Physical programming: A review of the state of the art

Studies in Informatics and Control

Volumn 21, Issue 4, 2012, Pages 359-366

  Ilgin, Mehmet Ali ^a   Gupta, Surendra M ^b  

^a CELAL BAYAR UNIVERSITY   (Turkey)

^b NORTHEASTERN UNIVERSITY   (United States)

Author keywords

Multi criteria optimization; Physical programming; Review

Indexed keywords

EID: 84880407945     PISSN: 12201766     EISSN: 1841429X     Source Type: Journal    
DOI: 10.24846/v21i4y201201     Document Type: Article

References (77)

1. BARIL, C., S. YACOUT, B. CLéMENT, An Interactive Multi-objective Algorithm for Decentralized Decision Making in Product Design. Optimization and Engineering, vol. 13, no. 1, 2012, pp. 121-150.
2. BARIL, C., S. YACOUT, B. CLéMENT, Design for Six Sigma through Collaborative Multi-objective Optimization. Computers & Industrial Engineering, vol. 60, no. 1, 2011, pp. 43-55.
3. CHEN, W., A. SAHAI, A. MESSAC, G. SUNDARARAJ, Exploration of the Effectiveness of Physical Programming in Robust Design. Journal of Mechanical Design, vol. 122, no. 2, 2000, pp. 155-163.
4. GULSUN, B., G. TUZKAYA, U. R. TUZKAYA, S. ONUT, An Aggregate Production Planning Strategy Selection Methodology based on Linear Physical Programming. International Journal of Industrial Engineering, vol. 16, no. 2, 2009, pp. 135-146.
5. HERNANDEZ, G., J. K. ALLEN, F. MISTREE, The Compromise Decision Support Problem: Modeling the Deviation Function as in Physical Programming. Engineering Optimization, vol. 33, no. 4, 2001, pp. 445-471.
6. HUANG, H.-Z., Z.-G. TIAN, M. ZUO, Multiobjective Optimization of Three-stage Spur Gear Reduction Units using Interactive Physical Programming. Journal of Mechanical Science and Technology, vol. 19, no. 5, 2005a, pp. 1080-1086.
7. HUANG, H.-Z., X. ZHANG, Z.-G. TIAN, C.-S. LIU, Y.-K. GU, Optimal Design of Conic-Cylindrical Gear Reduction Unit Using Fuzzy Physical Programming. Intelligent Information Processing II, Springer, Boston, 2005b, pp. 191-200.
8. HUANG, H., Z. TIAN, Application of Neural Network to Interactive Physical Programming. Advances in Neural Networks - ISNN 2005, Springer Berlin / Heidelberg.2005, pp. 194-205.
9. HUANG, H., Z. TIAN, Y. GU, Reliability and Redundancy Apportionment Optimization using Interactive Physical Programming. International Journal of Reliability Quality and Safety Engineering, vol. 11, no. 3, 2004, pp. 213-222.
10. ILGIN, M. A., S. M. GUPTA, Remanufacturing Modeling and Analysis. Boca Raton, Florida, CRC Press, 2012.
11. IMTANAVANICH, P., S. M. GUPTA, Evolutionary Computation with Linear Physical Programming for Solving a Disassembly-to-Order System. Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI, Boston, Massachusetts, 2006a, pp. 30-41.
12. IMTANAVANICH, P., S. M. GUPTA, Linear Physical Programming Approach for a Disassembly-to-Order System under Stochastic Yields and Product's Deterioration. Proceedings of the 2006 POMS Meeting, Boston, MA 2006b, Paper no. 004-0213.
13. KONGAR, E., S. M. GUPTA, Disassembly-to-Order System using Linear Physical Programming. Proceedings of 2002 IEEE International Symposium on Electronics and the Environment, San Francisco, California, 2002, pp. 312-317.
14. KONGAR, E., S. M. GUPTA, Solving the Disassembly-to-Order Problem using Linear Physical Programming. International Journal of Mathematics in Operational Research, vol. 1, no. 4, 2009, pp. 504-531.
