Selection of a diesel fuel surrogate for the prediction of auto-ignition under HCCI engine conditions

Fuel

Volumn 87, Issue 6, 2008, Pages 655-665

  Hernandez, J J ^a   Sanz Argent, J ^a   Benajes, J ^b   Molina, S ^b  

^a UNIVERSITY OF CASTILLA LA MANCHA   (Spain)

^b UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

Auto ignition; Chemical kinetic analysis; Diesel HCCI combustion; Fuel surrogate

Indexed keywords

COMBUSTION; DIESEL FUELS; OXIDATION; REACTION KINETICS;

AUTO-IGNITION; CHEMICAL KINETIC ANALYSIS; DIESEL HCCI COMBUSTION; FUEL SURROGATE;

INTERNAL COMBUSTION ENGINES;

EID: 38849095743     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2007.05.019     Document Type: Article

References (47)

1. Directive 98/69/EC of the European Parliament And of the Council of 13 October 1998 relating to measures to be taken against air pollution by emissions from motor vehicles and amending Council Directive 70/220/EEC.
2. Proposal for a Regulation of the European Parliament and of the Council on type approval of motor vehicles with respect to emissions and on access to vehicle repair information, amending Directive 72/306/EEC and Directive././EC.
3. Johansson B. Homogeneous Charge Compression Ignition - The Future of IC Engines? In: ICAT 2004 International Conference on Automotive Technology "Future Automotive Technologies on Powertrain and Vehicle", 2004.
4. Aceves SM, Flowers DL, Martinez-Frias J, Smith JR, Dibble R, Au M, et al. HCCI ombustion: analysis and Experiments. SAE Technical Paper 2001-01-2077.
5. Stanglmaier RH, Roberts CH. Homogeneous charge compression ignition (HCCI): benefits, compromises, and future engine applications. SAE Technical Paper 1999-01-3682.
6. Najt PM, Foster DE. Compression-ignited homogeneous charge combustion. SAE Technical Paper 830264.
7. Ranzi E. A wide-range modeling study of oxidation of transportation fuels and surrogate mixtures. Energy Fuels 20 (2006) 1024-1032
8. Ó Comaire M., Curran H.J., Simmie J.M., Pitz W.J., and Westbrook C.K. A comprehensive modeling study of hydrogen oxidation. Int. J. Chem. Kinet. 36 (2004) 603-622
9. http://www.me.berkeley.edu/gri_mech/ (accessed January 2007).
10. http://www-cms.llnl.gov/combustion/combustion2.html (accessed January 2007).
11. Naik C, Pitz WJ, Westbrook CK, Sjöberg M, Dec JE, Orme J, et al. Detailed chemical kinetic modeling of surrogate fuels for gasoline and application to an HCCI engine. SAE Technical Paper 2005-01-3741.
12. Ogink R. Computer modeling of HCCI combustion. PhD Thesis, Chalmers University, 2004.
13. Agosta A., Cernansky N.P., Miller D.L., Faravelli T., and Ranzi E. Reference components of jet fuels: kinetic modeling and experimental results. Exp Therm Fluid Sci 28 (2004) 701-708
14. Violi A., Yan S., Eddings E.G., and Sarofim F. Experimental formulation and kinetic model for JP-8 surrogate mixtures. Combust Sci Technol 174 (2002) 399-417
15. Cooke J.A. Computational and experimental study of JP-8, a surrogate, and its components in counterflow diffusion flames. Proc Combust Inst 30 (2005) 439-446
16. Curran HJ, Fisher EM, Glaude PA, Marinov NM, Pitz WJ, Westbrook CK, et al. Detailed chemical kinetic modeling of diesel combustion with oxygenated fuels. SAE Technical Paper 2001-01-0653.
17. Noel L, Maroteaux F, Ahmed A. Numerical study of HCCI combustion in diesel engines using reduced chemical kinetics of n-heptane with multidimensional CFD code. SAE Technical Paper 2004-01-1909.
18. Hasegawa R, Sakata I, Koyama T, Yanagihara H. Numerical analysis of ignition control in HCCI engine. SAE Technical Paper 2003-01-1817.
19. Aceves SM, Flowers D, Martinez-Frias J, Espinosa-Loza F, Pitz WJ, Dibble R. Fuel and additive characterization for HCCI combustion. SAE Technical Paper 2003-01-1814.
20. Ryan III TW, Matheaus AC. Fuel requirements for HCCI operation. SAE Technical Paper 2003-01-1813.
21. Jeuland N., Montagne X., and Duret P. New HCCI/CAI combustion process development: methodology for determination of relevant fuel parameters. Oil Gas Sci Technol 59 (2004) 571-579
