Surrogate diesel fuel models for low temperature combustion

SAE Technical Papers

Volumn 2, Issue , 2013, Pages

  Krishnasamy, Anand ^a   Reitz, Rolf D ^a   Willems, Werner ^b   Kurtz, Eric ^c  

^a University of Wisconsin   (United States)

^b Ford Forschungszentrum Aachen GmbH   (United States)

^c FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; DIESEL ENGINES; DIESEL FUELS; DISTILLATION; ENGINE CYLINDERS; FORECASTING; FORESTRY; FUEL ADDITIVES; PHYSICAL PROPERTIES; TEMPERATURE;

CHEMISTRY REPRESENTATION; COMBUSTION CHARACTERISTICS; CONVENTIONAL COMBUSTIONS; EMISSION CHARACTERISTICS; LOW TEMPERATURE COMBUSTION; PHYSICAL AND CHEMICAL PROPERTIES; SINGLE-CYLINDER DIESEL ENGINE; SURROGATE DIESEL FUELS;

HEPTANE;

EID: 84881207605     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2013-01-1092     Document Type: Conference Paper

References (46)

1. Mickunaitis, V., Pikunas, A. and Mackoit, I., Reducing Fuel Consumption and CO2 Emissions in Motor Cars Transport 22: 160-163, 2007.
2. Heywood, J. B., Internal Combustion Engine Fundamentals McGraw Hill, 1988.
3. Iwabuchi, Y., Kawai, K., Shoji, T., and Takeda, Y., Trial of New Concept Diesel Combustion System-Premixed Compression-Ignited Combustion-, SAE Technical Paper 1999-01-0185, 1999, doi: 10.4271/1999-01-0185.
4. Kimura, S., Aoki, O., Kitahara, Y., and Aiyoshizawa, E., Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards, SAE Technical Paper 2001-01-0200, 2001, doi: 10.4271/2001-01-0200.
5. Kanda, T., Hakozaki, T., Uchimoto, T., Hatano, J., et al., PCCI Operation with Early Injection of Conventional Diesel Fuel, SAE Technical Paper 2005-01-0378, 2005, doi: 10.4271/2005-01-0378.
6. Ryan, T. and Callahan, T., Homogeneous Charge Compression Ignition of Diesel Fuel, SAE Technical Paper 961160, 1996, doi: 10.4271/961160.
7. Kokjohn, S.L., Hanson, R.M., Splitter, D.A. and Reitz, R.D., Fuel Reactivity Controlled Compression Ignition (RCCI): A Pathway to Controlled High-Efficiency Clean Combustion International Journal of Engine Research 12: 209-226, 2010.
8. Xingcai, L., Han, D. and Huang, Z., Fuel Design and Management for the Control of Advanced Compression-Ignition Combustion Modes Progress in Energy and Combustion Science 37 (6): 741-783, 2011.
9. Sluder, C., Wagner, R., Lewis, S., and Storey, J., Fuel Property Effects on Emissions from High Efficiency Clean Combustion in a Diesel Engine, SAE Technical Paper 2006-01-0080, 2006, doi: 10.4271/2006-01-0080.
10. Dec, J.E., Advanced Compression-Ignition Engines-Understanding the In-Cylinder Processes Proceedings of the Combustion Institute 32: 2727-2742, 2009.
11. Kalghatgi, G.T., Hildingsson, L., Harrison, A.J. and Johansson, B., Surrogate Fuels for Premixed Combustion in Compression Ignition Engines International Journal of Engine Research 12: 1-14, 2011.
12. Aye, M., Beeckmann, J., Vanegas, A., Peters, N., et al., Experimental Investigation of Diesel and Surrogate Fuels: Spray and Ignition Behavior, SAE Technical Paper 2011-01-1921, 2011, doi: 10.4271/2011-01-1921.