15. KONGSUWAN, P., S. SANGMUN, Integrating Physical Programming to Information Security System Management. Proceedings of the 11th International Conference on Advanced Communication Technology, Phoenix Park, South Korea, 2009, pp. 143-148.
16. KOVACH, J., B. CHO, J. ANTONY, Development of an Experiment-based Robust Design Paradigm for Multiple Quality Characteristics using Physical Programming. The International Journal of Advanced Manufacturing Technology, vol. 35, no. 11, 2008, pp. 1100-1112.
17. KUMAR, V., M. TRIPATHI, M. PANDEY, M. TIWARI, Physical Programming and Conjoint Analysis-based Redundancy Allocation in Multistate Systems: a Taguchi Embedded Algorithm Selection and Control (TAS&C) Approach. Proceedings of the Institution of Mechanical Engineers Part O: Journal of Risk and Reliability, vol. 223, no. 3, 2009, pp. 215-232.
18. LAI, X., M. XIE, K.-C. TAN, QFD Optimization using Linear Physical Programming. Engineering Optimization, vol. 38, no. 5, 2006, pp. 593-607.
19. LAMBERT, A. J. D., S. M. GUPTA, Disassembly Modeling for Assembly, Maintenance, Reuse, and Recycling. Boca Raton, Florida, CRC Press, 2005.
20. LI, H., M. MA, Y. JING, A New Method based on LPP and NSGA-II for Multiobjective Robust Collaborative Optimization. Journal of Mechanical Science and Technology, vol. 25, no. 5, 2011a, pp. 1071-1079.
21. LI, L., X. CHU, L. GAO, Q. BO, X. SHAO, Analytical Target Cascading based on Physical Programming. Proceedings of IEEE International Conference on Systems Man and Cybernetics, Istanbul, Turkey 2010, pp. 3060-3067.
22. LI, L., Y.-H. ZHANG, Study on Multi-objective Optimization Based on the Integration of Linear Physical Programming within Collaborative Optimization. Proceedings of the International Conference on Fuzzy Systems and Knowledge Discovery, Sichuan, China, 2012, pp. 2711-2714.
23. LI, W., M. J. ZUO, R. MOGHADDASS, Optimal Design of a Multi-State Weighted Series-Parallel System Using Physical Programming and Genetic Algorithms. Asia-Pacific Journal of Operational Research, vol. 28, no. 4, 2011b, pp. 543-562.
24. LI, X., M. XIE, N. SZU HUI, Multi-Objective Optimization Approaches to Software Release Time Determination. Asia-Pacific Journal of Operational Research, vol. 29, no. 3, 2012, pp.1-19.
25. LIN, J., Z. LUO, L. TONG, A New Multi-objective Programming Scheme for Topology Optimization of Compliant Mechanisms. Structural and Multidisciplinary Optimization, vol. 40, no. 1, 2010, pp. 241-255.
26. LUO, Y., G. TANG, G. PARKS, Multi-objective Optimization of Perturbed Impulsive Rendezvous Trajectories using Physical Programming. Journal of Guidance Control and Dynamics, vol. 31, no. 6, 2008, pp. 1829-1832.
27. MA, X., B. DONG, Linear Physical Programming-Based Approach for Web Service Selection. Proceedings of the International Conference on Information Management, Innovation Management and Industrial Engineering, Taipei, Taiwan, 2008, pp. 398-401.
28. MARIA, A., C. MATTSON, A. ISMAIL-YAHAYA, A. MESSAC, Linear Physical Programming for Production Planning Optimization. Engineering Optimization, vol. 35, no. 1, 2003, pp. 19-37.
29. MARTINEZ, M., A. MESSAC, M. RAIS-ROHANI, Manufacturability-based Optimization of Aircraft Structures using Physical Programming. AIAA Journal, vol. 39, no. 3, 2001, pp. 517-525.
