Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication

Composites Part A: Applied Science and Manufacturing

Volumn 34, Issue 12, 2003, Pages 1207-1217

  Shofner, M L ^a   Rodriguez Macias F J ^b   Vaidyanathan, R ^c   Barrera, E V ^a  

^a Rice University   (United States)

^b RICE UNIVERSITY   (United States)

^c Advanced Ceramics Research   (United States)

Author keywords

A. Polymer matrix composites (PMCs); Carbon nanotube; D. Mechanical testing; E. Extrusion

Indexed keywords

CARBON FIBERS; CARBON NANOTUBES; EXTRUSION; FABRICATION; POLYACRYLONITRILES; POLYSTYRENES; STRENGTH OF MATERIALS;

SINGLE WALLED CARBON NANOTUBES (SWNT);

CARBON FIBER REINFORCED PLASTICS;

EID: 0242335636     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2003.07.002     Document Type: Article

References (48)

1. Thess A., et al. Crystalline ropes of metallic carbon nanotubes. Science. 273:(5274):1996;483-487.
2. Hone J., et al. Electrical and thermal transport properties of magnetically aligned single wall carbon nanotube films. Appl Phys Lett. 77:(5):2000;666-668.
3. Yu M.F., et al. Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties. Phys Rev Lett. 84:(24):2000;5552-5555.
4. Tibbetts G.G. Vapor-grown carbon fibers: status and prospects. Carbon. 27:(5):1989;745-747.
5. Kumar S., et al. Synthesis, structure, and properties of PBO/SWNT composites. Macromolecules. 35:(24):2002;9039-9043.
6. Cooper C.A., et al. Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix. Compos Sci Technol. 62:2002;1105-1112.
7. Andrews R., et al. Nanotube composite carbon fibers. Appl Phys Lett. 75:(9):1999;1329-1331.
8. Lozano K., Bonilla-Rios J., Barrera E.V. A study on nanofiber-reinforced thermoplastic composites. II. Investigation of the mixing rheology and conduction properties. J Appl Polym Sci. 80:2001;1162-1172.
9. Finegan I.C., Tibbetts G.G. Electrical conductivity of vapor-grown carbon fiber/thermoplastic composites. J Mater Res. 16:(6):2001;1668-1674.
10. Ting J.-M., Lake M.L. Vapor grown carbon fiber reinforced aluminum composites with very high thermal conductivity. J Mater Res. 10:(2):1995;247-250.
11. Jin L., Bower C., Zhou O. Alignment of carbon nanotubes in a polymer matrix by mechanical stretching. Appl Phys Lett. 73:(9):1998;1197-1199.
12. Crockett R., Petersen D., Cooper K. Fused deposition modeling in microgravity. In: Solid Freeform Fabrication Proceedings. 1999;The University of Texas at Austin, Austin, TX.
13. Lozano K., Barrera E.V. Nanofiber-reinforced thermoplastic composites. I. Thermoanalytical and mechanical analyses. J Appl Polym Sci. 79:2001;125-133.
14. Shofner M.L., et al. Nanofiber reinforced polymers prepared by fused deposition modeling. J Appl Polym Sci. 89:(11):2003;3081-3090.
15. Iijima S. Helical microtubules of graphitic carbon. Nature. 354:1991;56-58.
16. Iijima S., Ichihashi T. Single-shell carbon nanotubes of 1-nm diameter. Nature. 363:1993;603-605.
17. Bethune D.S., et al. Cobalt-catalysed growth of carbon nanotubes with single-atomic-layer walls. Nature. 363:1993;605-607.
18. Walters D.A., et al. Elastic strain of freely suspended single-wall carbon nanotube ropes. Appl Phys Lett. 74:(25):1999;3803-3805.
19. Gere J.M., Timoshenko S.P. Mechanics of materials. 3rd ed:1990;PWS Publishing Company, Boston.
20. Linde D.R. CRC handbook of chemistry and physics. 73rd ed:1992-1193;CRC Press, Boca Rotan.
21. http://www.apsci.com/ppi-pyro3.html.
22. Qian D., et al. Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites. Appl Phys Lett. 76:(20):2000;2868-2870.