13. Hellier, P., Ladommatos, N., Allan, R., Payne, M., et al., The Impact of Saturated and Unsaturated Fuel Molecules on Diesel Combustion and Exhaust Emissions, SAE Int. J. Fuels Lubr. 5 (1): 106-122, 2012, doi: 10.4271/2011-01-1922.
14. Pitz, W.J. and Mueller, C.J., Recent Progress in the Development of Diesel Surrogate Fuels Progress in Energy and Combustion Science 37: 330-350, 2011.
15. Hellier, P., Ladommatos, N., Allan, R., Payne, M., et al., The Impact of Saturated and Unsaturated Fuel Molecules on Diesel Combustion and Exhaust Emissions, SAE Int. J. Fuels Lubr. 5 (1): 106-122, 2012, doi: 10.4271/2011-01-1922.
16. Ranzi, E., A Wide-Range Kinetic Modeling Study of Oxidation and Combustion of Transportation Fuels and Surrogate Mixtures Energy & Fuels 20: 1024-1032, 2006.
17. Cathonet, M., Advances and Challenges in the Chemical Kinetics of Combustion Proceedings of the European Combustion Meeting 2003.
18. Farrell, J., Cernansky, N., Dryer, F., Law, C., et al., Development of an Experimental Database and Kinetic Models for Surrogate Diesel Fuels, SAE Technical Paper 2007-01-0201, 2007, doi: 10.4271/2007-01-0201.
19. Hernandez, J.J., Sanz-Argent, J., Benajes, J. and Molina, S., Selection of a Diesel Fuel Surrogate for the Prediction of Auto-Ignition under HCCI Engine Conditions Fuel 87: 655-665, 2008.
20. Weber, J., Won, H., and Peters, N., Experimental Validation of a Surrogate Fuel for Diesel, SAE Technical Paper 2007-01-1842, 2007, doi: 10.4271/2007-01-1842.
21. Natelson, R.H., Kurman, M.S., Cernansky, N.P. and Miller, D.L., Experimental Investigation of Surrogates for Jet and Diesel Fuels Fuel 87: 2339-2342, 2008.
22. Bergman, M. and Golovitchev, V., Modification of a Diesel Oil Surrogate Model for 3D CFD Simulation of Conventional and HCCI Combustion, SAE Technical Paper 2008-01-2410, 2008, doi: 10.4271/2008-01-2410.
23. Naik, C., Puduppakkam, K., Wang, C., Kottalam, J., et al., Applying Detailed Kinetics to Realistic Engine Simulation: the Surrogate Blend Optimizer and Mechanism Reduction Strategies, SAE Int. J. Engines 3 (1): 241-259, 2010, doi: 10.4271/2010-01-0541.
24. Liang, L., Naik, C., Puduppakkam, K., Wang, C., et al., Efficient Simulation of Diesel Engine Combustion Using Realistic Chemical Kinetics in CFD, SAE Technical Paper 2010-01-0178, 2010, doi: 10.4271/2010-01-0178.
25. Ramirez, L. H. P., Hadj-Ali, K., Dievart, P., Moreac, G. and Dagaut, P., Kinetics of Oxidation of Commercial and Surrogate Diesel Fuels in a Jet-Stirred Reactor: Experimental and Modeling Studies Energy & Fuels 24: 1668-1776, 2010.
26. Chen, W., Shuai, S. and Wang, J., Effect of the Cetane Number on the Combustion and Emissions of Diesel Engines by Chemical Kinetics Modeling Energy & Fuels 24: 856-862, 2010.
27. Ra, Y. and Reitz, R.D., A Combustion Model for IC Engine Combustion Simulations with Multi-Component Fuels Combustion and Flame 158 (1): 69-90, 2011.
28. Ra, Y. and Reitz, R.D., A Chemical Kinetic Model for IC Engine Combustion Simulations with Multi-Component Fuels using Physical Surrogate Group Chemistry Representation in preparation, 2012.
29. Anand, K., Ra, Y., Reitz, R.D. and Bunting, B.C., Surrogate Model Development for Fuels for Advanced Combustion Engines Energy & Fuels 25: 1474-1484, 2011.
