Soluble soybean polysaccharide: A new carbohydrate to make a biodegradable film for sustainable green packaging

Carbohydrate Polymers

Volumn 97, Issue 2, 2013, Pages 817-824

  Tajik, Sima ^a   Maghsoudlou, Yahya ^a   Khodaiyan, Faramarz ^b   Jafari, Seid Mahdi ^a   Ghasemlou, Mehran ^b   Aalami, Mehran ^a  

^a GORGAN UNIVERSITY OF AGRICULTURAL SCIENCES AND NATURAL RESOURCES   (Iran)

^b UNIVERSITY OF TEHRAN   (Iran)

Author keywords

Atomic force microscopy; Optical properties; Plasticizer; Soluble soybean polysaccharide

Indexed keywords

ATOMIC FORCE MICROSCOPY; GLYCEROL; MICROSTRUCTURE; OPTICAL PROPERTIES; PACKAGING MATERIALS; PLASTICIZERS; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH;

BIODEGRADABLE FILM; COLOR MEASUREMENTS; ELONGATION AT BREAK; FILM-FORMING MATERIALS; FOOD-PACKAGING MATERIALS; GLYCEROL CONCENTRATION; SOLUBLE SOYBEAN POLYSACCHARIDES; WATER VAPOR PERMEABILITY;

BIODEGRADABLE POLYMERS;

GLYCINE MAX;

EID: 84879831510     PISSN: 01448617     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbpol.2013.05.037     Document Type: Article

References (35)

