid 44601845)
20. Daniel, M.-C. and Astruc, D. (2004), "Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology", Chem. Rev., Vol. 104, pp. 293-346.
21. Duan, B., Wang, M., Zhou, W.Y., Cheung, W.L., Li, Z.Y. and Lu, W.W. (2010), "Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering", Acta Biomater., Vol. 6, pp. 4495-4505.
22. Duan, Y., Zhou, Y., Tang, Y. and Li, D. (2011), "Nano- TiO2-modified photosensitive resin for RP", Rapid Prototyping J., p. 17.
23. Eustis, S. and El-Sayed, M.A. (2006), "Why gold nanoparticles are more precious than pretty gold: noble metal surface plasmon resonance and its enhancement of the radiative and nonradiative properties of nanocrystals of different shapes", Chem. Soc. Rev., Vol. 35, pp. 209-217. (Pubitemid 43327142)
24. George, M.C., Mohraz, A., Piech, M., Bell, N.S., Lewis, J.A. and Braun, P.V. (2009), "Direct laser writing of photoresponsive colloids for microscale patterning of 3D porous structures", Adv. Mater., Vol. 21, pp. 66-70.
25. Goodridge, R.D., Shofner, M.L., Hague, R.J.M., McClelland, M., Schlea, M.R., Johnson, R.B. and Tuck, C.J. (2011), "Processing of a polyamide-12/carbon nanofibre composite by laser sintering", Polym. Test., Vol. 30, pp. 94-100.
26. Haick, H. (2007), "Chemical sensors based on molecularly modified metallic nanoparticles", J. Phys. D: Appl. Phys., Vol. 40, pp. 7173-7186. (Pubitemid 350147854)
27. Ivanova, O.S. and Zamborini, F.P. (2010a), "Electrochemical size discrimination of gold nanoparticles attached to glass/ indium-tin-oxide electrodes by oxidation in bromidecontaining electrolyte", Anal. Chem., Vol. 82, pp. 5844-5850.
28. Ivanova, O.S. and Zamborini, F.P. (2010b), "Size-dependent electrochemical oxidation of silver nanoparticles", J. Am. Chem. Soc., Vol. 132, pp. 70-72.
29. Jain, P.K., Huang, X., El-Sayed, I.H. and El-Sayed, M.A. (2008), "Noble metals on the nanoscale: optical and photothermal properties and some applications in imaging, sensing, biology, and medicine", Accounts Chem. Res., Vol. 41, pp. 1578-1586.
30. Jaiswal, J.K. and Simon, S.M. (2004), "Potentials and pitfalls of fluorescent quantum dots for biological imaging", Trends Cell Biol., Vol. 14, pp. 497-504. (Pubitemid 39209357)
31. Jana, N.R., Gearheart, L. and Murphy, C.J. (2001), "Wet chemical synthesis of high aspect ratio cylindrical gold nanorods", J. Phys. Chem. B, Vol. 105, pp. 4065-4067. (Pubitemid 35381537)
32. Jensen, K., Mickelson, W., Kis, A. and Zettl, A. (2007), "Buckling and kinking force measurements on individual multiwalled carbon nanotubes", Phys. Rev. B, Vol. 76, pp. 195436-195440.
33. Katz, D., Wizansky, T., Millo, O., Rothenberg, E., Mokari, T. and Banin, U. (2002), "Size-dependent tunneling and optical spectroscopy of CdSe quantum rods", Phys. Rev. Lett., Vol. 89, pp. 0868011-0868014.
34. Kim, J. and Creasy, T.S. (2004), "Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite", Polym. Test., Vol. 23, pp. 629-636.
35. Kolmakov, A.andMoskovits,M.(2004),"Chemical sensing and catalysis by one-dimensional metal-oxide nanostructures", Annu. Rev. Mater. Res., Vol. 34, pp. 151-180.
36. Kostarelos, K., Bianco, A. and Prato, M. (2009), "Promises, facts and challenges for carbon nanotubes in imaging and therapeutics", Nat. Nanotechnol., Vol. 4, pp. 627-633.