30. Puduppakkam, K., Liang, L., Naik, C., Meeks, E., et al., Use of Detailed Kinetics and Advanced Chemistry-Solution Techniques in CFD to Investigate Dual-Fuel Engine Concepts, SAE Int. J. Engines 4 (1): 1127-1149, 2011, doi: 10.4271/2011-01-0895.
31. Som, S., Longman, D.E., Luo, Z., Plomer, M. and Lu, T., Three Dimensional Simulations of Diesel Sprays Using n-Dodecane as a Surrogate Fall Technical Meeting of the Eastern States Section of the Combustion Institute Oct 9-12, 2011.
32. Luo, J., Yao, M., Liu, H. and Yang, B., Experimental and numerical study on suitable diesel fuel surrogates in low temperature combustion conditions Fuel 97: 621-629, 2012.
33. Mueller, C.J., et al., Methodology for Formulating Diesel Surrogate Fuels with Accurate Compositional, Ignition-Quality, and Volatility Characteristics Energy & Fuels 26: 3284-3303, 2012.
34. Lin, R. and Tavlarides, L.L., Thermophysical Properties Needed for the Development of the Supercritical Diesel Combustion Technology: Evaluation of Diesel Fuel Surrogate Models The Journal of Supercritical Fluids 71: 136-146, 2012.
35. Sandstroem-Dahl, C., Almen, J., and Lindgren, M., Fuel Impact on Exhaust Emissions-Comparison of Two Diesel Fuels, SAE Technical Paper 2012-01-1702, 2012, doi: 10.4271/2012-01-1702.
36. American Society for Testing and Materials (ASTM). ASTM D975, Standard Specification for Diesel Fuel Oils; ASTM International: West Conshohocken, PA, 2011.
37. Deraad, S., Fulton, B., Gryglak, A., Hallgren, B., et al., The New Ford 6.7L V-8 Turbocharged Diesel Engine, SAE Technical Paper 2010-01-1101, 2010, doi: 10.4271/2010-01-1101.
38. Styron, J., Baldwin, B., Fulton, B., Ives, D., et al., Ford 2011 6.7L Power Stroke® Diesel Engine Combustion System Development, SAE Technical Paper 2011-01-0415, 2011, doi: 10.4271/2011-01-0415.
39. Ra, Y. and Reitz, R.D., A Vaporization Model for Discrete Multi-Component Fuel Sprays International Journal of Multiphase Flow 35: 101-117, 2009.
40. Abani, N., Kokjohn, S., Park, S., Bergin, M., et al., An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations, SAE Technical Paper 2008-01-0970, 2008, doi: 10.4271/2008-01-0970.
41. Kee, R.J., Rupley, F.M. and Miller, J.A., CHEMKIN-II: A FORTRAN Chemical Kinetics Package for the Analysis of Gas Phase Chemical Kinetics Sandia Report SAND 89-8009, 1989.
42. Daubert, T.E. and Danner, R.P., Physical and thermodynamic properties of pure chemicals Vol. 4 & 5, Taylor and Francis, Washington, 1997.
43. Amsden, A. A., KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries Los Alamos National Laboratory Report, LA 12503-MS, 1993.
44. Murphy, M.J., Taylor, J.D. and McCormick, R.L., Compendium of Experimental Cetane Number Data Technical Report Prepared Under Contract No. DEAC36-99-GO10337, National Renewable Energy Laboratory, U.S. Department of Energy, September 2004.
45. Ghosh, P., Hickey, K.J. and Jaffe, S.B., Development of a Detailed Gasoline Composition-Based Octane Model Ind. Eng. Chem. Res. 45 (1): 337-345, 2006.
46. Rose, J.W. and Cooper, J.R., Technical data on fuel Seventh edition; John Wiley & Sons: New York, 1977.