23. Jin Z., et al. Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly(methyl methacrylate) composites. Chem Phys Lett. 337:2001;43-47.
24. Jin Z., et al. Poly(vinylidene fluoride)-assisted melt-blending of multi-walled carbon nanotube/poly(methyl methacrylate) composites. Mater Res Bull. 37:2002;271-278.
25. Haggenmueller R., et al. Aligned single-wall carbon nanotubes in composites by melt processing methods. Chem Phys Lett. 330:2000;219-225.
26. Vaidyanathan R., et al. The extrusion freeforming of functional ceramic prototypes. JOM. 52:(12):2000;34-37.
27. Stuffle K., et al. Solid freeform fabrication of ceramics from polymerizable slurry. In: Solid Freeform Fabrication Proceedings. 1993;The University of Texas at Austin, Austin, TX.
28. Calvert P., Crockett R. Chemical solid free-form fabrication: making shapes without molds. Chem Mater. 9:(3):1997;650-663.
29. Calvert P., Lin T.L., Martin H. Extrusion freeform fabrication of chopped-fibre reinforced composites. High Perform Polym. 9:(4):1997;449-456.
30. Liu Z.S., et al. Development of soybean oil-based composites by solid freeform fabrication method: epoxidized soybean oil with bis or polyalkyleneamine curing agents system. J Appl Polym Sci. 85:2002;2100-2107.
31. Basdekis C.H. ABS plastics. 1964;Reinhold Publishing Corporation, New York. p. 147.
32. Rinzler A.G., et al. Large-scale purification of single-wall carbon nanotubes: process, product, and characterization. Appl Phys A. 67:1998;29-37.
33. Alig R.L., Guth J.R., Burton P.J. Vapor grown carbon fibers with increased bulk density and method for making same. 1997;Applied Sciences, Cedarville, OH, USA.
34. Tibbetts G.G., et al. Role of sulfur in the production of carbon fibers in the vapor phase. Carbon. 32:(4):1994;569-576.
35. Wagner H.D. Nanotube-polymer adhesion: a mechanics approach. Chem Phys Lett. 361:(1-2):2002;57-61.
36. Cooper C.A., et al. Detachment of nanotubes from a polymer matrix. Appl Phys Lett. 81:(20):2002;3873-3875.
37. Lozano K., et al. Purification and functionalization of vapor grown carbon nanotubes and single wall nanotubes. In: Powder materials: current research and industrial practice (as held at the TMS Fall Meeting). 1999;Cincinnati, Ohio.
38. Barrera E.V. Key methods for developing single-wall nanotube composites. JOM. 52:(11):2000;38-42.
39. Gommans H.H., et al. Fibers of aligned single-walled carbon nanotubes: polarized Raman spectroscopy. J Appl Phys. 88:(5):2000;2509-2514.
40. Hogg R.V., Ledolter J. Applied statistics for engineers and physical scientists. 2nd ed:1987;Macmillan Publishing Company, New York.
41. Tiganis B.E., et al. Thermal degradation of acrylonitrile-butadiene-styrene (ABS) blends. Polym Degrad Stab. 76:2002;425-434.
42. Tordella J.P. Unstable flow of molten polymers. Eirich F.R. Rheology. 1969;Academic Press, New York.
43. Shenoy A.V. Rheology of filled polymer systems. 1999;Kluwer Academic Publishers, London.
44. Private Communication with R. Haggenmueller; April 2003.
45. Mitchell C.A., et al. Dispersion of functionalized carbon nanotubes in polystyrene. Macromolecules. 35:(23):2002;8825-8830.
46. Glasgow D.G., et al. Carbon nanofiber surface treatment effects on polypropylene composite properties. In: SAMPE-ACCE-DOE Advances Materials Conference. 1999;Society for the Advancement of Material and Process Engineering, Detroit, MI.
47. Yang S. et al. Thermal analysis of an acrylonitrile-butadiene-styrene/SWNF composite, Polymer Degradation and Stability, in press.
48. Ajayan P.M., et al. Single-walled carbon nanotube-polymer composites: strength and weakness. Adv Mater. 12:(10):2000;750-753.