37. Lao, S.C., Yong, W., Nguyen, K., Moon, T.J., Koo, J.H., Pilato, L. and Wissler, G. (2010a), "Flameretardant polyamide 11 and 12 nanocomposites: processing, morphology, and mechanical properties", J. Compos. Mater., Vol. 44, pp. 2933-2951.
38. Lao, S.C., Kan, M.F., Lam, C.K., Chen, D.Z., Koo, J.H., Moon, T., Londa, M., Takatsuka, T., Kuramoto, E., Wissler, G., Pilato, L. and Luo, Z.P. (2010b), "Polyamide 11-carbon nanotubes nanocomposites: processing, morphological, and property characterization", Twenty-First International SFF Symposium - An Additive Manufacturing Conference, Austin, TX, USA, pp. 451-467.
39. Li, L., Daou, T.J., Texier, I., Chi, T.T.K., Liem, N.Q. and Reiss, P. (2009), "Highly luminescent CuInS2/ZnS core/ shell nanocrystals: cadmium-free quantum dots for in vivo imaging", Chem. Mater., Vol. 21, pp. 2422-2429.
40. Li, Q. and Lewis, J.A. (2003), "Nanoparticle inks for directed assembly of three-dimensional periodic structures", Adv. Mater., Vol. 15, pp. 1639-1643.
41. Liu, F.-K. (2009), "Analysis and applications of nanoparticles in the separation sciences: a case of gold nanoparticles", J. Chromatogr. A, Vol. 1216, pp. 9034-9047.
42. Liu, S. and Tang, Z. (2010), "Nanoparticle assemblies for biological and chemical sensing", J. Mater. Chem., Vol. 20, pp. 24-35.
43. Love, S.A., Marquis, B.J. and Haynes, C.L. (2008), "Recent advances in nanomaterial plasmonics: fundamental studies and applications", Appl. Spectrosc., Vol. 62, pp. 346A-362A.
44. Lu, W. and Lieber, C.M. (2007), "Nanoelectronics form the bottom up", Nat. Mater., Vol. 6, pp. 841-850.
45. Luque, A., Marti, A. and Nozik, A.J. (2007), "Solar cells based on quantum dots: multiple exciton generation and intermediate bands", MRS Bull., Vol. 32, pp. 236-241. (Pubitemid 46506722)
46. Michalet, X., Pinaud, F.F., Bentolila, L.A., Tsay, J.M., Doose, S., Li, J.J., Sundaresan, G.,Wu, A.M., Gambhir, S.S. and Weiss, S. (2005), "Quantum dots for live cells, in vivo imaging, and diagnostics", Science, Vol. 307, pp. 538-544. (Pubitemid 40165671)
47. Moreels, I., Justo, Y., Geyter, B.D., Haustraete, K., Martins, J.C. and Hens, Z. (2011), "Size-tunable, bright, and stable PbS quantum dots: a surface chemistry study", ACS Nano, Vol. 5, pp. 2004-2012.
48. Mulvaney, P. (1996), "Surface plasmon spectroscopy of nanosized metal particles", Langmuir, Vol. 12, pp. 788-800. (Pubitemid 126568066)
49. Nadkarni, S.S. and Smay, J.E. (2006), "Concentrated barium titanate colloidal gels prepared by bridging flocculation for use in solid freeform fabrication", J. Am. Ceram. Soc., Vol. 89, pp. 96-103.
50. Narayanan, R. and El-Sayed, M.A. (2005), "Catalysis with transition metal nanoparticles in colloidal solution: nanoparticle shape dependence and stability", J. Phys. Chem. B, Vol. 109, pp. 12663-12676. (Pubitemid 41004923)
51. Pop, E., Mann,D.,Wang, Q., Goodson, K. and Dai,H. (2006), "Thermal conductance of an individual single-wall carbon nanotube above room temperature", Nano Lett., Vol. 6, pp. 96-100. (Pubitemid 43166108)
52. Pyatenko, A., Yamaguchi, M. and Suzuki, M. (2007), "Synthesis of spherical silver nanoparticles with controllable sizes in aqueous solutions", The Journal of Physical Chemistry C, Vol. 111, pp. 7910-7917. (Pubitemid 46955483)
53. Sachs, E., Cima, M., Williams, P., Brancazio, D. and Cornie, J. (1992), "Three dimensionsl printinf: rapid tooling and prototypes directly from a CAD model", J. Eng. Ind., Vol. 144, pp. 481-488. (Pubitemid 23581969)
54. Sandoval, J.H. and Wicker, R.B. (2006), "Functionalizing stereolithography resins: effects of dispersed multi-walled carbon nanotubes on physical properties", Rapid Prototyping J., Vol. 12, pp. 292-303. (Pubitemid 44601848)
55. Sardar, R., Funston, A.M., Mulvaney, P. and Murray, R.W. (2009), "Gold nanoparticles: past, present, and future", Langmuir, Vol. 25, pp. 13840-13851.