30. MASSOUD, A., S. M. GUPTA, Linear Physical Programming for Solving the Multi-criteria Disassembly-to-Order Problem under Stochastic Yields, Limited Supply, and Quantity Discount. Proceedings of 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, 2010, pp. 474-479.
31. MCALLISTER, C. D., T. W. SIMPSON, K. HACKER, K. LEWIS, A. MESSAC, Integrating Linear Physical Programming within Collaborative Optimization for Multiobjective Multidisciplinary Design Optimization. Structural and Multidisciplinary Optimization, vol. 29, no. 3, 2005, pp. 178-189.
32. MELACHRINOUDIS, E., A. MESSAC, H. MIN, Consolidating a Warehouse Network: A Physical Programming Approach. International Journal of Production Economics, vol. 97, no. 1, 2005, pp. 1-17.
33. MELACHRINOUDIS, E., H. MIN, A. MESSAC, The Relocation of a Manufacturing/Distribution Facility from Supply Chain Perspectives: A Physical Programming Approach. Advances in Management Science, Multicriteria Applications. Kenneth Laurence, editor, Elsevier Science Inc., Vol. 10, 2000, pp.15-39.
34. MESSAC, A., Physical Programming: Effective Optimization for Computational Design. AIAA Journal, vol. 34, no. 1, 1996, pp. 149-158.
35. MESSAC, A., Control-structure Integrated Design with Closed-form Design Metrics using Physical Programming. AIAA Journal, vol. 36, no. 5, 1998, pp. 855-864.
36. MESSAC, A., From Dubious Construction of Objective Functions to the Application of Physical Programming. AIAA Journal, vol. 38, no. 1, 2000, pp. 155-163.
37. MESSAC, A., W. M. BATAYNEH, A. ISMAIL-YAHAYA, Production Planning Optimization with Physical Programming. Engineering Optimization, vol. 34, no. 4, 2002a, pp. 323 - 340.
38. MESSAC, A., X. CHEN, Visualizing the Optimization Process in Real-time using Physical Programming. Engineering Optimization, vol. 32, no. 6, 2000, pp. 721-747.
39. MESSAC, A., S. M. GUPTA, B. AKBULUT, Linear Physical Programming: A New Approach to Multiple Objective Optimization. Transactions on Operational Research, vol. 8, no. 2, 1996, pp. 39-59.
40. MESSAC, A., P. HATTIS, Physical Programming Design Optimization for High Speed Civil Transport. Journal of Aircraft, vol. 33, no. 2, 1996, pp. 446-449.
41. MESSAC, A., A. ISMAIL-YAHAYA, Multiobjective Robust Design using Physical Programming. Structural and Multidisciplinary Optimization, vol. 23, no. 5, 2002, pp. 357-371.
42. MESSAC, A., M. P. MARTINEZ, T. W. SIMPSON, Effective Product Family Design Using Physical Programming. Engineering Optimization, vol. 34, no. 3, 2002b, pp. 245 - 261.
43. MESSAC, A., M. P. MARTINEZ, T. W. SIMPSON, Introduction of a Product Family Penalty Function Using Physical Programming. Journal of Mechanical Design, vol. 124, no. 2, 2002c, pp. 164-172.
44. MESSAC, A., C. MATTSON, Generating Well-distributed Sets of Pareto Points for Engineering Design using Physical Programming. Optimization and Engineering, vol. 3, no. 4, 2002, pp. 431-450.
45. MESSAC, A., C. SUKAM, E. MELACHRINOUDIS, Mathematical and Pragmatic Perspectives of Physical Programming. AIAA Journal, vol. 39, no. 5, 2001, pp. 885-893.
46. MESSAC, A., S. VAN DESSEL, A. A. MULLUR, A. MARIA, Optimization of Large-scale Rigidified Inflatable Structures for Housing using Physical Programming. Structural and Multidisciplinary Optimization, vol. 26, no. 1, 2004, pp. 139-151.