22. Kalghatgi G, Risberg P, Angstrom HE. A method of defining ignition quality of fuels in HCCI engines. SAE Technical Paper 2003-01-1816.
23. TM) - Part III. SAE Technical Paper 1999-01-3591.
24. TM) - Part IV. SAE Technical Paper 2001-01-3527.
25. Pitz WJ, Seiser R, Bozzelli JW, Seshardi K, Chen CJ, Da Costa I, et al. Chemical kinetic study of toluene oxidation. In: 29th International Symposium on Combustion, 2002, Sapporo, Japan.
26. Gustavsson J, Golovitchev VI, Helmantel A. 3-D modelling of convencional and HCCI combustion Diesel engines. SAE Technical Paper 2004-01-2964.
27. Heywood J.B. Internal Combustion Engine Fundamentals. 1st ed. (1988), McGraw-Hill. 0-07-100499-8 p. 543-45
28. Dagaut P. On the kinetics of hydrocarbon oxidation from natural gas to kerosene and diesel fuel. Phys. Chem. Chem. Phys. 4 (2002) 2079-2094
29. Mati K., Ristori A., Gaïl S., Pengloan G., and Dagaut P. The oxidation of a diesel fuel at 1-10 atm. Proc Combust Inst 31 (2007) 2939-2946
30. Edenhofer R., Lucka K., and Köhne H. Low temperature oxidation of diesel-air mixtures. Proc Combust Inst 31 (2007) 2947-2954
31. Kee RJ, Rupley FM, Miller JA, Coltrin ME, Grcar JF, Meeks E, et al., CHEMKIN Release 4.0, Reaction Design, Inc., San Diego, CA; 2004.
32. Jia M., and Xie M. A chemical kinetics model of iso-octane oxidation for HCCI engines. Fuel 85 (2006) 2593-2604
33. Lapuerta M., Armas O., and Hernández J.J. Diagnostic of D.I. Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas. Appl Therm Eng 5 (1999) 513-519
34. Armas O., Rodriguez J., Payri F., Martín J., and Agudelo J.R. Effect of the trapped mass and its composition on the heat transfer in the compression cycle of a reciprocating engine. Appl Therm Eng 25 (2005) 2842-2853
35. Payri F., Molina S., Martín J., and Armas O. Influence of measurement errors and estimated parameters on combustion diagnose. Appl Therm Eng 26 (2006) 226-236
36. Dagaut P., Pengloan G., and Ristori A. Oxidation, ignition and combustion of toluene: experimental and detailed chemical kinetic modelling. Phys Chem Chem Phys 4 (2003) 1846-1854
37. Bounaceur R., Da Costa I., Fournet R., Billaud F., and Battin-Leclerc F. Experimental and modeling study of the oxidation of toluene. Int J Chem Kinet 37 (2005) 25-49
38. Curran H.J., Gaffuri P., Pitz W.J., and Westbrook C.K. A comprehensive modeling study of n-heptane oxidation. Combust Flame 114 (1998) 149-177
39. Andrae J., Johansson D., Björnbom P., Risberg P., and Kalghatgi G. Co-oxidation in the autoignition of primary reference fuels and n-heptane/toluene blends. Combust Flame 140 (2005) 267-286
40. Woschni G. A universally Applicable Equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE Technical Paper 670931.
41. Fiveland SB, Assanis DN. A four stroke homogeneous charge compression ignition engine simulation for combustion and performance studies. SAE Technical Paper 2000-01-0332.
42. Chang J, Güralp O, Filipi Z, Assanis D, Kuo TW, Najt P, et al. New heat transfer correlation for an HCCI engine derived from measurements of instantaneous surface heat flux. SAE Technical Paper 2004-01-2996.
43. Armas O. Diagnóstico Experimental del Proceso de Combustión en Motores Diesel de Inyección Directa. Ph.D. Thesis, Universidad Politécnica de Valencia, 1998 (in Spanish).
44. Lapuerta M., Armas O., and Molina S. Study of a compression cycle of a reciprocating engine through the polytropic coefficient. Appl Therm Eng 23 (2003) 313-323
45. Bradley D., and Head R.A. Engine autoignition: the relationship between octane numbers and autoignition delay times. Combust Flame 147 (2006) 171-184
46. Xingcai L., Yuchun H., Libin J., Linlin Z., and Zhen H. Heat release analysis on combustion and parametric study on emissions of HCCI engines fuelled with 2-propanol/n-heptane blend fuels. Energy Fuels 20 (2006) 1870-1878
47. Griffiths J.F. Reduced kinetic models and their application to practical combustion systems. Prog Energy Combust Sci 21 (1995) 25-107