56. Serp, P., Corrias, M. and Kalck, P. (2003), "Carbon nanotubes and nanofibers in catalysis", Appl. Catal. A-Gen., Vol. 253, pp. 337-358.
57. Sgobba, V. and Guldi, D.M. (2009), "Carbon nanotubes - electronic/electrochemical properties and application for nanoelectronics and photonics", Chem. Soc. Rev., Vol. 38, pp. 165-184.
58. Shofner, M.L., Lozano, K., Rodriguez-Macias, F.J. and Barrera, E.V. (2003a), "Nanofiber-reinforced polymers prepared by fused deposition modeling", J. Appl. Polym. Sci., Vol. 89, pp. 3081-3090. (Pubitemid 36880130)
59. Shofner, M.L., Rodriguez-Macias, F.J., Vaidyanathan, R. and Barrera, E.V. (2003b), "Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication", Composites: Part A, Vol. 34, pp. 1207-1217.
60. Sinha, S., Barjami, S., Iannacchione, G., Schwab, A. and Muench, G. (2005), "Off-axis thermal properties of carbon nanotube films", J. Nanopart. Res., Vol. 7, pp. 651-657. (Pubitemid 41767365)
61. Sonvico, F., Dubernet, C., Colombo, P. and Couvreur, P. (2005), "Metallic colloid nanotechnology, applications in diagnosis and therapeutics", Curr. Pharm. Design, Vol. 11, pp. 2091-2105. (Pubitemid 40766844)
62. Takesue, I., Haruyama, J., Kobayashi, N., Chiashi, S., Maruyama, S., Sugai, T. and Shinohara, H. (2006), "Superconductivity in entirely end-bonded multiwalled carbon nanotubes", Phys. Rev. Lett., Vol. 96, pp. 057001-057004.
63. Tong, L., Wei, Q., Wei, A. and Cheng, J.-X. (2009), "Gold nanorods as contrast agents for biological imaging: optical properties, surface conjugation and photothermal effects", Photochem. Photobiol., Vol. 85, pp. 21-32.
64. Wang, C., Guo, Z.-X., Fu, S., Wu, W. and Zhu, D. (2004), "Polymers containing fullerene or carbon nanotube structures", Prog. Polym. Sci., Vol. 29, pp. 1079-1141.
65. Yildirim, E.D., Yin, X., Nair, K. and Sun, W. (2008), "Fabrication, characterization, and biocompatibility of single-walled carbon nanotube-reinforced alginate composite scaffoldsmanufactured using freeformfabrication technique", J. Biomed.Mater. Res. B:Appl. Biomater., Vol. 87, pp. 406-414.
66. Yu, M.-F., Lourie, O., Dyer, M.J., Moloni, K., Kelly, T.F. and Ruoff, R.S. (2000), "Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load", Science, Vol. 287, pp. 637-640. (Pubitemid 30070908)
67. Zanello, L.P., Zhao, B., Hu, H. and Haddon, R.C. (2006), "Bone cell proliferation on carbon nanotubes", Nano Lett., Vol. 6, pp. 562-567.
68. Zheng, H., Zhang, J., Lu, S., Wang, G. and Xu, Z. (2006), "Effect of core-shell composite particles on the sintering behavior and properties of nano-Al2O3/polystyrene composite prepared by SLS", Mater. Lett., Vol. 60, pp. 1219-1223. (Pubitemid 43173476)