47. MESSAC, A., B. WILSON, Physical Programming for Computational Control. AIAA Journal, vol. 36, no. 2, 1998, pp. 219-226.
48. MIRAKHORLI, A., M. H. FARAHANI, F. RAMTIN, New Approach in Supplier Selection using Linear Physical Programming. Proceedings of IEEE/INFORMS International Conference on Service Operations, Logistics and Informatics, Chicago, IL, 2009, pp. 47-51.
49. MULLUR, A., C. A. MATTSON, A. MESSAC, New Decision Matrix based Approach for Concept Selection using Linear Physical Programming. Proceedings of the AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, 2003, Paper No: AIAA 2003-1446.
50. NAGRATH, D., M. AVILA-ELCHIVER, F. BERTHIAUME, A. W. TILLES, A. MESSAC, M. L. YARMUSH, Soft Constraints-based Multiobjective Framework for Flux Balance Analysis. Metabolic Engineering, vol. 12, no. 5, 2010, pp. 429-445.
51. NAGRATH, D., B. W. BEQUETTE, S. M. CRAMER, A. MESSAC, Multiobjective Optimization Strategies for Linear gradient Chromatography. AIChE Journal, vol. 51, no. 2, 2005, pp. 511-525.
52. NAGRATH, D., C. CANEBA, T. KAREDATH, N. BELLANCE, Metabolomics for Mitochondrial and Cancer Studies. Biochimica et Biophysica Acta (BBA) - Bioenergetics, vol. 1807, no. 6, 2011, pp. 650-663.
53. NUKALA, S., S. M. GUPTA, Strategic and Tactical Planning of a Closed-Loop Supply Chain Network: A Linear Physical Programming Approach. Proceedings of the 2006 POMS Meeting, Boston, MA 2006, Paper No: 004-0210.
54. ONDEMIR, O., S. M. GUPTA, Order-driven Component and Product Recovery for Sensor-embedded Products (SEPS) Using Linear Physical Programming. Proceedings of the 41st International Conference on Computers & Industrial Engineering, Los Angeles, CA 2011, pp. 714-719.
55. ONUT, S., U. R. TUZKAYA, G. TUZKAYA, B. GULSUN, A Multi-Objective Energy Resource Allocation Model for Turkish Manufacturing Industry using Linear Physical Programming. International Journal of Innovative Computing Information and Control, vol. 7, no. 6, 2011, pp. 3147-3169.
56. PATEL, M., K. LEWIS, A. MARIA, A. MESSAC, System Design through Subsystem Selection using Physical Programming. AIAA Journal, vol. 41, no. 6, 2003, pp. 1089-1096.
57. POCHAMPALLY, K. K., S. GUPTA, S. KAMARTHI, Identification of Potential Recovery Facilities for Designing a Reverse Supply Chain Network using Physical Programming. Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, 2003, pp. 139-146.
58. POCHAMPALLY, K. K., S. M. GUPTA, A Linear Physical Programming Approach for Designing a Reverse Supply Chain. Proceedings of the Fifth International Conference on Operations and Quantitative Management Seoul, South Korea, 2004, pp. 261-269.
59. POCHAMPALLY, K. K., S. M. GUPTA, Use of Linear Physical Programming and Bayesian Updating for Design Issues in Reverse Logistics. International Journal of Production Research, vol. 50, no. 5, 2012, pp. 1349-1359.
60. POCHAMPALLY, K. K., S. M. GUPTA, K. GOVINDAN, Metrics for Performance Measurement of a Reverse/Closed-loop Supply Chain. International Journal of Business Performance and Supply Chain Modelling, vol. 1, no. 1, 2009a, pp. 8-32.
61. POCHAMPALLY, K. K., S. NUKALA, S. M. GUPTA, Quantitative Decision-Making Techniques for Reverse/Closed-Loop Supply Chain Design. Environment Conscious Manufacturing, S. M. Gupta and A. J. D. Lambert (Editors), Boca Raton, Florida, USA, CRC Press, 2008, pp. 105-214.