1. Abdorreza, M. N., Cheng, L. H., & Karim, A. A. (2011). Effects of plasticizers on thermal properties and heat sealability of sago starch films. Food Hydrocolloids, 25, 56-60.
2. Ahmadi, R., Kalbasi-Ashtari, A., Oromiehie, A., Yarmand, M. S., & Jahandideh, F. (2012). Development and characterization of a novel biodegradable edible film obtained from psyllium seed (Plantago ovata Forsk). Journal of Food Engineering, 109, 745-751.
3. Arvanitoyannis, I., Psomiadou, E., Nakayama, A., Aiba, S., & Yamamoto, N. (1997). Edible films made from gelatin, soluble starch and polyols. Part 3. Food Chemistry, 60(4), 593-604. (Pubitemid 27390476)
4. Asai, I., Watari, Y., Iida, H., Masutake, K., Ochi, T., Ohashi, S., et al. (1994). Effect of soluble soybean polysaccharide on dispersion stability of acidified milk protein. In K. Nishinari, & E. Doi (Eds.), Food hydrocolloids: Structure, properties and functions (pp. 151-156). New York: Plenum Press.
5. ASME B46.1. (2009). Surface texture (surface roughness, waviness, and lay). An American National Standard. New York: ASME.
6. ASTM. (2012a). Standard test methods for water vapor transmission of material, E96/E96M. Annual book of ASTM. Philadelphia, PA: American Society for Testing and Materials.
7. ASTM. (2012b). Standard test method for tensile properties of thin plastic sheeting. Standard D882. Annual book of ASTM. Philadelphia, PA: American Society for Testing and Materials.
8. Averous, L., & Boquillon, N. (2004). Biocomposites based on plasticized starch: Thermal and mechanical behaviors. Carbohydrate Polymers, 56, 111-122.
9. Bolin, H. R., & Huxsoll, C. C. (1991). Control of minimally processed carrot (Dascus carota) surface discoloration caused by abrasion peeling. Journal of Food Science, 56, 416-418.
10. Carvalho, R. A., & Grosso, C. R. F. (2004). Characterization of gelatin based films modified with transglutaminase, glyoxal and formaldehyde. Food Hydrocolloids, 18, 717-726.
11. Cuq, B., Gontard, N., Cuq, J. L., & Guilbert, S. (1997). Select functional properties of fish myofibrilar protein-based films as affect by hydrophilic plasticizer. Journal of Agricultural and Food Chemistry, 45(3), 622-626. (Pubitemid 127483678)
12. Debeaufort, F., Quezada-Gallo, J. A., & Voilley, A. (1998). Edible films and coatings: Tomorrow's packagings: A review. Critical Reviews in Food Science and Nutrition, 38(4), 299-313. (Pubitemid 128354932)
13. Furuta, H., & Maeda, H. (1999). Rheological properties of water-soluble soybean polysaccharides extracted under weak acidic condition. Food Hydrocolloids, 13, 267-274. (Pubitemid 129499461)
14. Gennadios, A., Weller, C. L., & Testin, R. F. (1993). Temperature effect on oxygen permeability of edible protein-based films. Journal of Food Science, 58, 212-214.
15. Ghanbarzadeh, B., & Almasi, H. (2011). Physical properties of edible emulsified films based on carboxymethyl cellulose and oleic acid. International Journal of Biological Macromolecules, 48(1), 44-49.
16. Ghanbarzadeh, B., Almasi, H., & Entezami, A. A. (2010). Physical properties of edible modified starch/carboxymethyl cellulose films. Innovative Food Science and Emerging Technologies, 11(4), 697-702.
17. Ghasemlou, M., Khodaiyan, F., & Oromiehie, A. (2011a). Physical, mechanical, barrier, and thermal properties of polyol-plasticized biodegradable edible film made from kefiran. Carbohydrate Polymers, 84, 477-483.
18. Ghasemlou, M., Khodaiyan, F., & Oromiehie, A. (2011b). Rheological and structural characterisation of film-forming solutions and biodegradable edible film made from kefiran as affected by various plasticizer types. International Journal of Biological Macromolecules, 49, 814-821.
19. Ghasemlou, M., Khodaiyan, F., Oromiehie, A., & Yarmand, M. S. (2011). Development and characterization of a new biodegradable edible film made from kefiran, an exopolysaccharide obtained from kefir grains. Food Chemistry, 127, 1496-1502.
20. Gontard, N., Duchez, C., Cuq, B., & Guilbert, S. (1994). Edible composite films of wheat gluten and lipids: Water vapour permeability and other physical properties. Food Science and Technology, 29, 39-50.
21. Hosseini, S. F., Rezaei, M., Zandi, M., & Ghavi, F. F. (2013). Preparation and functional properties of fish gelatin-chitosan blend edible films. Food Chemistry, 136, 1490-1495.
22. Janjarasskul, T., & Krochta, J. M. (2010). Edible packaging materials. Annual Review of Food Science and Technology, 1, 415-448.
23. Lourdin, D., Coignard, L., Bizot, H., & Colonna, P. (1997). Influence of equilibrium relative humidity and plasticizer concentration on the water content and glass transition of starch materials. Polymer, 38, 5401-5406. (Pubitemid 127428152)
24. Maeda, H. (2000). Soluble soybean polysaccharide. In G. O. Phillips, & P. A. Williams (Eds.), Handbook of hydrocolloids (pp. 309-319). Boca Raton, Fla: CRC Press.
25. Mali, S., Sakanaka, L. S., Yamashita, F., & Grossmann, M. V. E. (2005). Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect. Carbohydrate Polymers, 60, 283-289. (Pubitemid 40612786)
26. Nakamura, A., Furuta, H., Maeda, H., Takao, T., & Nagamatsu, N. (2002). Structural studies by stepwise enzymatic degradation of the main backbone of soybean soluble polysaccharides consisting of galacturonan and rhamnogalacturonan. Bioscience, Biotechnology, and Biochemistry, 66, 1301-1313. (Pubitemid 39251261)
27. Shellhammer, T. H., & Krochta, J. M. (1997). Whey protein emulsion film performance as affected by lipid type amount. Journal of Food Science, 62(2), 390-394. (Pubitemid 27201104)
28. Shojaee-Aliabadi, S., Hosseini, H., Mohammadifar, M. A., Mohammadi, A., Ghasemlou, M., Ojagh, S. M., et al. (2013). Characterization of antioxidant-Antimicrobial-carrageenan films containing Satureja hortensis essential oil. International Journal of Biological Macromolecules, 52(1), 116-124.
29. Shorey, R. L., Willis, R. A., Lo, G. S., & Steinke, F. H. (1985). Effect of soybean polysaccharides on plasma lipids. Journal of the American Dietetic Association, 85, 1460-1465.
30. Smith, S. A. (1986). Polyethylene, low density. In M. Bakker (Ed.), The Wiley encyclopedia of packaging technology (pp. 514-523). New York: John Wiley and Sons.
31. Sobral, P. J. A., Menegalli, F. C., Hubinger, M. D., & Roques, M. A. (2001). Mechanical, water vapor barrier and thermal properties of gelatin based edible films. Food Hydrocolloids, 15, 423-432. (Pubitemid 33086070)
32. Sothornvit, R., & Krochta, J. M. (2001). Plasticizer effect on mechanical properties of-lactoglobulin films. Journal of Food Engineering, 50, 149-155. (Pubitemid 32997793)
33. Stuchell, Y. M., & Krochta, J. M. (1994). Enzymatic treatments and thermal effects on edible soy protein films. Journal of Food Science, 59(6), 1332-1337.
34. Tsai, A. C., Vinik, A. I., Lasichak, A., & Lo, G. S. (1987). Effects of soy polysaccharides on postprandial plasma glucose, insulin, glucagon, pancreatic polypeptide, somatostatin, and triglyceride in obese diabetic patients. The American Journal of Clinical Nutrition, 45, 596-601. (Pubitemid 17046216)
35. Xiao, Q., Lim, L.-T., & Tong, Q. (2012). Properties of pullulan-based blend films as affected by alginate content and relative humidity. Carbohydrate Polymers, 87, 227-234.