62. POCHAMPALLY, K. K., S. NUKALA, S. M. GUPTA, Strategic Planning Models for Reverse and Closed-Loop Supply Chains. Boca Raton, Florida, USA, CRC Press, 2009b.
63. SANCHIS, J., M. A. MARTíNEZ, X. BLASCO, G. REYNOSO-MEZA, Modelling Preferences in Multi-objective Engineering Design. Engineering Applications of Artificial Intelligence, vol. 23, no. 8, 2010, pp. 1255-1264.
64. SIMPSON, T. W., J. R. A. MAIER, F. MISTREE, Product Platform Design: Method and Application. Research in engineering Design, vol. 13, no. 1, 2001, pp. 2-22.
65. SROKA, M., D. LONG, Exploring Metric Sensitivity of Planners for Generation of Pareto Frontiers. Proceedings of the Sixth Starting AI Researchers' Symposium, Montpellier, France, 2012, pp. 306-317.
66. SULEMAN, A., M. GONICALVES, Multi-objective Optimization of an Adaptive Composite Beam using the Physical Programming Approach. Journal of Intelligent Material Systems and Structures, vol. 10, no. 1, 1999, pp. 56-70.
67. TAPPETA, R., J. RENAUD, A. MESSAC, G. SUNDARARAJ, Interactive Physical Programming: Tradeoff Analysis and Decision Making in Multicriteria Optimization. AIAA Journal, vol. 38, no. 5, 2000, pp. 917-926.
68. TIAN, Z.-G., H.-Z. HUANG, L.-W. GUAN, Fuzzy Physical Programming and Its Application in Optimization of Through Passenger Train Plan, Proceedings of the International Conference on Traffic and Transportation Studies, Guilin, China, 2002, pp. 498-503.
69. TIAN, Z., D. LIN, B. WU, Condition based Maintenance Optimization Considering Multiple Objectives. Journal of Intelligent Manufacturing, vol. 23, no. 2, 2012, pp. 333-340.
70. TIAN, Z., M. ZUO, Redundancy Allocation for Multi-state Systems using Physical Programming and Genetic Algorithms. Reliability Engineering & System Safety, vol. 91, no. 9, 2006, pp. 1049-1056.
71. TIAN, Z., M. J. ZUO, H. HUANG, Reliability-redundancy Allocation for Multi-state Series-Parallel Systems. IEEE Transactions on Reliability, vol. 57, no. 2, 2008, pp. 303-310.
72. TONG, X.-Y., G.-B. CAI, Y.-T. ZHENG, J. FANG, Optimization of System Parameters for Gas-generator Engines. Acta Astronautica, vol. 59, no. 1-5, 2006, pp. 246-252.
73. WANG, T.-T., X.-K. CHEN, Y. LIN, Multi-objective Optimization Based on the Integration of Linear Physical Programming within Analytical Target Cascading. Proceedings of the 4th International Conference on Biomedical Engineering and Informatics, Shanghai, China 2011, pp. 2286-2289.
74. WILSON, B. H., C. ERIN, A. MESSAC, Optimal Design of a Vibration Isolation Mount using Physical Programming. Journal of Dynamic Systems Measurement and Control, vol. 121, no. 2, 1999, pp. 171-178.
75. ZHANG, N., 2D Turbine Airfoil Optimization using Physical Programming. Proceedings of the International Conference on Mechatronics and Automation, Xi'an, China 2010, pp. 852-856.
76. ZHANG, N., Physical Programming based Multidisciplinary Optimization for Aircraft Conceptual Parameter Design. Proceedings of the Chinese Control and Decision Conference, Mianyang, China 2011, pp. 2387-2392.
77. ZHANG, X., H.-Z. HUANG, L. YU, Fuzzy preference based Interactive Fuzzy Physical Programming and its application in multi-objective optimization. Journal of Mechanical Science and Technology, vol. 20, no. 6, 2006, pp. 731-737.